I have repaired hundreds of ham radios, errors in the alignment instructions are common. It's important for any technican to have a good understanding of how circuits work in order to recognize errors and determine what is really needed to get things done. Thanks for the video Mr Carlson.
I grew up next door to a WWII veteran ham operator. He helped me get my Novice license about 1977. Sometime in the 80's he replaced his Drake Line with a IC-751A Icom. He invited me over to see it and he said for me to sit down and give it a spin. After turning the knob a few turns smoke arose out of the display area bigtime. Wow i felt bad. He was cool about it as always. I miss that guy almost as much as my dad. Oh, you are obviously a very smart fellow. Enjoy your videos very much, Thanks for going to all the trouble for us to enjoy your adventures. Chuck, AF4O
Thanks for comment! That's quite the story. I can imagine the moment when the magic smoke came out. I Bought a Icom IC-746 some time back, it's the one on the bench...... Anyways, I owned it for one day, and the display went out. I couldn't believe it! So... I pulled it apart and found a small transistor in the display unit that had been so hot, it desoldered itself. The little heat sink tab was blue! So I redesigned the area, built a circuit that would be fine running in the linear region, and all has been good since. There were also a bunch for IC's that took some heatsinks too. I don't believe in running parts hot enough to cook things.
Paul, thanks for bringing these mistakes in the service manual to light. Also the battery backup for the ram hasn't failed yet. I've had this rig since 86 and it works marvelous. I have the 250 hz filter in the 9mhz and 455kc IFs. It's like a barn door is slammed shut on the noise when their engaged.
Wow what timing! I installed a CR-64 yesterday in my IC-751A and was trying to set the ref. freq. with no luck thinking I had an equipment issue.... so I searched RUclips and found your post and yes the Service manual has it wrong!! I clipped my probe on the R11 by the IC5 (pin1) to made my tweak's. THANK YOU for posting! Jonathan-KN4G
I had my old IC 751 (not the A version) for 34 years before it lost some caps and went west. A donation to another more fortunate ham who tried to fix it. I bought a new IC 7300 which makes mincemeat of almost anything in its class. Good call, Paul! KQ2E
It's been a year now... I am SO happy with my IC-7300 that I couldn't be happier. I am STILL finding "new stuff" to change or improve my usage of the receiver. I'm hoping that my old rig hasn't hit the bottom of a large steel bin... LOL
I just purchased this (working) radio at yesterdays Bryan/College Station TX ARRL Field Day from a local member. I thought I would look on RUclips to see what people said and I saw your link. WOW, am I glad I listened to what you said about the battery. I KNOW I would have been one of those people to just yank it out. Thanks. I will also look now to see what other helpful advice you have on this ICOM IC-751A radio.
Hai there Peter this 9m2du ..as i said i have the same problem as mention upon the memories ,till today i have not get it fix instead i like you comment as time pass by i just too old to get it fix up. don't know what to do with it ,rest in peace i guest.. it good to hear you most comment i will follow you on repairing it great and interesting upon learning on it .
Hi Paul, it is really hard to believe but there are so many mistakes in original service manuals, sometime a real nightmare... very nice worked out 73 O.-Peter
If you DO get that Piexx board, be SURE to follow the setup directions EXACTLY. Not doing so will have "very bad things" happening in short order. Make sure a warning sticker is affixed to the board to save the day in case someone plays with the EEPROM board... and requires the setup afterward.
Mr Carlson, be advised that the best replacement for the volatile memory board is made by the Piexx people - - for IC-745 and IC-751 radios. Reasonable price, essy installation, and peace of mind.
Mr Carlson's Lab That's good! He'll certainly dlep bette st night! I did so for my IC-745 (Old Betsy} snd she was a happy camper. By the way, may I know your call sign? ..and I loved your resto on your "Gothic" Hammarlund receiver up the way there! What an inspiration.
Hi Paul this is Burt - you might remember me asking you to look at my yaesu 857d. I now have a icom 751A - was wondering if you might have some time to look at it. Let me know.
Everytime I go to the Ham radio store they always say Icom and and Yaesu are the same quality radio. I'm sure you know more about it than the sales folks....do you think they are built to the same standards internally? would love to hear your thoughts on both of them.
You might want to repeat the Icom 751A BFO alignment errors for others (like me) who need them. Have you checked that the model 751 manual also has those errors? Thanks... Bruce KQ2E
Hi there. First of all, I thank you for sharing such valuable information with us. I would like to know if you can send me the file that I should use to reprogram an ICOM RAM BOARD from an IC 751A. I have built an interface that I got based on an IC CD4040 and using the ICOM-RAM.EXE program which indicates that the recording process has been carried out correctly, when reading the ICOM RAM again I see that it actually contains information, but when installing the board in the IC 751A the equipment does not work correctly, I would like to try it with a different .BIN than the one I have if you can send it to me. Thank you again for your attention. Greetings from Argentina
Mr. Carlson... I have an ICOM 750 (which I understand is the same as a 751 only sold originally in a different country). I've owned it about 15 years. I've never changed the battery. Would you suggest I let sleeping dogs lie and leave it alone or change it to a new one (and take the precautions you mention)? And thanks for a great video!
Buy the EEPROM version board for $75 US and be done with the problem. But save the old board in case you need it. I built a special double battery backup board with diodes to make changing the battery a "no brainer." THEN I bought the new board. Duh. LOL
+Mr Carlson's Lab Engl Guitar amps is famous for having incomplete & just plain wrong information in their schematics. Some of the techs in Germany, where the amps are made, suspect it is done on purpose. All I know is they are so bad, I simply refuse to even acknowledge they exist & pretend they don't. I work on them like no schematic exists. That way, I don't get thrown off by their erroneous information, & it keeps their nonsense from entering my brain, and giving me any preconceived notions, about what they actually did. Turning the amps away at the door, works even better.
Bonjour dommage que tu ne montres pas precicement ou faire les mesures je ne suis pas electronicien t'as video ne m'aide pas beaucoup dommage ! 73 Eric FK8HM
I have repaired hundreds of ham radios, errors in the alignment instructions are common. It's important for any technican to have a good understanding of how circuits work in order to recognize errors and determine what is really needed to get things done. Thanks for the video Mr Carlson.
I grew up next door to a WWII veteran ham operator. He helped me get my Novice license about 1977. Sometime in the 80's he replaced his Drake Line with a IC-751A Icom. He invited me over to see it and he said for me to sit down and give it a spin. After turning the knob a few turns smoke arose out of the display area bigtime. Wow i felt bad. He was cool about it as always. I miss that guy almost as much as my dad. Oh, you are obviously a very smart fellow. Enjoy your videos very much, Thanks for going to all the trouble for us to enjoy your adventures. Chuck, AF4O
Thanks for comment! That's quite the story. I can imagine the moment when the magic smoke came out. I Bought a Icom IC-746 some time back, it's the one on the bench...... Anyways, I owned it for one day, and the display went out. I couldn't believe it! So... I pulled it apart and found a small transistor in the display unit that had been so hot, it desoldered itself. The little heat sink tab was blue! So I redesigned the area, built a circuit that would be fine running in the linear region, and all has been good since. There were also a bunch for IC's that took some heatsinks too. I don't believe in running parts hot enough to cook things.
What was his callsign ?
I have an IC-751-A. I really appreciate this video.
Paul, thanks for bringing these mistakes in the service manual to light. Also the battery backup for the ram hasn't failed yet. I've had this rig since 86 and it works marvelous. I have the 250 hz filter in the 9mhz and 455kc IFs. It's like a barn door is slammed shut on the noise when their engaged.
Wow what timing! I installed a CR-64 yesterday in my IC-751A and was trying to set the ref. freq. with no luck thinking I had an equipment issue.... so I searched RUclips and found your post and yes the Service manual has it wrong!! I clipped my probe on the R11 by the IC5 (pin1) to made my tweak's. THANK YOU for posting! Jonathan-KN4G
Glad to help gadgetman368. Thanks for your comment!
I had my old IC 751 (not the A version) for 34 years before it lost some caps and went west. A donation to another more fortunate ham who tried to fix it. I bought a new IC 7300 which makes mincemeat of almost anything in its class. Good call, Paul! KQ2E
It's been a year now... I am SO happy with my IC-7300 that I couldn't be happier. I am STILL finding "new stuff" to change or improve my usage of the receiver. I'm hoping that my old rig hasn't hit the bottom of a large steel bin... LOL
I just purchased this (working) radio at yesterdays Bryan/College Station TX ARRL Field Day from a local member. I thought I would look on RUclips to see what people said and I saw your link. WOW, am I glad I listened to what you said about the battery. I KNOW I would have been one of those people to just yank it out. Thanks. I will also look now to see what other helpful advice you have on this ICOM IC-751A radio.
edbrackin Glad this helped. Thanks for your comment!
Hai there Peter this 9m2du ..as i said i have the same problem as mention upon the memories ,till today i have not get it fix instead i like you comment as time pass by i just too old to get it fix up. don't know what to do with it ,rest in peace i guest.. it good to hear you most comment i will follow you on repairing it great and interesting upon learning on it .
Hi Paul, it is really hard to believe but there are so many mistakes in original service manuals, sometime a real nightmare... very nice worked out 73 O.-Peter
Thanks Peter! Nothing worse than a service manual leading us in the wrong direction.
Good to know about the 3 volt for that Ram. Thanks
Ruben No problem Ruben. Glad to help :^)
+Mr Carlson's Lab Piexx is the company that makes the non- volitile ram board.
Thanks for the info!
If you DO get that Piexx board, be SURE to follow the setup directions EXACTLY. Not doing so will have "very bad things" happening in short order. Make sure a warning sticker is affixed to the board to save the day in case someone plays with the EEPROM board... and requires the setup afterward.
Very good video nice job well done again from Gary in the UK 🇬🇧 👏
Boy, if you can't trust the service manual.............thanks for sharing...
Bud...
I agree Bud! Thanks for the comment.
When I connected my frequency counter, it did not have nixie tubes in it. Am I doing something wrong?
Awesome video as always. Thanks for your efforts.
Glad you enjoyed Rick!
The guys a wizard : )
I have an icom r75 and the oscillator is not on frequency. my question is where do I get the tuning tool to adjust the coil, what do you use?
Excellent Info - Thank You.
You're welcome Ted!
like to see a ic-730 repair no power out,like all you have on youtube,thanks WA4IOR
Is it the same procedure on the 751 without the A?
Please can you make videos
on how to build a radio
and also about the two books
that art of electronics on the chapters about transistors
I will try in the future. So many projects, so little time :^)
Mr Carlson, be advised that the best replacement for the volatile memory board is made by the Piexx people - - for IC-745 and IC-751 radios. Reasonable price, essy installation, and peace of mind.
Thanks for the tip William! I believe Stephen is going to get the aftermarket board, it also extends the radios coverage.
Mr Carlson's Lab That's good! He'll certainly dlep bette st night! I did so for my IC-745 (Old Betsy} snd she was a happy camper. By the way, may I know your call sign?
..and I loved your resto on your "Gothic" Hammarlund receiver up the way there! What an inspiration.
William Phinizy Thanks for the comment on the Hammarlund! I PM'ed you my call.
+William Phinizy.. Jeez! Talk about fat fingers! That was supposed to be "sleep better at night" but came out like some Vietnamese epithet. Sorry!
Ha Ha... No worries!
I have so much to learn.
Hi Paul this is Burt - you might remember me asking you to look at my yaesu 857d. I now have a icom 751A - was wondering if you might have some time to look at it. Let me know.
Everytime I go to the Ham radio store they always say Icom and and Yaesu are the same quality radio. I'm sure you know more about it than the sales folks....do you think they are built to the same standards internally? would love to hear your thoughts on both of them.
Can I use a spectrum analyzer in place of a frequency counter?
Hi Paul, nice video!
Had you found also ther errors in bfo section?
Hi Carmine, The SSB and CW reception and transmission was great in this transceiver, so I left it at that. Thanks for the comment!
You might want to repeat the Icom 751A BFO alignment errors for others (like me) who need them. Have you checked that the model 751 manual also has those errors? Thanks... Bruce KQ2E
Hi there. First of all, I thank you for sharing such valuable information with us. I would like to know if you can send me the file that I should use to reprogram an ICOM RAM BOARD from an IC 751A. I have built an interface that I got based on an IC CD4040 and using the ICOM-RAM.EXE program which indicates that the recording process has been carried out correctly, when reading the ICOM RAM again I see that it actually contains information, but when installing the board in the IC 751A the equipment does not work correctly, I would like to try it with a different .BIN than the one I have if you can send it to me. Thank you again for your attention. Greetings from Argentina
The Ram board is available from PIEXX.
Fine thanks you!
Mr. Carlson... I have an ICOM 750 (which I understand is the same as a 751 only sold originally in a different country). I've owned it about 15 years. I've never changed the battery. Would you suggest I let sleeping dogs lie and leave it alone or change it to a new one (and take the precautions you mention)? And thanks for a great video!
Buy the EEPROM version board for $75 US and be done with the problem. But save the old board in case you need it. I built a special double battery backup board with diodes to make changing the battery a "no brainer." THEN I bought the new board. Duh. LOL
Could you explain why not to use an external PSU when changing the battery?
cmdstraker I guess it's just incase the supply voltage should fail, Or a glitch in the supply etc ..
Great action.....
What is your opinion of the Ic-751A Radio ?
I am thinking of buying one .
cadiscase I'm not a fan of the volatile ram issue. I say stay away from it! Go for an older Kenwood or Yaesu.
Mr Carlson's Lab It might make a good video to change out the battery or install one of the battery mods. Just a thought.
Maybe, if another ever comes my way.
Mr Carlson's Lab Any opinion about the IC-765 ?
+Mr Carlson's Lab I appreciate your insight, on this matter! Muchos gracias! I hear a lot of bad feedback about Icom, & TenTech, & Yeasu, etc.
Gee... The battery VRAM backup seems really dodgy. Not even a ROM for factory default settings.
My thoughts exactly!
nice
Thanks!
I hate it when my service manuals are not correct.
Sometimes the service desk of a manufacturer is not up to date to or gives stupid answers.
smbrob I agree!
+Mr Carlson's Lab Engl Guitar amps is famous for having incomplete & just plain wrong information in their schematics. Some of the techs in Germany, where the amps are made, suspect it is done on purpose. All I know is they are so bad, I simply refuse to even acknowledge they exist & pretend they don't. I work on them like no schematic exists. That way, I don't get thrown off by their erroneous information, & it keeps their nonsense from entering my brain, and giving me any preconceived notions, about what they actually did. Turning the amps away at the door, works even better.
old radios and new mistakes always in schematics
I have a hard time believing that both of their original service manuals are this far off.
It can be a disaster when the manual is wrong
Bonjour dommage que tu ne montres pas precicement ou faire les mesures je ne suis pas electronicien t'as video ne m'aide pas beaucoup dommage ! 73 Eric FK8HM
Wheel chock. Hee hee.
what a stupid design. poor product. 👎