Hi I have a RCD330 system Are you able to guide me to which reverse camera I should buy that will actually work onto the screen? I had someone try to install a cheap eBay one and don’t think it was the right one
Thanks for the prompt reply Hopefully this works Appreciate the advice, the adaptor I already have as it came with the system Hopefully nothing else is needed
I have a retention box for rear cam installed to my android stereo it works great :) but i want rcd stereo to have factory original cam to work anyone have a working guide.? Cherrs
Yes bro. Is this an adapter for the rgb 26 pin connector? My tiguan has rns 510 that can't be updated and has rgb 26 pin connector for reverse camera and I think you have answered my prayers with this video bro please let me know 🙏
@@MrWaheedulHaque thank you, so for the hesdunit upgrades I'm looking at that say for av camera not rgb.. by fitting this adapter I can get round that issue?
Thank you for this video. Currently trying to source the Connects2 adaptor as the Chinese ones are fake and do not work. Has anyone had any luck with getting it off of Connects2?
Yeah connects2 much better try find out of stock listing get part number and ring them up with that part number they might be able to source it for you
@@MrWaheedulHaque Okay, but you mentioned at the end of your video that you would be using the Chinese adaptor again and wiring it up through the car, will that work if you wire it up not the lazy way with the Chinese adaptor?
@@mitchellhaid7779 lazy way with chinese adaptor works, but i found out of 6 i got only 1 actually worked, and cos of the lazy wiring it broke the adaptor system or burnt it out, i put connects2 one in after that it been running fine ever since but i did do the wiring properly for that one
@@larsk7708 yes connects2 one worked very well and still worked well till my dad jumpstarted the car wrong way and blew the parking module up 😭😭😭😂, but yeah without that happening the connects2 one works really well, the chinese ones not so good
@@MrWaheedulHaque Then why did you open the trunk trim? Shoudn't it work just fine with the decoder, the RCD330 unit and the AV camera adapter? Also, It's almost a year since you installed the OEM. How is the experience overall? Is it worth it? And have you faced any issues with the system? Thanks brother!
@@afsalmutawa i did it the easy way the first time without wiring to back and it broke within few days, the only proper way to do it is to run a wire from the front of car stereo to the reverse light so that the box is only active when the car is in reverse. This way it stops it always running 24/7 which this isnt made to do. If you do it the easy way where you wire the power and video cable together it will work fine but for how long probably not very long maybe few days as it wasn't designed to have constant power to the video line. I hope you understand what im saying. Since doing it properly never had issue again, and make sure to buy a connects2 one as the chinese ones half of them were fake, and others were faulty, my best luck was with the british brand connects2
@@MrWaheedulHaque I see. That's strange. What is the function of the decoder then? Does it not only show the feed form the camera when you put it in reverse? And where exactly do you connect the wires that come out of the decoder? Thanks for replying, really appreciate it!
@@afsalmutawa decoder converts the signal from low line old camera tech to new line new camera tech which the rcd 330 uses. Thats the only purpose of the decoder but without it wont work as camera uses a different type of camera signal, and for the wiring everything is in depth on the video brother, just watch the video everything is there even a wiring diagram which i go in detail on
Hi I have a RCD330 system
Are you able to guide me to which reverse camera I should buy that will actually work onto the screen?
I had someone try to install a cheap eBay one and don’t think it was the right one
Try this amzn.to/45bX1ea
You might also need a av adaptor cable
amzn.to/3KuoQom
Thanks for the prompt reply
Hopefully this works
Appreciate the advice, the adaptor I already have as it came with the system
Hopefully nothing else is needed
@@ia3227 no worries bro let me know once you install it if it works
@@MrWaheedulHaque just an update bro
The camera has been fitted and is working
Massive thank you for the recommendation
@@ia3227 No worries my bro, please help me out by subscribing to my channel
I have a retention box for rear cam installed to my android stereo it works great :) but i want rcd stereo to have factory original cam to work anyone have a working guide.? Cherrs
@@larsk7708 very nice
@@MrWaheedulHaquedo you have the guide how you manage to get it to working with rcd330 etc :)
@@MrWaheedulHaque ? Please answer :)
Do you have a link for the camera adapter?
In description
hey bro please put a link to the adapter used in the video
www.caraudiocentre.co.uk/product_m-connects2-cam-vw2-rt_p-33395.htm
This is the working adaptor but like i said its sold out everywhere
@@MrWaheedulHaque hello , any chance to still find this adapter plz
@@gilbertnajem8410 just contact the company connects2 see what they say
Hi bro. Do you have a link for the adapter?
Very hard to find the good one search connects2 rcd 330 and have a look what you find
Yes bro. Is this an adapter for the rgb 26 pin connector? My tiguan has rns 510 that can't be updated and has rgb 26 pin connector for reverse camera and I think you have answered my prayers with this video bro please let me know 🙏
Yes it is, it is a RGB to AV
@@MrWaheedulHaque thank you, so for the hesdunit upgrades I'm looking at that say for av camera not rgb.. by fitting this adapter I can get round that issue?
@@dmason010 yes but you need to find a good adaptor as most are fake and do nothing
OK bro thank you
Thank you for this video. Currently trying to source the Connects2 adaptor as the Chinese ones are fake and do not work.
Has anyone had any luck with getting it off of Connects2?
Yeah connects2 much better try find out of stock listing get part number and ring them up with that part number they might be able to source it for you
@@MrWaheedulHaque Okay, but you mentioned at the end of your video that you would be using the Chinese adaptor again and wiring it up through the car, will that work if you wire it up not the lazy way with the Chinese adaptor?
@@mitchellhaid7779 lazy way with chinese adaptor works, but i found out of 6 i got only 1 actually worked, and cos of the lazy wiring it broke the adaptor system or burnt it out, i put connects2 one in after that it been running fine ever since but i did do the wiring properly for that one
@@MrWaheedulHaque what is the type of wire gauge you use? 20?
@@mitchellhaid7779 yeah i think either 16 or 20
Did it finally work? Can you help me ?
Yes worked like i said but the box kept burning out so if u doing it buy thr connects2 one not chinese
@@MrWaheedulHaqueyou gaved up did it worked with the cam on the screen ?
@@larsk7708 yes connects2 one worked very well and still worked well till my dad jumpstarted the car wrong way and blew the parking module up 😭😭😭😂, but yeah without that happening the connects2 one works really well, the chinese ones not so good
@@MrWaheedulHaque you dont needed to be back in car with wiring right now did you manage to get the rvc on the display then ?
Is your rear camera original or after market? I mean why did you need to work in the back of the car?
This is original camera from vw oem
@@MrWaheedulHaque Then why did you open the trunk trim? Shoudn't it work just fine with the decoder, the RCD330 unit and the AV camera adapter?
Also, It's almost a year since you installed the OEM. How is the experience overall? Is it worth it? And have you faced any issues with the system?
Thanks brother!
@@afsalmutawa i did it the easy way the first time without wiring to back and it broke within few days, the only proper way to do it is to run a wire from the front of car stereo to the reverse light so that the box is only active when the car is in reverse. This way it stops it always running 24/7 which this isnt made to do. If you do it the easy way where you wire the power and video cable together it will work fine but for how long probably not very long maybe few days as it wasn't designed to have constant power to the video line. I hope you understand what im saying. Since doing it properly never had issue again, and make sure to buy a connects2 one as the chinese ones half of them were fake, and others were faulty, my best luck was with the british brand connects2
@@MrWaheedulHaque I see. That's strange. What is the function of the decoder then? Does it not only show the feed form the camera when you put it in reverse? And where exactly do you connect the wires that come out of the decoder? Thanks for replying, really appreciate it!
@@afsalmutawa decoder converts the signal from low line old camera tech to new line new camera tech which the rcd 330 uses. Thats the only purpose of the decoder but without it wont work as camera uses a different type of camera signal, and for the wiring everything is in depth on the video brother, just watch the video everything is there even a wiring diagram which i go in detail on