hello I try to repair my iphone, I change the battery charge connector and the screen it still does not turn on. yet I tested the motherboard that is loaded. you think it can be what?
THIS IS SILLY BUT IT WORKS My iPhone 6s Plus wouldn't charge and it was completely dead. I tried different a charger, different cord, plugged it into 2 different USB ports, and tried the adapter into 2 different wall sockets. Nothing worked. I know this sounds silly, but try this 1st before anything else...simply put the part of the changer cord that plugs into your iPhone into your mouth or lick it on both sides, plug it back into your iPhone. It should start charging again. Worked for me like a charm. I had a friend who told me to try this. Talk about saving money & time! Hope it works for you.
Good evening , I have a few questions . What is Dongle and where can I get it ? How did you know that the problem simply wasn' t about the spoilt charging port ? And finally is this fix reported to work on 6 plus as well ?
Please submit the order directly at our website www.rewatechnology.com, and our sales will contact you for the prices and details soon. Any questions and demands please feel free to contact us at: sales@rewatechnology.com
Whats the name of the paste that REWA used to keep the replacement IC in place on the board while blowing. Doing the repair without that paste is hard because the heat gun blows the IC off the board almost straight away :(
Benjamin Hong Tristar handles USB negotiations. So it detects and authorizes lighting cable accessories. Tigris, the chip beside it, it's the charging chip. Cables plugged in. Tristar authenticates it as a "charger". It then signals Tigris to begin charging the battery.
Ok so my iPhone 6plus wont turn on at all. I checked the voltage through the FPC connector like you did here and it reads 3.5. This means that the logic board can charge correct? If so, why isn't my phone powering up? I've tried different batteries to see if the battery was the issue but I get the same problem. Besides my batteries voltage are 3.0-3.5 so that isn't the problem.
Try to check the boot current to see if it is normal, then restore the phone and check if there is error code. There are many reasons may cause the malfunction that the phone can't power up. More information is required to confirm the fault.
How about my iphone 6+ issue.. 1. Mute is not working properly the switch on the side is not working and while using the mute goes on and off everytime. 2. The power button stops working like when i press it nothing happen, no sleep no turn off but while im using turn off display pops up like the mute problem. Lastly, its not charging... when i plug the charger "accy not compatible" pops up so i have to turn off the phone to make it charging even w/o charging indicator on the display. Now my phone is dead and when i brought it to the repair shop w/o opening the phone they said its an Ic chip problem. So, what do you think? Please i need honest opinion. Thanks!
I have an iPhone 6 that was not charging after water damage. Phone could boot with a good battery but could not charge. I tried to replace u2 ic and rehot u1401 ic and now phone is completely dead, iTunes does not recognize it. I try to measure the volts of the capacitors near this chips and no volts, no sigh of life!! What i did wrong? Can you fix this if i send you the phone? What's the possibility to repair this? Thank you
You mean the battery or the motherboard? If it the connector on the battery, it would be battery self-protection. If it is the battery connector on the motherboard, it would be something wrong with your charging circuit.
Thanks for your reply. I bought a new dock connector and replaced the faulty one, and it seemed to fix the issue. I meant the the connector at the motherboard.
Hey Mr. I have the same problem. my I phone 6 not charging. I tested the voltage battery like you 2.58v and the voltage between the connector and sim card it's 2.58v What is the problem??
I would start by plugging it into a computer with iTunes to see if the phone is detected. If it is, the phone may simply be in DFU mode. Restore then retest. Still not working? I would change TriStar. It's such a common point of failure, I simply replace it as a troubleshooting measure. Then retest. Still not charging, inspect and replece Tigris. Then retest. Still not charging? Check your gas guage lines. They extremely unlikely for a no power repair. Because,even with those lines damaged, the phone will still power on, although the battery percentage will never change. If none of those solve the problem,then you need to start the more advanced troubleshooting, which is check the data lines.
@@hatemboussba4180 The location of the heat can be telling. Is it front or back? Top or bottom? Of the heat is at or near the chip that was changed , it is more likely the chip's orientation is not correct (check the dot on the chip versus the orientation on the schematic), or the chip is not seated correctly so the balls may be bridged together, or components in the surrounding area have been moved. I'd start near the replaced chip then spread out.
Dear Rewa Team... my iPhone 6 if i use AC adapter it won't charging, but when i using Power Bank it works until my battery is full.... any ideas what happened? thx
Am I able to send you a phone for you to see if you can fix it? I bought an iPhone 6 and changed the charging port then it just stopped charging period there was some work done to it by a local store and now I used the screen for another phone and the phone is just sitting there wondering if you wanna trouble shoot it and fix it I'll pay I don't mind?
Hi everyone, My iphone 6 has a charge problem. I have verified battery voltage=ok, mother board voltage connector=ok. I can charge it only if i connect mightening cable (lightening bolt flash then disappear)then switch the phone off. Thanks in advance
they just show you how to find the issue and fix it. Actually, as an experienced technician, he doesn't need to check the material on computer, but fix it straight away.
no way I can do that, have no tools, no clues and cleans stuffs, no skills at all, left me only crying and give you a thumbs up... I thought was only the battery. Changed and still drain.. still crying...
Enhance iPhone logic board repair skills with REWA Academy Online Courses ( Foundation, Handwork, Work Flow&Troubleshooting, etc.)
Check it now! > academy.rewa.tech
sir have a good day,,,,can i ask...where did you get that PADS LAYOUT on iphone pcb line connections
REWA you are always the best, the most easy understanding tutorial if i ever found on youtube's channel, that is REWA, one word "great"
Did exactly what the video says and it worked flawlessly. Thank you.
We appreciate your love for this job Rewa technology from Kampala Uganda ❤
Good work my iPhone 6 charging sucess👍😎🤩
how to repair iPhone 6 not Charging
1. learn Chinese
10 years later
2. buy new iphone 20
哈哈哈😄
silu zhang
HAHAHA....its not that hard, i repair them all the time, trust me its easier to fix iphone tristar, touch ic, etc... than it is to learn Chinese
hello I try to repair my iphone, I change the battery charge connector and the screen it still does not turn on.
yet I tested the motherboard that is loaded.
you think it can be what?
By charge connector you mean the actual battery, the charging port on your iPhone or the connector on your logic board.
Very helpful..video clearly & easy to understand..keep it up Rewa!!
These videos helping me more .. thx for uploading :)
0:37 plug dongle to computer. I will keep laughing about it for a long time
THIS IS SILLY BUT IT WORKS
My iPhone 6s Plus wouldn't charge and it
was completely dead. I tried different a charger, different cord, plugged it
into 2 different USB ports, and tried the adapter into 2 different wall
sockets. Nothing worked.
I know this sounds silly, but try this
1st before anything else...simply put the part of the changer cord that plugs
into your iPhone into your mouth or lick it on both sides, plug it back into
your iPhone. It should start charging again.
Worked for me like a charm. I had a friend
who told me to try this. Talk about saving money & time! Hope it works for
you.
Spent days trying everything to fix it and this actually worked, don't know whether to laugh or cry, thank you.
omg it actually worked!! thank you so much!
nevermind it doesnt work anymore
Good evening ,
I have a few questions . What is Dongle and where can I get it ? How did you know that the problem simply wasn' t about the spoilt charging port ? And finally is this fix reported to work on 6 plus as well ?
thanks
cool video !! keep going guys !
how would you diagnose an iPhone 6s to see if you need to replace the lcd screen or fix the logic board?
in your video you said to remove tin from the pad. Are you referring to the solder balls?
Yes, the solder balls.
I am a beginner and Could not catch it. So was it IC faulty eventually?
where can i download this dongle program ? with english translate
Download refox. No dongle needed. You will get schematic diagram, bitmap etc for all models
Hi, where do i have to put my multimeter pins on the battery it self and where do i have to put them for testing the charging IC?
Colin for testing battery just put both end on the battery pin. for charging ic put black on shield and red on the battery connect of pcb
Colin
Very useful video. keep it up guys....
Great video Guys!!👍🏻
Thanks.
can you make one of this video but using iphone 6s? mine sens to have that problem.
Hi, friend, how do you buy it on the site? Where are the product values?
Please submit the order directly at our website www.rewatechnology.com, and our sales will contact you for the prices and details soon.
Any questions and demands please feel free to contact us at: sales@rewatechnology.com
that looks easy! thanks
Hello, I have a reading on the multimeter 0,26V.Eto so the same problem with U1700 (tristar)?
What cleaner PCB are you use?
Really enjoyed, Thanks fully
Hello. Nice job. My Iphone 6 drains battery in 4-5 hour from 100% to 0%. Could it be the same chip? I have replaced battery.
where i can get that PCB diagram software?can give me the link,thanks
can you make a video on fault charging for iPad 4
We are keep doing this, pls stay focusing
great! Can you research how to replace the broken touch ID button with a new one that still receives fingerprints? thank you
what the name of dongle pcb,,,do you sell online
Whats the name of the paste that REWA used to keep the replacement IC in place on the board while blowing.
Doing the repair without that paste is hard because the heat gun blows the IC off the board almost straight away :(
They dont use paste.
You should not use a heatgun, but an hot air station, since a heatgun blows to much air.
What is the difference between the U2 Tristar IC and the power management IC? I'm not sure which one to replace.
Benjamin Hong Tristar handles USB negotiations. So it detects and authorizes lighting cable accessories. Tigris, the chip beside it, it's the charging chip.
Cables plugged in. Tristar authenticates it as a "charger". It then signals Tigris to begin charging the battery.
Good job and thanks
What software are you using there??
www.pads.com/downloads/pads-pcb-viewer/ But you wiil need the logic boards files. If you find them please tell me were.......
dongle with logic board file. software: Pads Layout
Merci, video tres interessante. Je debute et tout est nouveau donc beaucoup a apprendre.
What is the guest of this device programmer Is it possible to explain to me and thank you
Please tell me what's ur music name🙏
Ngurah Bayu billy bong surprise 2nd symphony
Thanks sir
what should be done next if changing u2 ic doesnt make d dead phone start again?
Sir where we find out sechamatic diagram just like in ur vedieo.
Ok so my iPhone 6plus wont turn on at all. I checked the voltage through the FPC connector like you did here and it reads 3.5. This means that the logic board can charge correct? If so, why isn't my phone powering up? I've tried different batteries to see if the battery was the issue but I get the same problem. Besides my batteries voltage are 3.0-3.5 so that isn't the problem.
Try to check the boot current to see if it is normal, then restore the phone and check if there is error code. There are many reasons may cause the malfunction that the phone can't power up. More information is required to confirm the fault.
obrigado pela aula
Nice work
How to get this PCB diagrams?
Do you ifx this also for customers? =)
Yes, we offer mobile phone repair services, but the MOQ is 10 pieces. It is not cost-effective for individuals to send the phone to China.
please how do I get this software,can I get online coaching from you guys?
Nice Information
How about my iphone 6+ issue..
1. Mute is not working properly the switch on the side is not working and while using the mute goes on and off everytime.
2. The power button stops working like when i press it nothing happen, no sleep no turn off but while im using turn off display pops up like the mute problem.
Lastly, its not charging... when i plug the charger "accy not compatible" pops up so i have to turn off the phone to make it charging even w/o charging indicator on the display.
Now my phone is dead and when i brought it to the repair shop w/o opening the phone they said its an Ic chip problem. So, what do you think? Please i need honest opinion. Thanks!
I have an iPhone 6 that was not charging after water damage. Phone could boot with a good battery but could not charge. I tried to replace u2 ic and rehot u1401 ic and now phone is completely dead, iTunes does not recognize it. I try to measure the volts of the capacitors near this chips and no volts, no sigh of life!! What i did wrong? Can you fix this if i send you the phone? What's the possibility to repair this? Thank you
which dongle are you using !
It 's a dongle with PCB files, but we just have Chinese version.
Was that the Tristar chip
does the cinese rework station works well
It works well, lol
I phone 6 and 6s LCD light solution
whats the name of chip you replace ?
King Slayer Tristar. Also called U2
1610A2 usb ic
u2 ic
Wow good work
from which phone we get the new chip
I want to buy member ship of this software
For free Bitmap Software, please check the information about REFOX:
www.refoxteam.com/
What if there is absolutely zero voltage at the battery connector? Do I have a faulty lightning connector?
You mean the battery or the motherboard? If it the connector on the battery, it would be battery self-protection. If it is the battery connector on the motherboard, it would be something wrong with your charging circuit.
Thanks for your reply. I bought a new dock connector and replaced the faulty one, and it seemed to fix the issue. I meant the the connector at the motherboard.
Hey Mr. I have the same problem. my I phone 6 not charging. I tested the voltage battery like you 2.58v and the voltage between the connector and sim card it's 2.58v
What is the problem??
I would start by plugging it into a computer with iTunes to see if the phone is detected. If it is, the phone may simply be in DFU mode. Restore then retest.
Still not working? I would change TriStar. It's such a common point of failure, I simply replace it as a troubleshooting measure. Then retest.
Still not charging, inspect and replece Tigris. Then retest.
Still not charging? Check your gas guage lines. They extremely unlikely for a no power repair. Because,even with those lines damaged, the phone will still power on, although the battery percentage will never change.
If none of those solve the problem,then you need to start the more advanced troubleshooting, which is check the data lines.
AngryTechGuy Thank you , I change my IC charging but now iPhone is very hot and charges don’t spend 4 hours.
@@hatemboussba4180 The location of the heat can be telling. Is it front or back? Top or bottom?
Of the heat is at or near the chip that was changed , it is more likely the chip's orientation is not correct (check the dot on the chip versus the orientation on the schematic), or the chip is not seated correctly so the balls may be bridged together, or components in the surrounding area have been moved.
I'd start near the replaced chip then spread out.
Dear Rewa Team... my iPhone 6 if i use AC adapter it won't charging, but when i using Power Bank it works until my battery is full.... any ideas what happened? thx
good job
I have a problem in my iPhone 5 logo stuck in black display and iPhone falsh failed after 95% done.so you have any solution plz tell me.
He plugged LCD cables with battery plugged in !!!
how i buy this program?
6:00 where did it goooo?
It was blown away. lol
what should be done if an iPhone dies all of sudden.which part should i work first.power ic,emmc,or anything else can be done??
Muzzammil Shaikh probably the power ic
My output voltage 2,9 what's wrong there tigris alsoni2 replaced phone power on with good.battery
Am I able to send you a phone for you to see if you can fix it? I bought an iPhone 6 and changed the charging port then it just stopped charging period there was some work done to it by a local store and now I used the screen for another phone and the phone is just sitting there wondering if you wanna trouble shoot it and fix it I'll pay I don't mind?
So sorry that we do not cover individual business. Our phone repair services come with a MOQ of 10 pieces.
Meu iPhone 6 fica desligando, mesmo tando com carga na bateria, Qual pode ser o problema??
Awsome😊
nice oooooooo some 👍👍👍
perfect!
top um dia aprendo com vcs... muito bom mesmo
Superb
name of the schematic dongle
Hi everyone,
My iphone 6 has a charge problem.
I have verified battery voltage=ok, mother board voltage connector=ok.
I can charge it only if i connect mightening cable (lightening bolt flash then disappear)then switch the phone off.
Thanks in advance
I'd swap the battery then retest.
Next test the gas gauge lines.
6:42 is that flux?
My iphone 6 touch id does not working when i update ios 12. what can i do for it.
Hi, to better solve your problem, pls turn to reliable repair shop nearby.
dude. how much does it cost to have someone fix this for me. i dont wana do it :((((((((((((
You have great channel, i learned lots about board repair
they just show you how to find the issue and fix it. Actually, as an experienced technician, he doesn't need to check the material on computer, but fix it straight away.
ofcourse
150 usd
What is the name of the music?
Michael Boot Apple and stone invisible moment
no way I can do that, have no tools, no clues and cleans stuffs, no skills at all, left me only crying and give you a thumbs up... I thought was only the battery. Changed and still drain.. still crying...
Sir Same solution or i phone 6s
شرح جميل جدا
where can I found this dongle?
We have Chinese version logic board file with dongle at present. It takes some time to convert it to English version.
+REWA Technology I have got .pbc files and pads but newer see this program before
Maybe we got different versions. Repairs are based on specific cases.
Please help how to learn
I want study this course how
I have apple iphone 6Plus, on battery Connector V 3.47 showing but Battery not Charging ! How to solve this problem .
Dear sir & Reva Team Help
Yes me to. Did you solve it.
can you upgrade the memory of iphone 5?
could you sell that charging IC to me ??
多谢分享。。。
plzz provide this schematic
don't put shield back on?
Bạn cho mình xin tool xem sơ đồ đi bạn
Very nyc
sir you install only one ic...how can it possible. with one ic charge.
Qual dongle e essa?
REFOX is a free schematics. You can download and register for free.
Here's the website: www.refoxteam.com/
@@rewatechnology2008 Have you tried Phoneboard (phoneboard.co) ?
👍
i try to with pm ic/audio ic but still same (-1)
Usually iTunes error (-1) is related to Baseband Power and Baseband EPROM.
Are you sure this is even safe..?