How to Make a Shaft Spine Finder

Поделиться
HTML-код
  • Опубликовано: 8 ноя 2024

Комментарии • 9

  • @jdbar014
    @jdbar014 3 года назад

    Spine finding a set of steel shafts, what position do you recommend the spine facing? 9 or 3 o'clock? Thank you

    • @HirekoGolf1
      @HirekoGolf1  3 года назад

      If you are pulling down on the shaft as shown and marking the top, then that mark either points to 3 or 9 o'clock.

  • @mikewohlwend3631
    @mikewohlwend3631 5 лет назад

    What size are the bearings and where do you buy them?

    • @HirekoGolf1
      @HirekoGolf1  5 лет назад

      Underneath the video is a description and at the end provides a parts list. It should point you to two different bearings. If not, let me know.

  • @wskripka1
    @wskripka1 6 лет назад +1

    How do you USE it ?

    • @HirekoGolf1
      @HirekoGolf1  6 лет назад

      There is a separate video. ruclips.net/video/_OIe6NLmKIk/видео.html

    • @Tiyopaengmo23
      @Tiyopaengmo23 5 лет назад +1

      @@HirekoGolf1 what size is the bearings? Thank you

  • @kennyg63
    @kennyg63 6 лет назад

    How do you use it?

    • @HirekoGolf1
      @HirekoGolf1  6 лет назад

      Here is the companion video on how to use it: ruclips.net/video/_OIe6NLmKIk/видео.html