Portable CVC VCR - Grundig VP 100 - Short record and playback test

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • NEED HELP. IF SOMEONE HAS AN IDEA WHY THE IMAGE BEGINS TO FLICKER AND STARTS MOVING LEFT / RIGHT, PLEASE REPORT.
    WENN JEMAND EINE IDEE HAT, WARUM DAS BILD ANFÄNGT AN ZU FLACKERN UND ZU WANDERN, BITTE MELDEN.
    A short record and playback test.
    The sequences were recorded on a CVC video tape, the tape was rewound and the playback was recorded on PC.
    There have been no video optimization and no cleaning.
    Soon there are more videos of the Grundig VP 100 here on my channel.

Комментарии • 14

  • @nostalgie_fan
    @nostalgie_fan 5 лет назад

    If still be of interest after 4.5 years:
    I had a similar issue. Despite the capacitors which should all be replaced this shown issue could be fixed by adjusting the operating point of the Capstan driver (located on the small board on the right side of the recorder).

  • @RickyMK
    @RickyMK 8 лет назад +5

    Either bad traking or overused tape

  • @tamas_103
    @tamas_103 10 лет назад +2

    I think this is occurs by bad tape driving. At 1:27 starting to skeep the video track. Too slow or too fast the tape on this stage i think

  • @volkerking7634
    @volkerking7634 9 лет назад

    Oh i'm sorry this must be in english language - 1. the recorder is falling out of the track - maybe the syncron head can't read the tracking information or the the V-Syncron will not recored on this tape during recording (the v-sync is not on the tape) 2. the tracking electronic is falling out during playback could be a trimpotentiometer, wrong wire etc. 3. the erasehead will not erase the longheads and the old v-syncs so you can't overwrite the synchrontrack. 4. on the enter of the headdrum the picture is not well it could be that the lineal is dirty or the bandtrack is disalligned check this with a small mirror and/or the Capstan tire is in a bad condition change it or clean it.

  • @volkerking7634
    @volkerking7634 9 лет назад

    Der Recorder fällt aus der Spur dies kann verschiedene Ursachen haben. 1.Syncronkopf verunreinigt oder Kopfverstärker liefert kein Signal oder Syncronkopf nimmt kein V-Sync mit auf das Band auf z.B. Löschoszillator fällt aus. 2. Die Elektronik die das Tracking macht fällt im playmode aus. 3. Synchron wird gar nicht mit aufgenommen. Schaltbild und impuls verfolgen ob der auch an den Längsköpfen ankommt. 4. ich glaube nicht das es etwas mit der Headdrum zu tun hat aber oben ab Bildeinlauf das Lineal oberprüfen und die Andruckrolle kann das auch sein wenn der Capstan durchrutscht.

  • @horrortimeproductions5504
    @horrortimeproductions5504 9 лет назад +1

    The audio/tracking head needs adjusted with a screwdriver.

  • @DJmorex
    @DJmorex 10 лет назад

    hi, i don´t know much about technical support, but i think that it might be the cassette. when i was a kid i remember that my vhs cassettes become like that after been used bunch of times...

  • @1127snowbunny1127
    @1127snowbunny1127 10 лет назад

    The only thing I can think of is the tracking.

    • @TheMustysmell
      @TheMustysmell  10 лет назад

      Hi. Thanks for the hint. I will try it next weekend.

  • @Schnipp08
    @Schnipp08 10 лет назад

    Welches Baujahr ist die Kamera?

    • @TheMustysmell
      @TheMustysmell  10 лет назад

      Hallo Schnipp08. Auf der Verpackung konnte ich leider keine Angaben finden. Ich schätze die wurde zwischen 1980 und 1985 gebaut. Es ahndelt sich um eine Röhrenkamera - Stichwort Newvicon. Gruß.

    • @Schnipp08
      @Schnipp08 10 лет назад

      TheMustysmell Vielen Dank für die Info! :-)

  • @dannyjaar
    @dannyjaar 9 лет назад

    sticky tape or a bad head drum