Sometimes all we need is a clue. U saved my printer as I was able to repair my printer myself. I don't have words to express my gratitude. May God help increase your knowledge day by day
दादा बहुत शुक्रिया मेरे प्रिंटर का ऐसा प्रोबलम हुआ था तो वो लॉजिक बोर्ड लेने में गया उसकी कीमत २५०० बताई फिर एक प्रिंटर के दुकान में गया उसने १६०० बोला लेकिन सेकंड हैंड आखिर में मैंने मेरे प्रिंटर का लॉजिक बोर्ड निकाला एक मोबाइल रिपेयर वाले के पास गया आपका वीडियो दिखाया उसने जंप मारकर दिया और २० रुपए लिए प्रिंटर चालू हुआ thank you
Resp Sir! Nice vedio Sir. Dhanyavaadh Sir. MF244DW Printer Power Suply Board Succesfully Repaired Sir. DC 2.4V OK Good Sir but Not Turn on Sir. In the Logic Board SMD 5 Capacitors Beep Sound with Multimeter with Same Values Sir. A Small Diode was also Beep Sound Sir. Small Value Beepsound Capacitor How to Remove Sir. 5 also Same Value Beepsound Sir Which the Remove Sir. Please Advise Sir. with Ur Help all Vedios Sir. -- ChinnaRao Paderu Andhrapradesh
hi friend there is problem with canon mf3010 usb problem every components between chip and the usb socket are ok but no usb is detected when connected to pc can u help?
Hello, I have a problem with HP 1020.May I ask, if the computer does not see the printer by USB cable, does it point to the problem with formatter card? I tried two different USB cables and it seems the problem lies elsewhere( i.e in formatter board). By checking the card I saw one leg of the USB port became detached(bad soldering), I re soldered the big leg, but still the computer does not see the printer. May I ask what to check on the card? Can we check the output voltage on USB port?
If the USB port looks correct, then re-solder all pin. If looks damage usb port replace it. Still if the problem is not fixed then check the component on the track.
@@Technicalbaba01 I have checked the USB port by connecting the USB cable and checking continuity of 4 pins on the USB side and the port. The cable is all right and all 4 pins of USB port on the formatter look fine. Two big ones on the sides are ground as I see. They also have good continuity to ground.I have checked resistors on the board, their tracks are 33 Om each which is correct as I know. There was some other video in the internet for checking the short of the formatter.But i did not understand the circuit wiring and the way to test it. From Your experience, is the length of the USB cable of the great importance? I know it has to be USB 2.0 cable, but I have this sort of cable of 3 meters long. I was advised it should be no more than 1 m. Could it be the problem of printer not seen by computer? Thank You.
@@goutamdeb1047 cable ta ke change kore dekhecho .r printer driver notun download kore dakho Tao jodi n hoy ta hole printer open kore dakho usb socket loose hote pare .
Sir first of all you can change data cable,and you can plug another USB Port and you can check printer driver and usb driver properly working are not, after you can try to repair your printer logic card.
Sabka card lagbhag same rahta hai hai 2 MOSFET se ragister se diode se hote huye ic me jata hai check kariye aksar inhi me fault hota hai ,agar socket try sold nahi huwa ho to.
@@maheshlohar6083 MOSFET 3 pin ka hota hai agar 2 MOSFET ka combination hoga to 6 pin ka hoga ragister hoga use thik se dekho or jo bhi hai use market me mile to thik hai nahi us par likha huwa number ko Google par search karke uska datasheet nikalo or fir dusra kharab circuit me khojo same value ka MOSFET or laga do.ho jayga.
Red light blinkin means error, now you have to see what is causing the paper is correct, cartridge is correct or paper jam or door open check all is correct or not
Jha solding kar rahe ho uske bagal me ek 3pin ki ek IC lagi hui hoti hai wo tumhare board me nikla hua hai......next supply kha se aage jayega....ullu bna rha hai
Sometimes all we need is a clue. U saved my printer as I was able to repair my printer myself. I don't have words to express my gratitude. May God help increase your knowledge day by day
Thankyou very much dear friends.
P1108 same issue i think this is very cheap and impressive soltion for all thanks sujeet
lo felicito gracias por la enceñanza un abrazo de venezuela
Thanks sir! I did it just like you did! model M401a. Thank you
दादा बहुत शुक्रिया मेरे प्रिंटर का ऐसा प्रोबलम हुआ था तो वो लॉजिक बोर्ड लेने में गया उसकी कीमत २५०० बताई फिर एक प्रिंटर के दुकान में गया उसने १६०० बोला लेकिन सेकंड हैंड आखिर में मैंने मेरे प्रिंटर का लॉजिक बोर्ड निकाला एक मोबाइल रिपेयर वाले के पास गया आपका वीडियो दिखाया उसने जंप मारकर दिया और २० रुपए लिए प्रिंटर चालू हुआ thank you
Welcome brother. Or mere channel ko support and pramotion karo apne dosto me share karo.it field knowledge ke liye.
Same problem in canon image classic MF3010
Well done bro ❤🎉
Very Nice Technically guide Brother..
Nice work sir g
Hp 1005 mai same issue hai sir kaise slve kare plz make a video
Agar usb me sub tang bip aavaj de rahi hai to isb badli karna padega kya?
Mera Kyocera taskalfa 1800 ka connection ka issu he khch help hoga kya
Very good dost
very usefull thank you
Resp Sir! Nice vedio Sir. Dhanyavaadh Sir. MF244DW Printer Power Suply Board Succesfully Repaired Sir. DC 2.4V OK Good Sir but Not Turn on Sir. In the Logic Board SMD 5 Capacitors Beep Sound with Multimeter with Same Values Sir. A Small Diode was also Beep Sound Sir. Small Value Beepsound Capacitor How to Remove Sir. 5 also Same Value Beepsound Sir Which the Remove Sir. Please Advise Sir. with Ur Help all Vedios Sir. -- ChinnaRao Paderu Andhrapradesh
Love you sir
hi friend
there is problem with canon mf3010 usb problem every components between chip and the usb socket are ok but no usb is detected when connected to pc
can u help?
@@crdleoffiilth00 you can check 2 MOSFET and ragister if both are ok then ic fault.
@ for renewing my own memory those are double zener 3 pin sot23 ,am I supposed to replace the chip?
@@crdleoffiilth00 If all good it's means fault not found out then last option replace the new card .
Hello, I have a problem with HP 1020.May I ask, if the computer does not see the printer by USB cable, does it point to the problem with formatter card? I tried two different USB cables and it seems the problem lies elsewhere( i.e in formatter board). By checking the card I saw one leg of the USB port became detached(bad soldering), I re soldered the big leg, but still the computer does not see the printer. May I ask what to check on the card? Can we check the output voltage on USB port?
If the USB port looks correct, then re-solder all pin. If looks damage usb port replace it. Still if the problem is not fixed then check the component on the track.
@@Technicalbaba01 Hello, Thank You for a prompt reply. May I send You the pictures of my formatter board by email? Thank You.
@@Technicalbaba01 I have checked the USB port by connecting the USB cable and checking continuity of 4 pins on the USB side and the port. The cable is all right and all 4 pins of USB port on the formatter look fine. Two big ones on the sides are ground as I see. They also have good continuity to ground.I have checked resistors on the board, their tracks are 33 Om each which is correct as I know. There was some other video in the internet for checking the short of the formatter.But i did not understand the circuit wiring and the way to test it. From Your experience, is the length of the USB cable of the great importance? I know it has to be USB 2.0 cable, but I have this sort of cable of 3 meters long. I was advised it should be no more than 1 m. Could it be the problem of printer not seen by computer? Thank You.
@@akdiscreto Take to repair center.
Dada namaskar amar ekta hp p1007 not recognize show karche ki karo dada
Data cable change Kore dekho.
@@Technicalbaba01 karlam to other pc te check korlam kinto same dada
@@goutamdeb1047 cable ta ke change kore dekhecho .r printer driver notun download kore dakho Tao jodi n hoy ta hole printer open kore dakho usb socket loose hote pare .
Cable change karchi kinto same
@@goutamdeb1047 usb driver and printer driver dobara dalo
is card ko kya kehte hein aur ye kitne ka hai
SUJEETT EPSON M2OO SHOWING SAME USB PROBLEM CAN YOU GIVE ITS SOLUTION.
Sir first of all you can change data cable,and you can plug another USB Port and you can check printer driver and usb driver properly working are not, after you can try to repair your printer logic card.
Hp1020 plus me kaise sahi kare same usb problem ,usb not recognize
@@sunilkumarsingh4129 first troubleshoot cable change karo and printer driver dobara dalo.
CTS arca ls 150 usb not detect Any solution pls provide
Hp 2015 formater repairing plz
HP 2015 formatter is not yet repairing.
32ohms k pkgs or 10ohms k pkg chk karo or main i.c flow karo bs itna he hota ha us me
@@saniasnari video banao
thank for this idia
Without mosfate work kaise kar raha hay
Bhai Hp500 m551 bahut problem aaa Raha hai plz is par banao
SIR HP 1005MFP WALE PRINTER KA KOI SOLUTION WO USB SOCKET READY HAI PR USB DETECT NAHI HO RAHA HAI
Sabka card lagbhag same rahta hai hai 2 MOSFET se ragister se diode se hote huye ic me jata hai check kariye aksar inhi me fault hota hai ,agar socket try sold nahi huwa ho to.
@@Technicalbaba01 sir us mosfet ko kaise banayenge koi solution usme 4 tang hai
@@maheshlohar6083 MOSFET 3 pin ka hota hai agar 2 MOSFET ka combination hoga to 6 pin ka hoga ragister hoga use thik se dekho or jo bhi hai use market me mile to thik hai nahi us par likha huwa number ko Google par search karke uska datasheet nikalo or fir dusra kharab circuit me khojo same value ka MOSFET or laga do.ho jayga.
SAMSUNG ML1666 TWO RED LIGHT AND PC NOT DEDECTING AND NO RESPONS PRINTER. PLEASE HELP
Red light blinkin means error, now you have to see what is causing the paper is correct, cartridge is correct or paper jam or door open check all is correct or not
obrigado vc me ajudoubmuito
HP 1005 USB slot Kamna Karta solution batao
Mera Epson L380 ka head clean kiya, ink set kiya, F1 direct kiya fir bhi print nahi aa raha hai, blank print aa raha hai
please help.....sujeet bro
Print blank kaise ayga kuch chap raha hoga thoda Moda adha adhura kuch bhi ekdum blank to nahi hona chahiye
@@Technicalbaba01 BHAI JI EK DAM BLANK AA RAHA HAI.....PL. HELP AND ADVISE ME
@@SR_Ghumakkad_Team head cable ko ek bar check karo ok hai ki nahi jab sab kar liya to akhri option head replace hi karna hoga bro.
Hp1018 ka btay
Bhai hp 2055 printer ko kisi bhi system ya laptop aya connect karo tu USB devoice not recognize ata hai
usb port chk karo ya ohms pkg card k back side me udnr ka masla isi se ata ha
Sir HP LASERJET P1007 KA CARD HAI AAPKE PAS
Спасибо!!!!!😎
Muze printer repair ka course karna hai
Its not compatible with Mac OS Catalina version ( 10.15.7 )
Tq
hello
Ksy hen bhi mjy kam sekhna hy kindly koi contact ho apka
👍
सिम प्रॉब्लम
recoh 3510
sir
Hp 126nw usb not working?
Usb cable check and usb driver check first . after checking logic Card.
@@Technicalbaba01 network se or wifi se print ho raha hai what usb se nahi usb socket and cable ok hai
@@Bhardwaj-Enterprises USB driver dobara dal ke dekhe hai and cable change karke dekhe hai uske bad logic Card ko open karke dekho.
Jha solding kar rahe ho uske bagal me ek 3pin ki ek IC lagi hui hoti hai wo tumhare board me nikla hua hai......next supply kha se aage jayega....ullu bna rha hai
video ko pura dekhiye adhe adhura n dekhe.