I have the exact same thoughts. The boring looking emitter is better for spinning and more secure because the blades goes in deeper. The s curve emitter is secure but the shallow depth would be concerning for dueling. I actually wrapped some leather at the choke point and it provides better comfort and grip for spinning
Recently Vire sabers has been selling a choke extension that you can add below the emitter. Makes the S curve emitter deeper and with a choke. Best of both!
Hey DJ, for these emitters specifically I but them from Outer Rim Saber parts. The size is M4 and the length can differ between emitters. The red ones I have in this video are 4mm, but they are really close to the hilt. 6mm is a better length and you can always file them shorter
I can't remember if they were 13 or 14, but either will work. Even size 17 will fit and probably be easy to put on. I used the smaller size for a tighter fit
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I have the exact same thoughts. The boring looking emitter is better for spinning and more secure because the blades goes in deeper. The s curve emitter is secure but the shallow depth would be concerning for dueling. I actually wrapped some leather at the choke point and it provides better comfort and grip for spinning
Recently Vire sabers has been selling a choke extension that you can add below the emitter. Makes the S curve emitter deeper and with a choke. Best of both!
a very enlightened opinion. I absolutely agree with you.
"Hello there"
[instant like]
Wait a minute... I recognize that quick connect coupler... how did you get it to work with VHC/VHS parts?
I epoxy/resin glued an LGT part into an MHS part. So one end is VHC/LGT compatible and the other is MHS compatible.
Solid piece seems more cool to me interms of strength
when i look at lightsabers like the sabers form the movie all of them are weak at the emitter
Very true, but for practical purposes, toy lightsabers have to have a bit more girth for stability.
Hey there.
I was wondering where you aquired the thumb screws and what size they are?
(especially the length and hole size) Thanks in advance!!
Hey DJ, for these emitters specifically I but them from Outer Rim Saber parts. The size is M4 and the length can differ between emitters. The red ones I have in this video are 4mm, but they are really close to the hilt. 6mm is a better length and you can always file them shorter
@@galefs_minis_n_sabers Thanks for the info, and apologies for the late, late, reply.
Where'd you get the o-rings at?
Lowes or Home Depot. Plumbing section.
What size o-rings did you use?
I can't remember if they were 13 or 14, but either will work. Even size 17 will fit and probably be easy to put on. I used the smaller size for a tighter fit
@@galefs_minis_n_sabers appreciate the info thank u sir
@@galefs_minis_n_sabers you mean 14mm? I'm a newb