Anyways here’s a brownie recipe:3 Prep time: 15 mins Bake time: 20 - 25 mins Ingredients: 1 ½ cup Flour 1 tsp Salt 1 tsp baking powder 1 egg 12 tbsp butter (12 tbsp = 1.5 sticks of butter) 1 ¼ cup dark brown sugar 1 tsp vanilla essence 2 tbsp espresso powder ½ cup chocolate chips (optional) ½ cup crushed walnuts (optional) - Preheat oven to 350°F (~176°C). Mix the flour, salt, and baking powder in a small bowl. In a saucepan, heat the butter and sugar together and mix until incorporated. (the mixture isn't going to thicken - its just all going to kind of melt together and be liquidy) Move the butter mixture into a big bowl. (The rest ingredients will be mixed into this mixture.) In another small bowl, crack the egg and mix until yolk and whites are mixed together. In a small glass, add the espresso powder to the vanilla and combine. When the butter mixture is lukewarm to touch, add in the espresso vanilla mixture and the egg and whisk until mixed. Add the flour mix in 2 parts, folding the wet and dry ingredients together so that they're properly mixed together with no lumps. Add in the hand-crushed walnuts and/or chocolate chips. Bake for 20-25 mins. It's done when if poked by a toothpick the toothpick comes out clean.
here is how to make an Atomic Reactor -A vacuum chamber, preferably in a spherical shape -A roughing vacuum pump capable of reaching at least 75 microns vacuum -A secondary high vacuum pump, either a turbo pump or oil diffusion pump -A high voltage supply, preferably capable of at least 40kv 10ma - Must be negative polarity -A high voltage divider probe for use with a digital multimeter -A thermocouple or baratron (of appropriate scale) vacuum gauge -A neutron radiation detector, either a proportional He-3 or BF3 tube with counting instrumentation, or a bubble dosimeter -A Geiger counter, preferably a scintillator type, for x-ray detection and safety -Deuterium gas (can be purchased as a gas or extracted from D2O through electrolysis - it is much easier and more effective to use compressed gas) -A large ballast resistor in the range of 50-100k and at least a foot long -A camera and TV display for viewing the inside of the reactor -Lead to shield the camera viewport -General engineering tools, a machine shop if at all possible (although 90% of mine was built with nothing but a dremel and cordless drill, the only thing you really can't build without a shop is scratch building the vacuum chamber) STEP 1 A quality high vacuum chamber is required for the fusor to operate. Sometimes an appropriate chamber can be found on eBay, but generally it is best to make one. Parts can be scrounged for several hundred dollars, or purchased new for $500+. Get two stainless steel hemispheres, purchase two corresponding conflat-flanges (8" flanges in my case), bore out holes for accessory flanges, and then TIG weld it all together. Flanges are typically either of the KF or the conflat style. Conflat can be seen in the image below as the flanges with bolts, and KF (kwik-flange) are seen as those with only clamps holding an o-ring on the mating surface. Only weld on the inside, never on the outside (since virtual leaks can be formed if both inside and outside are welded). If you've never TIG welded before, it would be wise to have someone with experience do it as the welds must be flawless with no pin-sized holes or porous areas to hold a vacuum. After machining, thoroughly clean the chamber and avoid getting fingerprints in it since these will outgas, which means at vacuum pressure molecules in the oil of finger prints or machining oil will become vapor and make it hard to maintain plasma stability or reach a good ultimate vacuum level. STEP 2 Install the oil diffusion pump (or turbo pump if you have a bit of luck scrounging or a higher budget). Fill the pump with quality diffusion pump oil to whatever fill level the pump documentation suggests, attach the inlet to a valve which then connects to the chamber (see diagram), and attach the outlet to a mechanical backing pump capable of reaching at least around 75 microns (any higher and the diffusion pump will not operate properly or the oil will oxidize quickly). Make sure the pump is sufficiently cooled, many oil diffusion pumps require water cooling, smaller ones such as the one pictured can get by with a decent air flow. Once this is assembled, turn on the mechanical pump and wait for the vacuum to reach at least 75 microns. Next you can test the high vacuum pump by turning on the boiler on the diffusion pump. After it warms up (could take a while), the vacuum should rapidly drop below the single micron range. STEP 3 The inner grid (where the high voltage is applied) must now be built and attached to a high voltage feedthrough. It is best to use a metal such as tungsten for the grid wires since it has a very high melting point, and the grid will get extremely hot during high power runs. This can be built however you wish, as long as it resembles a spherical shape of roughly 1-1.5 inches in diameter (for a 6-8" chamber), it should work fine. The grid should be internally attached to an electrical feedthrough such as the one pictured in the second image. This feedthrough needs to be rated for the cathode voltage that will be used, typically 40kv is a good target voltage. STEP 4 Deuterium gas is used as the fuel for this fusion reactor. You will need to purchase a tank of this gas (unless you wish to do electrolysis on heavy water, this process will not be documented here but nothing more than a small Hoffman Apparatus is required - higher purity gas can be gotten from a compressed tank). Attach a high pressure regulator directly to the tank, add an extremely fine-metering needle valve after this (or a laser drilled orifice in the range of 5 microns), then attach this to the chamber. A ball valve can also be installed between the regulator and the needle valve since needle valves are not shutoff valves. See the attached diagram now updated with the deuterium handling system STEP 5 If you can purchase a power supply (occasionally but not commonly found surplus) appropriate for fusion use, the high voltage becomes very simple. Simply take the output of the 40kv negative supply and attach it to the chamber with a physically large high voltage 50-100k ohm ballast resistor in series (large enough that its length will not flash-over if 40kv is applied to it in a plasma run-away or arc discharge). The difficulty is that it is often difficult if not impossible to find an appropriate fully assembled DC supply of this voltage level that is affordable to the amateur scientist. Pictured is my high frequency ferrite transformer pair, with a 4-stage multiplier seen behind it. If a fully assembled power supply (typically manufactured by either Glassman or Spellman), there are a few options: -Find an x-ray transformer, and if necessary either reverse the rectifiers for negative polarity or add rectifiers if it has none (an x-ray transformer core won't have rectifiers, it probably will if it is in its oil tank) -Build a switching high frequency ferrite power supply. This is what I did, however it requires a bit of EE experience since several aspects must be resonant and if it is ever taken out of tune, the transistors will burn out. Probably not the best option for people with little electrical background. PART 6 setting the detection discrimination level), followed by a pulse counter and/or rate meter. Shown in the first picture is my NIM setup, the second picture is the pre-amplifier attached to a moderated helium-3 tube, the third picture is a bubble detector after being exposed to neutrons. PART 7 Time to turn it on (don't forget to cover any viewports/cameras with lead! Also x-rays can pour out of ceramic feedthroughs so point them away from people. It is a good idea to be monitoring for x-rays where any people are present). The basic procedure is: -Turn on the roughing pump and wait for sufficient backing pressure, turn on the diffusion or turbo pump and wait for it to fully warm up or achieve running speed -Throttle the chamber back (with the valve between the diffusion/turbo pump and the chamber) -Ever so slightly open the needle valve to the deuterium tank -Turn up the high voltage until either plasma establishes on the camera, or you've reached 40kv and nothing has happened (don't forget, you only get one chance in your life to screw up with voltages of this degree) -If nothing has happened, keep admitting more gas and the pressure should keep going up. Plasma should form around 40kv at about 10-15 microns of deuterium. If all goes well, you should see on your camera the image below, and you should be detecting neutrons at this point. Operation is quite a balancing act, since the voltage is controlled by both the power supply, but also by Paschen's Curve and Ohm's Law relating to the pressure in the chamber. Great patience is required to "Get the hang of it", but after doing so it becomes quite simple to run. Operation can be aided by an ion-gun which will not be discussed in this article.
1:48 “You’re good, but i’m better!” Ahh counter “That’s it, i’m using my special attack!” Ahh counter “Not again..” ahh counter “Die!” ahh counter “This battle will be legendary!” ahh counter “*gulp* he’s not behind me… right?” ahh counter “Well well well..” ahh counter “This is my special attack!” ahh counter “Oh come on!” ahh counter “Let’s fight!” ahh counter “Get over here!” ahh counter “WHERE IS HE!?”ahh counter “He’s not behind me.. right?”ahh counter “I’m going above and beyond!! Plus Ultra!” ahh counter “That’s enough, im using my strongest form!” ahh counter “You’re pretty good..” ahh counter Honorable Mentions From Other People: From TheGoatsCoatHanger “he’s right behind me, isn’t he?” Ahh counter From balls69yearsago “Trust me” ahh counter From sleepysilvi “i am super vegeta” ahh counter From hibaqmahamed2907 “Ugh not again” ahh counter From DtBlakes7717 “Sorry my cat was on my keyboard” Thy honorable mentions will hopefully increase
incinerate be like: everyone clumped up together *Heard Incinerate Trigger* everyone: ahhhhhh run! incinerator: lmao haha 9:32 PS, This time 5:27 is where fade gets obliterated with studs OP moveset
"oh boy ahh" counter "just missed it" ahh counter "I got you now!" ahh counter "we'll see who wins! ahh counter "power of friendship!" ahh counter "*gulp*" ahh counter "Enough is Enough!" ahh counter "Ill give you that" ahh counter "Im goated" ahh counter
5:53, the cutscene and effects from atomic samurai depends on the sword, if you dont have it it doesnt show the effects, wich is very op and an cool detail (or defect if you want t call it like that)
A tip to balance random movesets: Turn on inf awakening and no awakening, this makes Saitama ults have a cooldown, and it also makes The Final Hunt, Incinerate and Death Blow not be a one use. Also obviously turn on no awakening because inf awakening is OP. This is what I usually do with my friends.
Fade bro when u want to use one- time-use moves then u gotta activate "No Awakening" (This gives even these moves a cooldown so u can use it multiple times) And some moves like Pinpoint Cut from Atomic's base need the character to be used (Variants still work like Death Blow fail aoe and Pinpoint cut jump Variant. Moves with no other Variant like Atomic counter DON'T work without the character)
1:48 “why I oughta” ahh counter 💀
Bro’s Hitting the Goku Pose 😭💀
“Now you shall experience true despair” ahh counter
1:48 "Aw shucks.." ahh counter 💀
9:50 so clean bro the timing is immaculate
Bros internal organs are no longer there
true
@@thyprodigymasterofthievery4295 floatys internal organs and bones has left the chat
O.25 speed and it looks like he said nig😊
1:48 "BEHIND YOU!" ahh counter
9:49 it sounded like fade obliterated all of floaty's bones with that one hit
It does too I noticed before this comment
Satisfying fr
bro fr did the chiropractor death blow
Perfect timing of successful and failed death blows.
"I'm sure I'll get him now!" ahhh counter
"this is my full power!" ahhh counter
"IT'S OVER!!" ahhh counter
“You are so dead” ahhh counter
“TAKE THIS!” Ahhh counter
"I AM ATOMIC!" ahh counter
3:29 bro did a whole 360°
This is why I'm never fighting any youtuber in strongest battleground
Blud had to apologize after seeing it lmao 😭
Bro got soo scared it even apologized
satisfying fr
1:40 bro countering his inner demon💀
YEPYEP
anyone know the song of it?
@@G3no0 search "jake25 17"
@@G3no0 fr, what's it's song
@@Watermelon.Cat.SupremacyI think it’s the Gojo song in his IM NOT DONE ahh pull short
1:39 "wtf dude" ahh counter
5:05 "MEOW! I'MMA GET IT G-" 💀
He said i am a kitty cat
he said “ MEOW IM A KITTY CAT”
1:16 "3 , 2 , 1 , i'm ga-"
I couldn't resist 💀
1:46 “I’ve got you in my sights” ahh counter 😂
1:44
2:33 them ahh counter jokes got me💀
FR
“so close!” ahh counter
"I am ATOMIC" Ahh counter is my fav bc I've watched the anime it's from and I get the reference
1 like = 1+ hour in sols rng im trapped from that game
7 hours, that already happend, did you cook?
bot
20 hours any good auras?
37 hours. Bro’s cooked 😭 💀
41 hours, let us know
If you're ever feeling down just remember these motivational words 5:04
MEW I AN A KITTIE CAT
3 most funniest things you heard
3. Holy's "No!"
2. Floaty's "C'MERE"
And finally
The funniest thing you heard
1. Fade's scream
Mommy is crazy lol 3:42
"3,2,1 IM GA-"
frr
6:24 7:14 put these in 0,25x speed bro became a vacuum cleaner 😂😂😂😂
9:50
Bro that slam that mangopool did + it timed the hit.clean af
That hit must of been extra hard fr
@@Acid_enjoyerlike me rn 😏
Anyways here’s a brownie recipe:3 Prep time: 15 mins
Bake time: 20 - 25 mins
Ingredients:
1 ½ cup Flour
1 tsp Salt
1 tsp baking powder
1 egg
12 tbsp butter (12 tbsp = 1.5 sticks of butter)
1 ¼ cup dark brown sugar
1 tsp vanilla essence
2 tbsp espresso powder
½ cup chocolate chips (optional)
½ cup crushed walnuts (optional)
-
Preheat oven to 350°F (~176°C).
Mix the flour, salt, and baking powder in a small bowl.
In a saucepan, heat the butter and sugar together and mix until incorporated. (the mixture isn't going to thicken - its just all going to kind of melt together and be liquidy)
Move the butter mixture into a big bowl. (The rest ingredients will be mixed into this mixture.)
In another small bowl, crack the egg and mix until yolk and whites are mixed together.
In a small glass, add the espresso powder to the vanilla and combine.
When the butter mixture is lukewarm to touch, add in the espresso vanilla mixture and the egg and whisk until mixed.
Add the flour mix in 2 parts, folding the wet and dry ingredients together so that they're properly mixed together with no lumps.
Add in the hand-crushed walnuts and/or chocolate chips.
Bake for 20-25 mins. It's done when if poked by a toothpick the toothpick comes out clean.
bro really spent hours in that
Lol
bro these brownes BUSING
8:20 Mario ahh laugh
thats right
1:40 “your done!” ahh counter
9:50 SO CLEAN BRO
Fr
1:40 holygrail was countering his dad😂😂
2:39 same with floaty bro was countering inner demons😂😂😂😂😂
Fr
same with fade
I still can't believe fade had to made them rethink there life choices
Holdon my dogs yapping to me about how he needs to meow to drink food brb
Yeah my cat doesnt like me anymoee
Fuck my fish is starting to eat water
W we got multiple big collabs so close to each other!
here is how to make an Atomic Reactor
-A vacuum chamber, preferably in a spherical shape
-A roughing vacuum pump capable of reaching at least 75 microns vacuum
-A secondary high vacuum pump, either a turbo pump or oil diffusion pump
-A high voltage supply, preferably capable of at least 40kv 10ma - Must be negative polarity
-A high voltage divider probe for use with a digital multimeter
-A thermocouple or baratron (of appropriate scale) vacuum gauge
-A neutron radiation detector, either a proportional He-3 or BF3 tube with counting instrumentation, or a bubble dosimeter
-A Geiger counter, preferably a scintillator type, for x-ray detection and safety
-Deuterium gas (can be purchased as a gas or extracted from D2O through electrolysis - it is much easier and more effective to use compressed gas)
-A large ballast resistor in the range of 50-100k and at least a foot long
-A camera and TV display for viewing the inside of the reactor
-Lead to shield the camera viewport
-General engineering tools, a machine shop if at all possible (although 90% of mine was built with nothing but a dremel and cordless drill, the only thing you really can't build without a shop is scratch building the vacuum chamber)
STEP 1
A quality high vacuum chamber is required for the fusor to operate. Sometimes an appropriate chamber can be found on eBay, but generally it is best to make one. Parts can be scrounged for several hundred dollars, or purchased new for $500+.
Get two stainless steel hemispheres, purchase two corresponding conflat-flanges (8" flanges in my case), bore out holes for accessory flanges, and then TIG weld it all together. Flanges are typically either of the KF or the conflat style. Conflat can be seen in the image below as the flanges with bolts, and KF (kwik-flange) are seen as those with only clamps holding an o-ring on the mating surface. Only weld on the inside, never on the outside (since virtual leaks can be formed if both inside and outside are welded). If you've never TIG welded before, it would be wise to have someone with experience do it as the welds must be flawless with no pin-sized holes or porous areas to hold a vacuum.
After machining, thoroughly clean the chamber and avoid getting fingerprints in it since these will outgas, which means at vacuum pressure molecules in the oil of finger prints or machining oil will become vapor and make it hard to maintain plasma stability or reach a good ultimate vacuum level.
STEP 2
Install the oil diffusion pump (or turbo pump if you have a bit of luck scrounging or a higher budget). Fill the pump with quality diffusion pump oil to whatever fill level the pump documentation suggests, attach the inlet to a valve which then connects to the chamber (see diagram), and attach the outlet to a mechanical backing pump capable of reaching at least around 75 microns (any higher and the diffusion pump will not operate properly or the oil will oxidize quickly).
Make sure the pump is sufficiently cooled, many oil diffusion pumps require water cooling, smaller ones such as the one pictured can get by with a decent air flow.
Once this is assembled, turn on the mechanical pump and wait for the vacuum to reach at least 75 microns. Next you can test the high vacuum pump by turning on the boiler on the diffusion pump. After it warms up (could take a while), the vacuum should rapidly drop below the single micron range.
STEP 3
The inner grid (where the high voltage is applied) must now be built and attached to a high voltage feedthrough.
It is best to use a metal such as tungsten for the grid wires since it has a very high melting point, and the grid will get extremely hot during high power runs.
This can be built however you wish, as long as it resembles a spherical shape of roughly 1-1.5 inches in diameter (for a 6-8" chamber), it should work fine.
The grid should be internally attached to an electrical feedthrough such as the one pictured in the second image. This feedthrough needs to be rated for the cathode voltage that will be used, typically 40kv is a good target voltage.
STEP 4
Deuterium gas is used as the fuel for this fusion reactor. You will need to purchase a tank of this gas (unless you wish to do electrolysis on heavy water, this process will not be documented here but nothing more than a small Hoffman Apparatus is required - higher purity gas can be gotten from a compressed tank).
Attach a high pressure regulator directly to the tank, add an extremely fine-metering needle valve after this (or a laser drilled orifice in the range of 5 microns), then attach this to the chamber. A ball valve can also be installed between the regulator and the needle valve since needle valves are not shutoff valves.
See the attached diagram now updated with the deuterium handling system
STEP 5
If you can purchase a power supply (occasionally but not commonly found surplus) appropriate for fusion use, the high voltage becomes very simple. Simply take the output of the 40kv negative supply and attach it to the chamber with a physically large high voltage 50-100k ohm ballast resistor in series (large enough that its length will not flash-over if 40kv is applied to it in a plasma run-away or arc discharge).
The difficulty is that it is often difficult if not impossible to find an appropriate fully assembled DC supply of this voltage level that is affordable to the amateur scientist.
Pictured is my high frequency ferrite transformer pair, with a 4-stage multiplier seen behind it.
If a fully assembled power supply (typically manufactured by either Glassman or Spellman), there are a few options:
-Find an x-ray transformer, and if necessary either reverse the rectifiers for negative polarity or add rectifiers if it has none (an x-ray transformer core won't have rectifiers, it probably will if it is in its oil tank)
-Build a switching high frequency ferrite power supply. This is what I did, however it requires a bit of EE experience since several aspects must be resonant and if it is ever taken out of tune, the transistors will burn out. Probably not the best option for people with little electrical background.
PART 6
setting the detection discrimination level), followed by a pulse counter and/or rate meter.
Shown in the first picture is my NIM setup, the second picture is the pre-amplifier attached to a moderated helium-3 tube, the third picture is a bubble detector after being exposed to neutrons.
PART 7
Time to turn it on (don't forget to cover any viewports/cameras with lead! Also x-rays can pour out of ceramic feedthroughs so point them away from people. It is a good idea to be monitoring for x-rays where any people are present). The basic procedure is:
-Turn on the roughing pump and wait for sufficient backing pressure, turn on the diffusion or turbo pump and wait for it to fully warm up or achieve running speed
-Throttle the chamber back (with the valve between the diffusion/turbo pump and the chamber)
-Ever so slightly open the needle valve to the deuterium tank
-Turn up the high voltage until either plasma establishes on the camera, or you've reached 40kv and nothing has happened (don't forget, you only get one chance in your life to screw up with voltages of this degree)
-If nothing has happened, keep admitting more gas and the pressure should keep going up. Plasma should form around 40kv at about 10-15 microns of deuterium.
If all goes well, you should see on your camera the image below, and you should be detecting neutrons at this point.
Operation is quite a balancing act, since the voltage is controlled by both the power supply, but also by Paschen's Curve and Ohm's Law relating to the pressure in the chamber. Great patience is required to "Get the hang of it", but after doing so it becomes quite simple to run. Operation can be aided by an ion-gun which will not be discussed in this article.
Finna try it out, thanks!
thanks ima try it now on my grandma
holy yapping tons why the fuck would we need a atomic reactor tho?
1:18 got me rolling
"Your really in for it now!” Ahh counter
10:00 bro unlocked ultra instinct 💀
Nice Vid! Keep Up The Good Work Man!
3:54 MANGO IS ACTUALLY AN NPC 🤣💀
9:50 mangos explosion sounded good with fade hitting floaty 🤳
1:48
“You’re good, but i’m better!” Ahh counter
“That’s it, i’m using my special attack!” Ahh counter
“Not again..” ahh counter
“Die!” ahh counter
“This battle will be legendary!” ahh counter
“*gulp* he’s not behind me… right?” ahh counter
“Well well well..” ahh counter
“This is my special attack!” ahh counter
“Oh come on!” ahh counter
“Let’s fight!” ahh counter
“Get over here!” ahh counter
“WHERE IS HE!?”ahh counter
“He’s not behind me.. right?”ahh counter
“I’m going above and beyond!! Plus Ultra!” ahh counter
“That’s enough, im using my strongest form!” ahh counter
“You’re pretty good..” ahh counter
Honorable Mentions From Other People:
From TheGoatsCoatHanger
“he’s right behind me, isn’t he?” Ahh counter
From balls69yearsago
“Trust me” ahh counter
From sleepysilvi
“i am super vegeta” ahh counter
From hibaqmahamed2907
“Ugh not again” ahh counter
From DtBlakes7717
“Sorry my cat was on my keyboard”
Thy honorable mentions will hopefully increase
1:39 “Nah I’d win.” Ahhh counter
*(I’m tired)* 1 like = 1 hour of sleep
Nsh stay awake and watch his vids mate
10 hours
💀💀 am ded
i´ll order something from the future so everytime fade uploads i can sleep in my bed, but what fade uploads i dream of it.
ay?
one day lol
9:49 the timing was so perfect
9:31 how they ran 💀 i swear this should be a meme
fade is underrated AF
Fade giggles like a little submissive boy
you commented this on holy grails vid too
@@CrimsonSaiya-jinI want him to see it
I agree
Goofy ahh Fans 😭💀
what
1:48 "im going get you" ahh counter
1:56 “cartoon” ahh run
"I'll get you next time!" ahh run
"IM FAST AS F### BOY" ahh run
“Got to get away!” ahh run
Bro every word in this video is Aaaah WASSUP,AAAAAAH OOOHH, YEEESS, my brother thought I was watching some 18+ things💀
Bros war cry💀 3:16
Stud was a complete chad at landing those sunrises 😎
"This battle isn't decided!" Ahh counter
Let's go new video❤❤ love the channel fade u are really funy
Fade be countering others counters 💀
Fade, your vids are an absolute W keep it up 👍❤️
2:44 I missed you ahh move
Me dodging my problems ahh move
The miss of friendship ahh move
I was lagging ahh move
.. Should I continue?
Yes
6:02 “you won’t get away with this!” Ahh 💀
I can’t move I can’t move braaaaaaa😂
Bro that’s the best part 9:34
4:45 nah alphas him, ur himothy
"Hes not gonna expect this play!" ahh counter
11:35 what move did he hit the counter with???
sunset prob
Yea sunset
Sunset sunrise is the dash one
6:28 STUD IM COMING FOR YOU >:(
W vid as always keep up the good work man
11:48
Bro thinks he is Kaido💀
incinerate be like: everyone clumped up together
*Heard Incinerate Trigger*
everyone: ahhhhhh run!
incinerator: lmao haha 9:32
PS, This time 5:27 is where fade gets obliterated with studs OP moveset
5:19 DID HE JUST SAY THE N WORD
He said mango-
he said mango
Hey fade excellent videos btw
LOL 2:30 IS FUNNY AS HELL
1:36 yk fade is gonna roast someone when that music pops out
at 5:58 i think stud made a oopises i heard n word run
AYOOOOOO
Yep he did
Oh naw I checked back he just says “mango run”
He never said oopises he said hehehe
“ 1:51 I I I I I- like I kinda forgot” why is bro stammering so hard 💀💀💀💀💀💀
i will do 1 comment for every push-up this like gets
edit: please ***READ*** the comment
And like beggars already start bruh🫥
Your capping stop posting these comments lil bro
Huh?
@@IP_breaddid you REALLY read?
@@skibidiman2728Did you also READ with a R
"oh boy ahh" counter
"just missed it" ahh counter
"I got you now!" ahh counter
"we'll see who wins! ahh counter
"power of friendship!" ahh counter
"*gulp*" ahh counter
"Enough is Enough!" ahh counter
"Ill give you that" ahh counter
"Im goated" ahh counter
Doing 1 pushup for 1 like (I'll post it for proof
I’m the first like
5:53, the cutscene and effects from atomic samurai depends on the sword, if you dont have it it doesnt show the effects, wich is very op and an cool detail (or defect if you want t call it like that)
I will do 1 push ups for every comment like
no one cares😊
Wha
fade every 1.029 minutes : AHHHHHHAJSN🪰🪰🪰🦅🦅🦅🦅
“Meow im a kitty cat”😂
1:40 “Take THAT!” ahh counter💀
8:07
"I CANT MOVE, I CANT MOVE, *cod zombies*"
-fade
Fade da Goat keep up the good work Fade!
Ahh counters 2:33 +
1:42
BROOOOO THIS IS A FAN OF YOU BRO THIS MAKE ME HAPPY IM SUB
8:06 - 8:11
His voice bro i can't ☠☠☠
i cAN't MoVEeEeE
im sure ill get him now!" aHH counter!
1:40 "theres no way he wont fall for this!" ahh counter 😭 2:00 bro holygrail went to find his dad 💀
“Meow! I’m a kitty cat!” Caught me off guard. 💀
I swear every time I hear "ding ding ding ding ding"
I know something fucked up is gonna happen😭
3:43 bro that’s so funny my mom was like: get your a in the truck there’s a lollipop
9:50 that timing… it’s…. Absolutely immaculate…
5:31 "thorugh the heaven and earth am alone am the honored one"
ahh scene
the fact that holygrails voice is so calm
2:33 when i ehard the music and saw him counter i knew what was about to happen yo
got me dying on the floor
4:54 finally someone who says BAO instead of BRO
Yea I WAMTED TO SEE THIS SOMEDAY!!!
The way Mango's missed Death Blow was timed with your hit at 9:49 ...
1:40 "Last but not least... My secret move!" ahh counter
1:39 “nah,I’d win” ahhh counter
2:29 “IM GONNA SHOW U MY TRUE POWER” ahhh counter
Fade just being the main target is so funny
Fire vdioe wait.... how you spell video *typing noises*
This kind of cringe, to be honest, but still fire video 🔥
Wow, your cover is translated into Brazilian Portuguese, thank you for giving some recognition to our country
A tip to balance random movesets: Turn on inf awakening and no awakening, this makes Saitama ults have a cooldown, and it also makes The Final Hunt, Incinerate and Death Blow not be a one use. Also obviously turn on no awakening because inf awakening is OP. This is what I usually do with my friends.
“3 strikes you’re out” ahh counter caught me off guard
7:21 Yo fade a big fan of urs do you mind me asking what music u used at 7:21? Its my favourite music. If you do, highly appreciated.
Fade bro when u want to use one- time-use moves then u gotta activate "No Awakening"
(This gives even these moves a cooldown so u can use it multiple times)
And some moves like Pinpoint Cut from Atomic's base need the character to be used
(Variants still work like Death Blow fail aoe and Pinpoint cut jump Variant. Moves with no other Variant like Atomic counter DON'T work without the character)
3:17 bro did his war cry😂
2:02 fade, what yo gun sound like?
LOVE THE VIDS KEEP UP THE GOOD WORK
1:38 got him right where I want him ahhh counter😂😂