Bought the X99TF back in January 2020. That order did not arrive after almost 3 months, so I cancelled it for a full refund and reordered another for $100 in late March. The second order arrived within 3 weeks. Then, around June 2020, the first one mysteriously arrived at my door. In the end, for $100 I received two X99TF's. Coupled with two E5-2678V3 which were each purchased on eBay for $85, I have two excellent platforms. With 2x 32GB of cheap REEC DDR3 1600 and Miyconst's turbo-unlock...voila!
I have read a lot of tutorials from many sites, after all, you are still a complete and specific guide for you, I will donate to you soon. I fixed my x99-TF-Q , now trying turbo-unlock with 2699v3 . Wishing you all the best
You should be getting paid from Huananzhi! ...but maybe not for this video. They might not be too happy about this one. But for everybody who isn't Huananzhi we are very thankful for the information. Stay strong good buddy.
you're not getting PCIe bifurcation, ECC RAM, quad-channel or more then 4 RAM slots with those...ppl buy these boards to make cheap DIY servers, not gaming rigs...
@@xjsabcd2947people using grey market motherboards are not normal consumers. homelabbers are not normal consumers. yet we do need three pci-e ports for 10gbit NICS and HBA's, doubly so on a board that requires us to have a gpu. most normal consumers don't even have a x86 computer anymore. maybe a old laptop or desktop they only use when their phone is broken.
Hi Miyconst, i just wanted to ask if you tested or have any idea about the Machinista MR9A-PRO, i know that you tested MR9A. but do you know if MR9A-PRO is good, or should i get the MR9A instead.i heard that MR9A-PRO is a copy of some Huananzhi board. i cant remember which one.
Theres a New Mother board called MR9A-S. im brazilian and these kits are getting more interesting. For the half of money of a ryzen kit i buy one of these with processor and RAMs
Thanks for your videos, there's always valuable information about these Chinese mbs. Quick question: I don't understand if the temperatures detected by both HWinfo and HWMonitor are realistic: TMPIN6, TMPIN8 121°C (!). (E5-2690 v3, Latest Bios 09/16/2022) should I be concerned? :)
No, these are just missing temp sensors on the motherboard. You shouldn't be concerned about these values but you should ensure good motherboard cooling.
Hello, I would like to know why the USB ports of my HUANANZI X99 TF Q motherboard remain on when the computer is turned off? what is the solution so that it is no longer connected when the computer is turned off?
Hi. I don't have the motherboard to check for the settings but I think there are some jumpers to disable USB standby power. If you need more help, please join my discord and send detailed pictures of the motherboard.
Well, I think installing graphics card in second PCI-e slot is more convenient, because this way you don't need to remove it in order to access all NVMe ports :P Not working RAID is a bummer though, considering that Q87 is a desktop but yet still an enterprise class chipset.
Hello. I'm planning on getting this motherboard paired with a E5 2667 v3 and 32gb of DDR3 memory on quad channel, do you know if the DDR3 memory will be compatible with that cpu? Thank you !
I've tried reading it but I still don't understand. According to the instructions, is it necessary to use another computer to connect to CH341a to read the BIOS? use X99-TF-Q , just opened the box , Hope you can help me . I followed the steps on your blog tutorial, no message except the CPU keeps turning on and off by itself T_T
gee- - I don't see well (double vision) and bought it thinking it was a TF. Would you trust it with the 140 watt TDP cpus? Mu Jingsha Dual F2 motherboard ran for a few days ok in single channel mode. Then I installed as missing I/O shield. I was reasonably careful but not the F2 will not boot. The green RAM slot lights all flash ;^( - maybe "jingsha" should translate to "dog poop"
If I use the first pcie slot the on board network port stops working......I'm not impressed I thought i could run 2 GPUs at x16 but im not having luck. What am i doing wrong?
It sounds like you have got a defective motherboard. The PCI-E X16 slots are connected to the CPU directly while the network adapter is connected via chipset, so it shouldn't interfere.
You have somehow corrupted your BIOS and need to restore it with an external programmer. This video should help: ruclips.net/video/4qX2zihB6UE/видео.html
@@Miyconst I've tried reading it but I still don't understand. According to the instructions, is it necessary to use another computer to connect to CH341a to read the BIOS?
@@Miyconst I use X99-TF-Q , just opened the box , Hope you can help me . I followed the steps on your blog tutorial, no message except the CPU keeps turning on and off by itself
Hi! I bought this mobo, but in CPUZ my chipset appears as "H87". Can I use your software to make UNLOCK in this chipset? In the software just appears Q87 chipset. Thanks for all.
I bought one, and get it in hands today, and just knowing now that it haves 2 models. Anyway i don't think is a big deal. I have 4x8 1886mhz and want to overclock it to 2133mhz, is possible? actually looking for the best bios to change CL of memory, in your Github are 3 for the TFQ
Pretty confident that you can adjust the timings on the Q model, not sure about the memory frequency settings though. AFAIK you can adjust DDR3 speeds on a Huananzhi QD3 mobo (a ddr3 version of QD4), which also has a Q87 chipset (like the one in a TF-Q model), so maybe you can do the same thing on this board?
My Huanaznhi X99 arrived dead, i was so gutted, they said i would get refund when i send it back, send it back costed lots of money, and at the end no refund.
Hello the X99 Specialist. I need your help. I blocked my Atermiter X99 with a bad timing Dram. And it hasn't reset bios. I would like buy a new motherbord. For you, wha'ts better model DDR4 ?
Hello 👋 im building system and Im Looking at these components Can you help and advise me Intel Xeon E5-2696 v3 asrock fatal1ty x99 xkiller ATX Used (tested works HUANANZHI X99 X99-TF (v1,v2???) Thank you very much
I had problems with this motherboard matched with R5 3600, but I solved it by mounting an extra fan with direct airflow over the VRM zone. It should be able the same with R5 5600X.
good afternoon I bought huananzhi x99 TF motherboard beautiful board, I had problems with ssd m2 my ssd m2 netac 5000 gen 4 4x does not recognize on the ssd m2 pci express 3.0 4x motherboard slot it only recognizes on the 2 second ssd m2 pci 2.0 4x slot, maybe my ssd is incompatible with the first slot of the motherboard because it doesn't recognize in the first slot, it only recognizes in the second can you help me?
It seems like you are having the standard compatibility issue and so far there is no solution for the problem. Feel free to join my Discord if you want some help with troubleshooting.
@@Miyconst but I must use intel xtu and throttlestop to overclock. I also don't understand why I can't overclock if I only use intel xtu. And when I overclock in bios setting, my Pc can't POST, then I must hard reset BIOS by removing CMOS battery
Bought the X99TF back in January 2020. That order did not arrive after almost 3 months, so I cancelled it for a full refund and reordered another for $100 in late March. The second order arrived within 3 weeks. Then, around June 2020, the first one mysteriously arrived at my door. In the end, for $100 I received two X99TF's. Coupled with two E5-2678V3 which were each purchased on eBay for $85, I have two excellent platforms. With 2x 32GB of cheap REEC DDR3 1600 and Miyconst's turbo-unlock...voila!
I have read a lot of tutorials from many sites, after all, you are still a complete and specific guide for you, I will donate to you soon. I fixed my x99-TF-Q , now trying turbo-unlock with 2699v3 . Wishing you all the best
did you have any luck?
Thanks for this review!
I literally nedded it!
Great job my friend, im excited to see you review on the new x99 huananzhi motherboard called "QD4", not just me, feel others as well.
So far I don't plan to test QD4, but plans may change in the future.
You should be getting paid from Huananzhi! ...but maybe not for this video. They might not be too happy about this one. But for everybody who isn't Huananzhi we are very thankful for the information.
Stay strong good buddy.
Thanks for another great review and test, mate, your are awesome ✌️
Simply excellent like the rest of your videos!
Used B450 boards and old Ryzens are getting cheaper and cheaper now, these X99 boards will be difficult to sell at this moment.
you're not getting PCIe bifurcation, ECC RAM, quad-channel or more then 4 RAM slots with those...ppl buy these boards to make cheap DIY servers, not gaming rigs...
@@AKAtheA very very few people need so many PCI-Es, and ECC is useless for normal comsumers.
@@AKAtheA people actually do both, they buy it for budget servers and also budget gaming rigs and for gaming all the things you cited are pointless.
@@xjsabcd2947people using grey market motherboards are not normal consumers.
homelabbers are not normal consumers. yet we do need three pci-e ports for 10gbit NICS and HBA's, doubly so on a board that requires us to have a gpu.
most normal consumers don't even have a x86 computer anymore. maybe a old laptop or desktop they only use when their phone is broken.
Great video as always. Machinist X99-MR9A is good motherboard.
Thanks for another
Hi Miyconst, i just wanted to ask if you tested or have any idea about the Machinista MR9A-PRO, i know that you tested MR9A. but do you know if MR9A-PRO is good, or should i get the MR9A instead.i heard that MR9A-PRO is a copy of some Huananzhi board. i cant remember which one.
As far as I can see, these two are identical, but the Pro version has better appearance and active VRM cooling.
Theres a New Mother board called MR9A-S. im brazilian and these kits are getting more interesting. For the half of money of a ryzen kit i buy one of these with processor and RAMs
Thank you so much for you vídeos i dont know how to thank you.
Thank you so much!!!
Thanks for your videos, there's always valuable information about these Chinese mbs.
Quick question: I don't understand if the temperatures detected by both HWinfo and HWMonitor are realistic: TMPIN6, TMPIN8 121°C (!). (E5-2690 v3, Latest Bios 09/16/2022) should I be concerned? :)
No, these are just missing temp sensors on the motherboard. You shouldn't be concerned about these values but you should ensure good motherboard cooling.
Hello, I would like to know why the USB ports of my HUANANZI X99 TF Q motherboard remain on when the computer is turned off?
what is the solution so that it is no longer connected when the computer is turned off?
Hi. I don't have the motherboard to check for the settings but I think there are some jumpers to disable USB standby power. If you need more help, please join my discord and send detailed pictures of the motherboard.
@@Miyconst there are jumpers at the bottom of the map
Well, I think installing graphics card in second PCI-e slot is more convenient, because this way you don't need to remove it in order to access all NVMe ports :P Not working RAID is a bummer though, considering that Q87 is a desktop but yet still an enterprise class chipset.
I understand you were able to unlock the turbobust? Could you make a detailed video about it? There is very little information on the version Q board.
01:38 M.2 slots Hi! Can I use an M.2 Sata SSD on the Huananzhi X99-TF ?
No, as far as I remember, it's only NVMe.
Hi.. Can I handle 2666 v3? Btw thanks a lot for your videos!
Yes, it can handle E5-2666 V3.
Hello, I couldn't do the ResizebleBar on this mother, is there any way to do it? In the bios there is no option for Above 4G decoding
Hello. I'm planning on getting this motherboard paired with a E5 2667 v3 and 32gb of DDR3 memory on quad channel, do you know if the DDR3 memory will be compatible with that cpu? Thank you !
E5-2667 V3 is not compatible with DDR3, you need E5-2666 V3.
🙌👍
Hello. If the second pci express slot is x16, and the first is x8, is it better to insert the video card into the second slot? Thank you.
That's correct, the second slot is the preferred one with i7s.
thank u@@Miyconst
Myconst, the quad-channel on this motherboard works just for ddr4 or also ddr3?
It works with both, DDR4 and DDR3, if you install four memory sticks.
@@Miyconst Thank you so much!
I've tried reading it but I still don't understand. According to the instructions, is it necessary to use another computer to connect to CH341a to read the BIOS? use X99-TF-Q , just opened the box , Hope you can help me . I followed the steps on your blog tutorial, no message except the CPU keeps turning on and off by itself T_T
Yes, you need a separate computer or a laptop.
gee- - I don't see well (double vision) and bought it thinking it was a TF. Would you trust it with the 140 watt TDP cpus? Mu Jingsha Dual F2 motherboard ran for a few days ok in single channel mode. Then I installed as missing I/O shield. I was reasonably careful but not the F2 will not boot. The green RAM slot lights all flash ;^( - maybe "jingsha" should translate to "dog poop"
As long as you have good airflow over the VRM, it should be fine. JingSha has unfortunately degraded in quality a lot.
If I use the first pcie slot the on board network port stops working......I'm not impressed
I thought i could run 2 GPUs at x16 but im not having luck. What am i doing wrong?
It sounds like you have got a defective motherboard. The PCI-E X16 slots are connected to the CPU directly while the network adapter is connected via chipset, so it shouldn't interfere.
miyconst i have a huananzi bd4 with a e5 2666 v3 and occasionally i can get a i7 6950x is it compatible?
It's compatible, but no overclocking is possible with this motherboard.
@@Miyconstthx, keep the good work 👍🇺🇦
hi, i don't see my x99 tf q in bios dram timing & voltage tab. You could help me? I would like to change CL.
Please watch the video, I have answered this question.
Please, Help me . After using S3 Turbo tool, my pc ( x99-tf q, 2699v3 ) auto restart in when i press power button
You have somehow corrupted your BIOS and need to restore it with an external programmer. This video should help: ruclips.net/video/4qX2zihB6UE/видео.html
@@Miyconst I've tried reading it but I still don't understand. According to the instructions, is it necessary to use another computer to connect to CH341a to read the BIOS?
@@Miyconst
I use X99-TF-Q , just opened the box , Hope you can help me . I followed the steps on your blog tutorial, no message except the CPU keeps turning on and off by itself
@@akiramaster01 I can help if you can get the motherboard delivered to me.
Hi!
I bought this mobo, but in CPUZ my chipset appears as "H87". Can I use your software to make UNLOCK in this chipset? In the software just appears Q87 chipset.
Thanks for all.
Most likely you can, but I can't guarantee that since BIOS compatibility may be broken within different revisions of the same motherboard.
I bought one, and get it in hands today, and just knowing now that it haves 2 models. Anyway i don't think is a big deal.
I have 4x8 1886mhz and want to overclock it to 2133mhz, is possible? actually looking for the best bios to change CL of memory, in your Github are 3 for the TFQ
My processor is a 2696v3, i want to make it -70 -50 -50
Pretty confident that you can adjust the timings on the Q model, not sure about the memory frequency settings though. AFAIK you can adjust DDR3 speeds on a Huananzhi QD3 mobo (a ddr3 version of QD4), which also has a Q87 chipset (like the one in a TF-Q model), so maybe you can do the same thing on this board?
My Huanaznhi X99 arrived dead, i was so gutted, they said i would get refund when i send it back, send it back costed lots of money, and at the end no refund.
Did you open a dispute or just sent it back?
Hi, my x99 tfq hang in code 68. what should i do next. thank you
I can not find the bios chip
You have to restore the BIOS with an external programmer. Feel free to join my Discord and post pictures if you can't find the chip.
I have join discord chanel, pls accept
TF-Q vs X99 F8 , how is better ? I want get with 2698v3 ( 16 core ) .
Huananzhi X99-F8 is surely better.
What's the idle power consumption of your system?
It's about 50-60 watts when using a 60hz 1080p monitor. The monitor power consumption is not added.
Sounds lower consumption than the original TF version
Hello the X99 Specialist. I need your help. I blocked my Atermiter X99 with a bad timing Dram. And it hasn't reset bios. I would like buy a new motherbord. For you, wha'ts better model DDR4 ?
This video says it all: m.ruclips.net/video/AW0QgQNbBwA/видео.html
does this motherboard supportr an i7 6850k ?
If i buy a m.2 4x4 can i run it without problems?
It works but you have to manually set PCI-E bifurcation in the BIOS.
Can i Unlock Turbo Boost on this Mobo? I bought also Xeon E5-2690V3
Please watch the video 😀.
I can mix DDR4 3200 vs DDR4 ECC 2133 ? Because I have 2 sticks of 16GB 3200 available. I want to buy 2 more 32GB 2133 sticks
No, you can't. Only one memory type can be used at a time.
Hello 👋 im building system and
Im Looking at these components
Can you help and advise me
Intel Xeon E5-2696 v3
asrock fatal1ty x99 xkiller ATX
Used (tested works
HUANANZHI X99 X99-TF (v1,v2???)
Thank you very much
Hello bro.
Gigabyte b450m ds3h + ryzen 5600x
It will work fine?? Or vram problem?
I had problems with this motherboard matched with R5 3600, but I solved it by mounting an extra fan with direct airflow over the VRM zone. It should be able the same with R5 5600X.
@@Miyconst
Thank you very much.
Do you recommend a case that has good airflow??
@@MohammedMohammed-gk1oy the best value chassis are usually found on the second hand market.
good afternoon I bought huananzhi x99 TF motherboard beautiful board, I had problems with ssd m2 my ssd m2 netac 5000 gen 4 4x does not recognize on the ssd m2 pci express 3.0 4x motherboard slot it only recognizes on the 2 second ssd m2 pci 2.0 4x slot, maybe my ssd is incompatible with the first slot of the motherboard because it doesn't recognize in the first slot, it only recognizes in the second can you help me?
It seems like you are having the standard compatibility issue and so far there is no solution for the problem. Feel free to join my Discord if you want some help with troubleshooting.
@@Miyconst
thanks
Hello friend , machinist mr9a pro version please make a test and review about it , i am confused to buy or not.
As far as I know, it's the same motherboard, just a slightly upgraded appearance.
Can i use DDR4 2400 MHz with huananzhi x99 tf-q and Xeon E5 2666 v3?
Yes, you can, but the speed will be still limited to DDR4-2133.
@@Miyconst thanks :D btw. I have just discoverd your Chanel, is great! Good job :D
Configuration turbo boos unlock?
Please watch the video.
Yikes... this should really be about £80/EUR....
Totally agree.
Does it have tpm 2.0???
It does not.
@@Miyconst still didnt support tpm module right???
That's right, no TPM support.
@@Miyconst thank you
@@Miyconst can i use debug header for TPM module
I can overclock xeon 1650 v3 with x99 tf-q, but we only use intel xtu to overclock, cannot overclock in bios.
That's good. What chipset do you have?
@@Miyconstit's intel x99
@@gamechoi1504 are you sure it's X99-TF-Q motherboard and not X99-TF?
@@Miyconst yup, I sure that it's x99tf-q.
@@Miyconst but I must use intel xtu and throttlestop to overclock. I also don't understand why I can't overclock if I only use intel xtu. And when I overclock in bios setting, my Pc can't POST, then I must hard reset BIOS by removing CMOS battery
since AMD'Ryzen price fall, with cheap B450 broad and 1st/2nd Ryzen, X99 become less and less competitive.
Absolutely true.
Ностальжи перелогинся, мы тебя узнали😂🤣