And another stellar review is in the can. Sadly, my previous suspicions were confirmed. The tires did it a disservice on the six problems. That's unfortunate, but not unexpected. I held much higher hopes for its success, but I am not shocked at the actual performance. But that's okay. Overall, the rig is pretty composed and looks fairly well planted. What it can do, it does well. What it can't do, it tried hard anyway. And it looks pretty good doing it. Even when it fails. This is still a lot of car for the cost. Bigger tires, and/or portal axles, and that's like, problem solved, man. Honestly, I really think the only part that is actually letting this down is the size of the tires. If they were just a bit bigger, and maybe with a little bit softer insert, there really wouldn't be much else to do to it. There are other rigs that can do all six problems with straight axles, I rather think this probably could too. With, you know, the right tires and inserts. And maybe heavier wheels or some added weight on the hubs or something. It doesn't seem like it needs much to be a solid contender. On a side note, those tires are remarkably similar to the old military NDT (Non Directional Tire) bar grip tires in pattern. With better performance, I think. Make 'em bigger and I think this would have had everything but maybe 4 and 6. I am unconvinced that this tread pattern will successfully conquer those two. I'm willing to give it the benefit of the doubt, though, if a larger size were available to test with. Yeah, I still really like this car. Good show, mate. Really enjoyed this one.
Thanks! I really enjoyed making it, too! I've since gotten it out on the rocks again with 4.65" tires and it did better. But I also want to point out that finishing two of the six problems still means it's a very capable machine. I have a LOT of cars here that can't even finish one of these problems, including the Knightrunner, RC4WD TF2, BRX01, MST DC1, etc. The Pro Runner is still a very serviceable rock crawler!
@@RCTNT I'm still fascinated with the Knightrunner and its IFS. I don't even care how it performs on rocks or trail. the implementation is really interesting.
As I've suggested to you before mate, the sort of wrap-up commentary you did in the last few minutes of this video is exactly why I'm becoming such a fan of your channel. It's as if you say to yourself "What are all of the questions someone might ask me if they were right here....ok, now I'll succinctly answer them." Keep up the good work buddy 👍
Thank you! I can't really take credit for that part, not the way you're saying anyway. Because I don't watch reviews or read about these things before I test them, you're actually getting my first thoughts on a car after driving it for the first time, and then again after modding it. We're both learning, honestly! So glad its helpful 😎
@RCTNT ... well if you're doing it on the fly, that also still deserves credit. I worked 20 years as a research engineer, but am now moreso involved in psychology within engineering environments. Experiencing an interaction, and then being able to reflect and effectively convey feedback and improvements in a useful manner is one of the skills you expect from the likes of test pilots and test drivers. You may not even fully be aware that you are pretty effective at this, but you seem to do it better than most RC RUclipsrs. It's a unique attribute to your channel (and it's ever harder to differentiate yourself from the competition these days).
I know this is an older video but I got myself one of these and your videos are the primary reason. I've not had it long yet but I've been loving it so far! My first trail truck/crawler after recently rediscovering RCs. Any advice on upgrades and ideal battery I'd love to hear from you.
I'm really glad you're enjoying the car! It's quite good in stock form, honestly. The usual suspects would go well in this one, of course: brushless servo, Fusion 1800 with stock pinion, injora beadlock wheels and Proline Trenchers 4.19" (not 4.75, they'll be too big). Those changes alone will yield tremendous improvements. I'd probably start with beadlock wheels, then either the servo (like the jx servo 45kg brushless one) or the Trenchers. If you do the Trenchers, be aware the stock foams that they come with are going to be too firm for this car. When you buy the Injora wheels, look into their 4.19" dual stage foams or else their silicone inserts (hard) in 4.19" to suit the tires. But honestly, if you change nothing, you've still got a fantastic rig. Have fun!
Woot! Me too! Honestly, 2 of 6 is still pretty darn good. A lot of trucks here can do just one, or none, especially those with C1-type tires. I've since filmed this running the problems again on 4.65" tires and the results went as you'd probably expect. That video coming soon :)
This thing is pretty cool. I like the look of the tires, very fitting size and tread pattern. Sure it's not a great rock crawler but it looks scale. Probably could out a trx4 bronco grill on it with some customization. I did the trx4 grill on my HB-R1001 with some work.
I got you. Two tests for the Traxxas TRX4 2021 Bronco: With straight axles: ruclips.net/video/3b-KnzZxQUY/видео.html With portals: ruclips.net/video/eX8gyMhe8YM/видео.html
It has a 35t 550 and a wp-1060 on a 2-speed, there's really no reason to upgrade to brushless other than for the battery efficiency. But yes, bigger diameter tires would help and I've done exactly that. Coming soon in a future video!
Nice review! Interesting results. I’ve got a red one coming and this review gives me ideas for improvement …..not much but usually results in my normal upgrades in most of my RTR crawlers…..usually a HW 1800 se set up , wheels/tires and maybe a better steering servo … Overall it looks like it performs pretty good.
@@RCTNT update: got my RTG Prorunner today! Messed around with is some 100% stock….impressed…..then I put some better tires and wheels on it from another rig….amazing what it’ll do with 4.75 tires….looks much better also.. I’m super happy with what I paid ..$360 shipped…..I can barely find this rig in the states and when I do it’s well over $400 just for the truck. Thanks again for the review…big reason why I watch your channel and others like it. Kudos
Lol* *RC-TNT does not endorse nor is affiliated with this user in any manner. Furthermore, users are advised that interaction with this user is at their own risk and RC-TNT, its affiliates, agents and stakeholders cannot be held responsible for any degeneracy experienced by users of the system who chose to interact with this user. Purple monkey dishwasher that monkey is going to pay.
I think 600 isn't cheap lol. but to be fair im usually cheap.. my emo 6x6 I made an exception for I wanted it... but for most situations this rig would suit me fine.. as i don't do a whole lot of crawling... that and i would love to see a larger set of tires and it back on the 6 probelems for my own curosities
Hard to beat, for the money. It looks really great, and I like that colour on it. And the probable performance improvement, just with a better set of wheels, and slightly bigger tyres, has to be a no brained. Are you going to do that, and what other mods (if any?!) are you thinking about? 🤔😄
100% yes, already filmed it with bigger tires, though still on plastic wheels. It doesn't need a lot, maybe just from brass and in this case, weighted wheels, and I think it'll be largely complete!
@@RCTNT I completely forgot about that one. I’m just not the biggest fan of tamiyas crawlers. I wouldn’t mind building a chassis to fit the wheelbase of the body though.
Hi there i love this car, i was looking into the rescuer but this one is a lot cheaper. And im looking for my first 1/10 crawler. I have a tr4m now and im really enjoying it so i want to see if i like 1/10 crawlers as much. Now i was looking on asiatees through the link in your discription and i noticed there arent any parts available. Do you know if they will be and this is only because it is just released?
I don't know if Atees will stock the parts, but they're certainly already available on Ali stores. Many parts are broadly compatible between other vehicles, typically servos and motors, and they're the things that usually break. But for this model, perhaps the magnetic wiring for the lights could be an issue. I found the replacement already, here: s.click.aliexpress.com/e/_mswWQjQ Other things that might need fixing, I'm not sure. I have many cars, as you can see on the channel here, and really the main things that break on crawlers is servos. They're fairly universal, thankfully! (and speaking of universal, the Pro Runner uses steel universals in the front axles, so it's unlikely you'll ever break them).
@RCTNT okey thank you very much for the response, I'm used to my tr4-m in wich I broke: servo, diffs and the drive shaft in like 5 or 6 runs, I drive it outside maybe it can't handle that but it's still not very nice. By the way, I love your reviews everytime I come across a new crawler ik interested in the first thing I do Is see if you did an review on it😅
@tcc8499 haha right, thank you! I can understand your experience with the TRX4m. The smaller scale stuff is usually not as durable as the 1/10 crawlers, which actually might be the sweet spot for ultimate durability, now I think about it. Modern crawlers from any big brand are unlikely to break, and if they do, again it'll be an electronic part that dies from heat, mud or water ingress. Sometimes bearings, now I think of it. These are all fairly universal parts though. But they really are very good overall. You do snap an axle or a drive shaft here and there but it's becoming quite rare. Models are getting very, very good!
Would you recommend it for a first time rc trail/light crawler? Do you know if there are mod parts it (snorkel, roofrack, roof lights and so on) or if maybe it would be possible to 3d print some? Also, do you plan on making a video with the improvement you said and test it again?
Absolutely, yes. I've discussed mods for this in my last live stream, but in short, there is a range of stuff for it from rgt. However, it's performance oriented, and I'll do some of that. 3d printing might be the way to go, though roof racks in particular don't fare well on crawler roofs. A generic metal one would work though, as would anything made for the TRX4 2021 Bronco. As far as a first crawler goes, it's easy to recommend. Have a read of this for more thoughts related to this question: rc-tnt.com/manufacturer/rgt/which-rgt-trail-rig-is-best-for-you/
@@RCTNT I've found that making the roof rack out of TPU results in a moderately flexible and durable fixture. Solid enough to hold its shape and fulfill its function, flexible enough to not break when abused. I've made a couple and none have broken yet, despite repeated rollovers on rough ground. I like to do side mirrors and windscreen wipers the same way, for the same reason. TPU isn't the answer for everything, but it's good for this stuff.
Nice video thank you. I still prefer the look of the rescuer, but the Pro Runner surely is the better crawler (I am yet to read your article with the 3 RGTs being compared).
The Rescuer crawled better in stock form, didn't it? I'll have to go back and check but I thought we got problem 1, 2 and 5 with it. But yes, with bigger tires and some weight in the front axles, I think the Pro Runner will be superior on the rocks. Guess we'll see!
I think we all crave for a second chance on better set of tires... How about the stock Traxxas ones, to see how much of a performance advantage those will do, (if they fit the wheelarches!)?
With C1 friendly tires, it's crazy good to do 2 of 6, honestly! Remember, Knightrunner, MST DC1, BRX01, RCrun RUN80, RC4WD TF2 and Gelande II, and more, are unable to complete even a single problem. But yes, it's a peaky course. The aim was to make to nearly impossible to finish all 6. It needs to be harder, as too many rigs now are finishing all 6. The aim is for comparison, rather than conquest! We want to be able to compare rigs and find their weaknesses. I think the course does that fairly well, though it isn't perfect. Cheers
Is that the Rescuer? I think it is, from memory..? And it did better again with mods. Let's see how this goes with bigger tires and later on, a bit of weight on the front axles. I reckon we'll get it to roughly the level of the Rescuer.
I don't have the r1003 so I can only guess based on what I've seen and what I know. I think you'll find the Pro Runner here to be a more complete vehicle. It's the little things, which I'll list below, that add up to give you a better all round vehicle. It won't need upgrades, unless you want bigger tires and heavier wheels. The stock ones are really quite ok - check out my muddy running video recently, this thing drove 4 hours in muddy slop and was fine. I have many RGT vehicles and they've been getting better and better, in the last couple of years especially. The HB Toys will be cheaper. They've gone their own way with the radio, for example, while RGT is using a known and trusted DumboRC model. The RGT has front uni axles, while the R1003 has weaker CVDs. The light kit is exceptionally good on the RGT, being a DumboRC module with that clever magnetic attachment. I don't know what the HB Toys model is running but it probably isn't as good - though the functions look similar. The RGT is fully waterproof and has a good strong servo. I have a lot of crawlers and the Pro Runner is possibly my top pick for value. It's not a TRX4 clone, they've developed their own car here, though it's a shame the body is unlicensed. Overall, I can't speak to the R1003 but I can absolutely recommend the Pro Runner.
10 месяцев назад+1
@@RCTNT very high quality response and quick too!!! Thx ! Love your channel ! It’s been my reference for a while now. Thx again !
I put the full models and numbers in the description of all my videos, so if you know them by name or by number, the corresponding missing info is in my videos. That includes this one, the RGT Pro Runner EX86130. I expect you'll also find this helpful: rc-tnt.com/manufacturer/rgt/which-rgt-trail-rig-is-best-for-you/
No idea, sorry. I don't really have ftx here. Maybe someone else can answer? (or go look on the FTX website, their models would presumably be there). Cheers
It's an awesome looking rc. I actually think I looks even better than the TRX4.. And yes it's in my opinion not a crawler but a trail truck only. So it a little misguided to take it on a crawler track.
I hear you, but I disagree. A crawler has locked axles, DIG, beadlock wheels, servo on axle, front overdrive. A trail truck has IFS and or open/unlockable diffs, that sort of thing. Clearly the definition is subjective to some point, but I'll say this: Trail rigs have no hope of completing even a single problem on my test course. That this can do two of 6 in stock form speaks to its crawler design. It's really quite good for the tire size, possibly the best crawler available with C1-friendly tires! I've filmed it already with bigger tires and we'll see how that changes things. Then, some basic mods and who knows, we'll see just how far it can go!
@@RCTNT not totally agree with you there. IFS in some cases is even better that a straight axel. So not only made for trail. I'll say if the manufacturer go for a high detail body and class 1 tires they aim for trail truck not a crawler. Yes It will have some crawler elements in it's design. But there is not that many other ways to build a 4x4. I'm not into crawling I build all my trucks to be trail trucks with some abilities to take down some obstacles on the way. But seeing forward for next video.
Sure, fair points too. I have no dispute with you on that and even my real car has IFS up front, though with lockers it'll go nearly anywhere. But yeah, I do see the Pro Runner as a crawler and certainly wouldn't call it misguided to test it on my course - the whole idea is to see how it compares to other crawlers in stock form, which also gives me a benchmark to test effectiveness of mods. And now we know! 😊 (It's such a good crawler, it managed 2 of 6 problems, in fact. I don't think I have any other vehicle with this tire size that could do this, especially with straight axles. My C1 SCX10 III that I drove to 2nd place nationally this year has portal axles and I am pretty sure it can only do problem 1, 2 and 5 - and it is about as optimised a C1 rig as you could make, broadly speaking!)
@@RCTNT hi again I would hear if you could make a comparison of the 3 RGT models the Rescuer the Challenger and the Pro Runner. I have the Rescuer myself and consider to buy the Challenger. How much difference is there?
And another stellar review is in the can. Sadly, my previous suspicions were confirmed. The tires did it a disservice on the six problems. That's unfortunate, but not unexpected. I held much higher hopes for its success, but I am not shocked at the actual performance. But that's okay. Overall, the rig is pretty composed and looks fairly well planted. What it can do, it does well. What it can't do, it tried hard anyway. And it looks pretty good doing it. Even when it fails. This is still a lot of car for the cost. Bigger tires, and/or portal axles, and that's like, problem solved, man.
Honestly, I really think the only part that is actually letting this down is the size of the tires. If they were just a bit bigger, and maybe with a little bit softer insert, there really wouldn't be much else to do to it. There are other rigs that can do all six problems with straight axles, I rather think this probably could too. With, you know, the right tires and inserts. And maybe heavier wheels or some added weight on the hubs or something. It doesn't seem like it needs much to be a solid contender.
On a side note, those tires are remarkably similar to the old military NDT (Non Directional Tire) bar grip tires in pattern. With better performance, I think. Make 'em bigger and I think this would have had everything but maybe 4 and 6. I am unconvinced that this tread pattern will successfully conquer those two. I'm willing to give it the benefit of the doubt, though, if a larger size were available to test with.
Yeah, I still really like this car. Good show, mate. Really enjoyed this one.
Thanks! I really enjoyed making it, too! I've since gotten it out on the rocks again with 4.65" tires and it did better.
But I also want to point out that finishing two of the six problems still means it's a very capable machine. I have a LOT of cars here that can't even finish one of these problems, including the Knightrunner, RC4WD TF2, BRX01, MST DC1, etc. The Pro Runner is still a very serviceable rock crawler!
@@RCTNT I'm still fascinated with the Knightrunner and its IFS. I don't even care how it performs on rocks or trail. the implementation is really interesting.
As I've suggested to you before mate, the sort of wrap-up commentary you did in the last few minutes of this video is exactly why I'm becoming such a fan of your channel. It's as if you say to yourself "What are all of the questions someone might ask me if they were right here....ok, now I'll succinctly answer them."
Keep up the good work buddy 👍
Thank you! I can't really take credit for that part, not the way you're saying anyway. Because I don't watch reviews or read about these things before I test them, you're actually getting my first thoughts on a car after driving it for the first time, and then again after modding it. We're both learning, honestly! So glad its helpful 😎
@RCTNT ... well if you're doing it on the fly, that also still deserves credit.
I worked 20 years as a research engineer, but am now moreso involved in psychology within engineering environments. Experiencing an interaction, and then being able to reflect and effectively convey feedback and improvements in a useful manner is one of the skills you expect from the likes of test pilots and test drivers. You may not even fully be aware that you are pretty effective at this, but you seem to do it better than most RC RUclipsrs. It's a unique attribute to your channel (and it's ever harder to differentiate yourself from the competition these days).
@austinrhubarb haha ok, twist my arm, I'll take that one. Thank you 😊
Thanks for the test!👍, and for the Channel!
Thank you!
Great review man! A rig like that going over the problems sure shows why portals are so handy to have.
This is true! Though larger tires will go a long way here. Have done so, will have that video up soon. Cheers
The 6 problems Rock‼️😁👍👍🦾🦾🤘🤘
😂
I know this is an older video but I got myself one of these and your videos are the primary reason. I've not had it long yet but I've been loving it so far! My first trail truck/crawler after recently rediscovering RCs. Any advice on upgrades and ideal battery I'd love to hear from you.
I'm really glad you're enjoying the car! It's quite good in stock form, honestly. The usual suspects would go well in this one, of course: brushless servo, Fusion 1800 with stock pinion, injora beadlock wheels and Proline Trenchers 4.19" (not 4.75, they'll be too big). Those changes alone will yield tremendous improvements. I'd probably start with beadlock wheels, then either the servo (like the jx servo 45kg brushless one) or the Trenchers.
If you do the Trenchers, be aware the stock foams that they come with are going to be too firm for this car. When you buy the Injora wheels, look into their 4.19" dual stage foams or else their silicone inserts (hard) in 4.19" to suit the tires.
But honestly, if you change nothing, you've still got a fantastic rig. Have fun!
@@RCTNT Exactly what I was looking for, thank you! And thanks for the quick response!
What a cool truck! Glad you didn’t blow away testing it!
It's had a 4 hour run in greasy clay and muddy water on 3s and hasn't missed a beat. This is a fabulous machine.
I love it ! I definitely agree on some taller tires for this!
Woot! Me too! Honestly, 2 of 6 is still pretty darn good. A lot of trucks here can do just one, or none, especially those with C1-type tires. I've since filmed this running the problems again on 4.65" tires and the results went as you'd probably expect. That video coming soon :)
This thing is pretty cool. I like the look of the tires, very fitting size and tread pattern. Sure it's not a great rock crawler but it looks scale. Probably could out a trx4 bronco grill on it with some customization. I did the trx4 grill on my HB-R1001 with some work.
It actually crawls alright, IMO. These are tough problems. Bigger tires will help.
I like your idea about the grill too.
Great vid wind and all! Like you said probably a great trail truck, RGT makes some nice rigs, thanks for your time.
Glad you enjoyed it, thank you.
Cool and Awesome Testing!!!💪🏻🏆
Thanks! 👍
For me is a Brother of the RGT EX86170 CHALLENGER but whit no Portal Axels!
I like 👍 it ! but I have weird obsession with Rgt...lol
I wouldn't know, this is my only RGT
Interested in seeing how it does against the traxxas
I got you. Two tests for the Traxxas TRX4 2021 Bronco:
With straight axles: ruclips.net/video/3b-KnzZxQUY/видео.html
With portals: ruclips.net/video/eX8gyMhe8YM/видео.html
wonder if there is a set of portal axles that would fit this truck.If you could then that and some new tires and maybe a fusion SE.
It has a 35t 550 and a wp-1060 on a 2-speed, there's really no reason to upgrade to brushless other than for the battery efficiency. But yes, bigger diameter tires would help and I've done exactly that. Coming soon in a future video!
Nice review! Interesting results. I’ve got a red one coming and this review gives me ideas for improvement …..not much but usually results in my normal upgrades in most of my RTR crawlers…..usually a HW 1800 se set up , wheels/tires and maybe a better steering servo …
Overall it looks like it performs pretty good.
That's about it, though the servo is pretty good for an RTR. I think you'll be happy with it!
@@RCTNT update: got my RTG Prorunner today! Messed around with is some 100% stock….impressed…..then I put some better tires and wheels on it from another rig….amazing what it’ll do with 4.75 tires….looks much better also..
I’m super happy with what I paid ..$360 shipped…..I can barely find this rig in the states and when I do it’s well over $400 just for the truck.
Thanks again for the review…big reason why I watch your channel and others like it. Kudos
That is awesome. Thanks heaps for letting me know! Enjoy the rig, she's a beauty!
That is awesome. Thanks heaps for letting me know! Enjoy the rig, she's a beauty!
1:07 "it finished but it was messy" that's how I ALWAYS finish!!!!
Lol*
*RC-TNT does not endorse nor is affiliated with this user in any manner. Furthermore, users are advised that interaction with this user is at their own risk and RC-TNT, its affiliates, agents and stakeholders cannot be held responsible for any degeneracy experienced by users of the system who chose to interact with this user. Purple monkey dishwasher that monkey is going to pay.
I think 600 isn't cheap lol. but to be fair im usually cheap.. my emo 6x6 I made an exception for I wanted it... but for most situations this rig would suit me fine.. as i don't do a whole lot of crawling... that and i would love to see a larger set of tires and it back on the 6 probelems for my own curosities
I understand you can have it for usd$380 delivered. That seems pretty good.
But I've run the thing on bigger tires and I'll share that video soon 👍
Hard to beat, for the money. It looks really great, and I like that colour on it. And the probable performance improvement, just with a better set of wheels, and slightly bigger tyres, has to be a no brained. Are you going to do that, and what other mods (if any?!) are you thinking about? 🤔😄
100% yes, already filmed it with bigger tires, though still on plastic wheels. It doesn't need a lot, maybe just from brass and in this case, weighted wheels, and I think it'll be largely complete!
I wish a company would make the shorter wheelbase two door version. I’ve not seen one yet, in any scale.
How about this?
ruclips.net/video/sBJGxC6idXg/видео.html
@@RCTNT I completely forgot about that one. I’m just not the biggest fan of tamiyas crawlers. I wouldn’t mind building a chassis to fit the wheelbase of the body though.
I think that would be the way to go if you wanted it to be capable, yes!
@@RCTNT I really like the look of the MST chassis. About to watch your review of the CFX-WS
@cody41895 it's not super capable but is night and day better than the CC02, lol!
Hi there i love this car, i was looking into the rescuer but this one is a lot cheaper. And im looking for my first 1/10 crawler. I have a tr4m now and im really enjoying it so i want to see if i like 1/10 crawlers as much. Now i was looking on asiatees through the link in your discription and i noticed there arent any parts available. Do you know if they will be and this is only because it is just released?
I don't know if Atees will stock the parts, but they're certainly already available on Ali stores.
Many parts are broadly compatible between other vehicles, typically servos and motors, and they're the things that usually break.
But for this model, perhaps the magnetic wiring for the lights could be an issue. I found the replacement already, here:
s.click.aliexpress.com/e/_mswWQjQ
Other things that might need fixing, I'm not sure. I have many cars, as you can see on the channel here, and really the main things that break on crawlers is servos. They're fairly universal, thankfully! (and speaking of universal, the Pro Runner uses steel universals in the front axles, so it's unlikely you'll ever break them).
@RCTNT okey thank you very much for the response, I'm used to my tr4-m in wich I broke: servo, diffs and the drive shaft in like 5 or 6 runs, I drive it outside maybe it can't handle that but it's still not very nice. By the way, I love your reviews everytime I come across a new crawler ik interested in the first thing I do Is see if you did an review on it😅
@tcc8499 haha right, thank you!
I can understand your experience with the TRX4m. The smaller scale stuff is usually not as durable as the 1/10 crawlers, which actually might be the sweet spot for ultimate durability, now I think about it. Modern crawlers from any big brand are unlikely to break, and if they do, again it'll be an electronic part that dies from heat, mud or water ingress. Sometimes bearings, now I think of it. These are all fairly universal parts though. But they really are very good overall.
You do snap an axle or a drive shaft here and there but it's becoming quite rare. Models are getting very, very good!
@RCTNT okey thank you, I only have experience with the 1/18 yet because I'm just getting into the hobby so thank you very much for the help
Would you recommend it for a first time rc trail/light crawler? Do you know if there are mod parts it (snorkel, roofrack, roof lights and so on) or if maybe it would be possible to 3d print some?
Also, do you plan on making a video with the improvement you said and test it again?
Absolutely, yes. I've discussed mods for this in my last live stream, but in short, there is a range of stuff for it from rgt. However, it's performance oriented, and I'll do some of that.
3d printing might be the way to go, though roof racks in particular don't fare well on crawler roofs. A generic metal one would work though, as would anything made for the TRX4 2021 Bronco.
As far as a first crawler goes, it's easy to recommend. Have a read of this for more thoughts related to this question:
rc-tnt.com/manufacturer/rgt/which-rgt-trail-rig-is-best-for-you/
@@RCTNT I've found that making the roof rack out of TPU results in a moderately flexible and durable fixture. Solid enough to hold its shape and fulfill its function, flexible enough to not break when abused. I've made a couple and none have broken yet, despite repeated rollovers on rough ground. I like to do side mirrors and windscreen wipers the same way, for the same reason. TPU isn't the answer for everything, but it's good for this stuff.
That's a great idea, one I should have remembered from your little care package! Good call!
Nice video thank you. I still prefer the look of the rescuer, but the Pro Runner surely is the better crawler (I am yet to read your article with the 3 RGTs being compared).
The Rescuer crawled better in stock form, didn't it? I'll have to go back and check but I thought we got problem 1, 2 and 5 with it.
But yes, with bigger tires and some weight in the front axles, I think the Pro Runner will be superior on the rocks. Guess we'll see!
@@RCTNT you re right, I mixed it up with a different one.
Well I still think you're right - once the pro runner has more appropriate shoes on!
First RC fan 😅
I think we all crave for a second chance on better set of tires... How about the stock Traxxas ones, to see how much of a performance advantage those will do, (if they fit the wheelarches!)?
+1 on this. I am waiting for my Pro Runner delivery, and I have spares from TRX-4. It would be nice free upgrade out of the box.
I've already done exactly that. Next video!
@@RCTNT I got mine today! With TAX it costs me 292$. You can not beat that value.
Wow, true. That's amazingly good.
Hey, at least the remote lights up.
A brilliant feature, you bet!
I was hoping it'd do better 😮
But you do have loads of breakover obstacles
With C1 friendly tires, it's crazy good to do 2 of 6, honestly! Remember, Knightrunner, MST DC1, BRX01, RCrun RUN80, RC4WD TF2 and Gelande II, and more, are unable to complete even a single problem.
But yes, it's a peaky course. The aim was to make to nearly impossible to finish all 6. It needs to be harder, as too many rigs now are finishing all 6.
The aim is for comparison, rather than conquest! We want to be able to compare rigs and find their weaknesses. I think the course does that fairly well, though it isn't perfect. Cheers
do you have any idea how to turn off hazard light? it turned on randomly, i have no idea how to turn it off, thanks
Hi Benny, that has happened to me as well. I haven't worked it out yet, but I'll have a go at it and let you know if I do. Cheers
thx so much @@RCTNT
會不會是翻車之後就會出現？
@@skb2000tw 不是啦 so random的
@@bennywongbbb 我也是不知道如何開啟跟關閉😄突然就出現了
Hmmm, thinks tracker & pro runner on equal ground although tracker did manage to 3 problems, 🤔🤔
Is that the Rescuer? I think it is, from memory..? And it did better again with mods.
Let's see how this goes with bigger tires and later on, a bit of weight on the front axles. I reckon we'll get it to roughly the level of the Rescuer.
How would it compare to the HB Toys Beluga ?
I don't have the r1003 so I can only guess based on what I've seen and what I know. I think you'll find the Pro Runner here to be a more complete vehicle. It's the little things, which I'll list below, that add up to give you a better all round vehicle.
It won't need upgrades, unless you want bigger tires and heavier wheels. The stock ones are really quite ok - check out my muddy running video recently, this thing drove 4 hours in muddy slop and was fine.
I have many RGT vehicles and they've been getting better and better, in the last couple of years especially.
The HB Toys will be cheaper. They've gone their own way with the radio, for example, while RGT is using a known and trusted DumboRC model. The RGT has front uni axles, while the R1003 has weaker CVDs. The light kit is exceptionally good on the RGT, being a DumboRC module with that clever magnetic attachment. I don't know what the HB Toys model is running but it probably isn't as good - though the functions look similar. The RGT is fully waterproof and has a good strong servo.
I have a lot of crawlers and the Pro Runner is possibly my top pick for value. It's not a TRX4 clone, they've developed their own car here, though it's a shame the body is unlicensed. Overall, I can't speak to the R1003 but I can absolutely recommend the Pro Runner.
@@RCTNT very high quality response and quick too!!! Thx ! Love your channel ! It’s been my reference for a while now. Thx again !
My pleasure, I am glad it was helpful 😊
@@RCTNT don’t want to abuse but I have another question… can’t seems to figure out the naming skims of RGT brand…
I put the full models and numbers in the description of all my videos, so if you know them by name or by number, the corresponding missing info is in my videos. That includes this one, the RGT Pro Runner EX86130.
I expect you'll also find this helpful:
rc-tnt.com/manufacturer/rgt/which-rgt-trail-rig-is-best-for-you/
Is there an ftx version of this ?
No idea, sorry. I don't really have ftx here. Maybe someone else can answer? (or go look on the FTX website, their models would presumably be there). Cheers
It's an awesome looking rc. I actually think I looks even better than the TRX4.. And yes it's in my opinion not a crawler but a trail truck only. So it a little misguided to take it on a crawler track.
I hear you, but I disagree. A crawler has locked axles, DIG, beadlock wheels, servo on axle, front overdrive. A trail truck has IFS and or open/unlockable diffs, that sort of thing.
Clearly the definition is subjective to some point, but I'll say this: Trail rigs have no hope of completing even a single problem on my test course. That this can do two of 6 in stock form speaks to its crawler design. It's really quite good for the tire size, possibly the best crawler available with C1-friendly tires!
I've filmed it already with bigger tires and we'll see how that changes things. Then, some basic mods and who knows, we'll see just how far it can go!
@@RCTNT not totally agree with you there. IFS in some cases is even better that a straight axel. So not only made for trail.
I'll say if the manufacturer go for a high detail body and class 1 tires they aim for trail truck not a crawler. Yes It will have some crawler elements in it's design. But there is not that many other ways to build a 4x4.
I'm not into crawling I build all my trucks to be trail trucks with some abilities to take down some obstacles on the way.
But seeing forward for next video.
Sure, fair points too. I have no dispute with you on that and even my real car has IFS up front, though with lockers it'll go nearly anywhere.
But yeah, I do see the Pro Runner as a crawler and certainly wouldn't call it misguided to test it on my course - the whole idea is to see how it compares to other crawlers in stock form, which also gives me a benchmark to test effectiveness of mods. And now we know! 😊
(It's such a good crawler, it managed 2 of 6 problems, in fact. I don't think I have any other vehicle with this tire size that could do this, especially with straight axles. My C1 SCX10 III that I drove to 2nd place nationally this year has portal axles and I am pretty sure it can only do problem 1, 2 and 5 - and it is about as optimised a C1 rig as you could make, broadly speaking!)
@@RCTNT I understand. And it makes good sense to test it on the same way as all the others to make a point. And to compare.
@@RCTNT hi again I would hear if you could make a comparison of the 3 RGT models the Rescuer the Challenger and the Pro Runner. I have the Rescuer myself and consider to buy the Challenger. How much difference is there?
🖐😁👍