Hey everyone! Thank you very much for all of the feedback and comments on this build! Since building it, I have put it through the paces in the shop and it is doing amazingly well! A lot of you have asked about my dust port on my cordless circular saw. It is a customized Ridgid Brushless circular saw that I cut the guard on and used epoxy to mount an old Shop Vac nozzle into. I am putting together content for a RUclips video explaining why and how I did it as well as how it is holding up. Thanks again and stay tuned for more! Casey
What I like about this video is you don’t waste time telling us what you’re about to do. Seeing it happen and explaining it as it goes along is a better use of my time than getting ticked off with endless explanation of what you’re about to see.
Thank you for the comment and feedback. I try to make content based on what I like to learn from. I am a visual learner with instruction. Hearing someone tell me what they are going to do isn’t worth it to me. Thanks for watching!
I bought this for my friend for his birthday as we just moved into a new house and he finally has room for a workshop. The bench was very easy to set up ruclips.net/user/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh They center support is a little difficult to snap in and out of place at first but at least then we know the bench is secure. It was a pleasant surprise when we saw it came with clamps. I apparently missed that in the description. My friend loves the versatility of the bench. Great starter bench for his workshop and easily transportable all over our property. I wish the bench was a little taller but the other features of the bench more than make up for that.
New to wood work but 20 years metal experience. Been searching videos for days. Happy I found this one. Christmas one day early. I'm aware already Kregg is the truth but thank you for making this video. This is my permanent work bench I'm going to replicate your work man. Than you. I will comment again once I finish. Thanks again to you for your time and Kregg for the greatest jigs ever made to the DIY. Happy holidays.
Skip the music the talking is way more exciting. Nice project. I made the drawer bottoms from a fine mash material and put a slide out piece of thin plywood on the bottom of the cabinet collecting all the dust what would be accumulate otherwise in the drawers. Thanks for sharing.
Couldn’t agree more. Music can be a powerful mood controller for a video but it should be so low that it never breaks into the viewer’s consciousness. Your best point is that we came to hear the insights of this clever fabricator, and that’s music to our ears😅
Lucky to be sponsored a fre bench it has inspired me to replicate your bench im a new woodworker at 62, but have all the technical skills, so will use them on this amazing project. Thank you sir for sharing 🙏
Thank you Phil! The thing is a tank and is up for most tasks! I had it out in the driveway last night and people were driving by slowly and looking at it. 😊
Really glad I discovered your channel! I know this one is from 4 years ago, but as with your recent sled build, this outfeed/work table is pretty much just the design I’ve been looking for. Most excellent!
Same here....been racking my brain trying to come up with a good design. I love this table! Gonna do my best to reproduce it. Thanks for the great video!
I've been looking for a video like this for months.. Most woodworking channels use too many fancy tools to do their projects. You did this project with simple tools w/ the same, if not better results than most other woodworking channel would've done. You just earned a sub my friend.
Why thank you! I used what I had in my shop and you can really build this without fancy looks. Its all in what you have available and how you want the bench to look. Thanks again! 👍🏻
Honest question. If you think this was built with simple tools what videos have you seen, channel?, and what fancy tools are you talking about. Not everyone has a nice table saw or all the pocket hole products he uses or even a router. This table has got to be the best I've seen yet though.
Thanks for the question. All of my tools are run of the mill big box store tools that are readily available and affordable. Technically, you could build this table with a drill/ impact, circ saw, and a jig saw. The sanders and routers are all for superficial reasons. I do this for a hobby that sometimes pays for itself. So when I get some funds, they go to buy new tools. Thats all. Thanks again and I appreciate the feedback and the compliment. The table has been awesome in my shop since it was built. Just used it tonight. 👍🏻👍🏻
@@Hood.Housekeeping you clearly haven't seen other people's videos making this type of workbenches, but like he said, you could always buy those inexpensive tools anywhere and still get the job done. And if you don't have half of the tools he used, you should really look into investing into some before planning to build a workbench lol
I know what you’re saying and my tools have improved over the years so I am not far off your target. I do this for a cash earning hobby and am extremely fortunate that I can do it at this level and work with cool companies. Thanks for watching!
That is an awesome table. I’m a rookie and just beginning to develop my skills and videos like yours really help and also help with setting goals. Thank you.
I'll be building my table in a couple months, I've been looking for a simple and strong design with tons of functionality. I've come across some incredible tables, but they're too complex and or they have every machine and tool to help them. Anyway I'll be add this design to my list of about 5 tables i not only like but can build at my current skill level. 👍
Maybe under the overhanging end you could install a paper reel to pull up over the tabletop when doing glue-ups or finishing. Just a couple holes, a rod with end caps, and the paper reel and you're in business.
You know, I thought about that and just never implemented it. Currently, that is where my vertical clamping table saw jig is stored. Fits perfectly, so much so, that I forget its there! LOL. Thanks for watching!
Thanks for the video. I made several outfeed tables for my shop but the latest one really acts as a 4' x 8' layout table, an infeed table at the exact height to my table saw (cutting a 4' x 8' of sheet goods is easy now) and a storage center for scraps of different lengths of wood. I made the wood storage spaces to different lengths ranging from 24" to six feet. I now don't need a shelf system on one of my walls taking up critical shop space. I also bought some really great wheels with locks at Rockler's so I can move my the table any time I need the room. Really enjoyed watching your project!
Awesome Ed! I agree that wood storage robs the shop of critical space. I like the idea of sliding it into the bench! Sounds like your shop is well set up! Thanks and take care!
Never saw you do anything crazy complex but you made an amazing bench. Best kind of video. Awesome product and something an amateur can do with a bit of care and time. Great Job!!
CReeves Makes, lol that would make your video even better. nice work btw. to bad you couldn't get the black melamine top in half inch. the bevel edge adds a nice dimension tho. enjoy your awesome table!!
Nice table. With what kreg charge's for their merchandise they can certainly afford to hook you up CR that's for sure. I don't blame you for getting a few cents of their $30,000,000 a year advertising bubget. Good job!
The 90° pockethole clamps? Yes and yes they will make any pockethole joinery project easier. If you do any plywood work, check out the Kreg corner clamps as well. Those are really nice.
@@CReevesMakes Actually I dont have any kind of these tools , but as long as I watch any videos that contained this brand, absolutely I wud say , *they make this job easily* .. indeed
I’ve watched about a hundred bench videos and I think this one is my favorite. How many hours did it take you to do this ? I want to make sure I budget enough time.
I do this as a hobby so it took a long time for me but I would say a solid week or so depending on availability. Figure a day to get and cut materials, a day to cut slots and build the torsion box, a day to build the base and the drawers, and a day to do the tracks and melamine stuff. That’s 4 solid days so, yeah a week with some forgiveness built in. Good luck and thank you very much. I have a link on my website for all the things I use in my shop and in my projects. They are affiliate links so it helps support what I do in my shop. Thanks
if you didn't get it - this was a kreg marketing promo - also MICROJIG! hahaha Nice project man, but honestly if you didn't receive any money and/or free tools from kreg be sure to mention that in the video. Otherwise it's a nice project which you put a lot of work into but really is just an infomercial.
I did mention at the end that the video was sponsored by Kreg. I will definitely say it in the beginning for the next video. Thank you for the input and feedback. - Casey
AWESOME TABLE! I was looking for a good assembly table to build because I just bought a new table saw. This table is perfect because you and I have the same saw. Thanks a lot.
I see you have Kreg everything... I suppose they subsidized this Kreg commercial you made... LOL. Nice work, but having all their gadgets is not a reality for most.
Hey Bob, yes the video was sponsored by them to promote their clamping and cabinet building accessories. I build alot of cabinet style and craft style projects and this is the perfect setup for me. I agree that most people will not need or pay for all of this product, but it shows the capability.
Sure i figured. I have been making high end cabs and furniture for 30+ years and had the screw pocket jig when it first came out in the early 90's.. Didnt use it very often. IMO its not good to use any one system bc it limits what a person will learn when it comes to how things can be done and all the options you have.
I agree Bob, I see its limitations and I have been wanting to test other forms of joinery as I grow in my hobby. For the jobs I have completed to this point, the pocket holes have been a great way to produce quick and strong results. Thanks for the feedback. 👍🏻
Good video... well done on clear instruction. Mostly I watched this because I didn't know much about Kreg tools, so for it was effectively a 15 minute commercial for Kreg clamps. You've converted me to the Kreg system.
Well thank you very much! I wanted to show the versatility of the products and how I use it. Glad you got the information you needed/wanted and good luck! 👍🏻
Like many of the other guys, I am upgrading and old work bench. So, you have some great ideas, that I am going to use! Now that I see how easy it was. Great video, great craftsmanship! That is an impressive bench. You gotta love that mobility too.
@@CReevesMakes . Heck yeah! The older I've gotten, the more modular my life has become. My favorite is a rolling outdoor cooking table, with full size sink.
@@CReevesMakes I cheated- I had acquired (for free) several large (6'), commercial stainless steel, kitchen style, tables with galvanized bottom shelf and legs. Added caster wheels, cut hole for the standard size S.S. sink. Added a water hose & adapter, for the cold water supply line. Plumbed the drains into a 3 gallon bucket. Painted the top and shelf. Wrapped and glued rope around the legs. Boom...Pool Party - Rolling kitchen sink, grilling, prep, bar table! That can get wet!
@@CReevesMakes Money/screws shouldn't matter as long as your doing something you enjoy doing. I plan to build a similar build and I plan to use plenty of Kreg screws. CReeves keep on building!!!!!!!
Servus Sebastian, auch hier mal wieder ein sehr informatives Video über die Maschinen. Dank dir habe ich mir schon die ein oder andere Maschine gekauft oder auch nicht. Was ein Glück habe ich deine Videos gefunden. Daumen hoch, weiter so. :-)
I recently built this and am happy with the results. Casey did a great job and put a lot of thought into the design. I would recommend the project but there are a few things I would do differently. I paid a premium price for MDF with a laminate top and wish I had just bought the laminate myself and glued it to hardwood ply. The reason? You have to screw through the ply underneath the MDF to attach it and screws do not work well in MDF. In that regard, plywood isn't that great either, but it's much better that MDF! And I experimented with every method - different pilot holes, etc. Also, be careful where you put the third crosspiece on the torsion box. The metal track sits right above it and there is not a lot of wiggle room to get the screws in. And he doesn't mention it, but you can't put the last crosspiece in until the very end of the build because the screws from the rear metal track have to be in first. And you'll need to notch out the crosspiece to accommodate them. That's not an issue though. Unlike the video, I routed out for the vise before I attached it to the box. It was much easier, and I don't have the freehand skills Casey does. All in all, it's a project well worth the time and effort to complete it.
Thank you very much for the review Mark! I appreciate all of your information. In retrospect, I think I would have added threaded inserts and bolts to hold the top on. It’s a more secure way to align and lock everything down. When you change out the top, just remove the inserts and use them on the new piece. I also should have done the vice locations before finishing but it was a last minute idea. The track bolts and the torsion box was also a last minute “what do I do now” moment. Thanks for all the support and for building this plan!
I sure hope that Kreg gave you all that stuff for free as there isn't many scenes that do not show something made by them! Also, the video was done very well and professional but the BEST part of the video that I enjoyed was seeing that your wife (I assume) was there helping you along the way. I wish my wife would get involved with my woodworking projects like that! You Sir have a keeper!
The video was sponsored by Kreg, yes. I love when my wife comes out and we can work through a project together and enjoy eachothers time. Start with something small and simple for the house or for a gift for a loved one and work from there. It may come. Thanks!
spectacular bench. Nice job. I have a Ron Paulk style assembly table very similar to what you made. I used dog holes instead of the kreg clamp system. If I made it again, I might go your route.
Thanks John! Yeah I initially thought about the dog hole route but didnt want to spend all that time marking and drilling . I use a lot of small screws in some projects and I would just be knocking those into the holes all day long LOL. Thanks again and have a great day!
Thanks for this video. I've been looking to make a bench to replace my wobbly sawhorses and plywood top for a while. This is pretty much perfect for me because I love Kreg tools as well. Also thanks for making the plans for free on your website with a step by step instruction guide. This will make it really easy for me to follow along on my shop computer. I'm going to start on this next weekend! :)
Thank you very much and good luck! Feel free to ask me questions if you hit any snags. Also, please rate and review the project on plans website! That means a lot to me and helps me to know that everything is relayed to everyone clearly. Thanks and take care. Have fun!
Master Revolution! О, да! Вы серьёзно поработали, этот стол почти шедевр. Только неучем вроде меня его сделать нереально! У вас есть опыт, средства, и скорее всего образование для работы по дереву.
This table is absolutely gorgeous!! It is sturdy, functional and full of clever design elements. One serious flaw however, is that it is MUCH too beautiful to actual use as you might do something to cause a blemish in the table! Great job designing, building and narrating.
Haha! Thanks John! It is a beaut and she has been through a lot and still looks and works perfect. The top is a little rough from some large glue ups but it is still flat and smooth and takes abuse really well. Thanks
![State of Play | September 24, 2024 [ENGLISH]](http://i.ytimg.com/vi/fVs0suPHAX8/mqdefault.jpg)
Hey everyone! Thank you very much for all of the feedback and comments on this build! Since building it, I have put it through the paces in the shop and it is doing amazingly well! A lot of you have asked about my dust port on my cordless circular saw. It is a customized Ridgid Brushless circular saw that I cut the guard on and used epoxy to mount an old Shop Vac nozzle into. I am putting together content for a RUclips video explaining why and how I did it as well as how it is holding up. Thanks again and stay tuned for more!
Casey
I have the Ridgid MS255SR sliding miter saw. It is an older model that I rehabbed and spruced up.
Thank you for the comments! I hope to get into some metal and welding in the future.
There are no plans available for this on your website. Are there plans available somewhere else? Thanks.
The plans for this build are in the link in the video description. Www.buildsomething.com
@@CReevesMakesGot it, thanks!
What I like about this video is you don’t waste time telling us what you’re about to do. Seeing it happen and explaining it as it goes along is a better use of my time than getting ticked off with endless explanation of what you’re about to see.
Thank you for the comment and feedback. I try to make content based on what I like to learn from. I am a visual learner with instruction. Hearing someone tell me what they are going to do isn’t worth it to me. Thanks for watching!
I bought this for my friend for his birthday as we just moved into a new house and he finally has room for a workshop. The bench was very easy to set up ruclips.net/user/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh They center support is a little difficult to snap in and out of place at first but at least then we know the bench is secure. It was a pleasant surprise when we saw it came with clamps. I apparently missed that in the description. My friend loves the versatility of the bench. Great starter bench for his workshop and easily transportable all over our property. I wish the bench was a little taller but the other features of the bench more than make up for that.
Awesome! Glad it worked out for you and congrats to you and your friend!!
Kreg bought a company car off this dudes workbench. It’s like a blue Mercedes in your garage and I’m beyond jealous😍
New to wood work but 20 years metal experience. Been searching videos for days. Happy I found this one. Christmas one day early. I'm aware already Kregg is the truth but thank you for making this video. This is my permanent work bench I'm going to replicate your work man. Than you. I will comment again once I finish. Thanks again to you for your time and Kregg for the greatest jigs ever made to the DIY. Happy holidays.
Thanks for watching!
Skip the music the talking is way more exciting. Nice project. I made the drawer bottoms from a fine mash material and put a slide out piece of thin plywood on the bottom of the cabinet collecting all the dust what would be accumulate otherwise in the drawers. Thanks for sharing.
Couldn’t agree more. Music can be a powerful mood controller for a video but it should be so low that it never breaks into the viewer’s consciousness. Your best point is that we came to hear the insights of this clever fabricator, and that’s music to our ears😅
Lucky to be sponsored a fre bench it has inspired me to replicate your bench im a new woodworker at 62, but have all the technical skills, so will use them on this amazing project. Thank you sir for sharing 🙏
Thank you very much! Good luck and have fun!
Wow! definitely one of the nicest benches I've seen, well made, super sturdy and with a ton of really clever features.
Thank you Phil! The thing is a tank and is up for most tasks! I had it out in the driveway last night and people were driving by slowly and looking at it. 😊
Really glad I discovered your channel! I know this one is from 4 years ago, but as with your recent sled build, this outfeed/work table is pretty much just the design I’ve been looking for. Most excellent!
Same here....been racking my brain trying to come up with a good design. I love this table! Gonna do my best to reproduce it. Thanks for the great video!
Thanks and good luck Miguel! Check out the build plans on www.BuildSomething.com !
Boy that is going to take a ton of glue and popsicle sticks then....
Beautiful….great job. Built a large assembly/work bench a couple years ago. Invaluable piece.
I've been looking for a video like this for months.. Most woodworking channels use too many fancy tools to do their projects. You did this project with simple tools w/ the same, if not better results than most other woodworking channel would've done. You just earned a sub my friend.
Why thank you! I used what I had in my shop and you can really build this without fancy looks. Its all in what you have available and how you want the bench to look. Thanks again! 👍🏻
Honest question. If you think this was built with simple tools what videos have you seen, channel?, and what fancy tools are you talking about. Not everyone has a nice table saw or all the pocket hole products he uses or even a router. This table has got to be the best I've seen yet though.
Thanks for the question. All of my tools are run of the mill big box store tools that are readily available and affordable. Technically, you could build this table with a drill/ impact, circ saw, and a jig saw. The sanders and routers are all for superficial reasons. I do this for a hobby that sometimes pays for itself. So when I get some funds, they go to buy new tools. Thats all. Thanks again and I appreciate the feedback and the compliment. The table has been awesome in my shop since it was built. Just used it tonight. 👍🏻👍🏻
@@Hood.Housekeeping you clearly haven't seen other people's videos making this type of workbenches, but like he said, you could always buy those inexpensive tools anywhere and still get the job done. And if you don't have half of the tools he used, you should really look into investing into some before planning to build a workbench lol
A great workbench, it give my new ideas for my workbench. Thankyou 🏆
Always appreciate more relatable videos where people aren't using $30,000 festool and grizzly setups
I know what you’re saying and my tools have improved over the years so I am not far off your target. I do this for a cash earning hobby and am extremely fortunate that I can do it at this level and work with cool companies. Thanks for watching!
Well done. Really like the black top, all the clamping options, and the drawers.
Thanks Daniel! It is a very versatile setup. Handy in most projects! 👍🏻👍🏻
Excellent how you point out issues as they arise.
Wow that looks like a store bought table. Super clean yet very functional! 👍
Thank you very much! It feels like a store bought table.
That is truly a stunning and very versatile work table. Well done!
Thanks Col45t! 👍🏻👍🏻
Bonjour, c'est tout simplement magnifique !
Bravo !
Thank you! Merci beaucoup!
;-)
That is an awesome table. I’m a rookie and just beginning to develop my skills and videos like yours really help and also help with setting goals. Thank you.
Thank you and good luck Tom! Have fun!
I'll be building my table in a couple months, I've been looking for a simple and strong design with tons of functionality. I've come across some incredible tables, but they're too complex and or they have every machine and tool to help them. Anyway I'll be add this design to my list of about 5 tables i not only like but can build at my current skill level. 👍
A really beautiful job. You put lots of thought into that and it has turned our magnificently.
Thank you very much!
Nice work! This was satisfying to watch and super informative thank you!
Thank you very much! That means a lot to me. 👍🏻
I use kreg too and you can’t beat the products!! Nice build!!!
i just saw a 14 minute commercial for kreg 😕
Funny how they sponsored the video...isnt it?
Excellent results, well thought out and very LEAN design. Thanks for sharing!! Jack
Thanks I appreciate that!
A thoroughly enjoyable video to watch, love what Kreg makes to make our lives easier 🔨🔨👍👍👍
Thank you very much! They sure do make it easy!
Awesome looking table.
A fine example of ad placement.
(Sure hope Kreg sponsored this video. ;) )
LOL Tim! Yeah it was sponsored so thats why there was so much blue and "Kreg" going on. Thanks!
Hi Casey thank you so much for sharing this beautiful piece of work. All I can say is "wow I wish I had this beautiful bench".
Thank you for the comments and for watching!
Maybe under the overhanging end you could install a paper reel to pull up over the tabletop when doing glue-ups or finishing. Just a couple holes, a rod with end caps, and the paper reel and you're in business.
You know, I thought about that and just never implemented it. Currently, that is where my vertical clamping table saw jig is stored. Fits perfectly, so much so, that I forget its there! LOL. Thanks for watching!
I love wood!!!
Its smell.
Its color.
Its view.
Exactly! Thanks! 👍🏻👍🏻
Casey, awesome video! So professional too. I have to build one of these for myself for sure! Again, really really well done.
Thank you very much Marie! That means a lot to me!
Awesome project! Very clean design that I'm sure will give you many years of good use.
Thank you Keith! Thats what my goal was/is! 👍🏻
Great build!
Thank you very much! Love your videos and your torsion bench build! 👍🏻👍🏻👍🏻👍🏻
This is my second look as I plan my garage. I like the Kreg sidetrack for the clamps and will use that.
I could never do this. I seem to cut a board 3 times and it's still too short.
You gotta cut on the other side.
@@Weshopwizard
But I'm right handed.
@@NunYa953 flip it over then.
@@Weshopwizard
BRILLIANT!
@@Weshopwizard
God dammit. That didn't work!
Thanks for the video. I made several outfeed tables for my shop but the latest one really acts as a 4' x 8' layout table, an infeed table at the exact height to my table saw (cutting a 4' x 8' of sheet goods is easy now) and a storage center for scraps of different lengths of wood. I made the wood storage spaces to different lengths ranging from 24" to six feet. I now don't need a shelf system on one of my walls taking up critical shop space. I also bought some really great wheels with locks at Rockler's so I can move my the table any time I need the room. Really enjoyed watching your project!
Awesome Ed! I agree that wood storage robs the shop of critical space. I like the idea of sliding it into the bench! Sounds like your shop is well set up! Thanks and take care!
Looks better in person...I know :) excellent video.
Ha! Thanks Chris! Next time, we will have more time and we can have a couple drinks and a few more stories....maybe a Live? 👍🏻
CReeves Makes a live?!?! Hmmmmmm...I could be down for that.
Never saw you do anything crazy complex but you made an amazing bench. Best kind of video. Awesome product and something an amateur can do with a bit of care and time. Great Job!!
Thanks Tige! Yeah just basic work and simple joinery. Sometimes basic is best.
how ppl give u a thumbs down??? u rock dude!!!
Cant please everyone man! Thanks for the compliment! 👍🏻👍🏻
Jealousy
Haha thanks!
I love the fact you and your wife help each other during this build 💕💕💕 hope she is well !
Thanks! We have a lot of fun building together! Thanks 🙏🏻 we are doing as good as we can!
new drinking game, Everytime he says Kreg, take a swig
I wonder if I should take a drink while doing the voice-over every time I say Kreg. That would be entertaining by the end!
CReeves Makes, lol that would make your video even better. nice work btw. to bad you couldn't get the black melamine top in half inch. the bevel edge adds a nice dimension tho. enjoy your awesome table!!
Very cool build , Kreg has a great product line , looking forward to watching more of your videos
Thank you guys! I really like Kregs fixturing capabilities. Thanks for watching!
Nice table. With what kreg charge's for their merchandise they can certainly afford to hook you up CR that's for sure. I don't blame you for getting a few cents of their $30,000,000 a year advertising bubget. Good job!
Nice job. Table looks great. Picked up some great ideas from watching the video. Thanks for the time you took to make it.
Thank you very much Angela! I am glad you liked it and got something out of it. 👍🏻
Brought to you by Kreg.
AWESOME renovating my work shop with expansion in late august. I will be building this out feed table for sure love it .
Awesome Roger! Cant wait to see it done! 👍🏻👍🏻
I never would've known he was sponsored by kreg until he said something...
Make it a drinking game! LOL
do/ if you have kreg angle clamps ( do or if ) they make this job easy
The 90° pockethole clamps? Yes and yes they will make any pockethole joinery project easier. If you do any plywood work, check out the Kreg corner clamps as well. Those are really nice.
@@CReevesMakes Actually I dont have any kind of these tools , but as long as I watch any videos that contained this brand, absolutely I wud say , *they make this job easily* .. indeed
It looks amazing contrast , now I have a very good idea what to do for my personal workbench in home thanks for sharing
Thank you very much! Good luck in your builds!
This thing is sturdy as hell. I've sold a ton of these.
So you make these benches for other people? Why wouldn't they make them for themselves?
@@Belg1970 Gifts, starter benches. Thanks for your grumpy skepticism! :)
@@jesuspectre9883 Wow GRUMPY?? just asked a question.
@@Belg1970 Thanks, Santa Claus! Have a good one! :)
How much do you get for one of the benches that you build?
really nice looking and functional work bench. Thanks for sharing casey.
Thanks Matthew! I appreciate that!
I’ve watched about a hundred bench videos and I think this one is my favorite. How many hours did it take you to do this ? I want to make sure I budget enough time.
I do this as a hobby so it took a long time for me but I would say a solid week or so depending on availability. Figure a day to get and cut materials, a day to cut slots and build the torsion box, a day to build the base and the drawers, and a day to do the tracks and melamine stuff. That’s 4 solid days so, yeah a week with some forgiveness built in. Good luck and thank you very much. I have a link on my website for all the things I use in my shop and in my projects. They are affiliate links so it helps support what I do in my shop. Thanks
AWESOME setup! Thanks for sharing and it helped me visualize what I would like in my next workbench build. Keep the sawdust flyin' :)
kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg kreg
if you didn't get it - this was a kreg marketing promo - also MICROJIG! hahaha
Nice project man, but honestly if you didn't receive any money and/or free tools from kreg be sure to mention that in the video. Otherwise it's a nice project which you put a lot of work into but really is just an infomercial.
LOL, Yeah, I was joking with another subscriber about making it into a drinking game.
I did mention at the end that the video was sponsored by Kreg. I will definitely say it in the beginning for the next video. Thank you for the input and feedback. - Casey
I'm in Brazil and I saw your video, Perfect. Success to all.
Excellent! Thank you very much! 👍🏻
From a seasoned 🇬🇧 carpenter. You got some great skills brother! Subbed and looking forward to your next videos!? 👊👊
Thanks Silver Fox! I appreciate that! More to come for sure!
AWESOME TABLE! I was looking for a good assembly table to build because I just bought a new table saw. This table is perfect because you and I have the same saw. Thanks a lot.
Awesome! Thank you!
You'd think that if Kreg sponsored this video, you could at least mention them once or twice lol
Amazing finish product .. well done
Thank you very much! 🙏🏻
I see you have Kreg everything... I suppose they subsidized this Kreg commercial you made... LOL. Nice work, but having all their gadgets is not a reality for most.
Hey Bob, yes the video was sponsored by them to promote their clamping and cabinet building accessories. I build alot of cabinet style and craft style projects and this is the perfect setup for me. I agree that most people will not need or pay for all of this product, but it shows the capability.
Sure i figured. I have been making high end cabs and furniture for 30+ years and had the screw pocket jig when it first came out in the early 90's.. Didnt use it very often. IMO its not good to use any one system bc it limits what a person will learn when it comes to how things can be done and all the options you have.
I agree Bob, I see its limitations and I have been wanting to test other forms of joinery as I grow in my hobby. For the jobs I have completed to this point, the pocket holes have been a great way to produce quick and strong results. Thanks for the feedback. 👍🏻
I like it! Very well thought out design, and it looks very good.
Thanks! 👍🏻👍🏻
Good video... well done on clear instruction. Mostly I watched this because I didn't know much about Kreg tools, so for it was effectively a 15 minute commercial for Kreg clamps. You've converted me to the Kreg system.
Well thank you very much! I wanted to show the versatility of the products and how I use it. Glad you got the information you needed/wanted and good luck! 👍🏻
Супер!!! ЛаиК!!!
Awesome project! What a great looking and useful bench. Nicely done!
Thank you very much!! I appreciate that! 👍🏻
Like many of the other guys, I am upgrading and old work bench. So, you have some great ideas, that I am going to use! Now that I see how easy it was. Great video, great craftsmanship! That is an impressive bench. You gotta love that mobility too.
Thanks Chris! I appreciate that. The mobility is very much appreciated!
@@CReevesMakes . Heck yeah! The older I've gotten, the more modular my life has become. My favorite is a rolling outdoor cooking table, with full size sink.
Oh wow! that sounds awesome! What woods did you use? Concrete top?
@@CReevesMakes I cheated- I had acquired (for free) several large (6'), commercial stainless steel, kitchen style, tables with galvanized bottom shelf and legs. Added caster wheels, cut hole for the standard size S.S. sink. Added a water hose & adapter, for the cold water supply line. Plumbed the drains into a 3 gallon bucket. Painted the top and shelf. Wrapped and glued rope around the legs. Boom...Pool Party - Rolling kitchen sink, grilling, prep, bar table! That can get wet!
I wish I had the money this guy wastes on Kreg screws.
Ha! when your video is sponsored, you dont have to pay for the screws.
@@CReevesMakes Money/screws shouldn't matter as long as your doing something you enjoy doing. I plan to build a similar build and I plan to use plenty of Kreg screws.
CReeves keep on building!!!!!!!
Great build and even better video production! Great watch. Thank you.
Thanks Frank!
Servus Sebastian, auch hier mal wieder ein sehr informatives Video über die Maschinen. Dank dir habe ich mir schon die ein oder andere Maschine gekauft oder auch nicht. Was ein Glück habe ich deine Videos gefunden. Daumen hoch, weiter so. :-)
Fantastic bench.. Adding drawer liners was a Smart touch!
Thank you Jeff! They definitely help keep things in place when rolling it around! 👍🏻
Love this build! Thanks and gonna build one for myself.
Hey thank you for the comment and good luck with your own build! 👍🏻🤜🏻
Very nice Job Casey. . . . keep doing this please. . . .. 👍👍👍
Thanks Miguel! Working on another build now! Stay tuned! 👍🏻👍🏻
I recently built this and am happy with the results. Casey did a great job and put a lot of thought into the design. I would recommend the project but there are a few things I would do differently. I paid a premium price for MDF with a laminate top and wish I had just bought the laminate myself and glued it to hardwood ply. The reason? You have to screw through the ply underneath the MDF to attach it and screws do not work well in MDF. In that regard, plywood isn't that great either, but it's much better that MDF! And I experimented with every method - different pilot holes, etc. Also, be careful where you put the third crosspiece on the torsion box. The metal track sits right above it and there is not a lot of wiggle room to get the screws in. And he doesn't mention it, but you can't put the last crosspiece in until the very end of the build because the screws from the rear metal track have to be in first. And you'll need to notch out the crosspiece to accommodate them. That's not an issue though. Unlike the video, I routed out for the vise before I attached it to the box. It was much easier, and I don't have the freehand skills Casey does. All in all, it's a project well worth the time and effort to complete it.
Thank you very much for the review Mark! I appreciate all of your information. In retrospect, I think I would have added threaded inserts and bolts to hold the top on. It’s a more secure way to align and lock everything down. When you change out the top, just remove the inserts and use them on the new piece. I also should have done the vice locations before finishing but it was a last minute idea. The track bolts and the torsion box was also a last minute “what do I do now” moment. Thanks for all the support and for building this plan!
What a great looking bench! Thanks for the video
Thanks for watching!!!
Nice work... as a finish carpenter, luv the attention to details
Thank you very much John! 👍🏻👍🏻
I sure hope that Kreg gave you all that stuff for free as there isn't many scenes that do not show something made by them! Also, the video was done very well and professional but the BEST part of the video that I enjoyed was seeing that your wife (I assume) was there helping you along the way. I wish my wife would get involved with my woodworking projects like that! You Sir have a keeper!
The video was sponsored by Kreg, yes. I love when my wife comes out and we can work through a project together and enjoy eachothers time. Start with something small and simple for the house or for a gift for a loved one and work from there. It may come. Thanks!
Great build! Thanks for sharing!
Thanks for watching!
just finished making one of these tables last week. works so good in my shop. thanks for the plans and the video! they really helped a lot.
Thanks Todd and glad that you built it and like it! Glad it worked out! Anything that you did different or all to plan?
Amazing looking work bench and great video. Thanks for sharing.
Thank you very much Th Brink! I appreciate that.
That is a fantastic design! GREAT JOB!
Thank you very much David! 👍🏻👍🏻
spectacular bench. Nice job. I have a Ron Paulk style assembly table very similar to what you made. I used dog holes instead of the kreg clamp system. If I made it again, I might go your route.
Thanks John! Yeah I initially thought about the dog hole route but didnt want to spend all that time marking and drilling . I use a lot of small screws in some projects and I would just be knocking those into the holes all day long LOL. Thanks again and have a great day!
Great job blending two styles together appreciate the video,
Thank you Steve! I really think the "hybrid" works with this setup. Very functional.
Can't wait to start! Thanks for all your great projects...
Thanks for this video. I've been looking to make a bench to replace my wobbly sawhorses and plywood top for a while. This is pretty much perfect for me because I love Kreg tools as well. Also thanks for making the plans for free on your website with a step by step instruction guide. This will make it really easy for me to follow along on my shop computer. I'm going to start on this next weekend! :)
Thank you very much and good luck! Feel free to ask me questions if you hit any snags. Also, please rate and review the project on plans website! That means a lot to me and helps me to know that everything is relayed to everyone clearly. Thanks and take care. Have fun!
Great table and great video. Thanks for sharing!
Thanks Deke!
Master Revolution! О, да! Вы серьёзно поработали, этот стол почти шедевр. Только неучем вроде меня его сделать нереально! У вас есть опыт, средства, и скорее всего образование для работы по дереву.
This table is absolutely gorgeous!! It is sturdy, functional and full of clever design elements. One serious flaw however, is that it is MUCH too beautiful to actual use as you might do something to cause a blemish in the table! Great job designing, building and narrating.
Haha! Thanks John! It is a beaut and she has been through a lot and still looks and works perfect. The top is a little rough from some large glue ups but it is still flat and smooth and takes abuse really well. Thanks
This one is the best on youtube. Great for diy, looks like pro. Awesome job man!
Thanks for watching abs thank you very much!
Great bench! I have watched this video 3 times now. This is my next shop project. Thanks and great job!
Why thank you very much Randy! That means a lot to me and what I do. Motivation Monday! 👍🏻👍🏻
I got to say your out feed table is beautiful. Nice work.
Thank you very much Chris! Its almost too nice to work on!
Excellent work. I like the black top, looks real good.
Thank you very much Daniel! I really like it too...pain to keep clean, but I love it. 👍🏻
Nice project. The black melanin top really sets off the whole table.
Thanks!
Great looking table, and features. I like the side vise.
Thank you very much!
That looks great! I like the color scheme you have going. 👍🏻👍🏻
Thanks Lisa👍🏻
Fantastic job and a great looking bench.
Thank you!
Looks like a great work platform if you have to work 8 feet up or so for an extended time...plenty sturdy clean and functional. ..👍👍👍
Exactly! Its a blessing having this table now. Builds are quick and easy! 👍🏻👍🏻
Extremely well done!! Love the black melamine.
Thank you!
From Argentina, Buenos Aires. Excellent work congratulations
Thank you very very much! I appreciate it and thanks for watching!
Bravissimo! Bellissimo tavolo da lavoro, fatto a perfezione! Grazie per questo magnifico video !
Глобально и очень здорово
Прекрасная работа!!!