How To: DIY Budget Brick Walkway From An Old Chimney
HTML-код
- Опубликовано: 23 авг 2024
- A rustic garden path from built from recycled old chimney bricks. This DIY pathway took me about 15 hours to complete. Its a great cheap option instead of stone and other pricey materials. The total cost was 25 dollars for landscaping fabric. Everything else was either free or left over from other projects. Had a blast with this one. Looking forward to more home renovation, construction, and small shop projects.
Would you consider using a dry mortar mix rather than sand. The mix could be soaked after laying the bricks. It would set and hold the bricks in place. The sweeping of some of the mix over the surface and into any gaps before wetting, could also help secure the bricks in place and you would not have sand get washed out when the rain comes.
Appreciate the help in learning
Awesome!! Tomorrow morning I'm going to Lowe's for the final materials grab and then will be working to finish mine by Sunday. I really hope to take semi decent pictures or videos and attempt to upload a video half as good as yours 💪🏼💪🏼
Thanks! hope everything goes smoothly for you
use some flexible plastic edging that you can pin behind the large stones to lock them in
Parabéns pelo seu trabalho
Nicely done!
Gorgeous 💕
Que buen trabajo amigo saludos de Paraguay éxitos y bendiciones y sigue adelante..
That looks awesome.
Great video. Thank you. That must have been a good sized chimney 🙂
Zzx,
X
efekt jest super ale to kiepski pomysł. Cegła to glina i pod wpływem warunków atmosferycznych deszcz, śnieg, mróz, to tylko kwestia czasu kiedy zacznie się łuszczyć.
Can you tell us what you used in order on before putting the bricks down?
Start with landscaping fabric, then roadbase/3/4 minus, which gets tamped. Then sand on top of that. Fill in brick gaps with more sand and tamp again
Si no se tiene la maquina para aplanar la tierra que se puede usar
👍
How do you keep the sand from washing out?
What brand/type of saw did you use for the cuts? I need something a woman recovering from shoulder surgery can use with ease.
He was using a grinder with what I think is a diamond blade
Is there any way I can use some sort of morter in between the bricks to stick them together and fill in the cracks?
yes you can do mortar.
whats that sand stuff called that u put after you layed down the bricks
Nice vid. I am doing something similar. How did you clean your bricks please? Mine have quite a lot of lime mortar on them still.
Thank you sir. I knocked all the big pieces off with a hammer. It should crumble off with some force
Would this be a good path to clean when it snows. Need a path just like this going down a hill to the home. Seniors are starting to have trouble walking when it snows and things get icy
Brick is great in the snow and cold climates it's porus rough surface make it so it has much more traction compared to the cement and tile pavers we commonly see today
Another good idea is to throw sand on commonly utilized paths to add to the traction and at the end of the freeze you can sweep it up and save it for next year
What's the gap between bricks ?
1/4". I used a speed square as a gauge.
What did you use to fill in the gaps at the end ?
Sand should be used
What did you lay as your base layer?
I used roadbase
@@trevorsoare6203 thank you. I’m wanting to do a small brick path in my garden and wanting something fairly straight forward on the base before adding sand! I don’t have any machinery and will be all done by hand.
So just brush in sand and cement to point it
I used sand. Worked great
this is not a how to..how to videos explain and teach
Won’t last 5 minutes
You're right, It didn't. needed something to hold the bricks and sand from sagging down the hill on the right side. Poured a concrete retaining wall and reset the outside edge and it's been good ever since.