Great video, really like the flashing lights with the horn on this system. The light cut off when signal is on will help other drivers see it better. The turn signals on the hand guards is a great idea, but some will say they can get damaged if you crash off road. But on road it is a much better and more visible location for turn signals. But in my opinion I would keep the original location and use your aux bracket. Also that bracket would be great for the Pan Am if used by the police to mount their emergency lights, that is a great location for them. We already have a few demo units here in Fort Worth Texas that a dealer has been loaning to departments. This video was also great on how to wire something from the battery, I did not know this and is a big helper for adding a Garmin GPS and USB port.
@@DENALIElectronicsall installed. I emailed in. I have some issues and would love to be able to get someone on the phone. This email only is killing me.
Why not Integrating the turnsignal light ( led ) into the D-4's ? 🤔 ( like most new cars now ) Much cleaner look, no extra mounts... But it's a very nice system ! 👌👍
Although our DialDim shouldn't be submerged for long periods of time, we feel that Pan America owners will have problems with their battery being under water long before our controller becomes an issue.
I would like to know how to get a VEHICLE - SPECIFIC Wiring Kit for my Harley D. FXDWG DYNA Wide Glide to mount DENALI D7s , And also what is the POWER HOUSE Unit Used For??? Thank You!!! BB.
We have a short video highlighting the T3 turn signals: ruclips.net/video/GjT4wfF2KtE/видео.html Is there something specific that you would like to see?
What if I don't want the dial system? Just the driving lights and the hand guard turn signals for my 1250S. I'm not that fancy, just want it to turn on and off and do the turn signals the way it does in the video with the Plug and play wiring. Thank you in advance.
We would set you up with our driving light wiring harness, driving lights, the upper light mount and the T3 plug and play kit. I built a cart for you so you can see all of the pieces: denalielectronics.com/apps/cart-loader?cff_crt=acca541fdeed958840ee324a3cb8e032_1656188172276 Let me know if you have any questions!
Great video! Would you be able to tell me what kind of connector the headlight has, im doing a custom setup and want a round headlight and would like to know if the connector is unique or normal
It's hard to share via RUclips, but you can see the headlight pass through connector on our DialDim harness: denalielectronics.com/products/plug-play-dialdim-wiring-adapter-for-harley-davidson-pan-america-1250?variant=41058587672760¤cy=USD&gclid=Cj0KCQjwy9-kBhCHARIsAHpBjHh3LB9lLc3NkCdodcyiUSQd4VhRS4WoSokn2_2_dzD2og7jofaE9nIaAon5EALw_wcB
As often as I've been cut off or not seen with my Pan Am (black) just like my other quiet bike (94 VFR in red) VS my loud bike (07 Dyna with a V&H shorty exhaust that's all black). It needs to be louder and have more lighting.
Here in Davao Philippines the dealer is trying to void my warranty because they did not install my auxiliary lighting. They said it is the reason my bike has had 3 batteries, starter control module and no starting episodes. My lights are 2 watt LED.
The DialDim Lighting Controller is capable of using a light set to cancel (go dark) with signal, or flash with signal! denalielectronics.com/collections/accessory-mangement/products/dialdim%E2%84%A2-lighting-controller-universal-fit
I have a Pan America and am looking to add a few lights but I cannot find the crossbar mount you have the D4's mounted on in this video. Are they available?
This is the item you are searching for: denalielectronics.com/products/driving-light-mount-harley-davidson-pan-america-1250?rq=gc_motorcycle~yr_2022~mk_harley-davidson~md_pan-america-1250
I was looking between the cansmart and the dial dim for my PanAm. Is there a way to connect the B6 brake light with the dial dim controller, just like we have on the cansmart ?
@@DENALIElectronics Yes that's a way but that way the customisation won't be there for thr brake light flash etc. So contemplating before pulling the trigger.
Hello! Terrific looking products and great tutorial video. I own a 2022 Pan Am S. Is there a way that you could give me a break down of the pieces I would need to "Tap in" to the options you mentioned for the end result you have in this video? Turn signal feature, horn flash, high beam etc. I basically want the same setup you have in the video. The D4s, DMs, D3s on the handle bars and rear. I ride a lot, 920 miles in 2 and a half weeks of ownership and mostly at night. So I want to make sure that people see me very obviously. And I want to be able to see deer ahead of time. Thank you.
All of the lights and accessories developed for the Pan Am are located here: denalielectronics.com/pages/product-result?rq=gc_motorcycle~yr_2021~mk_harley-davidson~md_pan-america-1250
Thank you! Yes, we ship globally direct from our website. You can also purchase through our distribution partners in Europe to find product that is in stock locally. Our distributor in France is Bihr!
Hi Charles! We do offer installation at our Exeter, RI location. Give us a call and one of our local customer service reps can get some contact information from you and confirm ETA's on the parts you are interested in. +1 401 360 2550
There is a chance that it could work, but we have not tested our controller with other brand lights. At a minimum you would have to wire our 3 wire pigtail to the HD lights to insure connection to the DialDim harness.
The video is great! But! after sending three emails and 1 phone call to get the price and availability of the products, no response at all on my email, what's going on? It's time to get with the program. Looking forward to a response. Ross
It looks like someone got back with you within a couple of days. We have just switched our processing system and are still working out some of the kinks. Thanks for understanding.
I gotta be honest, I'm quite a few hours in, and there is nothing "easy" or just "plug and play". I have small hands and I can't get to the wires for the headlight. You need to route the right turn signal wire through a mess of wires and the frame. Some clearer video of running and zip tying the wires would have been great. I'm guessing they will be in the correct place when I put everything back and they won't bind anywhere. Also, some indication of a "dry fit and testing" point would be good. I'd hate to be done and something doesn't work.
"Plug-and-play" is commonly used to describe an install that doesn't require modification to the motorcycle or it's original equipment. This DialDim kit includes everything needed to install without tapping wires or modifying the OEM components. We try to note in every install video that you should check clearances regularly while installing any wiring to your bike. A quick lock-to-lock of the bars while wiring can be helpful to check pinch points. Reach out to our Customer Service team if you have questions: denalielectronics.com/pages/contact-us
Though is obvious in this video it may pay to mentions your amazing D4 light mount requires removing the side crash bars (on an adventure bike 😂) Probably something worth mentioning in your video. I hope I'm missing something, and would love to eat my words. Let me know, I waited over 9 months for my shipment.
We have dealers all around the globe: denalielectronics.com/pages/store-locator Plus most motorcycle service shops are willing and able to install our lights!
For which part? The PanAmerica DialDim kit is $274.99: denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-harley-davidson-pan-america-1250
Great video, really like the flashing lights with the horn on this system. The light cut off when signal is on will help other drivers see it better. The turn signals on the hand guards is a great idea, but some will say they can get damaged if you crash off road. But on road it is a much better and more visible location for turn signals. But in my opinion I would keep the original location and use your aux bracket. Also that bracket would be great for the Pan Am if used by the police to mount their emergency lights, that is a great location for them. We already have a few demo units here in Fort Worth Texas that a dealer has been loaning to departments.
This video was also great on how to wire something from the battery, I did not know this and is a big helper for adding a Garmin GPS and USB port.
We are glad that it helped, thanks for watching!
Picked up this entire kit. Can’t wait to see it on the bike
Be sure and tag us when you get it installed...sounds legendary!
@@DENALIElectronicsall installed. I emailed in. I have some issues and would love to be able to get someone on the phone. This email only is killing me.
I like it, and can't wait to get a quote to install the full set as in the video to my pan am
You're going to love it! PanAm parts are going out the door almost as soon as they arrive, so be sure to get your order in as soon as you can!
I have the D7 mounted on my crash bars and the split sound bomb on the same crash bar. I NEED this kit!
The DialDim is a game changer!
Why not Integrating the turnsignal light ( led ) into the D-4's ? 🤔 ( like most new cars now ) Much cleaner look, no extra mounts... But it's a very nice system ! 👌👍
Thanks for your feedback and for watching!
Dang I need this for my upcoming Hoka Hey run!
Forward your Hoka Hey confirmation email to inquiries@denalielectronics.com and we will show you some love!
Great video
Thanks!
Maybe a better question for HD, but your module is down low as well. What happens when driving axl-deep through water?
Although our DialDim shouldn't be submerged for long periods of time, we feel that Pan America owners will have problems with their battery being under water long before our controller becomes an issue.
Does adding this controller to headlight make it lose it dynamic lighting on special. It moves when the angle changes.
Adding this controller does not change the operation of the stock headlight.
Can you post a video on dialdim installation for Ducati Multistrada V4S?
The Multistrada is next in line on our development list and we will release those videos as soon as we can get one in the shop!
I would like to know how to get a VEHICLE - SPECIFIC Wiring Kit for my Harley D. FXDWG DYNA Wide Glide to mount DENALI D7s , And also what is the POWER HOUSE Unit Used For??? Thank You!!! BB.
Can I use D3 led fog lights for Road glide ?
Since now the cansmart is available, can you guys please make a video on that.
Our team is pretty hooked up with new product development, but we will add the CANsmart video for the PanAm to the list.
Can you do a video on rear turn signals
We have a short video highlighting the T3 turn signals: ruclips.net/video/GjT4wfF2KtE/видео.html
Is there something specific that you would like to see?
What if I don't want the dial system? Just the driving lights and the hand guard turn signals for my 1250S. I'm not that fancy, just want it to turn on and off and do the turn signals the way it does in the video with the Plug and play wiring. Thank you in advance.
We would set you up with our driving light wiring harness, driving lights, the upper light mount and the T3 plug and play kit. I built a cart for you so you can see all of the pieces: denalielectronics.com/apps/cart-loader?cff_crt=acca541fdeed958840ee324a3cb8e032_1656188172276
Let me know if you have any questions!
@@DENALIElectronics Are the 3 hybrids available for my bike rather than the 7?
Great video! Would you be able to tell me what kind of connector the headlight has, im doing a custom setup and want a round headlight and would like to know if the connector is unique or normal
It's hard to share via RUclips, but you can see the headlight pass through connector on our DialDim harness: denalielectronics.com/products/plug-play-dialdim-wiring-adapter-for-harley-davidson-pan-america-1250?variant=41058587672760¤cy=USD&gclid=Cj0KCQjwy9-kBhCHARIsAHpBjHh3LB9lLc3NkCdodcyiUSQd4VhRS4WoSokn2_2_dzD2og7jofaE9nIaAon5EALw_wcB
As often as I've been cut off or not seen with my Pan Am (black) just like my other quiet bike (94 VFR in red) VS my loud bike (07 Dyna with a V&H shorty exhaust that's all black). It needs to be louder and have more lighting.
Here in Davao Philippines the dealer is trying to void my warranty because they did not install my auxiliary lighting. They said it is the reason my bike has had 3 batteries, starter control module and no starting episodes. My lights are 2 watt LED.
Very nice👍is it possible operate the D-4’s as a light and side signal in one? If not, will you work on such system? Thx
The DialDim Lighting Controller is capable of using a light set to cancel (go dark) with signal, or flash with signal!
denalielectronics.com/collections/accessory-mangement/products/dialdim%E2%84%A2-lighting-controller-universal-fit
@@DENALIElectronics Thanks for the reply! When D4 flashes with a signal, is it capable flash orange?
I want this for my PanAm! Do you have support incase I have questions trying to install these components on my bike?
Our customer service team is standing by to help however we can: denalielectronics.com/pages/contact-us
Hi, who is the Australian representative for you guys? I ordered D7 thinking of getting this kit ! Thanks
Our dealer in Australia is Whites: www.whitesmoto.com.au/collections/denali-electronics
Hi do you make vehicle specific harness for ducati multistrada v4?
We don't currently produce that harness, but the v4 is on our list for future development!
@@DENALIElectronics thank you for the reply i hope you can have them soon
I have a Pan America and am looking to add a few lights but I cannot find the crossbar mount you have the D4's mounted on in this video. Are they available?
This is the item you are searching for: denalielectronics.com/products/driving-light-mount-harley-davidson-pan-america-1250?rq=gc_motorcycle~yr_2022~mk_harley-davidson~md_pan-america-1250
Is Harley-Davidson doing the installation? The installation is independent the vehicle's computer?
Some HD dealers might perform installation for you. Yes, our products are independent of the bike's computer.
I was looking between the cansmart and the dial dim for my PanAm. Is there a way to connect the B6 brake light with the dial dim controller, just like we have on the cansmart ?
There is not a built-in connection to the B6. You can always just tap the rear brake circuit with the posi-tap.
@@DENALIElectronics Yes that's a way but that way the customisation won't be there for thr brake light flash etc. So contemplating before pulling the trigger.
If purchased the whole kit, can you guys install it?
We do not install products at this time. You can check out our dealer network here: denalielectronics.com/pages/store-locator
Hello! Terrific looking products and great tutorial video. I own a 2022 Pan Am S. Is there a way that you could give me a break down of the pieces I would need to "Tap in" to the options you mentioned for the end result you have in this video? Turn signal feature, horn flash, high beam etc. I basically want the same setup you have in the video. The D4s, DMs, D3s on the handle bars and rear. I ride a lot, 920 miles in 2 and a half weeks of ownership and mostly at night. So I want to make sure that people see me very obviously. And I want to be able to see deer ahead of time. Thank you.
All of the lights and accessories developed for the Pan Am are located here: denalielectronics.com/pages/product-result?rq=gc_motorcycle~yr_2021~mk_harley-davidson~md_pan-america-1250
How have you mounted the dial switch to the handlebars. I have the kit and the dial switch does not fit as you have it shown.
You are likely seeing a switch mount: denalielectronics.com/products/dnl-mbk-10000
@@DENALIElectronics Thanks for the info……but you website says that that product does not fit the PAS 1250……so slightly confused 🤷♂️
Very nice product development and fantastic video presentation. Do you ship to end customer in France from your web site ?
Thank you! Yes, we ship globally direct from our website. You can also purchase through our distribution partners in Europe to find product that is in stock locally. Our distributor in France is Bihr!
❤
🙏
Do you offer installation?
Hi Charles! We do offer installation at our Exeter, RI location. Give us a call and one of our local customer service reps can get some contact information from you and confirm ETA's on the parts you are interested in. +1 401 360 2550
Hello, does your wiring work with the Daymaker led auxiliary lights from HD ref 68000340?
There is a chance that it could work, but we have not tested our controller with other brand lights. At a minimum you would have to wire our 3 wire pigtail to the HD lights to insure connection to the DialDim harness.
The video is great! But! after sending three emails and 1 phone call to get the price and availability of the products, no response at all on my email, what's going on? It's time to get with the program. Looking forward to a response.
Ross
It looks like someone got back with you within a couple of days. We have just switched our processing system and are still working out some of the kinks. Thanks for understanding.
Will any of them get an EU registration?
All of our lights with the exception of the S4 carry E-mark certification.
I gotta be honest, I'm quite a few hours in, and there is nothing "easy" or just "plug and play". I have small hands and I can't get to the wires for the headlight. You need to route the right turn signal wire through a mess of wires and the frame. Some clearer video of running and zip tying the wires would have been great. I'm guessing they will be in the correct place when I put everything back and they won't bind anywhere. Also, some indication of a "dry fit and testing" point would be good. I'd hate to be done and something doesn't work.
"Plug-and-play" is commonly used to describe an install that doesn't require modification to the motorcycle or it's original equipment. This DialDim kit includes everything needed to install without tapping wires or modifying the OEM components.
We try to note in every install video that you should check clearances regularly while installing any wiring to your bike. A quick lock-to-lock of the bars while wiring can be helpful to check pinch points. Reach out to our Customer Service team if you have questions: denalielectronics.com/pages/contact-us
Though is obvious in this video it may pay to mentions your amazing D4 light mount requires removing the side crash bars (on an adventure bike 😂) Probably something worth mentioning in your video. I hope I'm missing something, and would love to eat my words. Let me know, I waited over 9 months for my shipment.
What model of crash bars are equipped on your Pan America?
@@DENALIElectronics stock standard
Trying to contact someone at either Denali or Twisted Throttle - Is anybody home?? No return calls have been made!
Worried that youse guys are OK!
We are alive and well!
We can be reached at +1 401 360 2550 or by sending us an email at denalielectronics.com/pages/contact-us
Where does one get this installed?
We have dealers all around the globe: denalielectronics.com/pages/store-locator
Plus most motorcycle service shops are willing and able to install our lights!
I want how much lol
For which part? The PanAmerica DialDim kit is $274.99: denalielectronics.com/collections/new-products/products/dialdim%E2%84%A2-lighting-controller-for-harley-davidson-pan-america-1250