HAM RADIO: Shack Rebuild: Radio Room Re-Build Just for fun........
HTML-код
- Опубликовано: 24 ноя 2023
- HAM RADIO: Shack Rebuild: Radio Room Re-Build Just for fun........
Please subscribe and like.
Cheers
Mike - M0MSN
P.S. do not take my word for it, give it a go for yourself.
Well done Mike. It always gets me how every time we want to make even the smallest change to the shack it has to look so untidy before the improvement!! 😄73 M0DCX
I found myself chuckling quietly as I watched the second half of this video. Remembering days in the mid 1980's when EVERYONE was a radio GOD...The amount of times i heard the GOD GIVEN EDICT that you MUST run Heliax or better from your radio to your amp or your radio would implode was astounding. If ANYONE back then had caught you using RG142 from the radio into the amp, you have been dragged through the village naked, tied to a post in the town square, stoned for a while, then possibly set on fire and flogged with a cat-o-nine. Of course, they had NO IDEA that RG142 is good to 1400v and 1400w under 100ft/100Mhz..and at BEST your going to run 75w down your 2m length into your amp to the get it's 1000w output...easily within the specs of the coax.
Good luck with the new setup. It sounds good so far. I am curious about the green angle bracket at the back of the desk. Maybe future extensions.? 😂
Nicely Done Mike - great stuff, enjoy the FT-DX10!
ALWAYS enjoy your videos here in Texas, Mike! I'm in the middle of rebuilding here as well. 🙂 73 from W5ODP!!
Looks good Mike. I need to do the same thing here. I ran out the horizontal space some time ago and have been moving up vertically. I need to thin it out bad. 73 Joe
You made light work of that Mike..if you have a spare day I could do with a hand to do mine 😊...I think NY day will be spent rebuilding mine. Great to speak today, looking forward to hearing you once the DBX Is in and running.
Grand job Mike , looking good!
Enjoy the new radio Mike. We all have the spaghetti (and dust) behind our desks LOL
Hello mucker. 990 for the win!! 😀A change is good as a rest. Hope you are well mate. Enjoyed the video
If only IKEA recognised the potential in creating a range for ham radio rooms (move over/qsy Billy here is the Over range). However, they may need assistance to show how much kit can be purchased and stored on a given amount of shelf space. I think that we as hams ought to offer our services to Ikea (others available?) at fitting a "quart into a pint pot!.
hope to get you and the dx10 into my log soon. 73
I do like a shack rearrange and although i love the DX10 i don’t think i would be putting the 890 to one side..I am actually interested how the two compare as the Kenwood has been on my radar for a future upgrade..73’s
Pedestrian Mobile 😂
I cant believe he hasn't heard of you!
I hope since you filmed this, you've put the Kenwood back in line! :)
Yo Mike - always enjoy your videos, and this is no different. Really enjoyable. [Aside - I know this is not the subject of this video - but how are the air-air heat pumps coming on now we approach the winter months? We have had air - water heat pump for 15 years so always interested to see how others get on ] / I have a Acom 1000 that has never yet been used in anger (I am 2E0MSR). Was supposed to get the full over a year ago but day job has just got in the way - must complete soon! / Great set up Mike. Mark.
I seem to be redoing my shack into different spots and configurations weekly. It can definitely be a lot of work.
Did you find any SWR difference Mike? Presuming you just swapped Rig for Rig (I know it wasnt that simple) rather than Coax changes etc.
Hi, nice video. I have the same setup (Ftdx10 and an Acom 1000) but I have not connected the amp yet. Need a cable from the 10 pin DIN to the Key in on the amp. Will get one tomorrow. What is your first impression of the FTDX10?