are we supposed to add sd card? also i did everything but after powering up nothing happens, i have no clue what gone wrong, i used esp 32 wroom, the touch screen does not turn on
ps: I reprogrammed the esp32 and test it out in the webprogrammer terminal, it was okay , then i put it back in place and it also worked with the touch screen, but it still does not read sd card
I am tested with ILI9341 2.4" and for some reason, I can't use the touch. The display is working fine, but touch doesn't work. Someone have the same issue?
@@TCMSecurityAcademywish you showed each wire location as im a newcomer to all of this and even with the charts to help I am confused about how to do the wiring for the sd
Stuck on boot loop using v4 (old hardware) on ESP32 Wroom 32U model. It turns on and says - ''Giving Room for hardware Serial, Marauder v.1.0.0, Starting Serial'' Then boot loops. Anything you can suggest to help ?
Probably won't make another video but you can search for videos adding a lipo battery and charge controller to esp32s. There are lots of resources for it. - Andrew
Can I use this display instead please help (xcluma 1.8 inch TFT without touch LCD Module LCD Screen Module SPI serial TFT Resolution 128 * 160 Lib ST7735)
This most likely means one of two things, first the wiring from the esp32 to the screen is missing a connection or not wired correctly, second is the firmware did not flash properly. - Andrew
same for me, the screen is missing the 4 pins; i think he gave us the wrong link because if you look at it again in amazon, it doesn't have the 4 pins. But please let me know if you find a solution.
This most likely means one of two things, first the wiring from the esp32 to the screen is missing a connection or not wired correctly, second is the firmware did not flash properly. - Andrew
can you teach us how to develop an HID script in python but the script has to be advance one and these is for educational purposes only thankyou❤❤❤❤❤❤❤❤❤❤
Teach us how to make an marauder for flipper zero with antennas. All of maurauders are sold out so I need to build it my self
Amazon has it,,even thou they up the price lil..but it's there..
can you make a tutorial for the wirining please?
Can you wire up a CC1101, NRF, GPS and a IR?
Nice tutorial! Is it possible to add a calibration code for the touchscreen?
could you share where can i get the final wiring layout, i ll be soldering on protyping board with hookup cables
You can find it here: github.com/justcallmekoko/ESP32Marauder/blob/master/old_README.md#connections
Hello, can I use OLED display instead of the one used in the video?
Not sure! You may want to ask around on related subreddits - that could get you some helpful insight.
Have you found a Bruce for for this diy maruader? I'd kill for bmorcilis launcher and Bruce on this build
Where did you download the old hardware bun file when I click on firmware it just opens the same page
are we supposed to add sd card?
also i did everything but after powering up nothing happens, i have no clue what gone wrong, i used esp 32 wroom, the touch screen does not turn on
Yo I’m not sure but I think so he never says anything about it but I think it dose need the Sd card
Same here 😂... Wondering what is wrong..
ps: I reprogrammed the esp32 and test it out in the webprogrammer terminal, it was okay , then i put it back in place and it also worked with the touch screen, but it still does not read sd card
also it works without sd card 👍
Hello, can this project be run with a display whose driver is ST7789 or does it have to be LIL9341?
When it write GPIO23 MOSI SD_MOSI at the same line that's mean you have to connect it 3 together right? I'm confused😅
Sir please help i connected it but the display is blinking
What size pcb would I need to fit this perfectly
That's great Sir Andrew.
Would I be able to use an 8 DuPont header for the six that you used?
Yes, you also cut or snap them fairly easily. - Andrew
Any reason why you went with the ESP32S chip and not the D?
Скорее всего что прислали
I used a devkit that I had on hand, so no specific reason, although based on the documentation for the project any ESP32 devkit should work. - Andrew
I am tested with ILI9341 2.4" and for some reason, I can't use the touch. The display is working fine, but touch doesn't work. Someone have the same issue?
Can i also do it with a esp32 from arduino?
my esp32 wroom wouldn't detect help me fix this problem
Very interesting.
Request.
Pls show next time how to capture 4 way handshake. And later how to download it to computer from marauder...
Great idea, hopefully we can cover this in a following video. - Andrew
@TCMSecurityAcademy yes please ill wait 😊
@@TCMSecurityAcademywish you showed each wire location as im a newcomer to all of this and even with the charts to help I am confused about how to do the wiring for the sd
can i use a 3.5 inch tft instead
Yep, any tft that can fit
where is the WIRE map?
Sir how to make a mini version of it
Guys is that only for flipper zero? Bc im not sure that there is fz in my country
No this is it's own device
Stuck on boot loop using v4 (old hardware) on ESP32 Wroom 32U model. It turns on and says - ''Giving Room for hardware Serial, Marauder v.1.0.0, Starting Serial'' Then boot loops. Anything you can suggest to help ?
Fixed - In the end my power supply was not strong enough and I switched the cable. Everything works well now.
Glad it worked out!
could you help me with my wroom32u? i wired the pinout correctly but my touch is still not working
I bought the wrong type without touch. Can you show me how to connect it using the push button. Please😢
Could you show the wiring I don’t understand
Yes please! I wish he showed each wire one by one :/ would have been more helpful
@@pureh2oh92 github.com/justcallmekoko/ESP32Marauder/blob/master/old_README.md#connections - This could be useful!
github.com/justcallmekoko/ESP32Marauder/blob/master/old_README.md#connections - Might help a bit!
You have maybe the ony video that shows how to do (assemble) the thing and also how to work with it. Cool. Thx.
Subscribed and liked.
Thanks so much!
He lists all the all the affiliates links, but since he can't get a dime for the repo, he leaves that out in the description....
do we need to buy a sd card and if so what size and type?
SD card is not needed to run, but if you want to be able to perform captures or some of the features like the captive portal you'll need it.
It turned but the screen is white, please help
can you make another video of this but with battery?
Probably won't make another video but you can search for videos adding a lipo battery and charge controller to esp32s. There are lots of resources for it. - Andrew
Cost ?
sir can you gave schematic for esp8266
Thank you 😊
Can I use this display instead please help (xcluma 1.8 inch TFT without touch LCD Module LCD Screen Module SPI serial TFT Resolution 128 * 160 Lib ST7735)
U need touch display
Can you make this only esp32 and laptop connection? I have not other things. Please help me
I think there is a way you can and then access it via CLI but I'm not sure, check out the github link and readme for more details. - Andrew
could you use it without the screen
I think there is a way to connect via CLI, check the official marauder GitHub for details. - Andrew
Sir i face screen rotating problem
Keep getting White screen, cant find anything to fix this
This most likely means one of two things, first the wiring from the esp32 to the screen is missing a connection or not wired correctly, second is the firmware did not flash properly. - Andrew
my touch screen is missing the 4 pins and my female pins are too short what should I do ???
same for me, the screen is missing the 4 pins; i think he gave us the wrong link because if you look at it again in amazon, it doesn't have the 4 pins. But please let me know if you find a solution.
also, i haven't fully built it yet, but it seems those 4 pins are for the sd card. So, it should function fine without it is my guess.
@@yticarevwhat's the condition now bro
@@Martial_art_expert so yeah, the 4 pins are for sd card; if you don't use a sd card then you won't need the 4 pins. It works perfectly fine for me
very good video , thank you
Thank you
No need SD card?
SD card is not needed to run, but if you want to be able to perform captures or some of the features like the captive portal you'll need it. - Andrew
Make a video about ghost esp firmware
I did everything but the result is a white screen
This most likely means one of two things, first the wiring from the esp32 to the screen is missing a connection or not wired correctly, second is the firmware did not flash properly. - Andrew
Dang! Love this
this is great
Your neighbors aren't safe
can you teach us how to develop an HID script in python but the script has to be advance one and these is for educational purposes only
thankyou❤❤❤❤❤❤❤❤❤❤
👍🏼
First 🎉🎉🎉❤
Welcome!