The best addition to their air hammer attachments they could develop is one of the big (the middle ones in the display) adapters with a drilled bore and a large chamfer on the outside for welding up custom tools. Perhaps packaged together with the appropriate electrode or filler for the alloy (if they're made from tool steel and not a low-alloy high strength steel like 42CrMo4)? Can't count the number of times I've had the need to weld up a custom tool but settled on just doing some sketchy set up with the tips that came with my air hammer (not a Mueller one) because i don't have any hardened hex stock on hand
As far as the air hammer goes, an attachment for the ol lady would be nice. I think this might be the only tool with enough power to really get that job done correctly.
Those “scissors” look like exact copies of what are called “black panthers” in the land down under. Such good snips and will cut through just about anything! And the long pairs also have built in wire strippers.
Glow plug extraction is a great idea! Also I have a suggestion, make a pair of pliers that will push the lock down on a deutch connector and then with the pliers you can pull it apart. Deutch connectors can be very difficult to unplug.
Should've done a review on their inlet and outlet nox sensor taps they sell as a set they saved my bacon a million times and they hold up . They come with built in guides they're the best
Thanks for the vid. One suggestion, a lot of guy I know have chipping guns, like the big chooch, but we have different chucks and retainers. I would love to be able to purchase those same bits, but with a .680 round collar. As of now, for the pin drivers, I just purchase a point chisel and cut it.
Them guys from east across the pond make some pretty high quality tools man!!! I have the line wrenches (that say Matco on them) and they are pretty great! I’m picking up a wrench extender next!
For the big chooch air hammer, need a pipe driver, hollow shaft, not to deep. allows you to drive, ground rods, fence posts, stakes, supports, into the ground.
"Mueller Kueps Press and pull sleeve kit type 2" #609420 - Available On FortisHD www.fortishd.com/product/tools/garage-equipment/press-pull-sleeve-kit-type-2/
Can do the make the adapter for the air hammer that takes the socket like to have on the smaller air hammers that would be good for some big bolts that are being a pain in the butt. The one you can put a wrench on you know
Man könnte noch einen Machen um Spurstangenköpfe aus zutreiben eine Gabel wie bei Snap on One could also make a tool for driving out tie rod ends, similar to a fork-style tool like the one from Snap-on.
Love the high tooth count 3/4 ratchet & really interested in buying it but i think a sliding extension handle like EZ RED is better. Would definitely buy it if it had that style of handle
I've never used any other tools unless it was rebranded and I didn't know it. I am wondering how the normal air hammer long barrel compares to the matco air hammer.
TOOL LINKS
4:00 BIG CHOOCH (Air Hammer): tinyurl.com/MuellerKuepsAirHammer
8:08 Hanger Hooks: tinyurl.com/Uni-Hook-Set
8:37 Wrench Extender: tinyurl.com/tekamo-fortis-wrenchextend
11:03Vibro Impact Hammer: tinyurl.com/Air-Hammer-VIBRO-IMPACT
11:14 HD Scissor: tinyurl.com/hd-scissors-tekamo
14:55 Razor Blade Scraper: tinyurl.com/Razor-Blade-Scraper
15:52 Glow Plug Extractor: tinyurl.com/Broken-Glow-Plug-Removal-Tool
The best addition to their air hammer attachments they could develop is one of the big (the middle ones in the display) adapters with a drilled bore and a large chamfer on the outside for welding up custom tools. Perhaps packaged together with the appropriate electrode or filler for the alloy (if they're made from tool steel and not a low-alloy high strength steel like 42CrMo4)? Can't count the number of times I've had the need to weld up a custom tool but settled on just doing some sketchy set up with the tips that came with my air hammer (not a Mueller one) because i don't have any hardened hex stock on hand
Cam, you always looked tall.........until standing next to Mark! Hahaha
Most people in canada are short cause of the long winters, so cam at 170cm is quite tall!
Yeah, Mark is a tall guy! haha
As far as the air hammer goes, an attachment for the ol lady would be nice. I think this might be the only tool with enough power to really get that job done correctly.
Awesome it’s always awesome when I get a notification that Tekamo posted another banger 😎
Thanks, we appreciate you watching!
Those “scissors” look like exact copies of what are called “black panthers” in the land down under. Such good snips and will cut through just about anything! And the long pairs also have built in wire strippers.
This company is awesome! Andre also seems like a really good dude.
We’re glad you like him, he’s a great guy!
Glow plug extraction is a great idea! Also I have a suggestion, make a pair of pliers that will push the lock down on a deutch connector and then with the pliers you can pull it apart. Deutch connectors can be very difficult to unplug.
Real mechanic channel
Tekamo and mueller for the win!
Thank you Cam and tekamohd
Should've done a review on their inlet and outlet nox sensor taps they sell as a set they saved my bacon a million times and they hold up . They come with built in guides they're the best
Big chooch 1" 3/4" nut buster, socket adapter like they got for smaller air hammer in case you have to loosen bolts and nuts after Tylor's visit.
MUELLER MUELLER MUELLER 😂😂😂🔥🔥🇨🇦🇨🇦❤️❤️such quality tool's lets go big chooooch for the win
a pickle fork attachment for the big chooch would be handy aswell
5:52 it's missing a pickle fork
Can you please do more service truck tours and some shop tours
36”/1m long chisel 2”/5cm wide for big chooch for cleaning out frozen or hard clay out of undercarriages
Thanks for the vid. One suggestion, a lot of guy I know have chipping guns, like the big chooch, but we have different chucks and retainers. I would love to be able to purchase those same bits, but with a .680 round collar. As of now, for the pin drivers, I just purchase a point chisel and cut it.
That's a great idea, we'll pass it along!
@@TekamoHD Sorry, .680 round with oval collar. Thanks
Them guys from east across the pond make some pretty high quality tools man!!! I have the line wrenches (that say Matco on them) and they are pretty great! I’m picking up a wrench extender next!
You can’t go wrong with their tools, they last a lifetime!
Would it be possible to make an intrinsically safe brass hammer or other material that won't produce sparks?
for the big chooch... i think we need a fork attachment. on some of the trucks and other equipment it would help to pop out ball joints and inserts
What’s the cost for freight to Australia or do you have a distributor?
For the big chooch air hammer, need a pipe driver, hollow shaft, not to deep. allows you to drive, ground rods, fence posts, stakes, supports, into the ground.
That's a great idea, we'll look into it!
For the Air hammer, Offset weld cutting chisel. Like Mayhew Pro 3197.
What was the part number for that bigger bearing press kit?
"Mueller Kueps Press and pull sleeve kit type 2" #609420 - Available On FortisHD
www.fortishd.com/product/tools/garage-equipment/press-pull-sleeve-kit-type-2/
Damn the mueller guy is tall 😆
Can do the make the adapter for the air hammer that takes the socket like to have on the smaller air hammers that would be good for some big bolts that are being a pain in the butt. The one you can put a wrench on you know
Man könnte noch einen Machen um Spurstangenköpfe aus zutreiben eine Gabel wie bei Snap on
One could also make a tool for driving out tie rod ends, similar to a fork-style tool like the one from Snap-on.
Love the high tooth count 3/4 ratchet & really interested in buying it but i think a sliding extension handle like EZ RED is better. Would definitely buy it if it had that style of handle
Appreciate the feedback, we'll pass that along to the manufacturers!
I've never used any other tools unless it was rebranded and I didn't know it. I am wondering how the normal air hammer long barrel compares to the matco air hammer.
"Gription" Haha, I use that term when talking about toilet paper! LOL The soft stuff just smears.
Sorry, too many vodka tonics before watching this!
can you guys send to Australia
Japan needs those tools plz
16:03 Hey wait a minute, that guy looks familiar lol.
Rad video
Wooohhhhooo
Omg I want the sticker with the 2 flags!!! Like for real where can we get the sticker with the American and German flag
I had no idea Cam was actually a dwarf. Who knew. 🤣
😂 He’s not that short, I just happen to be 6’6” lol
I’m finally in the top 20 in the comment section 😢 it’s a dream come true
Sooo, when are you showing the german made tools?
Someone is going to go broke buying all these tools 😆
Is Cam that short, or is that guy that tall? 😂😂
I’m always happy to get a tool that didn’t come from China…
These look like just copies of koken and Tools