Helo dear, i have countered an issue with battery, AAA battery (1.5v) giving low battery when any of one cell goes to 1.3v even other on is 1.5 or 1.4 doesn't matter, i wana use rechargeable battery but it has 3.7v, is it safe to use 3.7v instead of 3v ? I have UniT 203+
@@UniTrendTechnology I got the 204+ since one month ago, it's amazing. I don't need another tool most of the times I analyze something. NCV, capacitance... it has everything i need. I'm planning, once this 204+ makes me earn more, to buy an UT243 three phase multimeter or an UT283A network analyzer, it depends of what i would need the most. If i have enough money, i will buy both!!
Hi Sir, thanks for reaching out. Yes, the UT201+ has the function of full protection within its measurement range. Please refer to the user manual to use it safely and correctly.
My unit 203+ isnt measuring any amps till 0.2 ampere on AC. After that it is giving results. On DC it is working fine even on low amps. Plz suggest me solution, i bought it new.
Hi My friedns, UT203+ AC/DC current range is 40.00A/400.0A and the accuracy guarantee range is 5%-10% in the manual, which means the minmun guarantee current will be 40.00A*5%=2A. If you are looking into one clamp meter for very low current, i will recommend UT211B clamp meter. UT211B the minmun guarantee current is 600.0mA*5%=30mA
@@tonyzhou8838 thanks my brother. I found uniT 203+ don't work below 0.1amp due to 40amp limitation. Additionally i thought 5-10% error belong to display value not to minimum (40amp or 600mA as you said). If display is 10amp then actual results would be in between 9.5-10.5amp (for 5%) and 9-11 (for 10% error). Correct me if im wrong
Hi Uni T, can I download this video and share it to my facebook group? I can share this using your video link but when video is viewed from a link it is displayed on google browser mode not direct on facebook. I had created a uni T multimeter enthusiast group and would like to share videos of your products to our members
Yes, after 60s. HOLD/BACKLIGHT Button Short press this button to enter/exit the data hold mode, and long press (about 2s) this button to turn on/off the backlight (the backlight will automatically turn off after 60s).
I have a problem with my ut 208 clamp meter when i mesure current for example 150 amp the and the conductor is not in the center of jaw it give wrong reading about 10 amps and that diffrent is very big and my user manual say That if conductor not in the center of jaw it may give 1% wrong reading that mean in my case should be 1.5 amp in 150 amp not 10 amps And the readings increas when i put conductor near end of jaw near clamp meter body and decrease if the wire in the far side of the clamp meter body I open it and try to adjust potentiometers near transformer conection and nothing happen problem still Can you hilp me
The manual does not say 1%. It only says that the jaws should be perpendicular to the current flow for better accuracy. Also did you zero the meter before your test? How do you know the reading is wrong by 10 amps? Did you test with another meter?
@@grahammarshall6135 thank you I fix that problem There is a potintiometer inside it when you rotate it it give you very good accuracy And I use another clamp meter to test it And it be very good
Hi Sir, thanks for reaching out. For the purchase details, the best is to contact our sales manager. The contact details can be found at: bit.ly/3OsiDJO
Hi Sir, the UT202+ can measure the temperature range of -40℃~1000℃. If the part’s temperature is within this range, then its temperature can be measured by UT202+.
Hi Sir, the UT200+ Series features 600V overload protection. It can conduct the measurement normally within 600V voltage, and please refer to the user manual for the right use.
@@UniTrendTechnology no, i mean that if by mistake if i selected dial to continuity mode or resistance mode and put the probs on 220v AC or DC ll it damage my UT203+ ? you know it happen some time by mistakenly that your meter is on Resistance test mode and you test the voltage on mains 220v
Hi Sir, in case of misoperation/wrong input of 220V ac/dc, the meter will not be damaged. If it is convenient, please leave your email address, and we will send you a demo video for your reference.
I've bought the UT204+ and it's a good deal for the price.
I'm from Brazil.
Amigo vc achou bom esse alicate amperímetro
Helo dear, i have countered an issue with battery, AAA battery (1.5v) giving low battery when any of one cell goes to 1.3v even other on is 1.5 or 1.4 doesn't matter, i wana use rechargeable battery but it has 3.7v, is it safe to use 3.7v instead of 3v ? I have UniT 203+
Plz respond
UNI-T 204+ BEAUTIFUL LOVELY.LOOOOL
what ll happen if test voltage while selected ohm or continuity ?
I love UNI-T, i'm planning to buy a 204+ for me.
Thanks for the love!
@@UniTrendTechnology I got the 204+ since one month ago, it's amazing. I don't need another tool most of the times I analyze something. NCV, capacitance... it has everything i need. I'm planning, once this 204+ makes me earn more, to buy an UT243 three phase multimeter or an UT283A network analyzer, it depends of what i would need the most. If i have enough money, i will buy both!!
I agree, the best meters for the money. Why by a fluke for 10 times the price.
Hello dear, does UT201+ also have full protection features?
Hi Sir, thanks for reaching out. Yes, the UT201+ has the function of full protection within its measurement range. Please refer to the user manual to use it safely and correctly.
@@UniTrendTechnology And what about UT203?
Hi Sir, yes, the UT203 also has the function of full protection within its measurement range.
@@UniTrendTechnology Thank you so much for your replied.
What is the max and min freq Range For UT203+ to test AC voltages ?
10-60KHz
@@UniTrendTechnology im testing 150v at 40KHz freq but its not showing any reading but why ?
Can i use 3.7v battery in 203+. is this safe operating voltage range ?
My unit 203+ isnt measuring any amps till 0.2 ampere on AC. After that it is giving results. On DC it is working fine even on low amps.
Plz suggest me solution, i bought it new.
Hi My friedns, UT203+ AC/DC current range is 40.00A/400.0A and the accuracy guarantee range is 5%-10% in the manual, which means the minmun guarantee current will be 40.00A*5%=2A. If you are looking into one clamp meter for very low current, i will recommend UT211B clamp meter. UT211B the minmun guarantee current is 600.0mA*5%=30mA
@@tonyzhou8838 thanks my brother. I found uniT 203+ don't work below 0.1amp due to 40amp limitation. Additionally i thought 5-10% error belong to display value not to minimum (40amp or 600mA as you said). If display is 10amp then actual results would be in between 9.5-10.5amp (for 5%) and 9-11 (for 10% error). Correct me if im wrong
I have UNI-T UT204R😃👍👍
The best thing they response us here faster ❤❤❤❤ dont let me go wrong 😂😂
Which one can measure capacitor accurate?
Hi Sir, thanks for reaching out. We recommend you choose the UT204+ with 6000 counts and zero functions. Please find more details at: bit.ly/3KIpwI0
@@UniTrendTechnology Ok,thank you.
Hi Uni T, can I download this video and share it to my facebook group? I can share this using your video link but when video is viewed from a link it is displayed on google browser mode not direct on facebook. I had created a uni T multimeter enthusiast group and would like to share videos of your products to our members
Hi Juan, thanks for your interest. You can directly share this video from here to Facebook.
*Backlight auto off ?*
Yes, after 60s.
HOLD/BACKLIGHT Button
Short press this button to enter/exit the data hold mode, and long press (about 2s) this button to turn on/off the backlight (the backlight will automatically turn off after 60s).
Bos coba review clamp meter ut208b ..
Saya baru membeli nya kemarin dan belom paham memakai nya maaf pemula ...
Trimaksih
Hi Sir, thanks for you advice, and you can read the manual first in our website. Thank you.
I have a problem with my ut 208 clamp meter when i mesure current for example 150 amp the and the conductor is not in the center of jaw it give wrong reading about 10 amps and that diffrent is very big and my user manual say That if conductor not in the center of jaw it may give 1% wrong reading that mean in my case should be 1.5 amp in 150 amp not 10 amps
And the readings increas when i put conductor near end of jaw near clamp meter body and decrease if the wire in the far side of the clamp meter body
I open it and try to adjust potentiometers near transformer conection and nothing happen problem still
Can you hilp me
The manual does not say 1%. It only says that the jaws should be perpendicular to the current flow for better accuracy. Also did you zero the meter before your test? How do you know the reading is wrong by 10 amps? Did you test with another meter?
@@grahammarshall6135 thank you I fix that problem
There is a potintiometer inside it when you rotate it it give you very good accuracy
And I use another clamp meter to test it
And it be very good
Need ut204+ demonstration vedio with clearly mentioned every button function. Please make it and inform me.
Thanks for sharing your interests, we will add this content to our to-do list!
If you don't know how to use it you probably don't need it
Thanks for the advertisement.
Now I looked and these devices appeared on Taobao.
I will buy it.
How much
Oi amigo vcs tem loja no Brasil?
Hi Sir, thanks for reaching out. For the purchase details, the best is to contact our sales manager. The contact details can be found at: bit.ly/3OsiDJO
Yes ok
does anyone know if i can measure temperature on parts under tension (220v) with the ut202+?
Hi Sir, the UT202+ can measure the temperature range of -40℃~1000℃. If the part’s temperature is within this range, then its temperature can be measured by UT202+.
Good
Kitnay ka uni 203+
204+ not available in nepal
UT 203 PLUS price
3300
@@naimatkhanpk65 from where i can buy ?
From any local Market
This price is wholesale price Retail prices is 35-3700
Ut71e
cast
what ll happen if test voltage while selected ohm or continuity ?
Hi Sir, the UT200+ Series features 600V overload protection. It can conduct the measurement normally within 600V voltage, and please refer to the user manual for the right use.
@@UniTrendTechnology no, i mean that if by mistake if i selected dial to continuity mode or resistance mode and put the probs on 220v AC or DC ll it damage my UT203+ ? you know it happen some time by mistakenly that your meter is on Resistance test mode and you test the voltage on mains 220v
@@UniTrendTechnology ?
Hi Sir, in case of misoperation/wrong input of 220V ac/dc, the meter will not be damaged. If it is convenient, please leave your email address, and we will send you a demo video for your reference.
@@UniTrendTechnology must show in video test 220v while selected ohm on meter dial thanks