Using a 4-gas analyser to diagnose vehicle emissions system problem

Поделиться
HTML-код
  • Опубликовано: 18 янв 2025

Комментарии • 13

  • @ghadiniyomufasha9109
    @ghadiniyomufasha9109 2 года назад

    what are accepted standards of exhaust gas emission by using 4- gas analyzer?

  • @itsmebadboy.
    @itsmebadboy. Год назад

    Can this also tell you the fuel average of a car?

  • @jibrilmaindan2537
    @jibrilmaindan2537 2 года назад

    Where did can buy?

  • @jesuscortez7779
    @jesuscortez7779 4 года назад +1

    how I CAN GET THAT MACHINE

  • @mohitksingh
    @mohitksingh 7 лет назад

    what is the frequency of recording the data, for example does it record the data at every thirty seconds, or one minute or what?

  • @jibrilmaindan2537
    @jibrilmaindan2537 2 года назад

    How much

  • @dynaway
    @dynaway 4 года назад

    can you assist to analyze this result that i have on my car?
    HC - 9
    CO - 0.01%
    CO2 - 10.46%
    O2 - 5.79%
    NOx - 0
    Lamda - 1.22

    • @cipriansofineti346
      @cipriansofineti346 2 года назад +1

      Same, air leak before the lambda probe or clogged injectors, the engine runs lean. the kat its ok.

    • @TheBasicsOfDiag
      @TheBasicsOfDiag 10 месяцев назад +1

      When I've seen oxygen levels as high as that it usually indicates that there is no fuel entering a cylinder. The CO and HC levels confirm this. The cylinder without fuel is just pumping fresh air into the exhaust system. Now that doesn't necessarily mean the fuel system is at fault as an ECU can shut the injector off even if an ignition misfire is the cause. This is to protect the catalytic converter from unburnt fuel.