Citroen DS3 Door Panel & Wing Mirror Removal - How To DIY

Поделиться
HTML-код
  • Опубликовано: 3 фев 2025

Комментарии • 42

  • @christophersmith7714
    @christophersmith7714 Год назад +2

    Finally a great video of someone who knows what he is doing and perfectly explained! Thanks for posting

  • @jimwood8906
    @jimwood8906 4 года назад +3

    Big thank you. Saved me £ hundreds in garage fees replacing my daughter's wing mirror. Everything as per your video. I replaced the pop rivets with a smaller size as the Citroen ones are massive, which has worked. Thanks again Mr Burke.

  • @michaelpullinger2447
    @michaelpullinger2447 2 года назад +2

    Good video. To tighten the wing mirror screw I used a 13mm half inch drive socket forced onto a piece of 15mm copper pipe. Did the trick.

  • @castrolgtx5064
    @castrolgtx5064 6 лет назад +5

    Once again you don’t disappoint thanks very much for sharing this Ger 👍

  • @georgeradu5775
    @georgeradu5775 4 года назад

    Oh! Thank you so much for this, i have to change the mirror for a DS 5 and this is the only video on internet about mirror of a DS. Thank you again!

  • @richardpeers4015
    @richardpeers4015 2 года назад

    Great video mate, just used it to change one myself after someone hit the old one and drove off, went like clockwork thanks

  • @c0olking
    @c0olking 6 лет назад +4

    I found your video because I wanted to apply an extra piece of rubber around the mirror, since there is a problem with rust below the mirrors on the DS3.

    • @GerardBurkeBurkesGarage
      @GerardBurkeBurkesGarage  6 лет назад

      Yes the same thing was happening on this one before the repair.

    • @c0olking
      @c0olking 6 лет назад

      Gerard Burke can u tell me where to find the rubber part?

    • @GerardBurkeBurkesGarage
      @GerardBurkeBurkesGarage  6 лет назад +1

      The door needed a dent repaired on the lower side, but while I was at the dent I decided to remove the corrosion, x4 heavy coats of primer before the door was repainted. The seal around the wing mirror was not changed.

  • @mattjones2939
    @mattjones2939 3 года назад +1

    This video was a life saver! Thank you!

  • @stecarlos
    @stecarlos 2 года назад

    King Tony 425513M socket should work. I didn't find anything cheaper and with acceptable quality. For once a life time job also something called tubular wrench may works. Thanks for video it's saved me a lot of time.

  • @ZackArmstrong-jb1nq
    @ZackArmstrong-jb1nq Месяц назад

    Hello might be a stupid question about wing mirror but when you drilled the rivs out what do you re use instead when putting back on cheers

  • @DanCarsi99
    @DanCarsi99 5 лет назад +1

    Great video mate! Finally know how to remove the wing mirror on my ds3, cheers!

  • @matteorosso6464
    @matteorosso6464 2 года назад +1

    Hi! I really liked the video!
    Do you know if it is possible to take out only the blinker part without doing this entire process?? Thank you so much

  • @andynightingale7335
    @andynightingale7335 2 года назад

    Very useful. Thank you.

  • @BeautifulBirman
    @BeautifulBirman 2 года назад +1

    Good video however, I was hoping it would show how to remove the chrome rubbing strakes on the outside. Do you have any tips on that please, Gerard?

    • @jdm1432
      @jdm1432 2 года назад

      Some are glued on some are clipped

  • @CEC1645
    @CEC1645 2 года назад

    What's the size of the socket please. Need to purchase it

  • @arnoyt77
    @arnoyt77 4 года назад +3

    What are the specs of the deep socket ?

    • @CEC1645
      @CEC1645 2 года назад

      Did you get a reply?

    • @angelicolagi
      @angelicolagi 2 года назад +2

      @@CEC1645 it has to be 13mm 80mm long at least

  • @damianliszewski2301
    @damianliszewski2301 4 года назад

    what size of the key to screw the mirror??

  • @laurathompson2540
    @laurathompson2540 3 года назад

    Hi there, citroen ds3 and cant fold side mirrors in,do you know if they are ment to do it automatically when lock car, tried manually and they wont budge

    • @benjamingeron2753
      @benjamingeron2753 3 года назад

      You have to push hard on them. I was scared to do so the first time but it's ok

  • @piotrejma2046
    @piotrejma2046 11 месяцев назад

    Hi All
    Did anyone know the part number for the door membrane driver side?

  • @earotinaj
    @earotinaj 5 лет назад

    Do you have to remove the speaker to replace the wing mirror?
    Thanks for the guide

  • @arktez9307
    @arktez9307 Год назад

    Really i have to remove speaker to disconnect the mirror?

  • @AmazingDigger
    @AmazingDigger 2 года назад

    Ok but how do you get access to the window, so we can remove it

  • @sophiegreen2802
    @sophiegreen2802 5 лет назад

    Hi I have a ds3 and have noticed big drain holls under the cylls is that normal many thanks

  • @carloboni9550
    @carloboni9550 3 года назад

    Thanks Iv got to paint the door where the mirror is common fault I hear

  • @miichal07
    @miichal07 5 лет назад

    Thanks!

  • @dr.biscuits
    @dr.biscuits Год назад

    Cheeers pal...

  • @angelicolagi
    @angelicolagi 2 года назад +3

    Unbelievable how frenchs overcomplicate things for a crappy car