*Solid, **Fastly.Cool** and gets the job done. For rooms where window-mounted air conditioning is not an option, this works very well. Easy set up, rapid cooling, and great design.*
Purchased: August 2023 - still works GREAT!I ruclips.net/user/postUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn live in a studio and during the summer it gets scorching hot - really old building with no ac units. I can’t express how EASY it was to install. This unit has been a life savior during the summer and some days during other seasons where it can still be a bit warm at night. In this small place is my friend, a husky, poodle mix and myself. We need AC - lolI don’t use the dehumidifier option - I’m not sure if it will leak in my house, since I did not install the small draining hose that came with it. May look into it late but I don’t worry about much humidity in the apartment. I don’t understand why the negative reviews since all things mentioned, I personally did not find issues with. Definitely worth it!
I appreciate your effort to demonstrate that, but I would like to recommend you to play it safe and make sure the job setup has no physics uncertainties / issues. I mean this easy example should nicely converge, but it doesn't. Thank you
El tutorial es muy bueno. Me ha ayudado a resolver varias dudas sobretodo en el postprocesado, que no tenia muy claro como funcionaban los parámetros de animación.
At time 4:38 you converted the geometry from solid to fluid.. can any one explain the reason for converting solid to fluid. Please comment inlet velocity in practical conditions?
Nagu sattenapalli i don’t know much about this programme but if you look at it he made a better view out of it by converting the solid view to fluid , he just made the walls transparent
With flow speeds that high those air would not be laminar either. The reynolds number is far too high. This video is a showcase of ANSYS but should not be used to replicate for CFD analysis.
Please make a video on Swirl Flow in a beaker having water in the beaker with a magnetic stirrer. First without any hindrance in the beaker, then with hindrances in the beaker (like semi-circular, triangular, and rectangular hindrance). Thanks.
hi, guys, can anyone help me in solving this " how can I create a single body geometry in Design Modeler since I have 38parts and bodies of my imported geometry". Thanks in advance
*Solid, **Fastly.Cool** and gets the job done. For rooms where window-mounted air conditioning is not an option, this works very well. Easy set up, rapid cooling, and great design.*
Purchased: August 2023 - still works GREAT!I ruclips.net/user/postUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn live in a studio and during the summer it gets scorching hot - really old building with no ac units. I can’t express how EASY it was to install. This unit has been a life savior during the summer and some days during other seasons where it can still be a bit warm at night. In this small place is my friend, a husky, poodle mix and myself. We need AC - lolI don’t use the dehumidifier option - I’m not sure if it will leak in my house, since I did not install the small draining hose that came with it. May look into it late but I don’t worry about much humidity in the apartment. I don’t understand why the negative reviews since all things mentioned, I personally did not find issues with. Definitely worth it!
How come ur performing incompressible model with no pressure outlet
Hello, may I know how to construct the building? I have a difficulty on extrude up to next part, where I am afraid my building isn't appropriate
In the simulation there is a problem, the residuals never converge.
you are absolutely correct, this is a horrible example...
Please explain why the velocity for the inlet is set to 50m/s which is too high for air conditioning system
Yes why it is set to that high
Usually it’s around max 5m/s
I appreciate your effort to demonstrate that, but I would like to recommend you to play it safe and make sure the job setup has no physics uncertainties / issues. I mean this easy example should nicely converge, but it doesn't.
Thank you
El tutorial es muy bueno.
Me ha ayudado a resolver varias dudas sobretodo en el postprocesado, que no tenia muy claro como funcionaban los parámetros de animación.
This is so helpful. Thank you so much
What is the extrude cut 9 ? Please help !!!
At time 4:38 you converted the geometry from solid to fluid.. can any one explain the reason for converting solid to fluid.
Please comment inlet velocity in practical conditions?
Nagu sattenapalli i don’t know much about this programme but if you look at it he made a better view out of it by converting the solid view to fluid , he just made the walls transparent
Because the room is actually a domain
Is it possible to post a tutorial on car park ventilation using jet fans
@GlobalCAD
can I have the CAD file for the this air-conditioning section ?
Can u make simulation for Atmospheric circulation??
Like Hadley cell
plz send iges format..........or upload video how you created in solidworka
why did you choose such a high velocity inlet value 50 m/s ???
With flow speeds that high those air would not be laminar either. The reynolds number is far too high. This video is a showcase of ANSYS but should not be used to replicate for CFD analysis.
Please make a video on Swirl Flow in a beaker having water in the beaker with a magnetic stirrer. First without any hindrance in the beaker, then with hindrances in the beaker (like semi-circular, triangular, and rectangular hindrance). Thanks.
Why are there so many ads
Boundary conditions calculations please
0:33
Hi. Can I get the step. file? Thank you
Can you provide these office model pls
I think there are not enough advertising in your video , add more !!
Excellent #ASKAzad
I am looking for someone to perform service for me on simulation of airflow for indoor cultivation. will provide specs and details.
Yo Im high as fuck why am I watching this video
Hii I need working model of HVAC system for my project. How can I contact you??
It is a crack version Orr license version? Please answer.......
hi, guys, can anyone help me in solving this " how can I create a single body geometry in Design Modeler since I have 38parts and bodies of my imported geometry". Thanks in advance
Use Boolean operation to combine them
Iklan udah kayak warung pecel lele
ha gimana gimana. wkwkw
광고 달아놓은거 살벌하네