The REAL Reason to Hate Blackstar Amps (and others like them)
HTML-код
- Опубликовано: 5 июл 2024
- Help sick kids get SICK GUITARS: squishyguitarproject.com/
In this video, we will respond to a recent video by RUclipsr KDH of 'Audio Audit' fame. In his video, he defends Blackstar Amplification from detractors and attempts to debunk some of the common misconceptions surrounding the much maligned amp company. Problem is, he misses the REAL REASON to avoid Blackstar Amps like the plague that they are. This reason does not stop at just Blackstar either. There are lots of newer amps from even otherwise trustworthy amp manufacturers you should avoid. Knowing which is which can be hard to figure out on your own, so here are some general pointers.
Original KDH video: • Why do people HATE Bla...
SHOW YOUR SUPPORT
1: Donate via Paypal: paypal.me/guitologist?locale....
2: Buy Merch: teespring.com/stores/the-guit...
3: Send in Viewer Mail. (Contact Me for details at bradlinzy@gmail.com )
4: Purchase an ad! (Rate sheets available upon request at email above.)
5: Buy something from a sponsor and tell them I sent you.
6: Stand in the middle of the street naked screaming "LONG LIVE THE GUITOLOGIST!" Then when the cops arrive, tell them about my channel.
#RightToRepair #GuitarAmp #Guitar 
Наука
Most MusicMan amps were hybrid. Did Leo or any of his engineers have the insight to not install power tubes close to potentially vulnerable board sections? I've had a 112RD 65 since 1982 and never had a problem with it gigging 5+ nights a week. Any technical folks know or am I just lucky?
Your amp is a BEAUTIFUL example of how hybrid amps should be done. Tube sockets are chassis mounted and away from main board. ICs are socketed and easy to replace. There’s room to solder. It’s very well made. It’s a lifer amp! Your grandchildren will inherit and enjoy it.
images.app.goo.gl/HLWaaZKyNhp4Myze9
“Hate” was just echoing a headline.
Those MusicMan amps are cool.
@@TheGuitologist best intelligent response ever..go Brad
Everytime you listen to a great Credence Clearwater Revival tune on the radio your hearing a guitar tone straight out of an early hybrid amp. Kustom amps like John Fogerty used were hybrids too.
Holy crap!!! That took FOREVER to get to the point. Condensed version here:
1.KDH, is missing the point, Blackstar amps may or may not sound good, that’s irrelevant.
2.They’re poorly designed amps and prone to failure.
3. The company has no support centres in the USA (or maybe anywhere).
4. The company provides no resources to amp repair people to provide service to your amp.
5. Repair shops will not take them due to lack of resources (like schematics)
6. If you did eventually convince an amp repair person to work on it, it’d cost you more than the price of a new amp.
7. The guitologist has never actually phoned the company and we are not sure how much effort he has put into contacting the company besides scrolling their website and internet browser searches. Maybe he said he emailed once. We don’t know.
8. Take away, if Blackstar makes it hard to work on their products by such bad customer service, you’re better off investing your money in something that is more likely to be serviceable.
There you go, I just extended your life by a half hour.
I think i can do even better
Ehem!...
Don't buy blackstar amps bc you can't fix them, there hahaha
Legend
There are 10 service centers in the UK listed on the Blackstar website. And KDH was talking about his Series One amp, which doesn't have tube sockets soldered to a circuit board. Service in the US is done through Korg-US.
@@CaptainRon1913 would you mind providing some links? I'm really interested
i know a company that produces crap, overprices it bc they invest money to cribble a functioning product down to a paperweight, they FIGHT repair, not like not caring of making it possible, they will get after you just for talking about repair, they have service centers but you could throw 500-1000bucks in a river and watch it flow, that is less expensiv and more productiv and ppl still LOVE it. so this sounds a little bit harsh, they are just not good not intentionally bad just for jerking off to ripping customers. but i am not a guitar guy, i do not even knowb how i ended here.
I called Peavey and spoke with a gentleman with a strong southern accent who told me step by step how to modify my 20+ year old Bandit. And that’s PEAVEY.
What year was that?
@@TheGuitologist probably 2013-ish. I meant to say repair not modify, not sure where my head was at.
They did the same thing for me 10yrs ago about fixing the efx loop on my 6505+. Same thing, guy with a heavy southern accent. He was cool, gave me a few other tips too on modding that amp
@@christopherallen5603 That's what I call End User Support.
they emailed me a Valve King diagram in about 2002 i think they sent me my diagram / schematic not that it helps, quite happy to email a copy on to you buddy but i expect you already have Valve King schematics. Nice one Mr Lindsy.
I've been playing the shit out of my blackstar amps for years with no issues.
same. gigged mine hard, too. no issues other than standard maintenance/tube replacement. ten years old and love it.
I've been playing a ht60 mk2 and love it. It came recommended by a friend of mine who has 10+ blackstars. I asked him about this video and he just laughed and said he hasn't had any problems. He told me he had one serviced awhile back and doesnt remember it being an issue. This was click bait and we all fell for it.
@@ChristopherStandardTime There you go Christopher that’s your answer please see my comments above.
You will learn the hard way.
I bought so much stuff that worked for years and now I just throw 1500.00 amps in the trash because of 350.00 ,350.00 and 350.00.
Maintenance charges.
Yeah fuck this guy 😂
Jared James Nichols would like a word.
Cost money for a word.
Jared has direct access for all the troubles he has with his amps.
Look inside an old Hiwatt. That's what an amp should look like!
A DR 100 you mean?...still trying to find one
@@torahwarrior2442 check out Ceriatone. Hand wired replicas for about 1k usd. They have the 103 and the 504. The mil spec wiring is there looking at their circuit. The guy who builds them is a Malaysian electrical engineer who went to college in the U.S.
@@torahwarrior2442 DR103 or DR504. Have a look at the Mark Huss Hiwatt Amplifier Pages.
That's the gold standard bud. The only amp makers other than HiWatt who match that standard are HiTone, and Harry Joyce.
We don't have those in Australia.
Right to repair needs to happen!!!
Agreed. Across all forms of tech.
Every journey needs a first step. Like if you had replacement chassis for combo amplifiers would be a start , really there is no need in cutting down trees to make new 2x12 s when there must be so many out there?
Bashed in the gain pot on my Victory. Their customer service got me in touch with their tech guru straightaway, I had full schematics and they even shipped me replacement pots from England for free. Definitely a fan.
i have a HT 20 combo....has been bulletproof for over 10 yrs...BUT, I never play it more than 2-3 hrs a day, has an amazing sound clean or dirty, and the FX loop is awesome... but I understand why it would be rather tuff to repair.... thanks for the video... Kentucky proud here brother!!
All I can say is I bought a second hand Blackstar HT 50 and 4 x 12. I thought they were an American company but found out they were British, moreover they are based in my home town. I contacted them, they couldn't have been nicer. I took amp and cab up to them, they took 'em in, serviced both for a very competitive price and I'm really happy with the rig. Now, I realise I got lucky in their location but they were great for me.
I bought a pristine 2nd hand Blackstar HT Club 40 last week - absolutely love it. Played in bands for 30+yrs. Retired from it all now and play for my own amusement and at family doo's. I play only clean and the BS clean channel is superb, to my ears anyway.
@@redstrat1234 I miss my ht 100 for the clean channel alone. Especially the class a voice. None cleaner.
The thing about them is, they like to play the whole British angle and align themselves with the Laneys, Marshalls, Oranges of this world but dont actually build in the UK. im sure theyre great guys and the products decent and that where somethings made doesnt matter et al. but...why play the British company angle so hard but not actually build your gear here?
They have repair centres everywhere, this video is just bad information.
@@JunkBondTrader good amplifiers don’t need to be taken to authorised repair centres.
when searching for locations of service centers, you need to input a search. I did a default search of 'London' within 25 miles and got three locations
He didn’t want to find anything, he was simply out to trash the brand.
It's also not hard to find the USA Dealer/Service centers on Blackstar's website, but hey, navigating websites is hard for some people.
Ditto.....I did same. I live in Northampton and found a service center within 20 miles of my home. Doing a 200 mile nationwide search I found 18 service centres.
Brad, I can understand why you dont like Blackstar, but you are no better than the guy you are critisising by spreading untrue info about their service centres.
Can't use the internet but fixes amps? I'd hate to see him near a wall socket with a paperclip.
@@ProjectBlackweather LOL!
Love my Blackstar, never had any issues, from my HT1,HT5, IDtvP 60 and MK2 Club 50. How many Blackstar are ruin by tube heat ? Any formal info on the subject of failures or is it you're professional opinion?
I’ve a Blackstar HT 100, had it years. Bought it second hand. Gigged and recorded it for years, gigged loud with it too. Yes I had it serviced just because it’s good to have valve amps serviced. Never had an issue. Don’t be put off by this video if you have one, they’re fine.
I have a blackstar Id core 100 and love it my fear with buying a blackstar tube amp is the two hour drive to the closest guitar store and there are no electronic repair shops where I live when you say serviced I’m assuming you meant like tube replacement and general servicing no major work was ever required I’m asking because I like the blackstar tone and they’re affordable
@@darylbaker5620 tubes arent light bulbs,ive owned 20 tube amps,never had a tube fail in 35 years
That’s what I was asking grinned what he meant by servicing what is it that needs serviced I’m not fuckin stupid I know tubes aren’t light bulbs I’m asking because I live a long distance from any guitar retailers not convenient for me to take an amp in for servicing
I had the valves checked but they did not need changing last time around. I’ve not had them changed in all the time I’ve had the amp.
_GRINNER_
I’m a amp tech for 35 years in New York. I can attest that those amps are *not* fine. Sounds like you did basic maintenance on the amp by changing the tubes and your amp wasn’t dysfunctional.Very easy to pull out the tubes and replace them in even the worst built amplifiers.
When the time comes to actually replace other components in those amps, will be a different story for reasons including what was mentioned in this clip.
For example, the pots are soldered directly to the board. If you break one, that board will have to come out and that means complete disassembly of the amp. There’s also components on the board in amps built like that where the components really aren’t made to be unsoldered. Thus the board will be replaced instead.
Most manufacturers of amps like this only release boards to authorized techs. If the nearest authorized tech is in another state, how far is that from where you live. You might be shipping the amp to a authorized tech or trying to get it fixed locally by a unauthorized tech. As mentioned in the clip, they don’t released schematics to unauthorized techs.
You can probably see where gettin those amps serviced when the time comes to replace more than tubes could be a nightmare. Beyond tubes and maybe broken pots, I won’t work on them
Same reason my dad had 3 Chevy C10's from the early 70s up till the day he died in 2010. Easy service and pretty damn reliable.
Smart man.
Smart man your dad was.rip fine sir
Got a 79 .. Love it.
I've been gigging and rehearsing for about 5 years now with my HT Club 50 half stack.
Love my Mark 1 HT Club 40. Still running strong.
@@thestratman9 Same here, man.
I think KDH did a fine job of describing, from a very high level, the difference between amplifiers. He expressed an opinion. Your video also is expressing an opinion. Personally I enjoy Blackstar amps and have 3 Blackstar tube amps and one of their modeling amps. The bottom line is if you like Blackstar, buy Blackstar and if you don’t, don’t. For the record I own a variety of amps from Vox, Fender, Marshall, Orange, Laney etc.
This isn't just about taste. But Scott planned obsolescence. You can still buy it but I think you should be aware of that before you do so. That's the whole point.
What practice amp do u recommend... I need a Small 10 or 15, practice amp, for the road... One, I can plug in somehow to my truck...
Thank you...
Hey Brad, just giving you the heads up for fairness- if you actually type in the name of a town or city, the pins on the map will show up
I figured that might be the case, but it was asking for a post code, which I didn't have one offhand.
@@TheGuitologist G73,try that,it's Glasgow south and your local service centre will be shown,or not.And the whole thing sucks ass.
I’ve owned blackstar amps since 2013, never ever had a problem with any of mines. Had a series one 100 6L6 head, have my combo amp. Neither of them ever caused me any problems. I love how saturated and versatile blackstar amps sound.
Yeah same here pal,, I've owned a pair of Club 40 mk 1 amps for 6 years been using them on stage with zero problems just occasional tube change and bias that's all.
@@blakjack3053 my club 40 combo has never let me down either
@Baldspot they’re all great
I guess you're missing the point. When they go down, you'll be shit out of luck unless you send them to the UK. They will eventually break. It might be in 15 years but it will. These aren't like the old amps you can easily service and keep going for eternity,
@@megafauna7 the point is I’ve had my blackstars for years and years, they have never failed me. They are built like tanks. I’ve had my combo amp on for hours, it doesn’t get as hot as this guy says it does.
Totally agree with you!! same problem with my Brunetti few years ago, it was a pain in the as$$ amp, i need to send from turin to modena ( 300km ) beacause my tech couldn't figured it out how to fix it and Brunetti didn't want to send the schematic... For me obviously the tone is the most important thing, but i really want that the amp is reliable and well built, i've a Soldano HR50 that is a tank and inside it's so clean that you can eat in it, and also my 1978 Princeton reverb is a hell of a simple circuit and a monster of tones!! with both my tech didn't have any trouble to fix them when i had troubles. Can i ask you in your opinion and experience what are the most well built and reliable ( and easier to fix ) amps?? tnx in advance. Ciaoooo
I might make a follow up video to address your question.
@@TheGuitologist Great!! thank you!!!
Soldano(I prefer SLO) is great but lets be real. You compare one of the best and very expensive amp with like the cheapest entry level stuff. You get what you pay for. But you also mentioned you had some issues with them. They are easier to repair for sure.
@@hbo001 no issue with Soldano , i blow up a tube one time ( my fault, i didn’t change them), and another time it burned an eminence 1x12 speaker ( always my fault) , Soldano declares 50w but mine i measured with my tech is 80watt... so it burned the coil of the private jack... with the princeton ( always my fault ) during a rehearsal i take to 10 and i f&@d up the main capacitor in a 40 years old amp it could happen...In both case i’ve seen the amps opened and in half an hour i’ve them back. All the techs that i speech were pretty amazed by how good are both amps in terms of sound and circuit. Really a good construction and schematic is almost a work of art to see... For me , reliability is important almost ( if not most ) than the sound. I’ve to trust that the machine works, but every every every tube amp Will have some problems one time, it’s part of the game like the guitologist said in the video!!! they’re like cars, you can buy a bmw or a Ferrari and you can say that not now, not tomorrow but one day you will have to service it ( hoping for sonething not so serious) . The problem is not the failure but the chance to fix it, the brunetti MC2 is not a cheap amp ( i paid it almost like the used hr50) so i was very angry and i’ve to send it to the factory.. and the fixed failure last for 3 month. I’m always sceptical with amps made by big manufactures because they think only about money, hot rod deluxes, devilles, marshalls, peaveys ( all mainstream amps i think) they sound good but they’re built ( now) like Sh€&7, for example i really like the clean platform of a fender hot rod, i like they’re sound but i don’t trust them. Same thing about Marshall.:. I’d like to have a plexi but I’ve seen the interior of modern 1987 or 1959 plexi and they ‘re a mess... Otherwise it’s not explainable why great builders like Soldano, Bogner, carr, friedman, victoria, lazy j, metroupolos..feel the need to build newer version of already existing amps.. because the classic manufactures don’t built the amps like 40 or 50 years ago ( I know I’m old inside.. 😉) ... sorry for the long answer 🤗
What do you think of the Orange amps build/design quality? Specifically like a Rockerverb MkIII.
Just checked the Blackstar website and there would appear to be 20 in the UK. You do have to put a location in, though.
So I did a search on their US/Canada dealers, too, and you can find service centres by specific product. On one I picked, there were two in Louisville, Brad. So, it would suggest there are places to get products serviced. But, that said, some models showed no service centres at all. So it looks like if you buy a cheaper model, you may struggle to find someone to service it. Think of all the Blackstars that could be coming to you, Brad!
I asked Laney for a Schematic & they emailed it the same day
Same here with the Aussie Casio important....
That's always a good sign, and it's the MINIMUM of what we should expect as consumers.
Solid company from what I've heard. Used to have a VH100R. Loved it.
@@SakariKempas The Laney VH100R was an excellent but poorly marketed amp. It was everything the JCM900 should have been.
Good to know , thanks.
Would love to know your thoughts on the EVH 3el34 amps I use them and never had a problem with them they were used on the first album throughout...your thoughts
I have owned 7 Blackstars over the years and they have all been rock solid. I love how they sound and after hundreds of hours of practicing and gigs they have had no issues.
Some of my friends playing hand wired Marshall, Fender and boutique amps have had a failure here and there, sometimes during gigs.
Just sayin'.
That you didn't have a failure is good for you. But everything failed at one point and what then? Also you might just have been lucky. His point still stands. If it fails you'll have no means to repair it. I hate planned obsolescence.
What's the name of the band ( or bands ) you were gigging with, and what clubs/establishments did you gig, and when. Honest question........nothing more.
That does not change that fixing a blackstar properly if the ic breaks its impossible. When ICs fail you are up to the help of the manufacturer, even worse if it is a microcontroller, then you need the partNO and the firmware. The tube amps can be fixed 100% of the time, the ICs can't, and are much more difficult to trouble shoot. Digital logic is much more complex than your basic analog signal path trace and replace.
@@jbmw16 most ICs in this kind of amps are cookie cutter opamps or maybe switching logic. Easy to find and dirt cheap. Unless manufacturer is an ass and grinds off the label you are good to go.
@@KingKong-mp6gj I am more concerned with microcontrollers being used for menu functions. That makes repairs a pain.
Funny thing about that service centre map is that once you put a postcode and search radius into the form and submit it, you get markers for all the service centres. Including three in London (or at least inside the M25).
I have an HT5 with Reverb and I love that little amp and it sounds great.
had one ,one week....bland as f
We have the same amp and the same name.
@@bradharris1110 lol
That's all that matters, man. If it makes you happy, use it.
Hope you enjoy the chips!
This is just a question shot from the hip is the potential for overheating the main problem with blackstar amps or are there other issues to be concerned with besides lack of tech support
Hi man. I broke the headstock of my acoustic guitar last night. It didn’t fall off the neck, but there is a crack in it that almost goes to the bottom of the bottom tuner pegs. I’m just wondering if you can give me some advice. What should I do? I have taken off the strings to remove the tension, and I’ve put it in the gig bag and lent it against a wall, positioned in a way that keeps it from breaking any further. It broke from slightly above the nut on the back, to the bottom tuner peg at the front, so I put it with the front towards the wall. I think the truss Rod is untouched, the tightening bolt is in the sound hole, and it looks like a pretty clean break. Any advice?
Great video! You mentioned old Peavey amps, I played a club for 3011 consecutive days. It was so rough we (really) had the bar Logo on our issued Kevlar vests, the restrooms had no sinks or ceramic toilets, BOTH the men's and ladies restrooms had horse troughs to go in. Needless to say, we didn't take our vintage gear. I had a Peavey T-60 that kicked ass, and I played thru a heavily nodded first issue Peavey Bandit 50, by the time that place closed I could get any tone I needed from that gear. Of course I had a LOT of hours to tweak that tone. One night the security beat a guy to death (died on the way to hospital), the place was closed.. That gig ended in the late 80's, and I still wake up in a cold sweat dreaming about it. Wish I'd kept both guitar and amp.
Holy shit, what an awesome war story. From the working musician trenches.
Pfffttt, only 3011, wait til ye have ... ah don't matter 🙄
Lol so it took you 3k gigs to get a good tone out of peavey bandit?
@@TheGuitologist or.. the troughs even ; )
Actually it took a few months to fully mod that Bandit. Had push pull pots and we played a variety of styles, I could see next song on set list, turn around and push/pull and twiddle knobs and have a totally different amp. I moved away from Florida back home to Alabama, looked high and low for a first generation Bandit 50, found one broken for $40, did most of the mods I'd done to the other one. Went to a blues jam at a harmonica players house, he was an amp collector, had a wall full of tube amps. He saw that Bandit, insisted i plug into one of his amps in his collection. I told him I was set. He insisted use one of his, I insisted he STFU because he was getting obnoxious. At the end of the day, he bought that Peavey Bandit from me in 1999 and continues to use it live for his harp. I bought a Bandit 65, not same circuit with that TRANSTUBE crap. Still looking for another first generation Bandit for a reasonable price. After the mods It sounded surprisingly good and I used it for everything from bluegrass to metal, and it handled it.
I've worked on a few. Not that big of a deal if yer used to t-shooting SS stuff. I seem to remember the transistor based phase inverter being prone to cause problems.
The Achilles heal of most Blackstar designs is the phase inverter design. The early HT5 series were so catastrophic that the only 100% guaranteed fix is complete pcb replacement.
Are there any circuit board all tube amplifiers that are acceptable?
I have a 65 Fender princeton reverb reissue tweed from Sweetwater.
I play every day for 15 to 20 minutes daily and it's never above 3 on the volume.
What’s the problem with the Marshall dsl100??? I just bought a brand new one this week!
I had the same problem with a big Bugera amp, 333XL. I had it on my bench for a week... I gave up. The pedal logic circuit was cooked by the heat of the valves (apparently a frequent issue). The customer support was useless. They sent me back 3 emails with no help at all. No schematic available and so on... A situation very similar to what you describe in this video.
I don't take those in either!
I didn't have any issues getting a schematic for my 6260. Of course it's an older one and they now use that odd auto biasing and tube life system and I won't touch that with a ten foot pole specifically because I can't fix it if it breaks.
I said Blackstar was like Bugera in the live stream of this video... So true. Good luck man!
a buddy bought a Bugera and couldn't use it for months waiting for repair
If you want to go down the rabbit hole google egnater amp repairs and the absolute nightmare a lot of people are having keeping their amps running.
In a non related question,
What is the operating temperature of a power tube in a Mesa Boogie Triple Rectifier Solo Head? How hot will they get at different volumes?
Question: how are the tubes in a Blackstar mounted? Isn't it "base down" meaning the heat goes away from the PCB? My biggest concern about directly mounting to the PCB isn't the heat, but the mechanical stress when you go to change the tubes.
I just don't like the sound of Blackstar amps, to be fair. Problem avoided, then....
It's the Apple Biz Model 💩
Brad, I know you mentioned the Marshall DSL as having tubes built into the board but what about the DSL line that was revamped and released in 2018 (DSL 40cr). I was under the impression the tubes on this model are mounted to the chassis. Am I mistaken?
Hey Brad.. got me thinking, just purchased a bad cat the paw.. waiting for no.2 as unfortunately bad cat had a run of faulty voltage transformers in the early release run.. they are working hard to get the replacements out and it must have been a massive knock on there bottom line.
Would you be able to get schematics off ‘bad cat’?.if this little hybrid amp was to go wrong out of warranty? Would you be able to fix it??.What is your view on bad cat as an American amp builder, have I made a poor investment decision... I a,m aware that I have made a specific product decision and I am happy with the specification of the product I have chosen to buy... as long as it works the way god intended. Your brief thoughts would be appreciated.. long term UK subscriber... and re subscriber when you get Randomly unsubbed from time to time. Cheers
I had the HT-60 as one of my first amps before I learned any better. One of the pots broke off the front and Sweetwater ended up replacing the whole circuit board to fix one pot. It was covered under their warranty, but I soon sold that BS to get a Marshall and never looked back.
To be fair ... If you enter London in the postcode and expand the search to 200mi then a number of repair centers come up as available.
Huh...imagine that.
Yes, he was being intentionally deceitful, in this regard. Also, the website links clearly lead you to your service options outside the UK. In the US, that's through KORG USA. Intentional inaccuracies, like these, should cause viewers to question the veracity of all information provided by this channel.
Hey Brad. Speaking of schematics, I have the same Revere 16mm sound projector that you had featured with about 5 other sound projectors on one of your past videos. Id like to turn it into a guitar amp but I can not find a schematic or anything about it on the internet. Have you had any luck finding anything? Can I send mine to you to work your magic on? What do I need to do to make that happen? Thanks
Those projectors are WAY on the backburner ATM. I never tried to look for a schematic. And right now, I'm not taking in any mod jobs or conversions because of how long they take.
@@TheGuitologist Fair enough. If in the future you're thinking about converting a projector you should do the Revere first lol. If you think your going to restore the Revere projector as a working projector I can give you the parts from mine. I just took the amp out so if there's anything you want or need Its all yours. It came with an extra lens that is much bigger than the standard lens. It also has that extension arm for bigger reels. Its all yours if you want it, just give the word.
I just bought a Mesa boogie triple rectifier with three channels. It was $500 and it wasn’t working. So, I took it to my tech and it was $500 to fix. Its sound amazing and I love it but the thing gets hot. That being said, I never have the volume loud. Should I sell it now and make a profit and buy something else that’s better and cheaper? What’s your thoughts?
I'm an engineer, not an amp tech, and the only amp I've ever repaired was a Blackstar HT-5 a friend asked me to peek into. Luckily, the schematic for that is pretty easy to find, or was for me, and there are tons of forum posts about their known faults. Turns out some of their transistors are positioned so close to each other they eventually burn a hole and bridge contacts, leading to no output. Newer ones already have sinks tapped into the board between those two pins, but still shows that there are some egregious problems in their design. The HT-5 I worked on just had the pre-amp tube in the power section, and was missing the pre-amp, so it turned on, and both tubes are dual triode with the same pinouts and similar tolerances so nothing was damaged. Never touching one again.
IC designer here. There are different temperature rating the circuits can withstand. For instance automotive compoments. However, I dont think they use these as they are more expensive. Anyway, mixing tube sockets and solid state component on a single board is IMO not a good idea. In general, a double sided board with tiny smd components is hardly servicable. It is just meant to be replaced with a new one. On the other hand the products using them are quite reliable in compare to things like tube amps:)
I have had several direct experiences with PCB becoming conductive. The other problem mixing ICs is the voltage tolerances involved usually means they'll fail even quicker than an all tube design on the same board.
@@TheGuitologist Yeah, some cheapo board. But in general modern PCBs are way reliable than any Tube design can ever be. Just do this test take any electronics that have been collecting dust over 40 years (VHS, 8-bit computers, etc.) and turn it on. It will probably work. The same can't be said for tube amps. Moreover, you don't have to replace any IC components over 10years of usage. The same can't be said for tube amps and power tubes particularly. The cost of replacement is just equal to a decent practice combo like Boss Katana. So everything comes down to price. I also don't like that things are made disposable but they are dispose now before their actual end of life. For instance, cell phones. My daughter still has an old iPhone(second gen. with the same battery) and no issue. I have Certina watch where I have not replaced battery since 2005 I bought it. It has an ultra-low power chip I was working on its design.
Your last comment about voltage tolerance is not accurate. The analog ICs like op amps can have really big voltage tolerance in compare to digital circuits. Anyway, you can have good voltage(current) regulators for both to always provide correct voltage. Just look what are the voltage steps for controlling the CPU when you want to overclock it. The voltage is always there no matter the voltage in power socket (no extremes like blackout of course;).
On the other hand, the rectified voltage on the tube anodes is changing way more with the voltage fluctuations from power mains. And as you know it has an impact on bias thus the sound. Nothing critical but good to know when you want to have a consistent sound for each gig.
Im having troubles with a Blackstar ht stage 100 mk1. I went to the blackstar amp aprecciation group and contacted Paul Stevens, main desing engineer of blackstar amps and he told me to change tubes.
When the problem is the IC11 that manage the clean and distortion channels.
I h4te blackstar costumer Service, they build things and dont even know how to repair them, sell and forget is their message they are spreading to the World.
Dear Mr Brad The Guitologist in my book there’s absolutely nowt wrong with being a good old fashioned mean old curmudgeonly slagger. BTW are Marshal Valvestate 8080’S combo amps hard to work on ? I’ve an earlier version, it’s under a pile of other shite, it’s the one without loads of effects except reverb and a boost channel peddle ? Are they any good ie versatile or is it a cheap half way house gimmick? Anything I could do to upgrade it ? It has a bit of a loud input (intermittent) buzzzzhum, but it could be my crap cable or guitar socket. I hoping it’s just dirt, my life long companion. As for the Blackstar brand I may well be wrong but I thought it may be an off shoot or idea of a guy who’d worked for another brand like the resurrected satsuma/tangerine brand. I used to go down the library and read the expensive glossy monthly guitar mags and find lovely articles about lovely stuff for lovely prices made by all sorts of lovely people, and do thoust know ? Absolutely none of it was shite...Iggy Pop’s only 5’1’’ an he wishes life was sweet as magazines, me too. I seen Highwatt are another resurrected Brand, what’s the word on them? 🤤Int it grand it’s a brand.....🤮and it’s probably come all the way from Vietnam, or North Korea.
dafuq?????
Brad do you think Op Amps in the signal path would mess up the tone of a tube amp? My Crate has two placed between the tone stacks and the inverter. I guess to isolate the send and return jacks which are inserted between them. It just sounds kind of muddy especially on the high gain channel.
Anything in the signal path effects the signal. So yes.
A lot of companies are "innovating" by making things cheaper for them to produce so they can sell them for larger profit margins while pushing out an inferior product. This is true in ALL areas of electronics currently.
I want to make an amp company, but I'd for sure be making hand-wired amps the way vintage amps were made, and if I used PCBs I wouldn't be putting tube sockets on them. I think a lot of these modern amps are also way too complicated both inside and out. Makes troubleshooting a complete pain in the ass, especially when most of the companies refuse to give schematics for the things. Kind of hard to make any money on a repair also when you have to spend a 40 hour work week just tracing a circuit and drawing out a freaking schematic before even troubleshooting the thing.
What's a tech supposed to do? Bill the customer the entire cost of labor for drawing the schematic? Would cost more than rebuying the stupid amp!
I have designed PCBs for 40 years. I completely aware with Brad. Avoid any company that will not provide a schematic.
I have to for a big American corporation.
And did you see when he ate his words and found a schematic first attempt ... are you in reality ????
@@thesojourner7722 Apparently you didn't watch the whole thing. It was labeled Blackstar but it was a Peavey.
Apologies... just didn't enjoy this dudes energy ... all the best and peace to you :)
@Undercoverbus agreed. A lot of these comments are clearly worth fuck all. The rest are people saying they have blackstar amps for years and not had any issues. It's not exactly common practice for Marshall and fender to publicly release schematics either so that's a bs argument too.
I'm looking for my first tube amp with 2 channels and about 50w. Kinda Marshall/Peavey or, erm, Blackstar.
Pheraps a combo, same specs with a 1x12"
Could you recommend some solid models, which are easy to repair and sound good?
What amps do you recommend?
Orange is the same. I recently contacted them for a schematic for their Dual Terror and I got the same answer, that they will not provide schematics on any of their products to anyone.
Stop buying their shit. If we don't punish companies that do this it will become the industry standard before we know it and guess what! We'll be screwed forever after that.
@@TheGuitologist I agree.
@@TheGuitologist I play blues and rock. what amp should i buy for practice?
Then their product is inferior
Here's their email to me.
Orange have passed on your enquiry to us as we are the Australian Distributor for Orange products.
As per our company’s and the suppliers policy, service information is not available for public distribution.
Please let me know if we can be of further assistance.
I’m starting to think vintage amps may just not be all hype after watching this. The inside of that black star looks like the inside of a DVD player and not an amp lol. Can you recommend a good 1x12 that won’t get me divorced due to volume or how much I have to spend on it? I prefer fender tones.
Of course they aren't. It isn't about "collectibility" for me. It's about the longevity of the product. A vintage amp properly cared for will offer MULTIPLE lifetimes of use.
Fender Supersonic 22 sounds pretty good to me, if you're into the higher gain side of things.
thats what i thought lol. it looks like those cheap sears audio centers with the radio, casette, record player,etc all stacked on top of each other xD
Build one. A box is too easy to build and then a small tube amp to go in or on top dunno.
You couldn't get cheaper than that and you could "bring up" the gain as you build it and avoid any unnecessary litigation.
hey, thanks for the video, i was worried about the tube in the board heat problem you talked about. i have a prs mt15 that just broke with less that 2 years use. the power tubes are outside the board, but the pre-amp tubes are board mounted directly, should i be worried? is it a thing of lunchbox amps?
Preamp tubes are less of an issue with heat, but it’s still not best practice to board mount tubes, IMO. You get what you pay for usually.
@@TheGuitologist Thanks! ill defenetly keep that in mind when "shopping" for a replacement amp
I wanted to get a decent "lunch box" amp for practice. Was thinking of the Marshall dsl 20. But maybe not due to heat issues. Does anyone recommend anything?
My Blackstar HT 60 Soloist has been running strong for over 11 years now. When it dies it dies but I've gotten good use from it. Enjoyed your perspective and education on the Blackstar build.
Blackstar and every other amp builder is doing the same thing. Most newer designed amps are disposable. If we're lucky we'll get 10-15 years out of them.
It's no different than appliance and other electronics manufacturers. A fridge doesn't last 20 years any more and you can't buy the parts to fix most of them.
None of this is great but seems to be normal now.
The old designed valve/tube were built with components you could, and still can, buy off of the shelf.
The subtitles said hey there brad the catologist. I love it
Brad The Scatologist.
Brad, in some of your older videos you had this awesome portrait style poster of Johnny Cash. Where did u get it from and what happened to it?? Been trying to find one but jst cant...
That’s an oil on canvas. Bought it and my Hank Williams oil painting same day at a pawn shop.
@@TheGuitologist Hand painted, thats awesome! It would be so appreciated if you could maybe give us a closer look at them in an upcoming vid?
Is the bugera infinium? Which bugera would be the better?
Blackstar like alot of cheap amps out there are great bedroom amps! When it comes to troubleshooting shipping and cost of repairs, throw away and buy another! It's a throwaway amp!
*UPDATE*UPDATE*UPDATE*
Hello folks! Ok so I wrote this over a year ago, and after watching several videos it peaked my curiosity. After a little searching I picked up a used Blackstar HT40 combo for roughly $300 I figured what the hell! It was a nice sounding amp. Worked great for roughly 3-4 months. First issue was I had to replace tubes but thats normal, tubes go out. Well then it ate another set of tubes a month or so later🤤🤔 afterwards it started randomly making unholy noises like it was shorting out this made it unplayable. Anyway long story short im not a tech so besides fuses, tubes and pulling out the chassis and looking for obvious burnt spots or shorts I was at a loss. I ended up selling it to my buddy for $40 who wanted to take on the project. So ya what I originally wrote came to fruition. Kind of funny actually👍🤙 anyway it was worth a shot I had fun while I had it overall it wasn't a bad amp for it took a crap.
Absolutely bullshit
@@mahoganymarco9199 Agree
Yes, Brad. I completely agree with your Blackstar observation. I was working on a S100 head. Painful, but at least I had a schematic. I got the f**ker going ... but to put the chassis back into the head cabinet nearly caused me a meltdown. Why? My normal-sized arms could not fit in the cabinet to attach the screws. I had to wait for my (petite) partner to get home for me to guide her through the assembly process. WTF!!! I have never heard of this shit before in my life. Another loss of income repair. I am almost at the point where I will ask "does this amp have ribbon cable?". If yes, throw it in the corner with Triple Rectifiers, 410's, TSL's and strike a match.
Yep. Problem with where you live, Oz, the prevalence of old, good amps is probably not high enough these days to rely on only those repairs. Or am I mistaken?
@@TheGuitologist Pretty damn close, Brad. We have quite a lot of old Fenders from Blackface onwards. A reasonable selection of Marshall and Vox. Unfortunately, too many Mesa's. Very few old Gibsons amps. In short, we thank God for the Hot Rod series, and Bjr's for their contribution to cash flow. :-)
@@theguitaramptech I've had both of those on the channel.
Budda SuperDrive 18 twin can you work on or familiar with ???
So what would be a good amp in the 5-6 hundred dollar range?
Just give me a loud, clean and old tube amp....I’ll do the rest.
Like what precisely?
Exactly. You can pick up a silver faced fender from the 70s for half the price of one of these black stars or bugeras (Chinese made IC trash) and it will put them to shame. And that’s when fender wasn’t even building very good amps!! 🤣 My blackface fenders have no equal.
I made a 5e3 amp for under 300 with speaker and cabinet. And to get it more clean I used rob robs negative feedback circuit to give me all the clean headroom for me to use my pedals. And with a flick of a switch I am back to my tweed distortion. Best amp I've ever used.
@@codpug Just ordered a handwired 5e3 from Lil Dawg. I can't wait. I've been scouring Robinette's site and will be doing some mods.
@@JInfinity7 I did a ton of mods but after a few years removed them all but a few. I left the diode to protect the 5y3 tube. The switchable negative feed back so I can have more clean to use my pedals . I separated the grounds from the preamp to their own. And I highly recommend a humdinger for the heater wires if they dont have it on yours, Makes night and day difference in noise reduction. Other than that I just plain love the tweed amp sound.
I've bought myself a '66 Fender showman head ten years ago and never looked back. In fact my tech loves to service the thing and always offers me a cup of coffee whenever i'm around.
Tone Master in my opinion are the best. And Fender Twin Amp. Best
Would you work on a Madison Divinity tube. Amp?
6:49 I am trying to figure out the bridge, fretting and intonation on his guitar. It's cool!!! But I'm having a hard time both seeing and figuring out what's going on here. Are his frets offset going up the neck? It looks to me from the 12th fret on they are offset, if so, how is the intonation correct on the 10th fret for instance? Perhaps they are off set all the way up? I can't really see the nut end enough to tell what's going on. I'm sure someone knows? Thanks
I'm glad I'm out of the repair business. I don't like messing with anything made after 1980. There needs to be Right to Repair legislation. It's financial suicide to spend time reverse engineering a piece of equipment because the documentation is top secret, then, just to find that the problem is with a proprietary chip or worse yet, serialized or needs to be programmed with code that is also top secret. It just is not worth the effort. Just walk away. They all wind up in a landfill anyway, that's the manufacturers intention from the get-go.
serialization is coming to everything. Apple and John Deere are just the beta test for this.
@@joepeezy4sheezy They will put serial numbers on every part in a device and have a central CPU or basic BIOS chip to which everything has to be factory matched. Apple makes it so if you buy an iPhone now, a new one, and you try to have the screen or some other part like a jack replaced, the phone won't fricking work! Look up Louis Rossman's channel and "Right to Repair". They also do this same crap with John Deere farm equipment and it's becoming a huge issue for smaller farmers.
@@TheGuitologist i believe the EU just passed legislation about spare parts beeing mandatory available for a 10 year period ,not sure if they only had computers and parts in mind but it applies to other tech products ,and i hope they can adjust this and lengthen that period for things like Amps
My Blackstar has been rock solid. Sounds fantastic and never a problem. Granted I do use it as a practice amp and gig with something else, but I also practice all day on and off and leave this thing on for hours on end, and have even left it on overnight several times after too many whiskys. Never an issue. It gets a ton more use than my Firehawk/Headrush gig setup. Don't know about working on it - not my jam, but I do know I've never had to have it worked on so there's that. I even bought a second, smaller, more portable BS so when I vacation I can take it with - again no issues. I don't doubt this guy knows a lot more than I do about amps - but seems to be a bit of a hatchet job here. I'm sure faults can be found in any piece of gear or the company behind them. Do Blackstar sound good? Hell yes. Are they easy to work on? Apparently not. Are they reliable? So far yes, absolutely. Would I buy another? Yes. Would I like something better and more expensive? Yes. Can I afford that? Fuck no.
I never heard you talk about Peavey amps. You got any opinions on them?
(Especially the '90s USA made 5150/6505, Triple XXX, Butcher, JSX or the newer chinese made Valveking and Windsor)
Watch the Peavy undercover boss episode. Really has all you need to know. They sold out and went to China. They used to make good stuff, but not anymore. Satch probably went back to Marshal due in part to this. It seemed to me like the owners lost passion for the product.
@@duanecook4227 I wasn't aware off that. I will watch it.
But staying in the US isn't always a the solution, see Mesa. Marshall is manufacturing most stuff in China/Vietnam.
Peavey stuff from 80s and before is bulletproof and serviceable. 90s peavey starts to cut corners and begins sliding downhill.
70s-80s stuff is awesome.
Where can I find a list of completely tube amps as in zero solid state?
I got a HT club 50 10 years ago as a back up. It’s outlived my other amp and still going. I thought it was reliable, but now you got me worried!
Don't worry! This is the same guy that got drunk and made a video at 3 in the morning claiming Rick Beato is an industry plant. My Blackstar is 10 years old and never had a problem.
After watching a couple more of his videos I feel my comment was unnecessary and very negative. I was making some unfair assumptions and have since realized this is a good guy with a big heart. I'm leaving my original reply up in hopes that if he read it he will read this and see my realization that I misjudged the situation. Please know I'm sorry for making the comment. I don't agree with the thoughts on Rick B still but that doesn't mean he's not a good guy. I do think his issues with blackstar amps are fair as well but I still think they're good amps. We can disagree and still be respectful of each other.
I owned an HT 60 and gigged out with it for about 3 years regularly. Loved the different tones and the fact it was a 3 channel amp. Until the night it quit on me before a gig, luckily had a back up. When I took it to get it fixed, they could do nothing for it, the only way was to send it back to the company because blackstar wouldn't send the part and it would have cost more than what the amp was worth to ship it back to the company. Lesson learned and I bought a Marshall and have had it for 10 years now. Tube is the way to go, much cheaper to fix! Great video Brad!
Brad didn't show "KDH's Series One tube amp" as an example. KDH's tube amp circuit design picture is right on the front home page of Blackstar. There are NO tube sockets soldered on a circuit board.
Thank You! Very Informative! I also own a BStar ID series and , but did NOT know this info!TY What are your thoughts on the Peavey 6560 power head? I have been thinking of getting one ! Ive had the first run of the Butcher 120 and many smaller amps, including the VooDoo Crate 100, but I really like the energy from the 6560! TY
I’ve had my HT Club 40 MKII for years now and I’ve played it daily at high volumes for hours and I’ve never had a problem with it, maybe I just got a good used one? 🤷♂️
It took me 2 months to get a transformer for a Fender Bassbreaker 007.
I don’t know if Fender is any better these days.
Also, no Schematics, same story as Black Star.
All their pots are placed on a single PCB. With so many boutique Fender builders providing hand wired top notch circuits at about the same price, I would never buy an amp from Fender nowadays.
I had an HT40 that I absolutely loved. The sound was there but the reliability was not. It would start losing volume and crackling and popping after the first set during gigs. I sent it back under warranty three times to be serviced and it wasn’t fixed. The circuit was great but the build quality was not. I ended up getting rid of it and replacing it with an old Marshall JTM 60 combo.
I have JTM 60 and 30 watt combo amps. They are great amps in my opinion. They do need a small fan in back to help keep them cool because of a bad design, but they sound fantastic! They have started to go up in value because people are starting to find out great they sound. About 20 years ago, I paid $185 for the 30w, & $200 for the 60watter. They are worth about 3 times that now.
@@cantyouhearmeknocking1961 There’s another mod in lieu of the fan; just a shield between the tubes and the chassis. It’s because the tubes are sideways and under the chassis so heat radiates upward.
@@vayabroder729 Exactly. I have that mod on both as well. I did that first, but I ended up installing a 'computer fan' in each amp ,& I have never had an issue. I used to play in the Alabama/Atlanta areas quite a bit, & it is just soooooo hot & humid, that I installed the fans just for extra protection. Thankfully, I never had an issue with either one!
Have a Blackstar Artist 30. Is this in the same category?
I know is oot....what about the jcm800 2203x the reissue one? Is it easy to repair if it broke down one day...
Its really important for me, because amps were expensive in here Indonesia
There appears to be 14 service centres for Blackstar in UK and looks like Korg USA look after Blackstar products there.
That was my conclusion, too, but I tend to prefer simplicity when possible, so I agree with his fundamental point. Too bad he wanked out there at the end.
For UK Service centers to show up you have to type in a city. There are 3 in the London area.
Not rocket science, is it !!
only 3?
@@frigglebiscuit7484 there’s other in the UK. If you’re in the US you don’t real understand how small the UK is. London is big by their standards, but if you compare it to say DFW, NYC or LA among others it’s not very bigArea wise.
Yeah we have a repair centre in Milton Keynes. Not a Blackstar fan myself but yeah there is plenty of places for repairs in the UK.
Dear Guitologist, can you please give me your expert opinion about the HT-5r amps? After viewing this analysis Its obvious why the larger combos have problems and the heat from the output tubes damaging the more sensitive transistors makes complete sense to me. But, I'm curious if the relatively small output tube in the HT-5r (think it's a 12bh7? About the same size as preamp tube) be small enough to not produce enough heat to affect the circuit board components? I love these combos and with a speaker upgrade (I used a mojotone greyhound 12, sounds great in this amp) and a couple soft clipping drive pedals and these amps really sound great. Previously owned one for about a year and loved it, no problems. I also had an ht-40 that was ok but a true piece of shit compared to the HT-5R. I've watched your videos for a couple years and learned a good bit and recognized that you are very objective about gear and proven to be technical expert. I want to replace that HT-5R with another one.... But i want something reliable too. Is heat gonna be a problem even with such a small output tube? If you could give me a thumbs up or down, I'd greatly appreciate it brother.
Preamp tubes generally won't generate the heat of output tubes or rectifiers, so it's less of a concern, but I am just going on recent experience which has shown me that as some PC boards age, they can become conductive, and I think even the small amount of heat generated by preamp tubes can in some circumstances aid this process along. It depends on how the amps are mounted in the chassis, how much ventiliation is there, etc. I look at all the real amps you can buy for the $550 price point of a new one and wonder what would possess someone to buy that amp instead of one of the 1000s of vintage point to point amps without all the SMD and PCB stuff for less money and then just use pedals for whatever overdrive sound you're going for. I think maybe I'm just the wrong guy to ask on this one. I'm not trying to dog a company unjustly here, I'm just a practical-minded guy who likes to be able to repair his own stuff if something goes wrong, and stuff that's built like this are not repair friendly. That's my opinion. Take it FWIW.
@@TheGuitologist Having a true point to point tube amp would be ideal. If I went that way I'd buy a kit and build a tweed deluxe circuit amp. That way I understand how it went to together and how to repair. I've got one of those monoprice 5w tube combos (12ax7/6v6) and a Set5 combo (12ax7/el84) and neither have any transistors on them, but they are pc boards. They sound decent with an ext 12" cab but I don't trust them enough to get attached to them either. I've got on old red stripe peavey studio pro that I had to drag out because the Bugera v22 I bought brand new in 2021 started malfunctioning on the V2 el84 (swapped the tube out with several others and still does it) and kinda pissed.off about it breaking after only 14 months of use. The thing is that amp sounds really good, change the tubes out for JJ and break in the turbosound speaker and it sounded amazing for $399 brand new. But it's got lots of transistors on the board, hence why I think you're correct about the durability of this type of amp. The Peavey is 20 years old and made in Mississippi, and it still works like brand damn new. But it's not a tube amp, sounds like a tube amp tho for the most part, but it's a PC board amp but no valves. I'm permanently disabled and on a fixed income so I need something that either don't break or something I can fix myself cheaply. Plus, there is no good place where I live to get an amp repaired. But I'm thinking I may eventually get a tweed deluxe kit, one for the guts is as cheap as $250-$300 and build my own and therefore I can fix it if it breaks. I can't carry the heavy bugera to the post office to ship for warranty work at sweetwater so I'm thinking of just learning my lesson and remember that there is a reason amp techs don't like these types of amps and just let it sit in my living room and remind me not to buy another the piece of shit.
Thanks for taking time out of your day to respond, I appreciate it.
Hi,
Fellow Kentuckian and longtime fan. We defer on politics, but that's how it goes. - Curious what your take is on Mesa Lonestars. I have fallen in love with mine. It's on PCB, pretty sure the power tubes are directly mounted, but everything is fairly spaced inside? Plus it has mostly discrete parts, which I've heard you get on about. Will my heart be broken someday for similar reasons here or could this thing really make it awhile?
I loved my 'lil HT-5 amp head. Perfect at home amp for me. Never failed, but like most gear I acquire , the shelf life in terms of using it and getting maximum enjoyment from it starts to wan , ... a couple 2-3 years at the most, then I like trying other stuff, so serviceability of it , etc is a moot point more or less. Probly think differently though for a gigging , bigger amp and be more concerned with it's realiability etc.
I currently own a Blackstar HT5R mkii combo amp.
Hey guys, just trying to help out with some useful information as I’ve used most brands on international tours over the years and Blackstar for the past 7 or so and they have been more reliable than anything else so I was surprised to watch this video.
But here’s some useful info for you.
Blackstar has a global network of authorised service centers, these are accessible in every country that the brand is distributed in.
As amplifiers tend to have dangerous voltages inside Blackstar do not publish circuit diagrams in the public domain, Blackstar don’t want to encourage end-users to open the equipment. As part of global safety approvals, all Blackstar products are sold as having no self-serviceable parts and therefore for safety reasons they advise you get your amp repaired at an authorised Blackstar service centre.
If you are based in the UK, enter your postcode or city into the box within the UK service center section of our website and hit search. This will identify a list of local service centers.
If you are based outside of the UK, you can contact your point of purchase (i.e. dealer, online retailer) who will advise where your local service center is located. Alternatively, you can contact the Blackstar distributor in your territory who can advise your local service center. www.blackstaramps.com/uk/distributors.
To quickly locate USA service centers you can use the ‘Service’ section of this tool from Blackstar’s distributor (KORG USA) website www.korgusa.com/BlackstarDealers
Blackstar is a small, owner managed company with 35 hard working staff based in the UK who are committed to customer satisfaction and from my personal experience always welcome all feedback. Just contact them at enquiries@blackstaramps.com
Exactly 👍🏻
Great amps never had problems with any of mine
This reads like a press release. Blackstar should make US service location easier on their own website. And they should drop the ridiculous protectionism on the schematic front. Cloaking a company policy in a non-existent legal rationale doesn’t fly. I will continue to persuade my audience to avoid products from manufacturers who do this. People have a right to choose to assume the risk of repairing their own products or making the decision to take those products to their technician of choice. I see you're a Blackstar artist. Nothing wrong with that. (You are a great guitarist, by the way!) But you do realize they are going to give you gold star service as a result of this? www.blackstaramps.com/uk/artists/profile/michelle-taylor
@@TheGuitologist I simply put together info that people that I felt people should know and not just the false picture you are painting from your armchair. I actually use these amp regularly and have done for years.... do you?
@@MichelleTaylor1 Very well said. He fails to mention that these amps won many industry awards for design and innovation not to mention retail awards etc he obviously has some grievance with the brand.👎🏻
When I was shopping for an amp about a year ago I was deciding between a Blackstar HT40 and a Marshall DSL40. I’m so glad I. Hose a second hand Marshall. I changed out the C19 all by myself to tame the treble and now I love it. Sure the preamp tubes are mounted to the board but the power tubes are mounted to the chassis, and as far as I can tell it’s an all tube signal line. Looking at the later modern DSL40CR on some RUclips’s though it appears that’s no longer the case with ICs all over the board and all tubes mounted directly to the circuit board much like those Blackstars. Im so glad I didn’t get one of those at twice the price either because I nearly did. Still struggling to find a circuit diagram though, so maybe Marshall is headed in the same direction. Anyhow I think I’ll look after the one I got because I suspect the newer ones aren’t as reliable or fixable.
what amps do you find that have the least repair needs and easy of repair..
My first bigger tube amp was a blackstar ht-40. I played it and a few others at the guitar store. I was still fairly green, but my ear was telling me the Egnater Tweaker (yes, they have their own issues too) sounded better, but for some reason all the Blackstar hype and the salesman sold me on the Blackstar. I regretted it afterwards and still kind of do. I can dial in some great tones with Blackstar, it's got some decent gain voicings, but I never really liked it all that much. Had to throw an EQ pedal in the FX to shape the tone at all really.
Ive owened an ht 100 for about ten years and luckily haven't had any major issues. Ive changed the tubes twice and it was a chore to find out info just on biasing.
Same here with a club ht 40..also my dark/ light reverb switch never worked right since new.i had to replace that.found a hand drawn schematic some one took the time to do.i imagine this is only going to negatively impact blackstar, mb they will change their minds, and give us the darn schematics..
whats your opinion on PRS ARCHON
Will it chug?
Had a black 2 star about 5 years ago, really like both it at first. But a few weeks into owning each I dumped it and bought an Orange. I love my Orange. I thought the Black Star sounded brittle and thin for my tastes. With all the controls it had, you’d think I could dial in a tone. Can’t recall which modeling can’t recall which model that all tube one was, so then I then tried their hybrid one, the one with the Tube emulation and it actually sounder better than their actual “all tube” amp. So I don’t know, I guess trust your ears and don’t fool yourself. Ive had JCM 800, 900, triple X, mesa mark4, orange, liked them all better than black star lol
Still using a HT Club 40 from 2010 with no issues. Brilliant amp
Mine is from 2011. Still going strong.
Come back when you DO have an issue, and have it successfully fixed.
@@threepe0 Would be totally redundant at that point considering me and many other Blackstar buyers have got more than our moneys worth and had it over a decade. If it breaks now its not even worth getting repaired
@@threepe0 My HT100 was dropped off the back of a truck, in a road case. Took it to a repair shop that they fixed right up. Been playing it for years with no more issues. The case needed to be bent back into shape tho. Don't understand all the self righteous whining about BlackStar. I have more than one and in nearly a decade thats the only problem I'jve ever had.
@@threepe0 considering what it cost and how long it lasted it was money well spent. IMO
Brad I really respect your opinions and would like to know what you think of my current amp. It's a Soldano Astroverb. A single channel 20 watt combo with a 12 inch Eminence speaker. No frills. It is built with a PCB and tube mounted sockets. Never given me a problem and can only find one repair video on line where something had got spilled into one. I bought mine because I'm 67 and my Fender Quad was too heavy to lug around. PS my brothers original early seventies Orange 80watt combo was built with a PCB and it still runs great.
What’s the difference between production valve amps and let’s say a Dumble amp?
I've had to fix some Blackstar amps. They sounded OK, but I didn't appreciate the "Value Engineered" Build quality.
The value is in Blackstars pocket not the customers.....LOL
@johnny rotten there's a market for everyone. not everybody gigs, for some its just a hobby. You can keep your Marshall 100 watters, been there done it son. think of other peoples opinions for once instead of your lonely old self! I bet you have NEVER had a Blackstar amp!
@johnny rotten Some models yeah... but there's some that are loud enough for stage. Loud enough yes.......reliable enough.....not really.
So I did type in a post code and it did list about a dozen black star service centers in the uk. I'm not sure if you can get in touch with someone and actually get a schematic but it's a start lol
There's a guy having an electronics workshop in the building where my computer workshop is located. I've seen a Blackstar HT5 chassis laying around in his space for several weeks. He told me about it, think it was an intermittent sound/noise issue and a serious pain in the ass to troubleshoot. Not sure if he ever managed to figure it out.
best,easiest way is to trash it
UPDATE: He recently managed to fix the amp by replacing a burned-out resistor somewhere in the power amp section and replacing the 12BH7 power tube.
Brad, do you got a list of like, best affordable good amps ?