Well ofc they wont blow up but it causes extreme stress to the parts because oil is coming at the same time as gas and when you engine break it revs and there is no oil. And thats just not how you ride a 2 stroke
FinKillerZ pelailee yup. like my friend. got a 5,5hp cylinder for his Honda mt5. and guess. he drives it like nothing. he knows that he should break it in but he doesnt Care. and on the piston small Pieces have broken off. but it runs. he took the exthuast off just too see if any damage had happen. and yes it had, saw it today. if u have any social media i can show you
Parabéns pelo trabalho, sou de alcácer do sal e por cá também gostamos muito de dts e afins, no meu caso tenho uma dérbi já é a segunda e tem italkit 86cc c45mm e brk 30mm, também ficam motas daquelas "sem paciência" como deves saber, continua a fazer vídeos com material do aço que qualquer dia é só aspiradores elétricos :)... mais uma vez parabéns pelo 2t forever
What did you have to rebuild to make the engine fit? There's someone on facebook that claims you just built a support for the bottom part of the engine and the engine mount that connects to the swing just bolts on
this was pretty cool vid and stuff but u guys really should pull the clutch in and stop engine braking like they built such a cool bike and can't even ride a 2-stroke :^/
cool bike, people dont like the exhaust but i kinda do. The only thing wrong with this video is the engine braking and not breaking in the cylinder and piston
i ride a 4 stroke and i engine brake all the time since the brakes does it too hard... now, do you always have to use the breaks while riding a 2 stroke? seems stressfull to always think about that when riding?
Engine brake ist pretty bad for a 2 stroke, because iff you're giving no gas the engine is not lubricated enough and that's the problem. A 2 stroke has the extra oil in the gas and the oil is there to lubricate the engine. So iff u are slamming the brake you shouldn't go off the throttle. After a year off 2 stroke riding I must say it's not hard because you're doing it even iff ure not realizing so not a big prob I guess.
@@str3ke537 engine braking on a 2 stroke isnt as bad as everyone says, engine still has gas inside the crankcase lubricating the engine and still getting gas, otherwise it would be like you just switched of your ignition
Hi man, nice video! I just got a 2005 dt50, but it does not rev up high in 4th, 5th and 6th gear. It got a 50cc cilinder and LeoVince exhoust. 17,5 mm carbarator. Do you have any suggestions?
hi even I would like to make a similar modification on a beta in your opinion is better engine of the yhamha yz 85 or kawasaki 85 honda 85 suzuki 85 or ktm 85?
Boas, tenho uma Ktm 200 sx ela está com a transmissão de origem 14/45 acho eu (já teve cremalheira maior) mas mesmo assim esgota muito rápido só dá +/- 90 sabes o que é que pudera estar mal? Como já vi que percebes da coisa resolvi perguntar sou novo nisto xD
Didnt find any plastics. Well there was an option for 150$ but that was too much for me because I would only need 2 plastics not everything, just ask someone from motorcycle parts shop near you
at the place where i asked, they said they would need to import it from other country of course, they didnt give me a link or anything, cause i would just buy directly from them then :D try to contact other scooter parts shops
2:00 Now that's how you break in the new piston and cylinder
@NoNoNoNii why?
@@nathaniel.h7124 u dont need to brake in motocross bikes
@@arttuwallari3565 i had a motocross bike and i had to break it in 1 fuel tank from full to empty break in time
@@arttuwallari3565 Kai ymmärrät et crossipyörätki sisäänajetaan.
@@Robss6969 nii niitä lämitetää ekat 15min jq sit anetaa ja jäähtyy ja sit taas lämitetää ja vittusti leipää
This guy knows how to tune these little yammy strokers 💯🤟
Engine braking... Im dissapointed you built this beast but can't drive a 2 stroke :D
stop bitching... 2 strokes wont blow up because of engine brake, they blow up because idiots cant mix oil or tune carb
Well ofc they wont blow up but it causes extreme stress to the parts because oil is coming at the same time as gas and when you engine break it revs and there is no oil. And thats just not how you ride a 2 stroke
45465 4654645 2strokes blowup from engine braking dumbass
Sekuli can you explain engine breakingnto me
Sekuli can u tell which part was engine braking
You build it like a pro but cant ride a 2stroke
Vqle - Minecraft says minecraft player...
Tehomopoo joka ei väännä alhaalta kuuluu ajaa tollee ni on kokoaja piikillä kiekat
Vqle what are you talking about
lac cila moottorijarrutusta tää jätkä tarkotti...
Getaway Osmo nosiis oha tos moottorijarruuki mut pysyy sentää veto päällä ku ei turhaa kytkintä rasita :D
did you run it in bed the rings? did you warm it up or just rip it? R.I.P to that bike its a shame
isnt that bad as a first start, to rev such high rpm even when its a nikacil cylinder? What A Beast!
NO problem , end explode i put a new one
BARacing you crazy 😂😝
@@BartPaashaas daddys money
@@aslakholappa3873 he is not a child bruh..
@@aslakholappa3873 he owns a whole shop how is it daddy's money
have you ever heard of breaking in an engine and warming it up?
jonnyontwowheels lel.. lol im crying. CAUSE OF YOUR DUMB COMMENT
Jonas Fridlund how is that dumb,that is what you should do when you get a new piston etc.
i know but i meant that dude who builded it knows that. hard to explain lol
Jonas Fridlund well if he knows that and doesn't do it then he is kinda dumb,a 112cc piston probably cost quite much
FinKillerZ pelailee yup. like my friend. got a 5,5hp cylinder for his Honda mt5. and guess. he drives it like nothing. he knows that he should break it in but he doesnt Care. and on the piston small Pieces have broken off. but it runs. he took the exthuast off just too see if any damage had happen. and yes it had, saw it today. if u have any social media i can show you
1:44 look at the footbar when he twists the throttle xD
yes :)
nice VIBES ;-D
Grande pastilha ! Sim senhora ! Bons videos e bom canal .
Baaaaaaa p Racing ;)
Parabéns pelo trabalho, sou de alcácer do sal e por cá também gostamos muito de dts e afins, no meu caso tenho uma dérbi já é a segunda e tem italkit 86cc c45mm e brk 30mm, também ficam motas daquelas "sem paciência" como deves saber, continua a fazer vídeos com material do aço que qualquer dia é só aspiradores elétricos :)... mais uma vez parabéns pelo 2t forever
What did you have to rebuild to make the engine fit? There's someone on facebook that claims you just built a support for the bottom part of the engine and the engine mount that connects to the swing just bolts on
è il 50 più illegale che io abbia mai visto ahahah spettacolo puro
this was pretty cool vid and stuff but u guys really should pull the clutch in and stop engine braking like they built such a cool bike and can't even ride a 2-stroke :^/
No Problem
It’s a dirt bike u don’t need to pull in the clutch
Those 85 cc engines are sick. (O.o)
cool bike, people dont like the exhaust but i kinda do. The only thing wrong with this video is the engine braking and not breaking in the cylinder and piston
Super cool moped i love the sound and how this beast is driving
Did you have to make brackets or did it just slot in ?
Gostava de tirar uma dúvida o que acham da DT x a 85cc ? E se é uma mota que dá muita barraca ?
Ei oo fygyst kii
Lerppanokka 482 sanot sinä
Lerppanokka 482 oi
Lerppanokka 482 kyllä
No ei tosiaa, silti jarruttaa moottorijarrulla :'D
0:20 Sounds like GTA:SanAndreas sanchez. LOL
:DD
was the yz front fork a straight swap? im thinking the same forks
no you have to change
That’s not a motorcycles... that’s a fuc*ing monster😍😍
The best 2 stroke YAMAHA!
Idzie jak wsciekła :D
i ride a 4 stroke and i engine brake all the time since the brakes does it too hard... now, do you always have to use the breaks while riding a 2 stroke? seems stressfull to always think about that when riding?
Engine brake ist pretty bad for a 2 stroke, because iff you're giving no gas the engine is not lubricated enough and that's the problem. A 2 stroke has the extra oil in the gas and the oil is there to lubricate the engine. So iff u are slamming the brake you shouldn't go off the throttle. After a year off 2 stroke riding I must say it's not hard because you're doing it even iff ure not realizing so not a big prob I guess.
@@str3ke537 ahh, gotcha
@@str3ke537 engine braking on a 2 stroke isnt as bad as everyone says, engine still has gas inside the crankcase lubricating the engine and still getting gas, otherwise it would be like you just switched of your ignition
Hi man, nice video! I just got a 2005 dt50, but it does not rev up high in 4th, 5th and 6th gear. It got a 50cc cilinder and LeoVince exhoust. 17,5 mm carbarator. Do you have any suggestions?
to the stock engine you have a lot of material
i don't like 2 stroke but this swap is amazing !!
where did you buy the plastics, clutchcover, steering, clutch handle, rims, and everything other parts that wasnt to the engine,
i sold
Muito fixe!!!! Projeto 5*
Só uma curiosidade? Andas com a mota na estrada? Matrícula?
boas a moto esta toda legal ....
2-stroke bikes really like engine breaking, especially on the first rides
se my videos i do this alot
Cops: Pull you over, see you doing that
You: It's completely stock 50cc
how modificed the frame of the dt to fix the yz engine in?sry for my bad englisch
Did you have to modify to install the forks?
the 85ccm engine fits in the dt or did so some adjustments
need some ajust
Do you maintrnance it like a motocross bike? Oil changes in every 5 hrs etc?
nop is normal
how much needle mod dt engine kkiinnikeitä näyttä että etu kiinnikeet is originals
Qual é a config da cremalheira? Atualmente tenho a minha a 70cc e ta com 13x53
Nice engine braking
hi even I would like to make a similar modification on a beta in your opinion is better engine of the yhamha yz 85 or kawasaki 85 honda 85 suzuki 85 or ktm 85?
Massimo Facchini i like kx 85 engine most.
Boas, tenho uma Ktm 200 sx ela está com a transmissão de origem 14/45 acho eu (já teve cremalheira maior) mas mesmo assim esgota muito rápido só dá +/- 90 sabes o que é que pudera estar mal? Como já vi que percebes da coisa resolvi perguntar sou novo nisto xD
tens algo muito grave nisso se so der 90 tens que levar ao mecanico
did you have to modify the frame to install the yz 85 motor
yes , I made some new supports for the engine
1. ekalla käynnistyksellä vitullista huudatamista 2. ei puhunu mitään sisäänajosta 3. ei kytkintä jarruttaessa....
how much work was it to mound the front fork ?
Is it possible to put an yz 250 engine in a Yamaha dt
Yes if you have a welder.
When you do wheelies i think you are very happy :D
Nice engine goes like crazy :)
yes crazy bike
Very nice dude !! 😳🙊🚀⚡️
Szép bejáratas
How well did the engine fit?
some modifications
Nice project. I'd like to see you do this with an Aprilia RS50; great bike, but so under powered.
Does the yz 85 engine fit in the dt frame with out replacing engine mounts?
no
there is someone who likes the revlimiter:D
:)
Do you still own it and you would you sell it?
dream bike but what would something like this cost? (without the yz 85 engine)
Bas Manders around €800
looks way more expensive
In that condition like 1200€
exellent project! good sound!
Nice one :O
Obrigodo
got aprilla rxs 50cc engine swap nsr 125cc 180cc kit on should be mental when finished
Nice video, where did you purchase the Excel rims,discs and hubs?
in Portugal
@@BARacing in a shop or online?
yz 85 engine 1/1 goes in am6 in place? :)
Holly shit, best thing i have seen :D
Man i was like "dammmmm looks sick" until i saw that ugly ass exhausts
where did you buy the plastics
how did you match the speedometer with the usd and 320mm brake disk?
yes
where have you got the big bore kit from cause i want one for my kx85
this athena kit
a link would be nics if it makes no circumstances cause im looking no for a about 3hours and cant find it
ciao bella moto ma dove hai preso i cerchioni
ganda bagaço Zé sim senhor sempre em alltas
Did you have to shave the cases
no
where did you buy the decals from?
Sim senhor. Ta ai uma coisa muito engraçada. Muito dinheiro ai investido tambem 😸😸
where did you bought plastic kit?
original in yamaha ;)
From which brand was the first light mask on the bike?
in stock bike ?
this thread is pure gold
thank you
Isso anda bem mas também parece ser muito segura
Bom Video ;)
That things a monster
She’s looking so nice😍
How did you remove the seat??
Boas, eu também tenho uma DT50X e ja ando a procurar plásticos desse tipo há muito tempo, sabem-me dizer onde os arranjaram? Obrigado
comprei novos na yamaha , se precisares fala no face que posso te arranjar novos
Did you have to modify the frame?!?!?!
to fit engine
Were did you get the seat cover
what is the top speed and how big is the fuel tank and his consumption?
Want to know too
jurcek 000 i bet that the top speed is 150-180 kmh and the fuel tank should be 6-7 L
and fuel consumption
jurcek 000 probably between 8-15l per 100km and top speed i guess between 120-150 km/h
its has a tank of 6.5L I dont know his consuptions but I have to refuel every week, I have a 80cc he probably spends more
What wheels are those and what hub are thouse
Where did you get the plastics kit from?
im wondering the same and the rims to let me know if youve found it
Didnt find any plastics. Well there was an option for 150$ but that was too much for me because I would only need 2 plastics not everything, just ask someone from motorcycle parts shop near you
@@adomasstudio7705 i live in iceland and i work at a motorcycle shop and no plastics here can u link 150 ones
at the place where i asked, they said they would need to import it from other country of course, they didnt give me a link or anything, cause i would just buy directly from them then :D try to contact other scooter parts shops
@@adomasstudio7705 ok thx tho
music should be turned off while driving. want to hear that 125 sound
very impressed!
Nice :D more videos :3
The engine it fits exactly or you made mods to chassis
Boas em custos quanto é q deve ser pra fazer um projecto assim .
Tava a pensar em comprar uma e mandar fazer
boas manda pm pois este projecto possivelmente esta a venda
@@BARacing para o instagram do BARacing?
@@diogoascensao7670 manda para onde perferires
@@diogoascensao7670 facebook intragram
Does the lights work if so how did you do it
use a batery
@@BARacing how long did it last
how much did you buy it for?
I wish my dt had that much torque😂
put a yz engine
BARacing how i can buy one cant find one :(
You cant find a YZ engine? Or the parts?
@@BARacing is it difficult
Impressionnant
Incroyable combien de hp ?
arround 32 cv
@@BARacing to engine or wheel?
mais videos.!! da laranjinha dt lc tambem.. Essa sim
How fast it go?
Where is this bike at?
awesome! :))
Mikä tässä on ku kaikki moottorijarruttelee 2 tahdeilla
Ei osaa ajaa
Is that rear sprocket from yz??
nop yz from yamaha tz 125 but i adapt in the hub
Have you sold it yet?
I definitly need a project bike
nice
Whats wrong with old rims