Good morning Glen! Waiting on my 63 F100. I have an OG 61 F100 in my display case. Same kit except the grille and the 63 side trim. And another 61 F100 in my back yard. Bought the big one in 1976. Love that truck. Back in 77 I couldn't find any parts for the original 292 V8. So I swapped in the Mighty 390. Edelbrock manifold and AFB (later sold as Edelbrock too) with Crane cam and long tube headers. Pushing through a C6 auto trans to replace the manual 3 on the tree. After putting over 400K miles on that engine, I swapped in a 428 Cobra Jet out of a 1970 Cougar Eliminator. Indian blanket upholstery. US brand slot mags with BFG tires. Original Aquamarine light turquoise paint color. Double 18 gallon auxilliary saddle tanks and anothe 12 gallon in the bed for a total of 66 gallons. Kinda costly to fill all at once. But it will go over 700 miles on a fillup. Sometimes carries a slide in crank up camper, not a shell like in the 63 kit. Sometimes carries a lumber/metal rack for business use, depending on whether I'm wearing a carpenter's hard hat or a fabricator's welding hat. Sometimes open to haul dirt bikes or whatever. Sometimes tows my car trailer for my desert offroad race buggy. OK. Got a lot more to say but there's an omelette with onions, bell pepper, cheese and cilantro with bacon waiting. So C-ya in a while.
Make no bones about it - Saturdays with Glen are FUN :) ! Like that camper truck - driveshaft built in :) !! That ANGLIA is gonna be SWEET !!! Have a GREAT weekend :) !
Glen, When you showed the diamond plate sheet, I thought 🤔 of a wrecker! It is great stuff! Nice Ford Fleet side w camper cap! "Yellow Fever"🤒 is sharp! Parts packs sell the kit!!! 🙃👍👍👍
Mmmmm. That was good breakfast. I cooked it for the wife and me while I was writing that comment before. Dishes washed an' I'm back. I HATE those wheels in the 60 and 63 F100s with the tire tabs. Just like the rims for the Revell 57 Fords. Makes it difficult to swap wheels and tires. The Herman wrecker is coming along. Those A pillars and doors are like to be a PITA. Maybe cut the door tops off? You've been cranking out the models pretty quick. The Trabant is looking great. The Fiat Altered too. I have a couple or 3 of those, plus a spare body shell to put on a Bantam blast chassis. Of course I have a couple each of the Bantam and 25 T Parts Pack body shells left from the 60s too. I wish Atlantis would start marketing the Parts Packs. They have the molds. And some, like the suspension for all the old Revell parts pack chassis would be AWFUL nice to be able to buy separately. That particular sprue frame of parts is used for: - Mooneyes Dragster - The soon to be issued Kent Fuller Dragster - The Yellow Fever Fiat altered you show here - The 25 T altered soon to be issued And can be used for MANY other projects too. Each Mooneyes dragster comes with the 25 T altered/hotrod frame. Plus I have 3 or 4 of those chrome plated from Parts Packs I bought in the 60s. So I have some use for the suspension parts there. I also have a couple of 1960s tubular roadster frames as included in the Yellow Fever kit. Need suspension parts for those too. I have Mooneyes frames and Kent Fuller frame Parts packs from the 1960s as well. So while I MIGHT have a couple of quick changes in the dwindling parts box supply and can fabricate front axles, I have need of more of those suspension parts packs. They were hens teeth in the 1960s and still seem to be. Nobody EVER sells those suspension packs, Not even out of the new releases on evilbay. And if I keep buying whole kits to get them I'm gonna need to sell off the leftovers on evilbay myself. So... Now back to the regular scheduled program and watch past 5 minutes of the video. Shut up for a while Richard!
Hi Richard whoooo yeah buddy now that's a good comment sorry about the other comment you made,,my phone is messed up,,the top left of the screen is black now and the bottom is covered with line's running across it, and I couldn't get the phone to work with me,,it's behaving right now but who knows when it will cut out again,,really really enjoyed reading your two comments,,I hope this is getting to you,,I'll do my show or at least try to do it so if you don't see it tomorrow morning you'll know why,,thanks again buddy for the cool comments and for watching,,later Glen
Well Glen, there's just one problem with the f100 camper kit. The drive shaft is molded in. That's going to require a lot of extra work to remove it in order to match your other builds. Lol. My father had one of those unibody fords when I was a kid. I hated that thing. I learned most of my mechanical skills trying to keep it on the road. Today, being in my 50s, I'd give anything to have it back. Funny how things change.
Hi Mike that truck is a excellent kit I'm looking forward to building it mine was a 64 Pontiac tempest spent most of 2 summers working on that thing and getting it running,,really miss that car wish I still had it,,later buddy Glen
Nice shout out for Rick. Nice stash adds. The Yellow Fever is a Great kit. Love the progress on the Anglia. The Outta Controls are Very Cool!!! I'll be watching
Thanks for the shout out Glen. The yellow fever Fiat kit is all made up of parts packs. Even the Fiat body was once a Revell parts pack. Cool stuff Glen. Have a great week end.
Once again I've enjoyed you video .your enthusiasm is contagious. Your .models are second to none .gone go out and get me two of those kits You Gave .me some ideas I want to try. 😊
you got puppies -I got cats -they hang out with me -sit on my desk-or climb on me while I'm trying to work on models -after you give them attention -they go somewhere and sleep--shake a rattle can and they run
Sounds more like my dogs they do all that stuff and more,,but where would we be without them,,really appreciate you watching and commenting buddy later Glen
Awesome as always, Glen. The Trabi is going to be sweet. I love those old parts packs. I wish I could find the Fiat as cheap as I found the Mooneyes. I bought 3 of those at $15 each last month.
Fun video, didn’t seem that long! When I was 12 or 13, back in the mid 70’s, my stepdad bought an old 61 Ford unibody short box. It was pretty beat up , but I thought it was cool, because a previous owner had swapped Mustang buckets into the cab. Always a good time watching your videos.
Thanks buddy I really appreciate the comment ,,those old Fords must have been very rare you're lucky to have seen one, even beat up ha, gonna make a cool model tho, later Glen
Love that unibody Ford pickup. It's gonna be COOL. The Fiat sounds like a must have kit. You are bang on regarding the stance of the Anglia. Keep up the great work Glren!!! I've been busy watching the NHL's Stanley Cup playoffs. Many cheers from Nova Scotia
Hi Ken,,my phone has been messed up all week right now the left top of the screen is blacked out and the bottom half has lines running through it,,it's always something (; glad you liked the models and thanks for watching and commenting buddy I'll have a new phone next week and my show should go out OK this week,,thanks again buddy later Glen
Aw now i have to buy the Yellow Fever Glenn! I didn't know it has all of those parts and it's a cool kit! Your Anglia is going to be cool! Outta of Control 3 is awesome! 😎👍
Great kit reviews! I've been working on a front axle for a 32 Ford of mine and you just showed the exact axle Ive been looking for. Thanks for sharing.
Good morning Glen!
Waiting on my 63 F100. I have an OG 61 F100 in my display case. Same kit except the grille and the 63 side trim. And another 61 F100 in my back yard. Bought the big one in 1976. Love that truck. Back in 77 I couldn't find any parts for the original 292 V8. So I swapped in the Mighty 390. Edelbrock manifold and AFB (later sold as Edelbrock too) with Crane cam and long tube headers. Pushing through a C6 auto trans to replace the manual 3 on the tree. After putting over 400K miles on that engine, I swapped in a 428 Cobra Jet out of a 1970 Cougar Eliminator. Indian blanket upholstery. US brand slot mags with BFG tires. Original Aquamarine light turquoise paint color. Double 18 gallon auxilliary saddle tanks and anothe 12 gallon in the bed for a total of 66 gallons. Kinda costly to fill all at once. But it will go over 700 miles on a fillup. Sometimes carries a slide in crank up camper, not a shell like in the 63 kit. Sometimes carries a lumber/metal rack for business use, depending on whether I'm wearing a carpenter's hard hat or a fabricator's welding hat. Sometimes open to haul dirt bikes or whatever. Sometimes tows my car trailer for my desert offroad race buggy.
OK. Got a lot more to say but there's an omelette with onions, bell pepper, cheese and cilantro with bacon waiting. So C-ya in a while.
Better than Saturday morning cartoons!!❤❤❤
Wow, thanks! I really appreciate that buddy,,later Glen
Glad to. See red white and YELLOW
Thanks for the great show Mr Glen the Traban will be a hand full down the track!!!👌👌👌👌
Yeah buddy you got that right,,thanks for watching buddy later
Make no bones about it - Saturdays with Glen are FUN :) ! Like that camper truck - driveshaft built in :) !! That ANGLIA is gonna be SWEET !!! Have a GREAT weekend :) !
Thanks Bobby really appreciate you watching and commenting buddy glad you liked the show,,later Glen
Tail shaft !! Wasn't expecting that. Well played sir. All the little car gassers look great.
Thanks so much buddy,, I wasn't expecting that either,, glad you liked the gassers,,have a great week ahead later Glen
Nice work on your current projects. Nice look at the kit full of parts packs. Thanks for sharing.
Thanks for watching Michael
Like those 57 Plymouth hubcaps in the F1oo kit. Thanks for another great way to start Saturday morn.
Thank you kindly frank yeah those caps are cool thanks so much for watching my friend later buddy Glen
Glen, When you showed the diamond plate sheet, I thought 🤔 of a wrecker! It is great stuff! Nice Ford Fleet side w camper cap! "Yellow Fever"🤒 is sharp! Parts packs sell the kit!!! 🙃👍👍👍
Yeah buddy I got it for building a wrecker,,thanks for watching Mark I appreciate you buddy
@@glensmodels My pleasure, Glen! Say hello to Don & The Pups🐶
You never have to worry whether or not I watch the whole video Glen.
I'm glad to hear that James, thank you, later Glen
That Atlantis kit is awesome ...build it. And still have mega leftovers...build your own chassis ,and still have mega leftovers. Love the show , sp0rt
Thanks Tony I agree, great kit thanks for watching buddy later Glen
Awesome show Glen! I'm supposed to get my 63 ford pickup today, been waiting 2 months also. Now I want one of those little fiats!
Hey buddy glad you finally got your 63 Ford truck,,that fiat is a very cool kit thanks for watching,,later Glen
Mmmmm. That was good breakfast. I cooked it for the wife and me while I was writing that comment before. Dishes washed an' I'm back.
I HATE those wheels in the 60 and 63 F100s with the tire tabs. Just like the rims for the Revell 57 Fords. Makes it difficult to swap wheels and tires.
The Herman wrecker is coming along. Those A pillars and doors are like to be a PITA. Maybe cut the door tops off?
You've been cranking out the models pretty quick. The Trabant is looking great.
The Fiat Altered too. I have a couple or 3 of those, plus a spare body shell to put on a Bantam blast chassis. Of course I have a couple each of the Bantam and 25 T Parts Pack body shells left from the 60s too. I wish Atlantis would start marketing the Parts Packs. They have the molds. And some, like the suspension for all the old Revell parts pack chassis would be AWFUL nice to be able to buy separately. That particular sprue frame of parts is used for:
- Mooneyes
Dragster
- The soon to be issued Kent Fuller Dragster
- The Yellow Fever Fiat altered you show here
- The 25 T altered soon to be issued
And can be used for MANY other projects too. Each Mooneyes dragster comes with the 25 T altered/hotrod frame. Plus I have 3 or 4 of those chrome plated from Parts Packs I bought in the 60s. So I have some use for the suspension parts there. I also have a couple of 1960s tubular roadster frames as included in the Yellow Fever kit. Need suspension parts for those too. I have Mooneyes frames and Kent Fuller frame Parts packs from the 1960s as well. So while I MIGHT have a couple of quick changes in the dwindling parts box supply and can fabricate front axles, I have need of more of those suspension parts packs. They were hens teeth in the 1960s and still seem to be. Nobody EVER sells those suspension packs, Not even out of the new releases on evilbay. And if I keep buying whole kits to get them I'm gonna need to sell off the leftovers on evilbay myself.
So... Now back to the regular scheduled program and watch past 5 minutes of the video. Shut up for a while Richard!
Hi Richard whoooo yeah buddy now that's a good comment sorry about the other comment you made,,my phone is messed up,,the top left of the screen is black now and the bottom is covered with line's running across it, and I couldn't get the phone to work with me,,it's behaving right now but who knows when it will cut out again,,really really enjoyed reading your two comments,,I hope this is getting to you,,I'll do my show or at least try to do it so if you don't see it tomorrow morning you'll know why,,thanks again buddy for the cool comments and for watching,,later Glen
These one-piece Ford trucks were rare back when they were new. I believe they were only produced in 62, and 63. Not sure. Cool build.
Thanks for the info John really appreciate it buddy later Glen
Well Glen, there's just one problem with the f100 camper kit. The drive shaft is molded in. That's going to require a lot of extra work to remove it in order to match your other builds. Lol.
My father had one of those unibody fords when I was a kid. I hated that thing. I learned most of my mechanical skills trying to keep it on the road. Today, being in my 50s, I'd give anything to have it back. Funny how things change.
Hi Mike that truck is a excellent kit I'm looking forward to building it mine was a 64 Pontiac tempest spent most of 2 summers working on that thing and getting it running,,really miss that car wish I still had it,,later buddy Glen
Nice shout out for Rick. Nice stash adds. The Yellow Fever is a Great kit. Love the progress on the Anglia. The Outta Controls are Very Cool!!! I'll be watching
Thanks Michael I'm glad you liked the builds ,appreciate the comment buddy later Glen
Nice shout out. Stash adds I to pick up the yellow fever for parts the moon eyes dragster is parts packs as well. projects are moving along nicely.
Hey Phil buddy thanks for watching and commenting I have a mooneyes,,,lots of extras in that one,,later Glen
The Anglia looks cool. Can't wait to see it finished.
Thanks Ron and thanks for watching buddy
😂😂😂 Bare Bones 😂😂😂 Biggerized. 😂😂😂 great show, Glen!
Thank you Don I always appreciate your comments buddy thanks again later Glen
Cool stash models and I love the Anglia! I had no idea there were three versions of the "Outta Control" models.
Me neither, haa,,,the Anglia is coming along nicely thanks for watching and commenting buddy later Glen
Awesome builds, my Saturday morning show I watch every Saturday morning..
Awesome! Thank you Troy I really appreciate it buddy,,later Glen
Thanks for the shout out Glen. The yellow fever Fiat kit is all made up of parts packs. Even the Fiat body was once a Revell parts pack. Cool stuff Glen. Have a great week end.
Hi Rick no prob on the shout out ya got a good show,,didn't know the fiat was parts pack thanks for the info buddy later Glen
Great video and builds
Thanks extra n Glen, glad you liked the show buddy later Glen with one n,
Once again I've enjoyed you video .your enthusiasm is contagious. Your .models are second to none .gone go out and get me two of those kits
You
Gave .me some ideas I want to try. 😊
Awesome! Thank you glad I could help thanks for watching buddy
you got puppies -I got cats -they hang out with me -sit on my desk-or climb on me while I'm trying to work on models -after you give them attention -they go somewhere and sleep--shake a rattle can and they run
Sounds more like my dogs they do all that stuff and more,,but where would we be without them,,really appreciate you watching and commenting buddy later Glen
Awesome builds Glen, enjoy the weekend buddy, 😎👍
Thanks ol'tom glad you liked the builds,,hope you have a great week ahead buddy later Glen
So THAT'S why he likes that kit! 🤸🎸
Yup you called it buddy,, later Glen
Awesome builds Glen k.u.t.g.w.
Thanks Jeff appreciate it buddy
Awesome as always, Glen. The Trabi is going to be sweet.
I love those old parts packs. I wish I could find the Fiat as cheap as I found the Mooneyes. I bought 3 of those at $15 each last month.
Hi Red, yeah buddy those parts pack are great Trabant is coming along nicely thank you kindly buddy for watching and commenting I really appreciate it
Fun video, didn’t seem that long! When I was 12 or 13, back in the mid 70’s, my stepdad bought an old 61 Ford unibody short box. It was pretty beat up , but I thought it was cool, because a previous owner had swapped Mustang buckets into the cab. Always a good time watching your videos.
Thanks buddy I really appreciate the comment ,,those old Fords must have been very rare you're lucky to have seen one, even beat up ha, gonna make a cool model tho, later Glen
Love that unibody Ford pickup. It's gonna be COOL. The Fiat sounds like a must have kit. You are bang on regarding the stance of the Anglia. Keep up the great work Glren!!! I've been busy watching the NHL's Stanley Cup playoffs. Many cheers from Nova Scotia
Hi Ken,,my phone has been messed up all week right now the left top of the screen is blacked out and the bottom half has lines running through it,,it's always something (; glad you liked the models and thanks for watching and commenting buddy I'll have a new phone next week and my show should go out OK this week,,thanks again buddy later Glen
Man, that's such a state of the art machine shop you got their!!
And it didn't even cost very much,,thanks for the comment buddy later Glen
Great video Glen! I remember some of the parts packs being all chrome. Have a great day brother.
Hi Rick yeah a lot of the parts packs were chrome,,,made them hard to assemble,,
Cool video Glen, All the drag cars are great. Ron
Thanks Ron I appreciate it buddy
4:10 ❤ very cool kit
Thanks guy's
Great video Glen
Thank you kindly Maurel
looks good those cars a lot of kits you got thanks for sharing
Thanks for watching Theo
Love yr work bro...
Always watch from Downunder Oz...
I,m a gasser builder myself, you give me some great ideas..
Take Care Glen...
Wayne...👍👍👍👍
That's awesome Wayne glad I could help thanks so much for watching buddy later Glen
Nice kit reviews, looks like you have lots of parts in stock now. My favourite is the Outta Control II.
Thanks Steve I like them all,,but I'm biased haa
Aw now i have to buy the Yellow Fever Glenn! I didn't know it has all of those parts and it's a cool kit! Your Anglia is going to be cool! Outta of Control 3 is awesome! 😎👍
Thanks Mike, yellow fever has a wealth of cool parts,,I used parts from it on the Trabant,,thanks for watching buddy later Glen
Love the video title 😂 watching 👀 I'll be back at the end 👍🇦🇺🦘🏔
Haaaa glad you liked it my friend
Great kit reviews! I've been working on a front axle for a 32 Ford of mine and you just showed the exact axle Ive been looking for. Thanks for sharing.
Way cool Alan glad I could help buddy,,later Glen
Kick ass as always
Thanks my friend later Glen
Love the channel!!!
Thanks Michael
You have a tough audience!!! Great video Numero Uno!!!
I appreciate that,,hi Pamela it's not easy telling joke's when you can't hear anyone laughing,,thanks for watching buddy later gater Glen
What a stellar group of hot rods!!!
Oh. Does the band do the song bony marony? Don't know why that came to mind
Hey Dave glad you liked the models,,I'm pretty sure zilla's boy's can play anything,,thanks for the comment buddy later Glen
Good stuff Glen
Thank you my friend
Lol😂
Thanks Terry appreciate the comment buddy
😄👍
Thank you Mars
❤hi
Hi sis
Comment
Haaaaaaa yeah buddy that's funny thanks