kalau didukung dengan alat yang lengkap & memadai pasti akan punya pikiran inisiatif & kreatif Di tambah ada modal untuk pembelian material 😃 Mks atas informasi nya sangar bermanfaat buat saya
Great idea, No 1. If I would modify it, I'd use a section of angle for the top clamp. More rigid than the plate, which deforms under pressure. But definitely inventive, and a great idea for later. Thanks for posting.
He lives where he cannot buy these tools or hasn't the money to buy them so he shows how to make tools from broken tools or scrap metal for little or no cost. Thank you.
)) а ведь бывает так что электрод намертво залипнет , ну там вовремя его под угол не согнул и вот он начинает раскаяться , и допустим ты в трудно доступном месте на лестнице , и до кнопки ВЫКЛ не достать )))) думаю что прищепка всеже удобней , и с ней быстрее сменить электрод
Always fast forward to the end of these type videos, and determine what's been made---how it works and what it does. If you don't like your little preview, don't waste any more time.
I'm glad I live where $1.99 still allows me to buy a 12 to 16 inch clamp. P.S. Thanks for adding the music. It reminds me to never click this again. LoL But good luck,and a great 2020 to you all the same. Greetings from E. Tennessee U.S.A.
the genius is in the making not the end product ...... i'm sure he knows he can buy all that stuff(he already has some of it) . the effort and design is the great part of it
Lol 5-10 dollars you said but imagine yourself stuck in a country were you gotta think amd make your own tools, and your the villages hero with a simple tool.......who is the idiot now? Shut the hell up and open your mind and let people be creative
@@e2910 you're so fucking dumb dude. Naive AF. Sure he's got all these specialized tools, taps, cutters, power tools, but can't get a $5 clamp. Really dumb fuck. Fucking dumbass.
A C clamp, A Bench vice and A Welder ! You are aware that you can purchase all these tools (even cheap ones at Harbor Freight) in less than 2 minutes of the 10 you just waisted of my life I'll never be able to get back! Thanks!
in a third world country; it is often necessary to make the tools that you need; in the US ; all sorts of cheap tools are available which are often the product of a third world country. The average American however has trouble operating a can opened
Woww the amazing idea 😍😍😍
Thank you
@@MrToolJunction you're welcome
kalau didukung dengan alat yang lengkap & memadai pasti akan punya pikiran inisiatif & kreatif
Di tambah ada modal untuk pembelian material 😃
Mks atas informasi nya sangar bermanfaat buat saya
mình không biết nói gì hon bạn Là người đã từng có kinh nghiệm và sáng tạo mới thật sự là trên cả tuyệt vời chúc bạn thành công có nhiều sáng kiến hay
Great idea, No 1.
If I would modify it, I'd use a section of angle for the top clamp.
More rigid than the plate, which deforms under pressure.
But definitely inventive, and a great idea for later.
Thanks for posting.
Мне очень нравится картина человек под дождём. Молодец красавица!
Que bárbaro es admirable su habilidad le felicito quice ver el tutorial por curiosidad, que bonito ver que disfruta el don que Dios le dio.
What GENIUS ideas exactly?!
You just wasted people time apart from yours
🤣🤣
I always learn something when I watch a video like this. In this case it is to not click on anything from Mr Tool Junction ever again.
Sencillamente genial. Muchas gracias y un cordial saludo desde Argentina.
He lives where he cannot buy these tools or hasn't the money to buy them so he shows how to make tools from broken tools or scrap metal for little or no cost. Thank you.
Hola buen imbento gracias por enseñarme sus abilidades.
Bahut bdhiya good luck 3
Excelente idea muy útiles...gracias
I normally don't comment on videos that I haven't watched, but 30 seconds in and I just can't take the music.
I'm sure it's royalty-free music. You get what you don't pay for.
@@senorashish no music= best experience
people like you led the industrial revolution in this country. damn good work and ideas
I like the tool for bending metal! Great idea and something i can use in mu shop too! Thanks for the inspiration!
Thanks bro
@@MrToolJunction rrytygccvg56890
@@MrToolJunction ddr6
@@MrToolJunction ttt44trgpp
Bhai kosi company k drill bit use kar rahe ho link bhej do
Very good
Excelente thanks a lot for sharing.
Awsome!!! The comments had me laughing my arse off. !!! Glad I came !!
Hey mister tool junction, ya know a skilsaw works way better than a drill. You could have just mounted it upside down.
)) а ведь бывает так что электрод намертво залипнет , ну там вовремя его под угол не согнул и вот он начинает раскаяться , и допустим ты в трудно доступном месте на лестнице , и до кнопки ВЫКЛ не достать )))) думаю что прищепка всеже удобней , и с ней быстрее сменить электрод
Very nice idea
Waw so nice video
6 hours and $70 worth of metal and parts later.... Viola! A clamp that I could have purchased cheaper and with far less effort.
Amilatiwanka
What the hell was made and for whatever purpose was it made for?
paul P thank u!!
Not the thing in the thumbnail. I really wanted to know what that was for and if you could just use a t-strap hinge to accomplish the same goal.
I think using “genius” in the title is being a bit generous? Maybe , “useful inventions”
For genius inventions please reference Nikola Tesla!
he should have used the words cool or clever...genius was kind of click bait tee...
First show what is the end product and later show how to make that. Viewers can decide whether to watch entire crap or quit in between.
Always fast forward to the end of these type videos, and determine what's been made---how it works and what it does. If you don't like your little preview, don't waste any more time.
Yes.. i many parts of the world you can't just drive to buy these type of tools very cheap at you local harborfreight store..good job man!
Grandes consejos y enseñanzas!!
Super.
I'm glad I live where $1.99 still allows me to buy a 12 to 16 inch clamp.
P.S. Thanks for adding the music. It reminds me to never click this again. LoL
But good luck,and a great 2020 to you all the same.
Greetings from E. Tennessee U.S.A.
Ya, a 2 buck clamp for a one time use. Wally World special. Don't forget time ,gas,socializing and coffee both ways on ride cost like hell
I like it! Scraps laying around shop...why not make it...
Le creazioni servono a poco ma; la tua bravura nel realizzarle è fenomenale. Bravo😉
Very good ideas
5:53 what form of welding is that?
All are good ...waldin holder is so good
Good info..
Thanks
the genius is in the making not the end product ...... i'm sure he knows he can buy all that stuff(he already has some of it) . the effort and design is the great part of it
Exactly!! he's not claiming to have invented the wheel; but the Debby Downers can't leave it alone
Merci pour cette vidéo des idées génial bon courage ,merci encore
En el primero puedes usar bloqueadores de bicleta y te evitas estar apretando tornillos
This isn’t a half bad idea ! Very Cleaver !
Bien video
Cool shorts man
Great we all have all that tools at home
Its really genius to buy £2000 worth of power tools to make a £2 G-Clamp.
He i am englandanian pleas you make a plass
People just playing around with lots of their expensive tools. It's just for fun, they do not think about money.
⁶
@@kietnguyen9884 what 6?
you know could save a ton of time by buying the premade stuff right?
Not bad - really like the homemade box/pan brake and homemade clamp cool too. Good job
Eyemalmostthere...YOU ARE AN IDIOT.
WoW, outstanding! Very creative and useful stuff.
Loved the first idea.
Super
Genial, gracias por compartir. Saludos desde Cali, Colombia.
FELICIDADES por este video y por hacernos participes de tus conocimientos, Thank you
ÓTIMO , PARABÉNS ! BRASIL
OH WOW that was absolutely a GENIUS way to waste time!
amazed how much scrap material this guys has among all the expensive tools he owns..
Вместо гайки,барашек , чтоб гаечный ключик неиспользовать
Wonderful last one ya
Genius is not a word I would use for this
Upside down genius?
1st one was kinda cool.
2nd was ALOT of work for a $5-10 clamp.
3rd was just dangerous.
Lol 5-10 dollars you said but imagine yourself stuck in a country were you gotta think amd make your own tools, and your the villages hero with a simple tool.......who is the idiot now? Shut the hell up and open your mind and let people be creative
Elias Lara where did he get the tap set and all the power tools dummy?!
@@apllDgrapllD lmao
@@e2910 you're so fucking dumb dude. Naive AF. Sure he's got all these specialized tools, taps, cutters, power tools, but can't get a $5 clamp. Really dumb fuck. Fucking dumbass.
Good idea
Ótimo trabalho
Ótimo vídeo
Que Deus te ilumine sempre
What was the power source for the welder at the end?,I noticed you didn't have it earthed.
Top top top.. 👍🏼
Could watch this all-day long
Guessing there's no hardware store where this guy lives - but interesting video though , except #3 , danger level went straight up !
Good very नाइस video
I know, I know. I'm the one that clicked and then proceeded to watch the whole thing. I'm still angry though.
Interesting but maybe skip the video of the actual welding?
The only genius thing here is the guy who watched 30 seconds and bailed on this video.
very nice
Verry nicety.frome.Thailand
Buen ingenio!
Great
Thank you bro
Super boss
Wwaaaaw amazing idea thank you I will try in my channel
Thanks bro
Where are you from
@@TECHNICIANMEDIA Same place you are from...IDIOT LAND.
Thanks RUclips algorithm... (what am I doing wrong?)
Somebody owes me 10 minutes of my life back please
Ned Read you wasted your time as there is a red dot on my video that I just slide along and stop at the good bits.
Wow, your in debt.
Super brother
Thank u
Drill check hack is really super
Wow what great ideas . Those tools didn't exist before. Wait I think they did.
not bad, but also not genius. may be useful for many peoples / worker where labour making hand made product
A C clamp, A Bench vice and A Welder ! You are aware that you can purchase all these tools (even cheap ones at Harbor Freight) in less than 2 minutes of the 10 you just waisted of my life I'll never be able to get back! Thanks!
Nice
Genius 👍👍👍👍👍👍👍
Instead of playing useless music, why don't you explain what you are doing?
Great Ideas
If he can weld why is the first one such a pain ? Weld that stuff together.
Give him a brake he made his tool and that is cool
Well if you want to alter it later screws are easier to modify. Narrow limit to that style
Please use cutting oil when you tap threads in steel..and washers under nuts !!!
Caniella
Love it, or P350 for a proper vice clamp on Lazada. Good stuff though.
When are going to show the 3 genus genius ideas ?
I like the third one
I want my 10 minutes and 17 seconds back... What a waste of time...
Super bro
👍👍👍
Acchi karigari aapki hai
Dhanyawad bhai
What an amazing waste of time! 🤦♂️
I think you mean "genius" waste of time.
I dont think so he is making money 5m views bro
in a third world country; it is often necessary to make the tools that you need;
in the US ; all sorts of cheap tools are available which are often the product of a third world country.
The average American however has trouble operating a can opened
The average American has trouble electing a decent head of state so that's to be expected
Zaberdast
Thanks bro