I bought this ruler years ago and never had to figure out how to use it; until I downloaded a pattern and it was a part of the tools I needed for the project. Thanks for perfect instructions on how to use it!!
Thank you, Judi! I need to try this as I'm tired of having to trim 1/2 square triangles using the 2, 4, 8, 16 or 32 at-a-time method that involves math and also trimming all of the finished squares! I'll give it a try soon.
I think that these rulers are underutilized in the demonstration category. They give so much bang for the buck. They are hands down the most effective way to join binding strips without futzing about with all that excess material and marking. Perfect joins. I cut by binding strips by laying one piece face up and grabbing the tail (to the left) and pivoting to the right and lay on top the other end. It cuts both ends at the correct angle. I also use this tool to make replacement corners for any clipped corners (to reduce waste) rather than use squares. Here's a tip when you have a gazillion cuts to make: If you cut a rectangle that is as wide as your strip width + 6/8, you only have to make one cut with the angled ruler. It's a huge time saver if you have to make many of these. Also, it helps with any that have mobility issues. (I typically make the rectangle cut using WOF for the odd cut and then use my Stripology ruler for cutting on the 1/2 inch for the normal strip height). This sizing works for the rectangle width because the width of the blunt tip for the seam allowance is 3/8 wide and you need two of them. Always make a test cut. Also, If I'm paper piecing triangles, I always figure out what size I need by taking the finished size of straight side, adding an inch and then cutting it out with this an HST ruler which includes seam allowance. It is a more efficient use of fabric, ensure that you are using grain appropriately AND it makes paper piecing much easier. Add more if you need more upsizing of your peices, do so, based on your sewing preference.
I have a pattern called Party of Six by Pat Speth that calls for this ruler. I don't have it so I was wondering just what it was. I do have the Folded Corner Clipper ruler by Creative Grids and I think it might be the same kind of thing. I hope so
I bought this ruler years ago and never had to figure out how to use it; until I downloaded a pattern and it was a part of the tools I needed for the project. Thanks for perfect instructions on how to use it!!
Thank you, Judi! I need to try this as I'm tired of having to trim 1/2 square triangles using the 2, 4, 8, 16 or 32 at-a-time method that involves math and also trimming all of the finished squares! I'll give it a try soon.
Thank you. Just got one. This tutorial is so helpful
Very helpful for jelly rolls
I think that these rulers are underutilized in the demonstration category. They give so much bang for the buck. They are hands down the most effective way to join binding strips without futzing about with all that excess material and marking. Perfect joins. I cut by binding strips by laying one piece face up and grabbing the tail (to the left) and pivoting to the right and lay on top the other end. It cuts both ends at the correct angle. I also use this tool to make replacement corners for any clipped corners (to reduce waste) rather than use squares.
Here's a tip when you have a gazillion cuts to make: If you cut a rectangle that is as wide as your strip width + 6/8, you only have to make one cut with the angled ruler. It's a huge time saver if you have to make many of these. Also, it helps with any that have mobility issues. (I typically make the rectangle cut using WOF for the odd cut and then use my Stripology ruler for cutting on the 1/2 inch for the normal strip height). This sizing works for the rectangle width because the width of the blunt tip for the seam allowance is 3/8 wide and you need two of them. Always make a test cut.
Also, If I'm paper piecing triangles, I always figure out what size I need by taking the finished size of straight side, adding an inch and then cutting it out with this an HST ruler which includes seam allowance. It is a more efficient use of fabric, ensure that you are using grain appropriately AND it makes paper piecing much easier. Add more if you need more upsizing of your peices, do so, based on your sewing preference.
Thanks!
I have a pattern called Party of Six by Pat Speth that calls for this ruler. I don't have it so I was wondering just what it was. I do have the Folded Corner Clipper ruler by Creative Grids and I think it might be the same kind of thing. I hope so
Easy
very helpfull
Please close your rotary cutter blade !!