If you have a recommendation for a high quality large color laser printer, please share it! The build he was working on when he filmed this: ruclips.net/video/5RL7EYSbc_g/видео.html
Best thing to do is look at manufacture websites. Used to do purchasing for small IT company and had to use purchasing managers at HP, Canon and Kyocera. To get more information on these printers. I think it is done on purpose by companies.
Printer Technician here, it looks like the image is going onto the media OK (no drum or developer fault) however it is coming off in the fuser (hot section). In the printer driver there will be settings to change the thickness (based on media GSM) and also media type (eg labels). Changing these settings will increase the temperature in the fuser and slow down the print speed to ensure the toner is adhered to the media. Check your printer specification to see what media thickness it can handle, most will do 200 - 250gsm (80 - 90lb) and compare that to the sticker paper you are trying to print on. When looking for a new printer make this specification a must have, also check toner prices and yield to work out running costs as they vary quite considerably. Popular makes of toner (laser or LED) printers are Canon, Kyocera, Oki, Lexmark, Xerox, Toshiba, Ricoh so maybe go to their websites to do your research instead of using Google where you will probably be taken to reseller websites who wont list the full specifications. Also consider a commercial grade photocopier not just a consumer printer as the pricing might be similar and you will get a much better machine.
Not a printer tech, so the person I am replying to is more knowledgeable than I, but I used to run the printers for a large data center and they were Ricoh. They were very good printers. Just one guy's experience.
🏆🛠 Mick knows. 🍻 Tell the printer it’s the thckest paper type. Also look for a local reseller catering to graphic businesses. They’ll find the machine you need.
I've not been a printer tech for 15 years (ugh, I feel old) but back then we were very much of the opinion that we'd already hit the point where "photocopiers" really didn't exist anymore. Is there really a functional difference between a Xerox machine and an HP Enterprise-level machine? (Genuine question!) I seem to recall that even a Xerox was a scanner and a laser printer all in the same box, even back in 2006.
Also check to make sure the fuser isn't warped. That can cause the paper to not make contact all the way across and you'll end up with a strip of toner that doesn't stick to the page
"There is more noise than signal now" YEEEEEEEEESSS!!! THANK YOU for saying this Adam-thought it was just me wading through all this nonsense on Google to find anything now!
yes same here! My friend and I say to each other: "google isn't my friend, google f**king hate me...! Grrr%#&#...!" when we have spend hours searching and found "Absolutely NOTHING"!!!
Yea search engines used to be useable... Now they are just a cluster fuck. I'm fairly good at finding what I want via Google but it has just become such a pain to do so. Time to go back to dogpile or something like it's 1999...
I feel validated! I can't believe your level of frustration reached the point that you had to record a rant about this, I was *just* searching for laser printers last week and ran into the exact same issues! It was maddening and I had to give up, I didn't have enough time to go down that rabbit hole.
Yes, search engines no longer supporting the Boolerian filtering combined with the focus of trying to find out what the people "want" instead of what people are "looking for" really cause a huge bubble.
@@bobking7347that’s not true anymore. My old brothers were wonderful but I lost one to an elderly parent and the other was lost in divorce lol. Brother has lost its way
@@bobking7347 Yes specficly im looking into buying Brother HL-L2445DW and I did deep research :) Dont know how it is in USA but I always start by looking at pricerunner and then google stuff...especially youtube reviews.
I've been servicing laser printers for decades, here's my take: Try adjusting your media setting to a heavier weight. Your machine may actually have enough heat, if set correctly. For smaller printers, the fuser is a component you can swap out -- try installing a fresh fuser, as it seems at least some of the fuser is working, so you may have roller wear issues. Maybe, if that helps, reserve that "good" fuser for just the special jobs to reduce how much wear it gets. Also --- how many pages do you do at once? Try just one page at a time -- this possibly allows the fuser to have the best peak heat for that one page. Printing on metallic paper is tricky for most laser printers -- before fusing, the toner is applied using high voltage static charges. Obviously, any media which is partially conductive can disrupt that.
That was my thought as well; I've run greeting cards on the office photocopier which is essentially an 11x17 laser + fax + scanner in a refrigerator-sized carcass and with default settings had similar results to Adam until I played with the paper type and set it to a significantly higher weight card stock and then everything was beautiful 98% of the time
could it be the the corona wire, need a good clean all the dust blowing around Adams shop, if it accessible most printer used to come a little felt pad to run up and down it,
@@dh2032 No. Ugh. Really? If it was the corona wire then all prints would show the defect. Never mind that a corona wire is continuous and either functions or fails. When if functions, the wire may be contaminated but this will lead to excess toner (streaks) in the same place on all prints. Do you actually KNOW anything about laser printers? Did you mean charging corona or transfer corona? Doesn't matter... these are NOT SYMPTOMS of a dirty corona wire. UGH
I worked in a print shop for years and used several 11x17 color laser printers. My advice would be to skip the search engines and go directly to the manufacturers' websites. Xerox, Canon, Konica Minolta, HP. I found quite a few that may meet your needs. I didn't do an in-depth comparison, but a lot of them have spec sheets available, and I bet they would gladly answer questions from you.
This exactly. Large format color laser printers aren't really a consumer level product. So you're just going to find 100 different ones. IMO, once you hit a certain level of a product, people just KNOW which manufacturers make the best stuff. You don't just google for it.
Sometimes altering your search terms can have drastic changes on the results. Techs doing repairs always use the shorthand to seach for things. So when I search in shorthand ai often get different results. Aka if I search for "waste toner full error" I will get adds, sales pages for waste toner boxes and manual pages on how to remove one. But if I search "WTB full sensor fault codes" I might get the error codes list and it will highlight the fault and show me possible repair points, bulletins and other info. Might get a picture showing howbto remove the sensor window, how to clean and replace it to get or working again etc. If Google thinks your looking to buy it will try to sell you things, if it thinks your looking for a fault code say it will do different things. Also the same searches on different devices can yield different results.
You need to choose Thick 2 or Thick 3 as the paper type. It's not only good for heavy paper but it's also to slow down the fuser part of the printer to better set the toner into the paper. The fuser drum could also need replacing
I do this for my Xereox Phaser when I started having these problems with 3rd party toner. If there isn't a thickness setting use Cardstock paper type. Another thing I do is run off 20 or so blank sheets before printing. This gives the fuser time to warm up sufficiently.
Former Xerox third-tier laser printer support tech here. This is the right answer. Depending on the printer, the setting may vary, but there should be one that will slow down the paper feed and/or increase the user temperature. It might be "Label," it might be a thick paper setting, it might even be a specific toner heat setting buried deep in the printer dialog's advanced settings. It might even be in the printer's own menus. Also, make sure you set up the straight paper path so the paper isn't getting curled inside the printer when you're doing those labels. On most laser printers, this means using the "multipurpose tray" (or single-sheet slot), and opening a door on the back of the printer. If all else fails, try calling the printer company and politely asking for an escalation; it's likely that there's a service-mode menu that could be used to increase the heat-but that also increases the chance of a fire, so it may take some convincing to get that info. (Fun fact: the first Xerox copiers had a tendency to start fires when paper would jam in the fuser. As a result, they included fire extinguishers behind the front door. But since it would be.a marketing disaster to say your copier needs a fire extinguisher because it could catch on fire, the device was called a "scorch eliminator.")
Oh my god, I'm so goddamn happy that Adam shares MY EXACT FRUSTRATION with Google Search! Because, despite my numerous scathing feedback I've sent them, I'm still a nobody at the end of the day... But Adam is a well respected, *huge* somebody, and I sure hope that this issue gains traction as a result!! Thank you, thank you, _thank you!_ I feel so vindicated now. 😊❤️
@@Rosa-lv8yw My Google-fu was strong back in the early 2000s, since the algorithm was the crude style where you had to be precise and succinct, it made it difficult for some to nail down terms to find what they needed. Basically, had to think of the sentence/question, then remove 90% of the words lol Today, as you've highlighted, doing that won't _quite_ garner what you're after, so now you have to append additional terms just to hone in on where Google should even LOOK on the net. But even then, it'll hand-hold by substitution of words, which often times such a small shift can *drastically* change the context of your search... thereby exacerbating the problem by returning incredibly irrelevant results...... requiring even *_more_* refinement terms... 😫😤 And it seems that using quotes around words doesn't quite work how it's claimed to, being it should treat those terms as "verbatim", no substitution, find that exact term. Yet, frequently I've had it STILL swap them out! 😔🤦♂️ To conclude this rant... lol I noticed this regression of RUclips around 2010, but it's *definitely* gotten much worse the last 4-5 years, which might be what you've started noticing.
@@DUKE_of_RAMBLEYeah, 2010 sounds about right, for google search. YT search on the other hand, has always been trash, as I recall. At that time, during my computer science education, SEO (Search Engine Optimisation) started to become a major part of making websites, to the point of having its own courses. Rather expensive Software started to come about, that automated SEO for existing or building websites. I clearly remember how I had discussions with teachers and peers, about how I thought, that this trend could and would be used for malice. Basically making search engines worse (in worst case useless), if Google and others didn't put in an effort to combat it. What I see now, is pretty much what I feared back then. I definitely share Adams frustration, at least on a weekly basis, and some times several times a day.
It's so freaking infuriating, how can it be possible the that all search engines are getting worse? 2 years later, it's not better, it's worse. It has to be on purpose, if you click on a bunch of things before you find what you want - they get more money. Taken to the extreme, you just keep clicking, searching, and keep failing, you end up searching forever, hopefully given the whole free market thing, someone replaces them on the top spot, then they are forcded to change their ways, but will that hapen? I don't think marketers making the decision on what algorythms produce the most dollars get that they're not even being capitalist, once you minipulate the market you're outside of capitalism.
@@smizmar8 Honestly, I've concluded that it's their creation of Search Engine Optimizations (aka SEO) that has ruined everything. Because now you're relying on the website to have put in the legitimate keyword(s) that match what content is on that page... So what I'm figuring is that now everyone is basically cheating, gaming the system, in order to get THEIR result at the top, regardless of its *_actual_* relevance. But yea, also because the algorithm likely broken as well. Here's an example that I suspect applies, since Google owns RUclips and I figure the YT search uses much of the same code: I like to watch certain videos in Incognito Mode, so that watching it doesn't make Google think I'm interested, thereby tainting my Recommendations. To do this... First, I copy the link to the video _(via Share, as I'm using the YT app)._ Next, I go into Incognito. Then I paste the link into search. OH, but you can't just click search like you used to, because they've appended a unique identifier to the link, to track sharing and boat a video's reach... So now I have to delete all that tracking code! Now one of 4 things happens... Either: 1) it returns the exact video in question _(85% success rate)_ 2) it fails, either by returning nothing OR by returning some random video, and so I have to delete all of the address code, leaving just the unique video ID _(happens 10% of the time)_ 3) it finally returns the correct result 4) or it *_again_* fails, and I have to dick around further and get the video title, then search that way... 😮💨 I've determined that this happens because of underscores in the link, which the YT search engine seems to be ignoring, thereby producing said random results. 🙄 Anyways, yea, things are just getting worse, as you've said. They probably won't get better, either. And it's not like another search engine can turn up, because Google reigns supreme. 😞 [/pre-coffee rant]
Still in the same boat. Here I am searching for a decent printer, and I have NO idea what the heck to buy, because online search is next to useless now.
As a prior MFP/copier technician: Check if the print driver has an option for thicker paper, this will increase the heat and thus toner adhesion, the thicker the paper setting, the more heat (Card stock = super heat). Large copiers have this. Yes, the bulk of large formats are ink, the print head has to move such as large distance and I see that as being an issue to have have the components to apply heat and thus that increases cost and thus lowers market share. Also yes, search engine results have been horrible imo the last year, maybe ask HP etc dealership and or sales and get their salesman after you. Edit: Side note, ask all your contacts whom have used card stock tips on the printer brand and thus driver settings needed for heat. Copier dealerships, print shops etc may answer this for free out of kindness if you are polite. Ensure you use the newest print driver from the manufacturers website, PC has way more robust drivers and thus settings in my experience than MAC.
"Large Format" in the context of printers usually refers to a plotter. Without getting into a very expensive printer, you're probably not going to find a reasonably priced laser color plotter. if you are looking for something that can print on 11x17 aka tabloid paper, I'd recommend searching for "tabloid color laser printer" or "11x17 color laser printer". For your current printer, based on the small section that is getting ripped off down the paper, you may have a bad fuser. A quick check is while it's cold, remove the fuser and look at the orange(ish) roller in it and see if you can see any damage to it. If it's not the same color/texture all the way across, it is damaged and needs to be replaced. If it is good, changing the media in the print settings for the program you are using will adjust the temperature for the particular type of media which might help with the damage to the outputted print job.
Yeah I was thinking the same thing about finding a printer that does what he wants at a reasonable cost. My last company paid like 20k for a Konica Minolta color laser and even then, it didn't have every feature they offer. Business grade hardware is kind of another level and is built to print in large volumes, which Adam probably does not need.
I think this may be the case here, we have some large format printers at work and they are all for doing poster size prints, and they are all ink jets. Most small office copy machines can do 11x17, and most of them now are also network printers.
Came here to make this comment. Any “large format” printer I have worked with has been a plotter. Adam has mentioned in the past knowing what to Google (your goofoo) makes all the difference.
I've been a CAD for 10+ years & worked for various Arch, Civ & Mech companies . All of them had the same opinion plotters. They're a major pain! (1) The machines are expensive. (2) The Ink & Paper Rolls are expensive (compared to the already pricey 11x17 printers) & typically require a special ordering. (3) They frequently need to be serviced by a specialist/technician in order to stay under warranty. (4) They're only ever used when required by the installer/fabricator or when trying to impress a customer/potential client. (5) Many places ended up outsourcing plot jobs to avoid the hassle.
I share your frustration, Adam. Two years ago, at the start of COVID, I tried to buy an 11x17 color scanner to work at home. I bought the one recommended by Amazon only to find out on delivery it was an 8.5x11 unit that was misrepresented similar to what you described. I sent it back and got $350 credit then bought a surplus new DS-60000 for $2,000 that works fantastically.
its happening more and more with all search engines where you are incapable of searching for "specialized equipment" its infuriating. really does fell like search engines are past searching and just serve up the closest matching ad with highest revenue. even when you include strings to purposefully ignore website, force emphasis on words and so on, at some point the engine literally gives up and says i can't find what im looking for.
It seems like RUclips is similar. It'll offer me a handful of relevant videos and topics based on my search, but then regresses to other curated content unrelated to my search! I know Google just wants me to keeeep waaaaatching ads... Haha
Yeah, this is not the future i imagined, i really dislike it when devices start thinking for me, because they're almost always wrong, and when they're right, it's mostly because i made a typo in the search, something i would've found out at some point by myself. I recently stumbled into a Google brainfart, when i Googled the difference between my native Dutch definitions of certain numbers, compared to English. For example: 1 million = 1 miljoen 1 billion = 1 miljard 1 trillion = 1 biljoen 1 quadrillion = 1 triljoen So as you can see, our "billion" is actually your "trillion", but Google had a really hard time understanding that. It kept reverting back to "Detected language: Afrikaans", which is very similar to Dutch, but obviously, there are some differences, namely the one i was specifically demonstrating. And whenever i manually switched language back to "Dutch", they still translated the Dutch "triljoen" and the English "trillion", even though it is supposed to be "quadrillion". It did work sometimes, but if i then refreshed the page, it got back to Afrikaans, it just couldn't stay on point. I guess it kept assuming that i was looking for "trillion" and not "quadrillion", which i wasn't, i was mainly teaching Google the difference. So i started poking fun at Google and extend my translation searches to "Dutch triljoen translate to English. Google, don't say trillion!!!!" Then again, i might've distorted the search by throwing in the word "trillion", but that was only after i already tried to use Google translate in the normal way a dozen times.
@@bryanflo4500 Yeah, I hate the way YT slips unrelated curated / trending content into the search results. I wouldn't mind so much if they just had a section somewhere on the results page for it, but stop acting like it's an actual search result.
@@Feroce A big part of the problem is that Internet is actively lying to you because it's profitable to do so. So the search engine needs to be the arbiter of truth which is a very tricky business to be in.
The term “large format” usually refers to machines that use roll feed media and print way bigger than your 11x17” (A3 to those in metric land) which is actually a pretty standard format. Canon and FujiXerox are my 2 favorite brands when it comes to pro colour level laser printers. They are generally about the size of a bar fridge for the basic printing unit and you can generally lease them for a pretty good rate if you don’t want to buy
I feel like Adam would benefit from a large format plotter printer that can do poster and banner sized prints, especially on projects where he's had to make multiple printouts as reference and cut/paste them together.
5:00 The same thing happens when makers are searching for raw materials or specialty products like vinyl paint, raw pigments, large format scanners etc. I'm surprised that this if your first time encountering product search manipulation. I'm not sure who manages and promotes these "best of" product lists, but it's very very annoying.
Just anything outside of the obvious answer, basically. You can use google to find forums and other sources (like wikipedia, sometimes) that discusses places and ways to actually find wat you're looking for.
Searching for just about anything. Looking for software, how to do something, just about anything now fills with these top 10 [item] of [current year] pages filled with affiliate links. Internet search has become a whole lot less useful in the past several years. Search for something that was findable a few years ago, and you are unlikely to find it, though it does still exist. Ask in a forum and you are likely to get a response with a "how to search" link that goes to the same useless hits, from someone who knows the answer, but hasn't tried actually searching recently.
@@krsbog that's so true. If I'm asking in a forum, it's because I've tried googling it but got nothing but useless info which is all carbon copied from each other. I want a human being who has successfully performed my same task to help me in the right direction.
In my decades of repairing laser printers, the error you showed at the start is caused most frequently by the fuser (the hot roller) losing the teflon coating causing the previously deposited toner to be attracted to the fuser and redeposited down the page. Some times the problem is started by the developer roller Usually in the toner cartridge, becoming worn and smearing excess toner onto the page. When this happens, remove the cartridge and examine the usually green roller in the cartridge for wear or excess toner build up. If you can see the actual heat drum in the the fusing assembly examine it for wear and excess toner. Never use refurb cartridges if you want to reduce the likely hood of these problems. Note don't touch the fuser roller, it's hot enough to burn you with ease. Furthermore, I have seen refurb cartridges do this to the point of taking out the fuser as well. It's not usually a heat problem, the fuser is hot and there are temperature sensors to sense any low heat problem. Some laser printers actually have menu settings that can alter the heat setting as well, but I would not assume that to be the problem.
I love reading the comments on these , there are so many highly intelligent people answering , and posting useful information . Most other pages , by the time you got to 100 comments , it would read like the Jerry Springer show , fans here , give me hope 👍
Yeah he should check the Teflon coating on the fuser, but if it was the teflon then the image defect would be the same down the entire length of the page, mostly. The defect only started about half way down. Given that repetitive defects on most fusers repeat at an interval of 2-4 inches (depending on the size of the fuser drum) this doesnt look like a fuser teflon issue to me . This looks more like the fuser isn't get hot enough, like its loosing steam about halfway through the print. I know, difference of opinion. It's just my two cents, from all the years that I have worked on laser printers. I do think it's odd that it's happening just in the one clearly defined strip in the middle, but my gut still tells me that it's the fuser not heating up. Id love to be there and run a few other tests to see. Even a config page on normal paper would tell us if it's the teflon coating or not.
@@victoriadell614 And if I could add to that common. HP uses low temperature toner on all of their modern printers. Lower temperature, lower power consumption. Lower temperature printer, lower temperature fuser. A media that works with lower temp toner would help.
When I print on thicker stock or anything super smooth, I need to change the paper type in the print settings. Choosing thick cardstock, envelope, or similar will slow the paper feed speed to give the fuser a better shot of setting the toner. I have an ancient 11x17 laser printer to print my music scores, but it is monochrome. It fits my needs as a composer but I've not found a comparable color option. Adam, I love everything you do and appreciate you sharing your talent and humanity with us. Thank you for remotely enriching our lives -- I wish I had more people like you in life.
This 100%. I'm using a HP MFP M277dw for everything my family needs. I just did water decals on glossy paper for a project my daughter was doing and just selected "HP Glossy 120" paper instead of plain. I've done transfer decals for other projects the same way.
I agree with the rant on search engines (and I am an IT professional). Well, I tried switching to "laser printer large format". It helped a little, but the problem was still there. And you can change to +laser, but then you can still get the reviews that have one laser printer and 9 inkjets. The rant is appropriate.
The plus operator has not worked on Google for around 10 years. They eliminated it so it wouldn't interfere with searches relating to their Google+ service, and when Google+ failed they never brought back the operator. You're supposed to use quotes around every word you want it to not ignore. This takes twice as long to type, and it's moot because it often decides to ignore your terms anyway.
Try using "industrial" finding a business to business supplier that maybe doesn't have exactly what you're looking for and then use their keywords, I think the professional printing industry may not use "laser" for the type of printer he's looking for
Searching for "laser" won't really help. Those "top 10" sites, all of them, are just affiliate link machines. They'll throw the kitchen sink onto the page with a list of keywords so that they'll still show up in more specific search results. They don't care that the page doesn't have what you're looking for. They hope you'll click the affiliate link and then hope you either buy it, or continue shopping at that merchant and buy something else, either way they get the commission.
You've hit the nail on the head of the incomprehensible headache that is computing since maybe 2010. When system's sole purpose is making money rather than performing services!! As someone that works in RF I giggled at the SNR > 1 comment xD
If you're typically printing solid colors, picking up a used Gerber Edge printer and plotter set up might be up your alley. It's designed specifically for printing on vinyl, and it's thermal foil printer, not an inkjet. Then you can print and cut your decals.
Thank you, Adam. This happens more often than it should. I work in product engineering looking for novel and oddball things on a regular basis. I often hit this same problem where I get stuff that people want to sell versus things I want to buy.
This is a tip not just for Adam, but everyone else also, if you do find your self in still the mood to invest in printing hardware, dont forget to check (especially more so for Adam, given proximity in the middle of SF) for "office bankruptcy/liquidation sale/auction" postings. For the most part, a used printer is still fine, and any of the "used" parts would be the consumable bits that would need replacing anyway. You can get heavy duty workhorse printers from offices for fractions of list price in liquidation sales.
I bought my first color laser printer that way (on eBay), no one else bid on it so I got it at the very low starting price; the price was so low that when I went to pick it up (local sale), the guy was really pissed that he got so little for it, and refused to include the fuser for it, saying he wasn't going to just give it to me, I'd have have to buy it from him! (It didn't say that in the eBay listing!). I told him to f**k off, and I ordered a fuser online elsewhere, told him he could eat that fuser for dinner.
35 year photocopier/printer tech here. Just looking at your sample, I see a fixing problem. One of the largest challenges I have professionally is when users want to print on media other than 20lb bond paper that is the industry standard. You are applying plastic powder to a media and must heat it and press it at a specific engineered melting point to "fix" the toner to the media. Color technology is even more difficult as you are mixing 4 layers of different base color toner. The temperature for fixing has to be even tighter than in the black and white xerographic process. The "media type" label in the print drive is more than just for choosing the correct feed source. It will also define the weight of the paper, and set the fixing temperature and the speed the paper moves through the fixing unit so it can melt the toner properly. Just like you use a higher temperature and slower motion ironing denim pants than you would a cotton t-shirt. If you have the box for your print media, look at it for the weight rating often in small print. Measurement is typically grams per square meter these days, or g/m2. Some printers can custom set the weight for each paper type, but that is only a starting point reference. Trial and error is the normal way to figure out the correct setting. Add to that the fixing unit is a high-mortality item in color printers and will give more issues as they wear out.
I feel your pain Adam! I get so frustrated with search algorithms. It seems to me that the true metric is how much companies are willing to pay to have their products thrust upon you. Instead of showing results of the actual thing you are looking for you just get the highest bidder....
I think the issue may be from the wording "large format" combined with "laser printer". A large format printer, which is also known as a "plotter" is not a laser printer. Plotter are usually roughly 4' wide and can print massive banners or poster or what have you. That being said, I think HP makes pretty solid standard laser printers where that problem can be easily resolved by replacing the fuser kit, which HP makes pretty easy to do (not much harder than changing out the toner).
the search algo thing is everywhere. You absolutely cannot google ANYTHING anymore like an answer to a question or search for a very very specific item without promoted and sponsored AI generated dogshite being pushed up and clogging up the first, second pages of search results. Like we see here, you search for laser printers and they'll either try to sell you inkjets because they wanna get rid of cheap crap in stock, or the other half of the results is useless trite like "what is a laser printer?" and ads for the local best-buy.
I solved that problem long ago, in the days of dead tree publications. I had a friend who spent most of his time scanning ads in the paper. On the other hand, I didn't see them at all. It's still the case that I generally am unaware of whether an ad that I didn't manage to block is particularly relevant to my interests, which are also quite broad, so cats and Cats, you know? Of course, Amazon and eBay do this to me, but there I don't particularly mind it.
It is because Google changed their default algorithm but you can still use the old one by searching something then go to search tools then changing all results to verbatim
No expert here but my wife had a very specific use case, she needed to be able to print on 110lb paper on a laser printer. So we went down the rabbit hole of consumer vs pro and stumbled across the xerox workcentre 7556. It had everything we needed, ultimately you need a pass thru or straight paper path to be able to handle the higher poundage paper. Worked like a charm and we got it for $900 usd used. You can order it refurbed online for $1500. Couldn’t recommend it enough. Feel free to reply if you have any questions.
THANK YOU!!! I went through exactly the same experience buying a laser printer and thought i was loosing my mind!. Even looking for toner cartridges is a challenge. Also,I have used my printer to print on adhesive labels and have had good luck setting the printer to really thick paper, or "cardstock" setting. It seems to print really hot and the graphics and text adheres really well!
This is exceedingly common in any highly-specific search. A few months ago I was in the market for my first dirt bike and I was looking into whether a tall and heavy guy like me could get away with starting on a 450cc bike, which are the largest common bikes you'll find and generally strongly recommended against since they're so much more powerful. I was greeted with dozens of these kinds of generic websites with "Top 10 Dirt Bikes For Beginners", and listing all of the current year's models, including the smaller ones that I had explicitly NOT searched for, with some vague bullet points about why they're good bikes that seemed to be lifted straight from the marketing brochures. Same deal with camera hardware. Same deal with graphics cards. Same deal with guitars. The only reliable sources for relevant discussion about anything anymore are dedicated forum sites for the thing you're looking for and Reddit.
Yeah, I’ve noticed awhile ago that searching for something specific is basically useless. It’s like you’re being punished for knowing enough about the subject to narrow down your search.
Researching historical gliders over here. I can relate in full to what you say. What Jay said ins true as well. The amount of digital manure you have to sift through is surreal.
One black mark on my resume as a "creator" in the software dev industry, is that I've created tools that procedurally generate webshops with intensely over-the-top SEO. Some companies use them for marketing. In fact, I just googled "large format laser printers" and found three websites in the top 30 results that have my "signature" on them. Only one of them actually displays a laser printer that fits the description. This was something I created years ago before I knew what it entailed, and while I had to scrounge for money.
I worked as an engineer on an SEO team, and it broke my heart to see all of the desperate shops out there procedurally generating webspam for cash. I tend to add the word “reddit” onto the end of my Google Search queries fairly often.
@@stephentroyer3831 would that be considered competing tho? They Could have signed a non compete before leaving. Yes theirs been many cases of it being overturned. Butttt that is still a possible legal battle
Thank you for this healthy rant. I do so agree. Watching this video was worth it for me, just to acknowledge your personal experience with actual needs when using a search engine. Best of luck with your future Laser Printer!
Xerox WorkCentre 6515 bar none. I left inkjet printing and never looked back. This printer literally made me low printers again. It just works every time. Has a great color. And has a five year warranty where Xerox actually will come to your house and fix your freaking printer.
I feel your pain. When I was a rookie truck driver, I was having trouble figuring out how to loosen a load bar (I've never seen one of these, despite several years experience loading and unloading a truck). I Googled, "how to use a load bar," but could only find websites and videos on how to thghten one. (I already knew how to do this, as it was all I could seem to do.) I then Googled, "how to loosen a load bar," but could only find videos on how to tighten one. It was so frustrating!
I was looking for videos on how to disassemble a vacuum cleaner hose (the handle) and could not find on to match my model. I ended up having to figure it out on my own, and gluing a bunch of tabs because I did not have a guide to tell me whare they were!
Here's a tip: if you include the word you absolutely require in your search term in double quotes (how to "loosen" "load bar"), Google will require those words to be non-negotiable in the search results and you're more likely to find what you're looking for. You can also add a minus/dash in front of words you DON'T want to exclude them (how to "loosen" "load bar" -tighten), though you run the risk of excluding results that may talk about both loosening and tightening.
@@notoriousresearcher "Google will require those words to be non-negotiable in the search results a" If only that were true. Its SUPPOSED to work that way but I often get a lot of results, near the top of the search that are not adds, that even mark it as not being there.
Adam, you have to slow the printer down so the toner gets hot enough to adhere to the glossy surface. Many laser printers have heavy weight paper or gloss paper settings that will cure that problem.
Owner of a professional print shop for over 10 years.we run eco-sol printers (mostly Roland) and i think it's what you would want for your needs or perhaps a layex printer. Roland makes some smaller hobby style for not a lot of money.Yes they are higher maintenance and not a "hit print and go" solution. But would be durable and over a lot of options. We Would happily print and digital die cut whatever custom stickers/decals you would ever need. Cover the shipping and they are yours!
I came here to say exactly this. Eco solvent print and cut printers allow you to do real vinyl stickers, paper prints, metallics. We've fed all sorts of materials through ours. Worth the investment.
I have a couple of Brother laser printers. They have settings for the paper type and setting it to the thicker types will slow down the print speed so the page spends more time under the fuser. They also have an "improve toner fixing" option that can help when printing on some heavier types of paper. You don't want one with an excessively hot fuser as that would be a fire hazard if there was a paper jam in it.
So a couple things that can help with the "noise". You can put double quotes around a search term to have google require that term in the results instead of trying to guess what you really want. You can also put a minus sign in front of a term to have google exclude results with that term. So you could search "large format" "laser" printer -" best" and get a lot less noise. If you click the settings icon at the upper right of the google page, there's also an Advanced Search option, which will help you narrow your search results.
I work in the industry, take a look at xerox versalink printers. They're low to mid end, took over the phaser line. You can absolutely change the fuser temp to whatever you want, I'm just not sure how much information is public.
After years of watching machining and maker videos there’s finally a question I can help answer! My dad has been been selling and repairing printers, fax machines, and typewriters for 30+ years and once upon a time I used to help around his shop so I have some insight to this question. Now I don’t know as much about large format printers so this advice might change based on that. But first off I would say you should actually look for a reconditioned professional machine. A properly re-built/taken care of professional machine will have the build quality and longevity of 10 consumer ones. At this point consumer printers are ewaste garbage that are meant to be replaced whenever they have one thing go wrong. Age also is less of a problem as long as you can still source toner/parts and even older laser prints will have enough quality for what you want. As for specific printers I would focus less on a model and more of a brand. Avoid HP at all cost because they are cheap and garbage. Xerox are better but too proprietary. Personally I’d recommend a Kyocera, they’re not really known in consumer markets but they’re quiet workhorses. Brother would be my second choice, the consumer stuff isn’t as great but the professional things are solid and more common. In terms of finding a machine you should look around for either a local dealer or an office liquidation company. Either are likely to have professional stuff you could buy. I’m not sure if any of this info is helpful but I hope some of it is!
Two minor addendum‘s to this. HP’s professional stuff is better than consumer stuff, but I still don’t love it. And I kept my recommendations to laser printers, but based on what you use a printer for I would also consider a sublimation dye printer. They often come in larger formats and are what are used for printing on canvas and other materials. They have their own quirks, but it might be better for your use case.
As a few people here have commented, you can get off-lease Xerox or Konica Minolta floor standing copy machines for very good prices. They will include 11x17, 12x18 or even 13x19 printing, 11x17 scanning, and fast multi-page scanning, which can be SUPER handy. Try pricing out a standalone 11x17 scanner! These printers also have very good toner pricing One thing I haven't seen (although I didn't review all 2k+ comments is that the print driver should have different kinds of media settings. Properly setting the LABELS option or similar will give you more heat, as will settings for thick media. That clearance is actually very important, and if too low or too high for the material, it can mess things up.
fudge I literally fell into this trap last week and had to cycle through a million awful printer options while looking for laser printers for my office.
loved using xerox when I worked at a print shop. would agree with previous comments that changing paper type to slow it down can help, have used plenty of non standard paper stock and you just have to play with settings till it prints correctly. also could be dirty fuser or drum from all that toner that isn't sticking to the paper.
Yeah, I loved using their DocuTech machines! We used to *joke* it would print on sheet metal. I sure did a "Buckwheat" (Little Rascals reference. If you don't get it, you're too young.) when we were able to run index tabs (for separating sections in a catalog or manual with plastic tabs) without any adjustments whatsoever. It was truly astounding when you're used to any nonstandard paper jamming frequently.
One of the resons I actually find linux easier these days is that there is a lot less AI generated content on the web compared to the endless listicles telling you to try running chkdsk for every issue under the sun...
@@TheToric that may be true for the more obscure linux things ... but as a newbie I've already run into similar listicles and youtube videos for Linux problems. The need to be found outweighs the need to provide to actual provide useful info. If it wasn't for Stackoverflow then I'd have similar problems when looking for answers to progamming problems.
Check the supply status from the information page of the printer, you might find that the Fuser in the laser printer is due for a replacement with a fuser maintenance kit. I run laser printers in a cold warehouse without any printing issues.
What I have found is when you want something more Niche/robust/specific/etc. Is I find a company that makes the product and search on THEIR website. In this case, it looks like you want something that essentially Commercial Business grade. Which is a small market, so finding the top companies and searching there is the way to go. Not saying anything you said here is wrong, you are totally right and have an amazing point, just pointing out what I have found works to find the specific tools I need.
I love this format of video. Adam just telling it how it is and very much relating to the average maker in terms of the frustration that comes with trying to even find a part or tool. A quote comes to mind from Futurama where Fry says “shut up and take my money!” more and more I’m brought to the conclusion that anytime I’m trying to buy something I need or want there making it more and more difficult to do so! I’m only 20 years old aswell! Even if you know how to work the tech you need to buy something it’s a hassle!
You probably want a dye sublimation printer. You can print in UV- and water-resistant dye, then heat transfer the image onto almost any material. It's a total gamechanger in the shop. I'd suggest a Sawgrass SG1000, but any signmaking or garment printing shop should be able to give you a recommendation.
Hi Adam, as others have said, part of the issue is including the "Wide Format" as a search term. While we know you are trying to find something that will print ledger sized documents, Google and Amazon think you're looking for a plotter or banner printer, which are almost exclusively inkjet. This confuses the algorithms and produces more crap results than usual. I would try being more specific in your search terms and specifying the general model for the manufacturer you want to spec out. For example, a search for "Laserjet" should generate almost exclusively HP laser printers, while searching for "imageCLASS" should generate almost exclusively Canon laser printers. Adding "11x17" to the search should filter it down to printers capable of handling ledger sized paper.
Yeah, I often find my Google searches to be ads first and then garbage after that. Especially when searching for products. Usually asking a question works somewhat better.
Adam when it comes to printing in 11x17 you are more likely to come across inkjet printers just because the use-case for prints in that size leans more towards graphics and images. Having said that I think the HP Color Laserjet Enterprise M750n is EXACTLY what you need. I normally recommend Brother for laser printers but in this particular case HP has built an absolutely fantastic printer and I believe you will be more than satisfied with its capability.
Adam, been in IT for thirty years and have torn down various printers to the screws. I’m sure you have likely already tried changing settings to heavy or thick card-stock. Those types of settings are a given. Your problem is contributed to heat, uneven heat in particular. The striping you are getting is due to the toner not adhering to the paper, more likely due to damage the toner drum than the fuser applying the heat to print. Cheap or off brand toner cartridges typically cause this issue. All that said, my personal favorite for a laser printer is an HP. A LF color printer 11x17 will be expensive but would be worth it as there life cycles can be 150,000 or higher. Xerox is my second choice and either again will have what you need for a price. I will provide a recommendation in another comment as this one is getting long in the tooth. :)
Ok so first off, “large format printer” means something different to what you think. Large format generally means around A2 or larger paper. At those sizes most printers are plotters which are ink based. If you’re talking 11x17 you should search for A3 laser printer. But even then you don’t really need to search. There’s only half a dozen brands so you’re better off just checking the specs for each of those brands: HP Konica Minolta* Brother Kyocera Fuji/Xerox (personally I hate these printers due to driver issues) Ricoh* Canon* *these guys are kind of the top 3 in office laser photocopiers / professional laser printers and they all make desktop units so I’d start with them.
Something useful in this context is adding +"laser". This tells the engine that you're only interested in the word laser and will prioritise those results. You still get crap but it's less crap when you tell Google that the word laser is more important.
The pages that Adam was talking about still have the word laser in them somewhere even if none of the printers are actually laser printers. This is a great tip that normally works but unfortunately not in this case. :(
That can help but also tacking on -inkjet and/or -ink jet. I've had times where searching for more obscure things required filtering out the noise lest I need to look through pages of unrelated content.
@@paulmarchesi7020 Even if that "somewhere" is hidden text just for SEO. Slam enough keywords in every combination into every corner of your site, link and link-back (even farmed), farm clickthroughs and rake in the hits.
Makes me long for the days of AltaVista. It had some pretty good advanced search mechanics that I haven't seen the equivalent of in a online search engine since. Sure AltaVista was far from perfect but it was pretty powerful. To be honest though I haven't really made a habit of testing new search engines. It's the curse of "good enough", and Google have managed to fill that niche so far. So how many real search engines are there anyway? With real I mean that they have their own database and spiders scraping the net for data and are not piggy backing on search engines like Google, Bing and whoever else.
Fortunately I don’t need a laser printer for my needs. You have my sympathies (not that they will be of any help, of course). I am so sick of the borderline fraudulent behaviour of laser printer manufacturers, with toners that ”run out” long before they are actually empty. My refillable ink printer needs to be used once a week (I’ve scheduled it), but has worked like a charm for years. The paper costs more than the ink. I love it. I do indeed sometimes need to protect the print when weathering. I use airbrush matte varnish for that, but that might not work if I needed to do it very frequently.
Have you tried going directly to Canon, HP or Ricoh, etc to see what they might list on their sights? Maybe they have a different way of naming this printer and it will help your search?
Printer tech here as well, but a second hand printer like a xerox 7535 should be about $600 I got mine for $400. Adam your smart enough to repair it as all of the service manuals and nvm values are online. Great project that has great results.
While it does not always work, adding quotations around the vital parts of your search frequently helps me a great deal when I'm getting a lot of noise. In this case it might be: Large format "laser" printer, or the like. For printers specifically, I have prior knowledge that HP and Brother are two of the main producers of sub-professional laser printers, so I started there when looking for a color laser of my own. If you're going pro/commercial-grade, Konica-Minolta is widespread, but I will warn that they have very specific incompatibilities with anything Windows 8 and newer, and they are aware of them but are uninterested in resolving them.
Watching this while I’m at my printing job in London. Try to find a wax toner laser printer. They are more efficient and robust. Its just a regular laser printer which has wax mixed into the toner.
I used to have this very issue with the old Minolta I had - the solution was actually stupidly simple ... in the settings option I changed the paper type to the thickest, heaviest card stock available in the options - what this did was print everything as it normally would, but at 25% feed speed ... yes the print speed was awful but I never had a fusing issue on anything weird with that setting (paper naturally I printed normal speed) so, check settings maybe? I believe Brothers work the same way - just tell it you're running heavy cardstock and watch it slow!
In your printer driver, pick the thickest paper possible. That will get the drum as hot as it can go. Also check advanced options and see if there is an “improve toner fixing” option or any option to heat up the drum as hot as possible.
you usually have settings in the print driver (printing preferences on windows) or on the machine to match the stock you are printing on that will get the toner hot enough to stick to the page you are printing on, most printers are capable of doing that. konica and ricoh are favorite printers. if you are doing any business type of printing you might as well just get a full size copier (cheaper to run in the long run and easier to fix) or you can lease. you can get one that's a little smaller also but konica and ricoh also make consumer size machines as well that are much more well made than your typical hp, canon and epson printers...
Adam, your rant is becoming my rant. This last week I tried to do a web search for either a video c-stand or a stationary gimble to mount a projector for my home computer. All I got was crap, and crap, and more crap. I am also nearly dealing with the same problem for the projector itself. I finally turned to a local camera store to ask about such technology. Yep, they have it; Nope its not in stock. But I found a pathway towards what I want.
Beyond any incapability of the printer, if there is any damage or anything on the fuser rollers or image drum, you will get image defects. Often image drums are built into the toner cartridges and some places will reuse old cartridges and just refill them, which is of no use when the built-in image drum is damaged or worn out. Another thing to lookout for with the sticker media is to make sure it is designed for laser jet instead of ink or thermal printer as they can affect the quality of the print or can gum up the laser jet.
Pigmented Inkjet Printers like the Epson R3000 (an older model) doesn’t run, fade, or does not bleed when water is applied. As an artist, this is brilliant printer for my needs, and possibly yours too!
I had this same issue recently. I've been looking for bone conduction headphones for the shop so I can still hear everything happening around me and I can hear my coworkers trying to talk to me but the Google results are just auto generated lists of the top 10 and it's infuriating to me
I have a Canon ImageClass color laser printer that works really well. I use it to make labels and multiple types of transfer papers. Both the paper and vinyl type of adhesive backed papers haven't had any issues. Also have used it on transparencies for making cyanotype print negatives without issues. The drawback would be you can only get them up to legal size paper. I haven't really found any laser printers that go up to 11x17. Mostly that size is used in photo printing and they pretty exclusively use ink-jet style printers with special photo papers for the most photo-like results.
If you don't mind a bit of tuning and maintenance, by far the most flexible option is the ancient giant, HP Color LaserJet 5/5M. Its a heavy beast, but it is A3 (IIRC) and has toner tanks you fill up from a bottle. It does 1200dpi but not as nice as a modern printer. Consumables are still available. I's suggest looking for one (or similar) in a walk-in printer repair/resale store and talking to their technician. They might be able to make the fuser a bit hotter if it isnt good enough already (no DRM or tamper protection) or suggest something else that will do exactly what you want.
I worked with HP LaserJet enterprise printers, and I can tell you that their large format laser printers are among the best. They are not cheap, but they do have specific profiles to print on a variety of materials from regular paper to acetates and other strange materials. Their fuser assembly can get hot enough to make up for this with their large formats. As far as the consumer-level laser printers, the issue is that they have to keep their energy load limited to around 1,200W due to the limits of most residential power outlets and is not really a cost cutting measure for these types of printers. Is all about safety. With that said, make sure that wherever you install your new pro laser printer, the outlet can handle 30 amps of current so the fuser can get hot enough without tripping your breakers.
@@beardedbaldingoldfartbutyo6985 Oh yeah, I think the differences are if your 16A circuit is for 240v versus 120v, you would actually use more power than a laser printer due to the higher voltage. Even so, is not the same heating up a single tiny point with a welder as opposed to a wide area over a rotating cylinder. The load is momentary just to heat up the fuser real fast though, so if you keep the power saving on the printer to a minimum it will never need to ramp up at full power when you use it.
You should use search modifiers like: "large" "laser printer" > the quotation marks will only give results with that exact string. Additionally using a modifier like a minus (-) before a string will omit those results. e.g. "large" "laser printer" -inkjet -jet
@@philopharynx7910 Yeah, and those sites seem to be like a database of search algorithms, which probably means that most people actually get what they were looking for, despite using the wrong words in their search. Which in turn screws over the people that actually have a bit of knowledge on it. Which is also how language seems to 'evolve' over time, but yeah, that's something for another time. I just tried to search for "wide laser printer" and that seemed to work, but i'm not sure if it's exactly what he needs.
Sometimes you have to target the search engine by category then sub-type. So, when you typed in "Large Format" the search engine started looking for large format anything, then it prioritized printer and then laser. I realized this as I listened to you and tried this search line, "Laser Printer large format". I got mostly laser printer results, many were larger format (bigger than 8.5x11) with a price range from $300 to $1700 dollars. Printer Laser Large Format got me even better results with more professional "Wide format" options.
As someone who works at printing company (we have from the old school platen presses all the way to state of the art laser presses), laser printers are typically sold through distributors because their primary source of income is leasing and support contracts. They will still sell them outright, they just want you to go through their sales pitch first. They also typically will let you come to their local show room with a usb stick to test print anything if it means a sale.
Printing metalized anything with a laser printer can be problematic for a number of reasons. First, toner moves inside the printer to the substrate based electrical charge differences and metallics tend to through that off. Second, yeah, metallics reflect the heat needed to fuse the toner.
I own a company and our core specialty is helping customers find the right printer for their needs. We carry every brand. More than happy to help - might even be able to get you a demo or something. Let me know if you’d like me to reach out.
do you recommend your printer? I need a COLOR home laser printer for my sons homeschool projects and my art projects. Google searches are just the ABSOLUTE WORST. I fell in love with the canon LBP612CDW I purchased for where I worked at the time. Now I can get it because they don’t make it anymore AND I can’t figure out what’s the next generation that DOES NOT have a ton of extra shit I don’t need. I just need a color laser printer with AirPrint (added bonus would be 11x17 at this point). Otherwise I’m going to have to end up with some monster machine that I can’t fit anywhere but my garage (and that would just fry the machine in the Texas heat).
I normally append "reddit" to the end of my searches if I'm looking for product reviews. I invariably get some reddit posts in whatever subreddit that is dedicated to the type of product (in this case r/printers) with some recommendations.
Yeah, this right here is probably the easiest, least time-consuming thing to do that has the biggest impact to your search results. Works great when troubleshooting computer issues as well.
I realize this is two years too late, but the Gerber Edge is a Thermal Wax printer that prints spot colors on a variety of 3m vinyls. What's really cool is the ability to print white, a slew of 3m colors in addition to mirror chromes and flourescents in a variety of colors. I used it a lot in the racing industry for modern cars, helmets, & vintage decal replication. The only thing we found to remove the color was brake cleaner (Race teams like to use it to clean the cars)). Every other solvent and clear coat never had any issues with the color. it can also print on lexans and such for instrumentation panels and such. Longevity vs UV (Except flourescent colors) is superb. I put a red decal on a gutter downspout facing south and it hadn't faded after 5 years. The con is it's way more involved than just printing on a laser printer, and it's limited to a maximum print height of 11.8". The pros are you can work with any area local sign shop that has one, and they will be able to get you what you need if you provide them with the concept and/or finished art. So you don't have to get one and learn a bunch of sign making stuff...
So like a bunch of others, my first thought would be to up the thickness and paper types in your printer driver. That tweaks how hot the fuser gets and how it feeds it through. Failing that, I've leased Konica and HP machines to my clients for years and they're both pretty solid.
Go straight to a local rep for one of the larger manufacturers. It will surely cost more but you will get exactly what you need. I used to think that the lease option was for suckers but my old office used high output laser printers and the support, supply distribution, and ability to upgrade when the new hotness came out was a game changer. It sucks to buy a machine that costs several thousand dollars and be stuck with it when you find something better in a couple years. As the saying goes: If it floats, flies, or f**ks...or prints, rent it.
As a offset press operator, nothing beats ink on paper but I get the quick one off runs for sure. I would try a print shop that has a digital offset press that can do small runs.
"The signal to noise ratio has passed one" I'm guessing this whole situation is going to get worse. I can imagine a time in the future where the first four or five or ten pages of a google search are worthless procedurally generated junk.
Look for a (used) business MFP in A3. Talk to the dealer about getting test prints. These machines cost thousands new, will need regular preventive maintenance, but are of much better build quality.
If you havent settled for one yet, the HP Color LaserJet M255dw I can recommend. Specify paper size and type in the driver and hopefully itll work well for you.
All modern generic laser printers have same issue. Have you tried to use a transfer media? I explain myself, you print mirror on a transfer paper. Then with an hand iron you transfer it to the hard surface. It works great and also the transfer adds a protection layer on the image
Adam, the internet was ruined years ago, how are you just finding this out? The trickery and garbage that search engines return now makes it impossible to find what you are looking for easy.
Lately, I've found Kagi to do a much better job than Google. It's paid, which is a bit annoying, but also the reason the results are better (being paid means no ads,and not as populat, so less targetted by marketers)
Here's you problem: "large format printer" is a product category that is entirely populated with inkjets, and generally refers to printers with a carriage width of 24+ inches. Oh yes and arsey page optimisation that is throwing every printer term at their page. Those pages are designed to capture weird searches, and they worked! Try searching for A3 or A2 "laser printers". But be warned an A2 laser will be very expensive
I actually use a Brother, in A3, at work, for running off size ”B" manufacturing prints. It works like a charm, for the most part... Though I'm not sure how much the toner cartridges go for.
When I sold a lot a printers some years ago. Brother printers had the reputation of getting hotter than most others printers. That was the reason why they were harder to get unofficial toner for it. Try look them up.
adam!!! i know im a year late. but i just learned this recently, using " " around a word in your google search. and a minus sign(-) before a word are verrryyyy useful tools. the quotes require the word to be in the search and the - omit a word in the results. so something like ( Large format "laser" printer -ink)
Most people dont realize laser printer drum units have a limited life span. Not only that, they need to be both cleaned and replaced with time and usage. Heavily used printers will need their drums replaced more often. The environment, such as dust and humidity can affect laser printers, as well. On a side note, this wasnt a rant on laser printers, but on Google search results.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
If you have a recommendation for a high quality large color laser printer, please share it!
The build he was working on when he filmed this: ruclips.net/video/5RL7EYSbc_g/видео.html
HP Color Laserjet M750dn Postscript Network Laser Printer 11x17
HP LaserJet Enterprise 700 Printer M712dn
You also need to make sure to select the correct type of paper so the fuser gets to the correct heat level
@@Hotshot6311 That's an inkjet.
Best thing to do is look at manufacture websites. Used to do purchasing for small IT company and had to use purchasing managers at HP, Canon and Kyocera. To get more information on these printers. I think it is done on purpose by companies.
Printer Technician here, it looks like the image is going onto the media OK (no drum or developer fault) however it is coming off in the fuser (hot section). In the printer driver there will be settings to change the thickness (based on media GSM) and also media type (eg labels). Changing these settings will increase the temperature in the fuser and slow down the print speed to ensure the toner is adhered to the media. Check your printer specification to see what media thickness it can handle, most will do 200 - 250gsm (80 - 90lb) and compare that to the sticker paper you are trying to print on. When looking for a new printer make this specification a must have, also check toner prices and yield to work out running costs as they vary quite considerably. Popular makes of toner (laser or LED) printers are Canon, Kyocera, Oki, Lexmark, Xerox, Toshiba, Ricoh so maybe go to their websites to do your research instead of using Google where you will probably be taken to reseller websites who wont list the full specifications. Also consider a commercial grade photocopier not just a consumer printer as the pricing might be similar and you will get a much better machine.
Not a printer tech, so the person I am replying to is more knowledgeable than I, but I used to run the printers for a large data center and they were Ricoh. They were very good printers.
Just one guy's experience.
🏆🛠 Mick knows. 🍻
Tell the printer it’s the thckest paper type.
Also look for a local reseller catering to graphic businesses. They’ll find the machine you need.
I've not been a printer tech for 15 years (ugh, I feel old) but back then we were very much of the opinion that we'd already hit the point where "photocopiers" really didn't exist anymore. Is there really a functional difference between a Xerox machine and an HP Enterprise-level machine? (Genuine question!) I seem to recall that even a Xerox was a scanner and a laser printer all in the same box, even back in 2006.
Sounds like good info.
Also check to make sure the fuser isn't warped. That can cause the paper to not make contact all the way across and you'll end up with a strip of toner that doesn't stick to the page
I started feeling my blood pressure rising during your rant about SEO. Thank you for putting my frustration into words!
same
"There is more noise than signal now" YEEEEEEEEESSS!!! THANK YOU for saying this Adam-thought it was just me wading through all this nonsense on Google to find anything now!
yes same here! My friend and I say to each other: "google isn't my friend, google f**king hate me...! Grrr%#&#...!" when we have spend hours searching and found "Absolutely NOTHING"!!!
It was going to happen when they started selling the top of the search return.
Money always goes first and talks loudest.
Yea search engines used to be useable... Now they are just a cluster fuck. I'm fairly good at finding what I want via Google but it has just become such a pain to do so. Time to go back to dogpile or something like it's 1999...
for sure google sucks !
The search engines has lost to SEO
I feel validated! I can't believe your level of frustration reached the point that you had to record a rant about this, I was *just* searching for laser printers last week and ran into the exact same issues! It was maddening and I had to give up, I didn't have enough time to go down that rabbit hole.
Yes, search engines no longer supporting the Boolerian filtering combined with the focus of trying to find out what the people "want" instead of what people are "looking for" really cause a huge bubble.
Duck Duck go.
Get a brother, maintain it, it'll last for years
@@bobking7347that’s not true anymore. My old brothers were wonderful but I lost one to an elderly parent and the other was lost in divorce lol. Brother has lost its way
@@bobking7347 Yes specficly im looking into buying Brother HL-L2445DW and I did deep research :) Dont know how it is in USA but I always start by looking at pricerunner and then google stuff...especially youtube reviews.
I've been servicing laser printers for decades, here's my take:
Try adjusting your media setting to a heavier weight. Your machine may actually have enough heat, if set correctly.
For smaller printers, the fuser is a component you can swap out -- try installing a fresh fuser, as it seems at least some of the fuser is working, so you may have roller wear issues. Maybe, if that helps, reserve that "good" fuser for just the special jobs to reduce how much wear it gets.
Also --- how many pages do you do at once? Try just one page at a time -- this possibly allows the fuser to have the best peak heat for that one page.
Printing on metallic paper is tricky for most laser printers -- before fusing, the toner is applied using high voltage static charges. Obviously, any media which is partially conductive can disrupt that.
That was my thought as well; I've run greeting cards on the office photocopier which is essentially an 11x17 laser + fax + scanner in a refrigerator-sized carcass and with default settings had similar results to Adam until I played with the paper type and set it to a significantly higher weight card stock and then everything was beautiful 98% of the time
could it be the the corona wire, need a good clean all the dust blowing around Adams shop, if it accessible most printer used to come a little felt pad to run up and down it,
@@dh2032 Corona wire (if it uses one, many laser printers don't, any more) could cause issues, but not THIS issue.
@@dh2032 No. Ugh. Really? If it was the corona wire then all prints would show the defect. Never mind that a corona wire is continuous and either functions or fails. When if functions, the wire may be contaminated but this will lead to excess toner (streaks) in the same place on all prints. Do you actually KNOW anything about laser printers? Did you mean charging corona or transfer corona? Doesn't matter... these are NOT SYMPTOMS of a dirty corona wire. UGH
What laser printer wide format would you suggest for him (if all doesn't work out)??
I worked in a print shop for years and used several 11x17 color laser printers. My advice would be to skip the search engines and go directly to the manufacturers' websites. Xerox, Canon, Konica Minolta, HP. I found quite a few that may meet your needs. I didn't do an in-depth comparison, but a lot of them have spec sheets available, and I bet they would gladly answer questions from you.
This exactly.
Large format color laser printers aren't really a consumer level product. So you're just going to find 100 different ones.
IMO, once you hit a certain level of a product, people just KNOW which manufacturers make the best stuff. You don't just google for it.
Our print shop as a Heidelberg Versafire digital press that works great, but I doubt Adam wants to spend that kinda money lol
Great answer! Commenting to help boost this comment!
Xerox all the way
I would recommend going a step further and using the manufacturers’ websites ONLY as a means of finding a direct contact to their sales teams.
Your rant on the search results is so true. I have done this for other products. Truly a scam camouflaged in “helpful” best of lists.
Wow I want to go see for myself now. Which have you seen recently?
Google search is trash now. Which is the sign of their downfall.
Sometimes altering your search terms can have drastic changes on the results. Techs doing repairs always use the shorthand to seach for things. So when I search in shorthand ai often get different results. Aka if I search for "waste toner full error" I will get adds, sales pages for waste toner boxes and manual pages on how to remove one. But if I search "WTB full sensor fault codes" I might get the error codes list and it will highlight the fault and show me possible repair points, bulletins and other info. Might get a picture showing howbto remove the sensor window, how to clean and replace it to get or working again etc.
If Google thinks your looking to buy it will try to sell you things, if it thinks your looking for a fault code say it will do different things. Also the same searches on different devices can yield different results.
It's all ai generated reviews, whether video or text, as a "side hustle" for ad revenue. If you don't see a person give it a thumbs down
People just don't compare the proper printers, it's a niche for a website that someone could fill.
You need to choose Thick 2 or Thick 3 as the paper type. It's not only good for heavy paper but it's also to slow down the fuser part of the printer to better set the toner into the paper. The fuser drum could also need replacing
Found this out when I tried to print shipping labels
@@somanyscientists4347 yeah the toner can stay like a powder when you don't select the correct page type
This. Thicker card stock uses hotter fuser temp and slower speed to properly melt the toner.
I do this for my Xereox Phaser when I started having these problems with 3rd party toner. If there isn't a thickness setting use Cardstock paper type. Another thing I do is run off 20 or so blank sheets before printing. This gives the fuser time to warm up sufficiently.
Former Xerox third-tier laser printer support tech here. This is the right answer. Depending on the printer, the setting may vary, but there should be one that will slow down the paper feed and/or increase the user temperature. It might be "Label," it might be a thick paper setting, it might even be a specific toner heat setting buried deep in the printer dialog's advanced settings. It might even be in the printer's own menus. Also, make sure you set up the straight paper path so the paper isn't getting curled inside the printer when you're doing those labels. On most laser printers, this means using the "multipurpose tray" (or single-sheet slot), and opening a door on the back of the printer. If all else fails, try calling the printer company and politely asking for an escalation; it's likely that there's a service-mode menu that could be used to increase the heat-but that also increases the chance of a fire, so it may take some convincing to get that info.
(Fun fact: the first Xerox copiers had a tendency to start fires when paper would jam in the fuser. As a result, they included fire extinguishers behind the front door. But since it would be.a marketing disaster to say your copier needs a fire extinguisher because it could catch on fire, the device was called a "scorch eliminator.")
Oh my god, I'm so goddamn happy that Adam shares MY EXACT FRUSTRATION with Google Search! Because, despite my numerous scathing feedback I've sent them, I'm still a nobody at the end of the day... But Adam is a well respected, *huge* somebody, and I sure hope that this issue gains traction as a result!!
Thank you, thank you, _thank you!_ I feel so vindicated now. 😊❤️
@@Rosa-lv8yw My Google-fu was strong back in the early 2000s, since the algorithm was the crude style where you had to be precise and succinct, it made it difficult for some to nail down terms to find what they needed.
Basically, had to think of the sentence/question, then remove 90% of the words lol
Today, as you've highlighted, doing that won't _quite_ garner what you're after, so now you have to append additional terms just to hone in on where Google should even LOOK on the net. But even then, it'll hand-hold by substitution of words, which often times such a small shift can *drastically* change the context of your search... thereby exacerbating the problem by returning incredibly irrelevant results...... requiring even *_more_* refinement terms... 😫😤
And it seems that using quotes around words doesn't quite work how it's claimed to, being it should treat those terms as "verbatim", no substitution, find that exact term. Yet, frequently I've had it STILL swap them out! 😔🤦♂️
To conclude this rant... lol
I noticed this regression of RUclips around 2010, but it's *definitely* gotten much worse the last 4-5 years, which might be what you've started noticing.
@@DUKE_of_RAMBLEYeah, 2010 sounds about right, for google search. YT search on the other hand, has always been trash, as I recall.
At that time, during my computer science education, SEO (Search Engine Optimisation) started to become a major part of making websites, to the point of having its own courses.
Rather expensive Software started to come about, that automated SEO for existing or building websites.
I clearly remember how I had discussions with teachers and peers, about how I thought, that this trend could and would be used for malice. Basically making search engines worse (in worst case useless), if Google and others didn't put in an effort to combat it.
What I see now, is pretty much what I feared back then.
I definitely share Adams frustration, at least on a weekly basis, and some times several times a day.
It's so freaking infuriating, how can it be possible the that all search engines are getting worse? 2 years later, it's not better, it's worse. It has to be on purpose, if you click on a bunch of things before you find what you want - they get more money. Taken to the extreme, you just keep clicking, searching, and keep failing, you end up searching forever, hopefully given the whole free market thing, someone replaces them on the top spot, then they are forcded to change their ways, but will that hapen? I don't think marketers making the decision on what algorythms produce the most dollars get that they're not even being capitalist, once you minipulate the market you're outside of capitalism.
@@smizmar8 Honestly, I've concluded that it's their creation of Search Engine Optimizations (aka SEO) that has ruined everything. Because now you're relying on the website to have put in the legitimate keyword(s) that match what content is on that page... So what I'm figuring is that now everyone is basically cheating, gaming the system, in order to get THEIR result at the top, regardless of its *_actual_* relevance.
But yea, also because the algorithm likely broken as well.
Here's an example that I suspect applies, since Google owns RUclips and I figure the YT search uses much of the same code:
I like to watch certain videos in Incognito Mode, so that watching it doesn't make Google think I'm interested, thereby tainting my Recommendations.
To do this...
First, I copy the link to the video _(via Share, as I'm using the YT app)._
Next, I go into Incognito.
Then I paste the link into search.
OH, but you can't just click search like you used to, because they've appended a unique identifier to the link, to track sharing and boat a video's reach...
So now I have to delete all that tracking code!
Now one of 4 things happens... Either:
1) it returns the exact video in question _(85% success rate)_
2) it fails, either by returning nothing OR by returning some random video, and so I have to delete all of the address code, leaving just the unique video ID _(happens 10% of the time)_
3) it finally returns the correct result
4) or it *_again_* fails, and I have to dick around further and get the video title, then search that way... 😮💨
I've determined that this happens because of underscores in the link, which the YT search engine seems to be ignoring, thereby producing said random results. 🙄
Anyways, yea, things are just getting worse, as you've said. They probably won't get better, either. And it's not like another search engine can turn up, because Google reigns supreme. 😞
[/pre-coffee rant]
Still in the same boat. Here I am searching for a decent printer, and I have NO idea what the heck to buy, because online search is next to useless now.
As a prior MFP/copier technician: Check if the print driver has an option for thicker paper, this will increase the heat and thus toner adhesion, the thicker the paper setting, the more heat (Card stock = super heat). Large copiers have this. Yes, the bulk of large formats are ink, the print head has to move such as large distance and I see that as being an issue to have have the components to apply heat and thus that increases cost and thus lowers market share. Also yes, search engine results have been horrible imo the last year, maybe ask HP etc dealership and or sales and get their salesman after you. Edit: Side note, ask all your contacts whom have used card stock tips on the printer brand and thus driver settings needed for heat. Copier dealerships, print shops etc may answer this for free out of kindness if you are polite. Ensure you use the newest print driver from the manufacturers website, PC has way more robust drivers and thus settings in my experience than MAC.
"Large Format" in the context of printers usually refers to a plotter. Without getting into a very expensive printer, you're probably not going to find a reasonably priced laser color plotter. if you are looking for something that can print on 11x17 aka tabloid paper, I'd recommend searching for "tabloid color laser printer" or "11x17 color laser printer". For your current printer, based on the small section that is getting ripped off down the paper, you may have a bad fuser. A quick check is while it's cold, remove the fuser and look at the orange(ish) roller in it and see if you can see any damage to it. If it's not the same color/texture all the way across, it is damaged and needs to be replaced. If it is good, changing the media in the print settings for the program you are using will adjust the temperature for the particular type of media which might help with the damage to the outputted print job.
Yeah I was thinking the same thing about finding a printer that does what he wants at a reasonable cost. My last company paid like 20k for a Konica Minolta color laser and even then, it didn't have every feature they offer. Business grade hardware is kind of another level and is built to print in large volumes, which Adam probably does not need.
What's wrong with SRA3 as a size?
I think this may be the case here, we have some large format printers at work and they are all for doing poster size prints, and they are all ink jets. Most small office copy machines can do 11x17, and most of them now are also network printers.
Came here to make this comment. Any “large format” printer I have worked with has been a plotter. Adam has mentioned in the past knowing what to Google (your goofoo) makes all the difference.
I've been a CAD for 10+ years & worked for various Arch, Civ & Mech companies .
All of them had the same opinion plotters. They're a major pain!
(1) The machines are expensive.
(2) The Ink & Paper Rolls are expensive (compared to the already pricey 11x17 printers) & typically require a special ordering.
(3) They frequently need to be serviced by a specialist/technician in order to stay under warranty.
(4) They're only ever used when required by the installer/fabricator or when trying to impress a customer/potential client.
(5) Many places ended up outsourcing plot jobs to avoid the hassle.
I share your frustration, Adam. Two years ago, at the start of COVID, I tried to buy an 11x17 color scanner to work at home. I bought the one recommended by Amazon only to find out on delivery it was an 8.5x11 unit that was misrepresented similar to what you described. I sent it back and got $350 credit then bought a surplus new DS-60000 for $2,000 that works fantastically.
its happening more and more with all search engines where you are incapable of searching for "specialized equipment" its infuriating. really does fell like search engines are past searching and just serve up the closest matching ad with highest revenue. even when you include strings to purposefully ignore website, force emphasis on words and so on, at some point the engine literally gives up and says i can't find what im looking for.
It seems like RUclips is similar. It'll offer me a handful of relevant videos and topics based on my search, but then regresses to other curated content unrelated to my search! I know Google just wants me to keeeep waaaaatching ads... Haha
Yeah, this is not the future i imagined, i really dislike it when devices start thinking for me, because they're almost always wrong, and when they're right, it's mostly because i made a typo in the search, something i would've found out at some point by myself.
I recently stumbled into a Google brainfart, when i Googled the difference between my native Dutch definitions of certain numbers, compared to English.
For example:
1 million = 1 miljoen
1 billion = 1 miljard
1 trillion = 1 biljoen
1 quadrillion = 1 triljoen
So as you can see, our "billion" is actually your "trillion", but Google had a really hard time understanding that.
It kept reverting back to "Detected language: Afrikaans", which is very similar to Dutch, but obviously, there are some differences, namely the one i was specifically demonstrating.
And whenever i manually switched language back to "Dutch", they still translated the Dutch "triljoen" and the English "trillion", even though it is supposed to be "quadrillion".
It did work sometimes, but if i then refreshed the page, it got back to Afrikaans, it just couldn't stay on point.
I guess it kept assuming that i was looking for "trillion" and not "quadrillion", which i wasn't, i was mainly teaching Google the difference.
So i started poking fun at Google and extend my translation searches to "Dutch triljoen translate to English. Google, don't say trillion!!!!"
Then again, i might've distorted the search by throwing in the word "trillion", but that was only after i already tried to use Google translate in the normal way a dozen times.
@@bryanflo4500 *coughadblockerscough*
@@bryanflo4500 Yeah, I hate the way YT slips unrelated curated / trending content into the search results. I wouldn't mind so much if they just had a section somewhere on the results page for it, but stop acting like it's an actual search result.
@@Feroce A big part of the problem is that Internet is actively lying to you because it's profitable to do so.
So the search engine needs to be the arbiter of truth which is a very tricky business to be in.
The term “large format” usually refers to machines that use roll feed media and print way bigger than your 11x17” (A3 to those in metric land) which is actually a pretty standard format. Canon and FujiXerox are my 2 favorite brands when it comes to pro colour level laser printers. They are generally about the size of a bar fridge for the basic printing unit and you can generally lease them for a pretty good rate if you don’t want to buy
This is true...large format towards plotters are completely different than just doing tabloid size.
I feel like Adam would benefit from a large format plotter printer that can do poster and banner sized prints, especially on projects where he's had to make multiple printouts as reference and cut/paste them together.
Heh ... "Metric land" ... as if "the whole rest of the world" were some obscure little corner of the planet ;)
@@andrewmcintosh2703 I live in Metric Land. As far as I’m concerned America is the backwater with its antiquated measuring units. Just sayin.
We used Xerox in our printing shop with great success maybe check into something like the VersaLink C7000
SEO has absolutely destroyed the quality and utility of Internet search.
ai is making it a lot worse
@@xor01 Yup! Seamlessly weaving in tons of wrong information.
5:00 The same thing happens when makers are searching for raw materials or specialty products like vinyl paint, raw pigments, large format scanners etc. I'm surprised that this if your first time encountering product search manipulation. I'm not sure who manages and promotes these "best of" product lists, but it's very very annoying.
Just anything outside of the obvious answer, basically. You can use google to find forums and other sources (like wikipedia, sometimes) that discusses places and ways to actually find wat you're looking for.
Searching for just about anything. Looking for software, how to do something, just about anything now fills with these top 10 [item] of [current year] pages filled with affiliate links. Internet search has become a whole lot less useful in the past several years. Search for something that was findable a few years ago, and you are unlikely to find it, though it does still exist. Ask in a forum and you are likely to get a response with a "how to search" link that goes to the same useless hits, from someone who knows the answer, but hasn't tried actually searching recently.
@@krsbog that's so true. If I'm asking in a forum, it's because I've tried googling it but got nothing but useless info which is all carbon copied from each other. I want a human being who has successfully performed my same task to help me in the right direction.
The same thing happens when you search FOR ANYTHING 😂. I'm not sure which explanation is scarier; human incompetence or the rise of the machines?!?!?
Nobody. It's all cases of what I like to call "SEO pollution"
In my decades of repairing laser printers, the error you showed at the start is caused most frequently by the fuser (the hot roller) losing the teflon coating causing the previously deposited toner to be attracted to the fuser and redeposited down the page. Some times the problem is started by the developer roller Usually in the toner cartridge, becoming worn and smearing excess toner onto the page. When this happens, remove the cartridge and examine the usually green roller in the cartridge for wear or excess toner build up. If you can see the actual heat drum in the the fusing assembly examine it for wear and excess toner. Never use refurb cartridges if you want to reduce the likely hood of these problems. Note don't touch the fuser roller, it's hot enough to burn you with ease. Furthermore, I have seen refurb cartridges do this to the point of taking out the fuser as well. It's not usually a heat problem, the fuser is hot and there are temperature sensors to sense any low heat problem. Some laser printers actually have menu settings that can alter the heat setting as well, but I would not assume that to be the problem.
Ditto - all about the heat!
I love reading the comments on these , there are so many highly intelligent people answering , and posting useful information . Most other pages , by the time you got to 100 comments , it would read like the Jerry Springer show , fans here , give me hope 👍
Yep, this... and on most printers the fuser assembly can be replaced.
Yeah he should check the Teflon coating on the fuser, but if it was the teflon then the image defect would be the same down the entire length of the page, mostly. The defect only started about half way down. Given that repetitive defects on most fusers repeat at an interval of 2-4 inches (depending on the size of the fuser drum) this doesnt look like a fuser teflon issue to me . This looks more like the fuser isn't get hot enough, like its loosing steam about halfway through the print. I know, difference of opinion. It's just my two cents, from all the years that I have worked on laser printers. I do think it's odd that it's happening just in the one clearly defined strip in the middle, but my gut still tells me that it's the fuser not heating up. Id love to be there and run a few other tests to see. Even a config page on normal paper would tell us if it's the teflon coating or not.
@@victoriadell614 And if I could add to that common. HP uses low temperature toner on all of their modern printers. Lower temperature, lower power consumption. Lower temperature printer, lower temperature fuser. A media that works with lower temp toner would help.
When I print on thicker stock or anything super smooth, I need to change the paper type in the print settings. Choosing thick cardstock, envelope, or similar will slow the paper feed speed to give the fuser a better shot of setting the toner.
I have an ancient 11x17 laser printer to print my music scores, but it is monochrome. It fits my needs as a composer but I've not found a comparable color option.
Adam, I love everything you do and appreciate you sharing your talent and humanity with us. Thank you for remotely enriching our lives -- I wish I had more people like you in life.
This 100%. I'm using a HP MFP M277dw for everything my family needs. I just did water decals on glossy paper for a project my daughter was doing and just selected "HP Glossy 120" paper instead of plain. I've done transfer decals for other projects the same way.
@@mungtor Use my MFP M467nw for the exact same thing using decal sheets specifically designed for laser printers. Works great!
I agree with the rant on search engines (and I am an IT professional). Well, I tried switching to "laser printer large format". It helped a little, but the problem was still there. And you can change to +laser, but then you can still get the reviews that have one laser printer and 9 inkjets. The rant is appropriate.
The plus operator has not worked on Google for around 10 years. They eliminated it so it wouldn't interfere with searches relating to their Google+ service, and when Google+ failed they never brought back the operator. You're supposed to use quotes around every word you want it to not ignore. This takes twice as long to type, and it's moot because it often decides to ignore your terms anyway.
Try using "industrial" finding a business to business supplier that maybe doesn't have exactly what you're looking for and then use their keywords, I think the professional printing industry may not use "laser" for the type of printer he's looking for
Searching for "laser" won't really help. Those "top 10" sites, all of them, are just affiliate link machines. They'll throw the kitchen sink onto the page with a list of keywords so that they'll still show up in more specific search results.
They don't care that the page doesn't have what you're looking for. They hope you'll click the affiliate link and then hope you either buy it, or continue shopping at that merchant and buy something else, either way they get the commission.
You've hit the nail on the head of the incomprehensible headache that is computing since maybe 2010. When system's sole purpose is making money rather than performing services!! As someone that works in RF I giggled at the SNR > 1 comment xD
Very diplomatic of you to go with “Laser Printers” and not “Google” in the title :)
If you're typically printing solid colors, picking up a used Gerber Edge printer and plotter set up might be up your alley. It's designed specifically for printing on vinyl, and it's thermal foil printer, not an inkjet. Then you can print and cut your decals.
Thank you, Adam. This happens more often than it should. I work in product engineering looking for novel and oddball things on a regular basis. I often hit this same problem where I get stuff that people want to sell versus things I want to buy.
This is a tip not just for Adam, but everyone else also, if you do find your self in still the mood to invest in printing hardware, dont forget to check (especially more so for Adam, given proximity in the middle of SF) for "office bankruptcy/liquidation sale/auction" postings. For the most part, a used printer is still fine, and any of the "used" parts would be the consumable bits that would need replacing anyway. You can get heavy duty workhorse printers from offices for fractions of list price in liquidation sales.
I bought my first color laser printer that way (on eBay), no one else bid on it so I got it at the very low starting price; the price was so low that when I went to pick it up (local sale), the guy was really pissed that he got so little for it, and refused to include the fuser for it, saying he wasn't going to just give it to me, I'd have have to buy it from him! (It didn't say that in the eBay listing!). I told him to f**k off, and I ordered a fuser online elsewhere, told him he could eat that fuser for dinner.
35 year photocopier/printer tech here. Just looking at your sample, I see a fixing problem. One of the largest challenges I have professionally is when users want to print on media other than 20lb bond paper that is the industry standard. You are applying plastic powder to a media and must heat it and press it at a specific engineered melting point to "fix" the toner to the media. Color technology is even more difficult as you are mixing 4 layers of different base color toner. The temperature for fixing has to be even tighter than in the black and white xerographic process. The "media type" label in the print drive is more than just for choosing the correct feed source. It will also define the weight of the paper, and set the fixing temperature and the speed the paper moves through the fixing unit so it can melt the toner properly. Just like you use a higher temperature and slower motion ironing denim pants than you would a cotton t-shirt. If you have the box for your print media, look at it for the weight rating often in small print. Measurement is typically grams per square meter these days, or g/m2. Some printers can custom set the weight for each paper type, but that is only a starting point reference. Trial and error is the normal way to figure out the correct setting. Add to that the fixing unit is a high-mortality item in color printers and will give more issues as they wear out.
I feel your pain Adam! I get so frustrated with search algorithms. It seems to me that the true metric is how much companies are willing to pay to have their products thrust upon you. Instead of showing results of the actual thing you are looking for you just get the highest bidder....
spot on!
I think the issue may be from the wording "large format" combined with "laser printer". A large format printer, which is also known as a "plotter" is not a laser printer. Plotter are usually roughly 4' wide and can print massive banners or poster or what have you. That being said, I think HP makes pretty solid standard laser printers where that problem can be easily resolved by replacing the fuser kit, which HP makes pretty easy to do (not much harder than changing out the toner).
Yep, the term he wants to use when searching for a laser that prints 11x17 is "tabloid"
the search algo thing is everywhere. You absolutely cannot google ANYTHING anymore like an answer to a question or search for a very very specific item without promoted and sponsored AI generated dogshite being pushed up and clogging up the first, second pages of search results.
Like we see here, you search for laser printers and they'll either try to sell you inkjets because they wanna get rid of cheap crap in stock, or the other half of the results is useless trite like "what is a laser printer?" and ads for the local best-buy.
You can, but you have to add AND “Reddit” to your search lol
I think Adam is basically looking for a printer dealership, but that kind of middleman sales business model just doesn't exist anymore.
I solved that problem long ago, in the days of dead tree publications. I had a friend who spent most of his time scanning ads in the paper. On the other hand, I didn't see them at all. It's still the case that I generally am unaware of whether an ad that I didn't manage to block is particularly relevant to my interests, which are also quite broad, so cats and Cats, you know? Of course, Amazon and eBay do this to me, but there I don't particularly mind it.
Yup. Windows troubleshooting feel just as bad...
It is because Google changed their default algorithm but you can still use the old one by searching something then go to search tools then changing all results to verbatim
No expert here but my wife had a very specific use case, she needed to be able to print on 110lb paper on a laser printer. So we went down the rabbit hole of consumer vs pro and stumbled across the xerox workcentre 7556. It had everything we needed, ultimately you need a pass thru or straight paper path to be able to handle the higher poundage paper. Worked like a charm and we got it for $900 usd used. You can order it refurbed online for $1500. Couldn’t recommend it enough. Feel free to reply if you have any questions.
THANK YOU!!! I went through exactly the same experience buying a laser printer and thought i was loosing my mind!. Even looking for toner cartridges is a challenge. Also,I have used my printer to print on adhesive labels and have had good luck setting the printer to really thick paper, or "cardstock" setting. It seems to print really hot and the graphics and text adheres really well!
Congratulations you have been selected amount our shortlisted winner 🎁 contact the number above.......✔️
Which printer did you end up going with?
This is exceedingly common in any highly-specific search. A few months ago I was in the market for my first dirt bike and I was looking into whether a tall and heavy guy like me could get away with starting on a 450cc bike, which are the largest common bikes you'll find and generally strongly recommended against since they're so much more powerful. I was greeted with dozens of these kinds of generic websites with "Top 10 Dirt Bikes For Beginners", and listing all of the current year's models, including the smaller ones that I had explicitly NOT searched for, with some vague bullet points about why they're good bikes that seemed to be lifted straight from the marketing brochures. Same deal with camera hardware. Same deal with graphics cards. Same deal with guitars. The only reliable sources for relevant discussion about anything anymore are dedicated forum sites for the thing you're looking for and Reddit.
Yeah, I’ve noticed awhile ago that searching for something specific is basically useless. It’s like you’re being punished for knowing enough about the subject to narrow down your search.
Researching historical gliders over here. I can relate in full to what you say. What Jay said ins true as well. The amount of digital manure you have to sift through is surreal.
One black mark on my resume as a "creator" in the software dev industry, is that I've created tools that procedurally generate webshops with intensely over-the-top SEO. Some companies use them for marketing. In fact, I just googled "large format laser printers" and found three websites in the top 30 results that have my "signature" on them. Only one of them actually displays a laser printer that fits the description.
This was something I created years ago before I knew what it entailed, and while I had to scrounge for money.
I worked as an engineer on an SEO team, and it broke my heart to see all of the desperate shops out there procedurally generating webspam for cash.
I tend to add the word “reddit” onto the end of my Google Search queries fairly often.
So, you're specially qualified to build a tool to fight your own creation?
@@stephentroyer3831 would that be considered competing tho? They Could have signed a non compete before leaving.
Yes theirs been many cases of it being overturned. Butttt that is still a possible legal battle
Please tell us how to destroy what you've unleashed.
@@Dracossaint that is a sadly likely reality. Maybe his agreement has an expiration date?
Thank you for this healthy rant. I do so agree. Watching this video was worth it for me, just to acknowledge your personal experience with actual needs when using a search engine. Best of luck with your future Laser Printer!
Xerox WorkCentre 6515 bar none. I left inkjet printing and never looked back. This printer literally made me low printers again. It just works every time. Has a great color. And has a five year warranty where Xerox actually will come to your house and fix your freaking printer.
I feel your pain. When I was a rookie truck driver, I was having trouble figuring out how to loosen a load bar (I've never seen one of these, despite several years experience loading and unloading a truck). I Googled, "how to use a load bar," but could only find websites and videos on how to thghten one. (I already knew how to do this, as it was all I could seem to do.) I then Googled, "how to loosen a load bar," but could only find videos on how to tighten one. It was so frustrating!
I was looking for videos on how to disassemble a vacuum cleaner hose (the handle) and could not find on to match my model. I ended up having to figure it out on my own, and gluing a bunch of tabs because I did not have a guide to tell me whare they were!
Here's a tip: if you include the word you absolutely require in your search term in double quotes (how to "loosen" "load bar"), Google will require those words to be non-negotiable in the search results and you're more likely to find what you're looking for. You can also add a minus/dash in front of words you DON'T want to exclude them (how to "loosen" "load bar" -tighten), though you run the risk of excluding results that may talk about both loosening and tightening.
@@notoriousresearcher
"Google will require those words to be non-negotiable in the search results a"
If only that were true. Its SUPPOSED to work that way but I often get a lot of results, near the top of the search that are not adds, that even mark it as not being there.
I can just hear them saying, "We know better what you want than you do!!! Trust us! Send us your money and be happy! You don't know what you want!”
@@ethelredhardrede1838 Paid ads seem to override any logical operators in the search string.
Adam, you have to slow the printer down so the toner gets hot enough to adhere to the glossy surface. Many laser printers have heavy weight paper or gloss paper settings that will cure that problem.
Owner of a professional print shop for over 10 years.we run eco-sol printers (mostly Roland) and i think it's what you would want for your needs or perhaps a layex printer. Roland makes some smaller hobby style for not a lot of money.Yes they are higher maintenance and not a "hit print and go" solution. But would be durable and over a lot of options. We Would happily print and digital die cut whatever custom stickers/decals you would ever need. Cover the shipping and they are yours!
I came here to say exactly this. Eco solvent print and cut printers allow you to do real vinyl stickers, paper prints, metallics. We've fed all sorts of materials through ours. Worth the investment.
I have a couple of Brother laser printers. They have settings for the paper type and setting it to the thicker types will slow down the print speed so the page spends more time under the fuser. They also have an "improve toner fixing" option that can help when printing on some heavier types of paper.
You don't want one with an excessively hot fuser as that would be a fire hazard if there was a paper jam in it.
I have switched to just Brother laser printers. I got tired of HP forcing their ink and haveing experation date on it.
So a couple things that can help with the "noise". You can put double quotes around a search term to have google require that term in the results instead of trying to guess what you really want. You can also put a minus sign in front of a term to have google exclude results with that term. So you could search "large format" "laser" printer -" best" and get a lot less noise. If you click the settings icon at the upper right of the google page, there's also an Advanced Search option, which will help you narrow your search results.
I work in the industry, take a look at xerox versalink printers. They're low to mid end, took over the phaser line. You can absolutely change the fuser temp to whatever you want, I'm just not sure how much information is public.
He’s looking for a large format laser printer.
@@HairyBottom versalinks print tabloit 11x17
"All of my rants end in a rant about late stage capitalism" might be one of my favorite adam savage quotes
After years of watching machining and maker videos there’s finally a question I can help answer!
My dad has been been selling and repairing printers, fax machines, and typewriters for 30+ years and once upon a time I used to help around his shop so I have some insight to this question. Now I don’t know as much about large format printers so this advice might change based on that. But first off I would say you should actually look for a reconditioned professional machine. A properly re-built/taken care of professional machine will have the build quality and longevity of 10 consumer ones. At this point consumer printers are ewaste garbage that are meant to be replaced whenever they have one thing go wrong. Age also is less of a problem as long as you can still source toner/parts and even older laser prints will have enough quality for what you want. As for specific printers I would focus less on a model and more of a brand. Avoid HP at all cost because they are cheap and garbage. Xerox are better but too proprietary. Personally I’d recommend a Kyocera, they’re not really known in consumer markets but they’re quiet workhorses. Brother would be my second choice, the consumer stuff isn’t as great but the professional things are solid and more common.
In terms of finding a machine you should look around for either a local dealer or an office liquidation company. Either are likely to have professional stuff you could buy.
I’m not sure if any of this info is helpful but I hope some of it is!
Two minor addendum‘s to this. HP’s professional stuff is better than consumer stuff, but I still don’t love it.
And I kept my recommendations to laser printers, but based on what you use a printer for I would also consider a sublimation dye printer. They often come in larger formats and are what are used for printing on canvas and other materials. They have their own quirks, but it might be better for your use case.
Wow.. seems like you have great advice here… hope Adam reads yours…
As a few people here have commented, you can get off-lease Xerox or Konica Minolta floor standing copy machines for very good prices. They will include 11x17, 12x18 or even 13x19 printing, 11x17 scanning, and fast multi-page scanning, which can be SUPER handy. Try pricing out a standalone 11x17 scanner!
These printers also have very good toner pricing
One thing I haven't seen (although I didn't review all 2k+ comments is that the print driver should have different kinds of media settings. Properly setting the LABELS option or similar will give you more heat, as will settings for thick media. That clearance is actually very important, and if too low or too high for the material, it can mess things up.
fudge I literally fell into this trap last week and had to cycle through a million awful printer options while looking for laser printers for my office.
loved using xerox when I worked at a print shop. would agree with previous comments that changing paper type to slow it down can help, have used plenty of non standard paper stock and you just have to play with settings till it prints correctly. also could be dirty fuser or drum from all that toner that isn't sticking to the paper.
Yeah, I loved using their DocuTech machines! We used to *joke* it would print on sheet metal. I sure did a "Buckwheat" (Little Rascals reference. If you don't get it, you're too young.) when we were able to run index tabs (for separating sections in a catalog or manual with plastic tabs) without any adjustments whatsoever. It was truly astounding when you're used to any nonstandard paper jamming frequently.
For us IT geeks, I feel your pain! SEO makes looking for solutions a nightmare. But I hate printers, so, no suggestions from me. Thanks for the video!
One of the resons I actually find linux easier these days is that there is a lot less AI generated content on the web compared to the endless listicles telling you to try running chkdsk for every issue under the sun...
I think we'd all like to do an Office Space on a printer every 6 months or so. Bastard machines.
@@TheToric that may be true for the more obscure linux things ... but as a newbie I've already run into similar listicles and youtube videos for Linux problems.
The need to be found outweighs the need to provide to actual provide useful info.
If it wasn't for Stackoverflow then I'd have similar problems when looking for answers to progamming problems.
Check the supply status from the information page of the printer, you might find that the Fuser in the laser printer is due for a replacement with a fuser maintenance kit. I run laser printers in a cold warehouse without any printing issues.
This is the correct answer. Fusers in laser printers are considered wear parts and need to be replaced regularly.
What I have found is when you want something more Niche/robust/specific/etc. Is I find a company that makes the product and search on THEIR website. In this case, it looks like you want something that essentially Commercial Business grade. Which is a small market, so finding the top companies and searching there is the way to go. Not saying anything you said here is wrong, you are totally right and have an amazing point, just pointing out what I have found works to find the specific tools I need.
I love this format of video. Adam just telling it how it is and very much relating to the average maker in terms of the frustration that comes with trying to even find a part or tool.
A quote comes to mind from Futurama where Fry says “shut up and take my money!”
more and more I’m brought to the conclusion that anytime I’m trying to buy something I need or want there making it more and more difficult to do so! I’m only 20 years old aswell!
Even if you know how to work the tech you need to buy something it’s a hassle!
You probably want a dye sublimation printer. You can print in UV- and water-resistant dye, then heat transfer the image onto almost any material. It's a total gamechanger in the shop. I'd suggest a Sawgrass SG1000, but any signmaking or garment printing shop should be able to give you a recommendation.
Yeah.. was thinking about this.
This
Was also going to suggest this as an alternative.
Hi Adam, as others have said, part of the issue is including the "Wide Format" as a search term. While we know you are trying to find something that will print ledger sized documents, Google and Amazon think you're looking for a plotter or banner printer, which are almost exclusively inkjet. This confuses the algorithms and produces more crap results than usual. I would try being more specific in your search terms and specifying the general model for the manufacturer you want to spec out. For example, a search for "Laserjet" should generate almost exclusively HP laser printers, while searching for "imageCLASS" should generate almost exclusively Canon laser printers. Adding "11x17" to the search should filter it down to printers capable of handling ledger sized paper.
I agree with many people that “large format” refers to a significantly larger printer. You want to search for “wide format” or even “tabloid” instead
Or A3
But def not 'large format' - the world of large format is dominated by ink jet roll-fed business and commercial machines
Yeah, I often find my Google searches to be ads first and then garbage after that.
Especially when searching for products. Usually asking a question works somewhat better.
Adam when it comes to printing in 11x17 you are more likely to come across inkjet printers just because the use-case for prints in that size leans more towards graphics and images. Having said that I think the HP Color Laserjet Enterprise M750n is EXACTLY what you need. I normally recommend Brother for laser printers but in this particular case HP has built an absolutely fantastic printer and I believe you will be more than satisfied with its capability.
Adam, been in IT for thirty years and have torn down various printers to the screws. I’m sure you have likely already tried changing settings to heavy or thick card-stock. Those types of settings are a given. Your problem is contributed to heat, uneven heat in particular. The striping you are getting is due to the toner not adhering to the paper, more likely due to damage the toner drum than the fuser applying the heat to print. Cheap or off brand toner cartridges typically cause this issue. All that said, my personal favorite for a laser printer is an HP. A LF color printer 11x17 will be expensive but would be worth it as there life cycles can be 150,000 or higher. Xerox is my second choice and either again will have what you need for a price. I will provide a recommendation in another comment as this one is getting long in the tooth. :)
Yes, this, if card stock settings are failing it will be issue with hardware components as stated.
Ok so first off, “large format printer” means something different to what you think. Large format generally means around A2 or larger paper. At those sizes most printers are plotters which are ink based. If you’re talking 11x17 you should search for A3 laser printer. But even then you don’t really need to search. There’s only half a dozen brands so you’re better off just checking the specs for each of those brands:
HP
Konica Minolta*
Brother
Kyocera
Fuji/Xerox (personally I hate these printers due to driver issues)
Ricoh*
Canon*
*these guys are kind of the top 3 in office laser photocopiers / professional laser printers and they all make desktop units so I’d start with them.
These are called tabloid laser printers in the US, since 11x17 is considered tabloid size.
Something useful in this context is adding +"laser". This tells the engine that you're only interested in the word laser and will prioritise those results. You still get crap but it's less crap when you tell Google that the word laser is more important.
Just quoting it is enough AFAIK.
The pages that Adam was talking about still have the word laser in them somewhere even if none of the printers are actually laser printers. This is a great tip that normally works but unfortunately not in this case. :(
That can help but also tacking on -inkjet and/or -ink jet.
I've had times where searching for more obscure things required filtering out the noise lest I need to look through pages of unrelated content.
@@paulmarchesi7020 Even if that "somewhere" is hidden text just for SEO.
Slam enough keywords in every combination into every corner of your site, link and link-back (even farmed), farm clickthroughs and rake in the hits.
Makes me long for the days of AltaVista. It had some pretty good advanced search mechanics that I haven't seen the equivalent of in a online search engine since.
Sure AltaVista was far from perfect but it was pretty powerful. To be honest though I haven't really made a habit of testing new search engines. It's the curse of "good enough", and Google have managed to fill that niche so far.
So how many real search engines are there anyway? With real I mean that they have their own database and spiders scraping the net for data and are not piggy backing on search engines like Google, Bing and whoever else.
Fortunately I don’t need a laser printer for my needs. You have my sympathies (not that they will be of any help, of course). I am so sick of the borderline fraudulent behaviour of laser printer manufacturers, with toners that ”run out” long before they are actually empty. My refillable ink printer needs to be used once a week (I’ve scheduled it), but has worked like a charm for years. The paper costs more than the ink. I love it. I do indeed sometimes need to protect the print when weathering. I use airbrush matte varnish for that, but that might not work if I needed to do it very frequently.
For your applications you may also want to look into UV fusing ink jets. They can print really robust lacquers, and even do relief.
The disembodied hand in the background over Adam’s shoulder at 2:20 is pretty creepy.
I'm glad someone mentioned it!
Wait! What? Where?
Showed up at :53 and vanished at 2:34. I was reading through the whole comment string.... looking for anyone else who noticed it lol.
@@anthonymara4533 OK! Over his left or right shoulder?
@@lisa-mariegray5510 Left side of the screen, over his right shoulder.
Have you tried going directly to Canon, HP or Ricoh, etc to see what they might list on their sights? Maybe they have a different way of naming this printer and it will help your search?
Printer tech here as well, but a second hand printer like a xerox 7535 should be about $600 I got mine for $400. Adam your smart enough to repair it as all of the service manuals and nvm values are online. Great project that has great results.
While it does not always work, adding quotations around the vital parts of your search frequently helps me a great deal when I'm getting a lot of noise. In this case it might be: Large format "laser" printer, or the like. For printers specifically, I have prior knowledge that HP and Brother are two of the main producers of sub-professional laser printers, so I started there when looking for a color laser of my own. If you're going pro/commercial-grade, Konica-Minolta is widespread, but I will warn that they have very specific incompatibilities with anything Windows 8 and newer, and they are aware of them but are uninterested in resolving them.
Watching this while I’m at my printing job in London.
Try to find a wax toner laser printer. They are more efficient and robust. Its just a regular laser printer which has wax mixed into the toner.
I love a good rant
I used to have this very issue with the old Minolta I had - the solution was actually stupidly simple ... in the settings option I changed the paper type to the thickest, heaviest card stock available in the options - what this did was print everything as it normally would, but at 25% feed speed ... yes the print speed was awful but I never had a fusing issue on anything weird with that setting (paper naturally I printed normal speed)
so, check settings maybe? I believe Brothers work the same way - just tell it you're running heavy cardstock and watch it slow!
thank that would be salutation, simple too, and nothing more need than he has already!
In your printer driver, pick the thickest paper possible. That will get the drum as hot as it can go. Also check advanced options and see if there is an “improve toner fixing” option or any option to heat up the drum as hot as possible.
you usually have settings in the print driver (printing preferences on windows) or on the machine to match the stock you are printing on that will get the toner hot enough to stick to the page you are printing on, most printers are capable of doing that. konica and ricoh are favorite printers. if you are doing any business type of printing you might as well just get a full size copier (cheaper to run in the long run and easier to fix) or you can lease. you can get one that's a little smaller also but konica and ricoh also make consumer size machines as well that are much more well made than your typical hp, canon and epson printers...
Adam, your rant is becoming my rant. This last week I tried to do a web search for either a video c-stand or a stationary gimble to mount a projector for my home computer. All I got was crap, and crap, and more crap. I am also nearly dealing with the same problem for the projector itself. I finally turned to a local camera store to ask about such technology. Yep, they have it; Nope its not in stock. But I found a pathway towards what I want.
Same issue on RUclips which led me to this video. Just looking for the best colour laser all in one printer
Have you tried cleaning the fusor?
Fusers don't get particularly dirty. At least not until they're at 400k prints and nearly end of life. I doubt he's hitting that.
Beyond any incapability of the printer, if there is any damage or anything on the fuser rollers or image drum, you will get image defects. Often image drums are built into the toner cartridges and some places will reuse old cartridges and just refill them, which is of no use when the built-in image drum is damaged or worn out. Another thing to lookout for with the sticker media is to make sure it is designed for laser jet instead of ink or thermal printer as they can affect the quality of the print or can gum up the laser jet.
Pigmented Inkjet Printers like the Epson R3000 (an older model) doesn’t run, fade, or does not bleed when water is applied. As an artist, this is brilliant printer for my needs, and possibly yours too!
There's an old adage, "If you sold the customer just what he wanted, you haven't sold anything." We're all constantly under a barrage of garbage.
That's why people sell their souls before taking a Marketing position. They'd just get in the way of profit.
I had this same issue recently. I've been looking for bone conduction headphones for the shop so I can still hear everything happening around me and I can hear my coworkers trying to talk to me but the Google results are just auto generated lists of the top 10 and it's infuriating to me
Aftershokz are the only brand of bone conduction worth looking at, everything else is a lower quality copy of their designs.
Sony LinkBuds would work
I feel your pain, Adam. It doesn't matter what you search for these days, the results are always the same that you experienced.
I have a Canon ImageClass color laser printer that works really well. I use it to make labels and multiple types of transfer papers. Both the paper and vinyl type of adhesive backed papers haven't had any issues. Also have used it on transparencies for making cyanotype print negatives without issues. The drawback would be you can only get them up to legal size paper. I haven't really found any laser printers that go up to 11x17. Mostly that size is used in photo printing and they pretty exclusively use ink-jet style printers with special photo papers for the most photo-like results.
If you don't mind a bit of tuning and maintenance, by far the most flexible option is the ancient giant, HP Color LaserJet 5/5M. Its a heavy beast, but it is A3 (IIRC) and has toner tanks you fill up from a bottle. It does 1200dpi but not as nice as a modern printer. Consumables are still available. I's suggest looking for one (or similar) in a walk-in printer repair/resale store and talking to their technician. They might be able to make the fuser a bit hotter if it isnt good enough already (no DRM or tamper protection) or suggest something else that will do exactly what you want.
I worked with HP LaserJet enterprise printers, and I can tell you that their large format laser printers are among the best. They are not cheap, but they do have specific profiles to print on a variety of materials from regular paper to acetates and other strange materials. Their fuser assembly can get hot enough to make up for this with their large formats.
As far as the consumer-level laser printers, the issue is that they have to keep their energy load limited to around 1,200W due to the limits of most residential power outlets and is not really a cost cutting measure for these types of printers. Is all about safety.
With that said, make sure that wherever you install your new pro laser printer, the outlet can handle 30 amps of current so the fuser can get hot enough without tripping your breakers.
Holy poopoo, they need that much? I do most of my welding on a 16 amp circuit
@@beardedbaldingoldfartbutyo6985 Oh yeah, I think the differences are if your 16A circuit is for 240v versus 120v, you would actually use more power than a laser printer due to the higher voltage.
Even so, is not the same heating up a single tiny point with a welder as opposed to a wide area over a rotating cylinder. The load is momentary just to heat up the fuser real fast though, so if you keep the power saving on the printer to a minimum it will never need to ramp up at full power when you use it.
You should use search modifiers like: "large" "laser printer" > the quotation marks will only give results with that exact string. Additionally using a modifier like a minus (-) before a string will omit those results.
e.g. "large" "laser printer" -inkjet -jet
That's not going to help because he's getting sites that have the text "laser printer" but are not actually referring to laser printers.
@@philopharynx7910 Yeah, and those sites seem to be like a database of search algorithms, which probably means that most people actually get what they were looking for, despite using the wrong words in their search.
Which in turn screws over the people that actually have a bit of knowledge on it.
Which is also how language seems to 'evolve' over time, but yeah, that's something for another time.
I just tried to search for "wide laser printer" and that seemed to work, but i'm not sure if it's exactly what he needs.
I actually did the google search as he said to. And I landed on the same link that he did. Lol. I love interactive content!
Sometimes you have to target the search engine by category then sub-type. So, when you typed in "Large Format" the search engine started looking for large format anything, then it prioritized printer and then laser. I realized this as I listened to you and tried this search line, "Laser Printer large format". I got mostly laser printer results, many were larger format (bigger than 8.5x11) with a price range from $300 to $1700 dollars.
Printer Laser Large Format got me even better results with more professional "Wide format" options.
As someone who works at printing company (we have from the old school platen presses all the way to state of the art laser presses), laser printers are typically sold through distributors because their primary source of income is leasing and support contracts. They will still sell them outright, they just want you to go through their sales pitch first. They also typically will let you come to their local show room with a usb stick to test print anything if it means a sale.
Printing metalized anything with a laser printer can be problematic for a number of reasons. First, toner moves inside the printer to the substrate based electrical charge differences and metallics tend to through that off. Second, yeah, metallics reflect the heat needed to fuse the toner.
I own a company and our core specialty is helping customers find the right printer for their needs. We carry every brand. More than happy to help - might even be able to get you a demo or something. Let me know if you’d like me to reach out.
Not based in New Zealand by chance?
@@PetrikNZ they can still find the printer reference matching your needs and then you can source that model locally from NZ.
do you recommend your printer? I need a COLOR home laser printer for my sons homeschool projects and my art projects. Google searches are just the ABSOLUTE WORST. I fell in love with the canon LBP612CDW I purchased for where I worked at the time. Now I can get it because they don’t make it anymore AND I can’t figure out what’s the next generation that DOES NOT have a ton of extra shit I don’t need. I just need a color laser printer with AirPrint (added bonus would be 11x17 at this point). Otherwise I’m going to have to end up with some monster machine that I can’t fit anywhere but my garage (and that would just fry the machine in the Texas heat).
I normally append "reddit" to the end of my searches if I'm looking for product reviews. I invariably get some reddit posts in whatever subreddit that is dedicated to the type of product (in this case r/printers) with some recommendations.
This^ hope adam does a follow up on this unrelated to printing
Works often but NOT WITH MATTRESSES
Yeah, this right here is probably the easiest, least time-consuming thing to do that has the biggest impact to your search results. Works great when troubleshooting computer issues as well.
I realize this is two years too late, but the Gerber Edge is a Thermal Wax printer that prints spot colors on a variety of 3m vinyls. What's really cool is the ability to print white, a slew of 3m colors in addition to mirror chromes and flourescents in a variety of colors. I used it a lot in the racing industry for modern cars, helmets, & vintage decal replication. The only thing we found to remove the color was brake cleaner (Race teams like to use it to clean the cars)). Every other solvent and clear coat never had any issues with the color. it can also print on lexans and such for instrumentation panels and such. Longevity vs UV (Except flourescent colors) is superb. I put a red decal on a gutter downspout facing south and it hadn't faded after 5 years. The con is it's way more involved than just printing on a laser printer, and it's limited to a maximum print height of 11.8".
The pros are you can work with any area local sign shop that has one, and they will be able to get you what you need if you provide them with the concept and/or finished art. So you don't have to get one and learn a bunch of sign making stuff...
So like a bunch of others, my first thought would be to up the thickness and paper types in your printer driver. That tweaks how hot the fuser gets and how it feeds it through. Failing that, I've leased Konica and HP machines to my clients for years and they're both pretty solid.
Go straight to a local rep for one of the larger manufacturers. It will surely cost more but you will get exactly what you need. I used to think that the lease option was for suckers but my old office used high output laser printers and the support, supply distribution, and ability to upgrade when the new hotness came out was a game changer. It sucks to buy a machine that costs several thousand dollars and be stuck with it when you find something better in a couple years.
As the saying goes: If it floats, flies, or f**ks...or prints, rent it.
As a offset press operator, nothing beats ink on paper but I get the quick one off runs for sure. I would try a print shop that has a digital offset press that can do small runs.
"The signal to noise ratio has passed one"
I'm guessing this whole situation is going to get worse. I can imagine a time in the future where the first four or five or ten pages of a google search are worthless procedurally generated junk.
The future? We've been there a while now sadly.
He actually meant, “fell below one”
Look for a (used) business MFP in A3.
Talk to the dealer about getting test prints.
These machines cost thousands new, will need regular preventive maintenance, but are of much better build quality.
If you havent settled for one yet, the HP Color LaserJet M255dw I can recommend.
Specify paper size and type in the driver and hopefully itll work well for you.
All modern generic laser printers have same issue. Have you tried to use a transfer media? I explain myself, you print mirror on a transfer paper. Then with an hand iron you transfer it to the hard surface. It works great and also the transfer adds a protection layer on the image
Adam, the internet was ruined years ago, how are you just finding this out? The trickery and garbage that search engines return now makes it impossible to find what you are looking for easy.
it’s a lot worse with AI now
Lately, I've found Kagi to do a much better job than Google. It's paid, which is a bit annoying, but also the reason the results are better (being paid means no ads,and not as populat, so less targetted by marketers)
Printers are a sham. It’s 2022 there’s no reason for 90s era issues with printers.
Ink jet printers need to go away, permanently. "Oh but theyre cheap" yeah like a McDonald's kids toy
Here's you problem: "large format printer" is a product category that is entirely populated with inkjets, and generally refers to printers with a carriage width of 24+ inches. Oh yes and arsey page optimisation that is throwing every printer term at their page. Those pages are designed to capture weird searches, and they worked!
Try searching for A3 or A2 "laser printers". But be warned an A2 laser will be very expensive
I actually use a Brother, in A3, at work, for running off size ”B" manufacturing prints. It works like a charm, for the most part... Though I'm not sure how much the toner cartridges go for.
When I sold a lot a printers some years ago. Brother printers had the reputation of getting hotter than most others printers. That was the reason why they were harder to get unofficial toner for it. Try look them up.
adam!!! i know im a year late. but i just learned this recently, using " " around a word in your google search. and a minus sign(-) before a word are verrryyyy useful tools. the quotes require the word to be in the search and the - omit a word in the results. so something like ( Large format "laser" printer -ink)
Most people dont realize laser printer drum units have a limited life span. Not only that, they need to be both cleaned and replaced with time and usage. Heavily used printers will need their drums replaced more often. The environment, such as dust and humidity can affect laser printers, as well. On a side note, this wasnt a rant on laser printers, but on Google search results.