Marshall MG Series MG50CFX 50W 1x12 Guitar Combo Amp Carbon Fiber
HTML-код
- Опубликовано: 21 авг 2024
- Item # H76563 001 | Model # M-MG50CFX-U
The ideal practice amp with an analogue tonal heart and solid digital effects section.
The Marshall MG Series MG50CFX 50W 1x12 Guitar Combo Amp is an ideal amp for practicing and even performing in small to medium settings. Boasting a bold carbon fibre clad look, solid digital effects and MG's critically acclaimed, analogue tonal heart, the MGCF Series has arrived and is already the practice amp choice of some of the world's leading players.
www.wwbw.com/M...
I got one of these. Super super amp. Ive gigged with it recorded with it and rested my coffe mug on it. Brilliant value for money and it takes coffee stains beautifully for that aged look
Haha 😄🤣 I like the way you put that👏🙆
@@Joe7zn well just listing it's many practicalities Joe my friend
I can't wait I just ordered mine will get here Tuesday sometime "hopefully ".
Thanks for the review. I learned a little about it.
HEY!!! We're over here! Stop looking over there!
This guy can plug in his guitar to a potatoe and it will sound good.
Nicks bad ass listen to grim reaper
He is indeed the King....
Edward
great amp. where are you from? unique accent
His name is Nick Bowcott and he's British. Used to play in Grim Reaper back in the 80s. He is a very underrated guitarist.
@@TheRosswise britain is kinda unspecific. Theres like 3 countries and hundreds of accents that could be called british
@@TheLowest Like a bit Bristol to me.
@@TheRosswise See you in Hell my Friend.
Tony Blackburn: ‘seddidup’ to your sadisfaction, your own Seddings’ not one ‘T’ in the whole review 😂
Why does mine sound like it’s breathing
@Woodwind&Brasswind Hello, I just bought this amp and I had a question… Whenever I switch from either Crunch or OD1/OD2 to the Clean channel I am noticing that the Clean channel is very much louder than any of the distortion channels. Also when I engage the FX (either from Clean or Crunch/OD) it also increases the volume significantly. I have tried playing with the Volume & Master Volume but have had no luck in creating a same level volume for Clean, Crunch/OD & FX.
Clean and FX always make the volume significantly louder when switching to them. Is there a way to accomplish this? Thanks so much!
Balance the gain 😎
I noticed this also with the MG30GFX. The OD2 channel falls apart with Master turned past 1:00 on the dial. I played a 1-hr set in a small bar with the 30-watt 1x10, and it failed me miserably--grossly underpowered for its wattage rating and not enough headroom to properly support the OD1/OD2 channels. I'm currently enjoying the 100-watt half-stack version, but it's too much amp for my most of my needs, so I'm wondering if I can step down to the MG50 or if that would be TOO much of a downgrade.
Can you use pedals on this amp
you can use effects pedals on any guitar amp
@@Gabrol no
@@chamaripalliyeguru2417 explain
@@Gabrol sorry my bad haha, I was thinking about an fx loop. Ig you could use the main input but. With a few pedals it sort of changes the actual tone unlike with an fx loop :)
@@fionamcclarty610 what? what you wrote makes no sense at all
great video. What guitar you're playing?
Really don’t know who’s that is ?
I’ll give a hint he plays in sabbath
I cannot for the life of me figure out how to run a looper pedal with this amp! It's driving me crazy........!
On its own in the FX loop?
Help! When I activate the delay nothing happens, it doesn't sound. When I bought the amp it sounded perfect but not now, does anyone know what's going on?
You may have figured it out already, but it sounds like you need to make sure the FX button is lit up first. If not it may need to be looked at.
@@kennywu2k10 I press the FX button already, but the delay it's not working
@@brolymas Twist the Delay knob a little in one direction or the other, so the amp detects the change and can track the new settings. Then dial in the Delay intensity to taste and press Store.
Tony Iommi signiture sg
Is that the $20,000 Tony Iommi SG?
epiphone model im sure, about 700 iirc
Can it be connected to a PA system? Without using a mic?
yes
@@westyavro how sir?
@@westyavro how?
Effects Send to a DI box with cabinet simulation (or an IR pedal) connected to the PA should work. Granted, that will probably mute your speaker because you've "opened" the effects loop circuit, and the Master Volume probably won't work. You'd probably need to re-balanced your separate channel volumes through front-of-house.
any one have the amp how do you like it
I just tested an MG30CFX at my local music store, which is almost the same but smaller, and I really like it, this series of amps has a nice tone and also a very wide range of tones :) from very clean, to some blues, to modern alternative rock, to even thrash metal :) the digital effects may not be the best, but they're not bad either... I think the Marshall MGs Carbon Fibre amps are some of the best, if not the best solid state amps available out there...
Pedro Antonio García Robleto Hey man i have a question. If i put pedals in it instead of using the built in settings will it sound great.
I love it. Its a great practice amp, and alright on stage. Its a well rounded amp. Good from everything from jazz to metal and everything between.
Not much distortion tbh, if u play hard rock heavy metal and stuff, this amp will be not the best option. The sound in general sounds clean although feels muted and blur. Good crunch tho
@@rockerstreet8743 i can make it sound like master of puppets, you just gotta know how to adjust it and really listen to the speaker and what it's outputting, not standing above it because it sounds flat sounding when you stand over it
So much white noises when not playing...
It’s a shame. I have the amp and the buzzing and humming are driving me absolutely crazy. I’ve played with the Settings for weeks on end and I can’t get rid of the loud buzzing and the ridiculous humming, I have to get rid of this amp.
Peter From Miami sounds like your guitar is picking up interface (lights, TVs, computers etc)
This amp lacks enough gain and ends up sounding muddy even with a mxr fullbore metal this amp ends up still being too muddy no mater what settings. Tested on schecter omen 6 pickups and emg 81/85. Might work out great for some but I didnt like it personally.
+DragonRoLo , My MG marshall sounds a lot better than my Peavy Classic 30 tube amp.
The Peavy is aweful with a Lespaul but sounds ok with a strat.
Maybe your pickups are too over wound.. making the muddy sound.
+larken558 sounds fine on my blackstar and my friends emg 81/85 also gave a muddy sound just had no mids at all his old dfx 15 sounded way way better.
+DragonRoLo ,I don't have the digital Fx amp I have a MG15cdr and a MG10.. I bought both for under $50 each at pawnshops and i think they sound really good on both a Humbucker and a strat.. especially for a cheap amp. (ive had a lot that were terrible like a cube amp).
Actually i find the gain control has way too much gain. I usually have it at about 2, but i mostly play blues stuff.
+larken558 is this discussion about the mg's? Nope its in regards to the cfx Only I agree the mg were far far better amps then this pos
i've had this amp for about 6-7 years, used luckly for me only for home and rehersal, it is absolute garbage, with time and damage it sounds even worse. Buy yourself a katana if you cannot afford a valve amp trust me. Od channels are terrible, the only one pretty good is the clean but with high volume it drives and becomes glassy.
For sure. I ended up with one and "clean" is the only usable channel. I only run it clean with a little built in reverb + few distortion pedals. It's a fookin tank though. Gets loud and gets the job done and I don't mind if it gets beat to shit.
At 3:35 Hey man you got a single wild hair on the right side of your head. You must have missed one before you shaved it. About an inch long atleast. I can’t pay attention to what your saying after I seen this. Keep resetting the video
Really bad sounding digital amp !