Hello friend, I don’t speak Chinese, but just seen your configuration I learned a lot about it. Thanks for your lesson! I have some question about it: if we have L2 in conection, we will see some throubles if we add DHCP-Server in both sides... In this case, using VXLAN we have to set DHCP-Server just in one side. If we want to mantain two different LAN adresses, we need to set VLANs, or mantain to set manual IP's in hosts... I’m right? Sorry about my English, and best regards from Brazil!!!
Sorry for the super late reply. I hope you already have your solutions, but if not, I will try to give some advice. It is usually not recommended to have DHCP-server over VPN, so another way to solve this is to have dhcp servers on each side with the same subnet, but different address pool ranges and local gateways. You will also need to filter out the DHCP traffic over the VPN with bridge filter on udp 67. I can make a quick video on this in English if you need it.
![Kodak Black - Catch Fire [Official Music Video]](http://i.ytimg.com/vi/A4ch-olIuZo/mqdefault.jpg)
非常感谢！解决我一直困扰的难题，很实用！
谢谢
是VXLAN over WireGuard性能好 还是l2tp over EOIP 性能好？
我在两台ros上面建了WireGuard ，但是运行几天就会中断，登录ros后什么都没做，又恢复了， 已经反复很多次，所以就没有在使用ros的WireGuard 功能
郭老师 请问 公网对公网， 我使用EOIP 为什么速度 会跑不起来 ，而不用EOIP测速 能跑满，但是 我把两台路由 用网线直连 套了 EOIP的皮 就能跑满，一直无解，求科普
大佬，能出一期ipip内套wireguard视频吗 表示感谢
最近流行这么玩吗？
@@ZacGuo ipip隧道的加密端口经常会限制你一下，然后wireguard的udp一会就限速，
在想外用ipip隧道不加密，内用wireguard套一层，不知道这种方式是否可行
Up好久没更视频了呀
大侠，我办公室有两条下上行500M/70M的宽带，都具有独立公网IP，在家里有一条下上行1000M/70M的宽带，两边都是ros软路由，能不能从家里和办公室的两个宽带建立两个wireguard的隧道，然后把这两个隧道绑定成类似band类型的。扩大从家里访问办公室的带宽呢。
你这样最大也就是70/70的带宽。不能这样绑的，你自己再想想
看多了郭大侠的视频 好像对之前不能理解的现在好像有点感觉了
想请问下这个最小化配置下，广播和组播流量会透传吗？
Hello friend, I don’t speak Chinese, but just seen your configuration I learned a lot about it. Thanks for your lesson! I have some question about it: if we have L2 in conection, we will see some throubles if we add DHCP-Server in both sides... In this case, using VXLAN we have to set DHCP-Server just in one side. If we want to mantain two different LAN adresses, we need to set VLANs, or mantain to set manual IP's in hosts... I’m right? Sorry about my English, and best regards from Brazil!!!
Sorry for the super late reply. I hope you already have your solutions, but if not, I will try to give some advice. It is usually not recommended to have DHCP-server over VPN, so another way to solve this is to have dhcp servers on each side with the same subnet, but different address pool ranges and local gateways. You will also need to filter out the DHCP traffic over the VPN with bridge filter on udp 67. I can make a quick video on this in English if you need it.
請問zac 大佬，wireguard 隧道是不能跑動態路由協議嗎？
可以跑啊，没有问题
请问大佬，vxlan只能指定一个有线物理网口，wifi下的设备能否二层vxlan桥接上呢？
应该是可以的啊，无限网桥也可以。不过如果已经是一个二层环境了，倒不如直接用vlan来的快
MPLS over WireGuard 可以吗？
应该是可以的才对
請問一下你eve虛擬機上管理云如何多連內的路由器，它不是一個實體網卡只能連一台虛擬路由器嗎？
不是啊，那个云就是一个网桥，桥接到管理口上。连多少个设备都可以啊，就是二层的
@@ZacGuo 改天可以視頻說一下這樣連嗎？我連過第二個就報錯說已經使用了不能重複。
@@ZacGuo 另外你說的管理口是實際跟那云橋接的網口嗎？
vxlan和eoip哪个性能更好一些
不知道，哈哈。没有测试过
想问下 vxlan和eoip有什么不同点吗？
一個在 GRE 上跑(EoIP)，一個在 UDP 上跑(VxLAN)。
一個是 ROS / Linux 才支援(EoIP)，一個是新款的交換機也支援 (VxLAN)
如果单纯是为了ping，wireguard也可以。
的确，我测试了下纯wg也可以互ping
菜鸡看了不是太懂：因为两个路由器为代表的两个局域网络，虽然路由器被wireguard连接起来了，但是双方的内网设备还是没法通信？是因为二层和三层的关系？所以要把这两个不同局域网的设备放入一个vlan里？所以就借用了vxlan？