Here's one option: books.industrialpress.com/9780831142315/machinerys-handbook-and-calc-pro-2-combo-large-print/ ;) (Wait, do I get points for having a Machinery's Handbook? I doubt it, because it's not really for the electronics aspects of things... but... I've got one! And the calculator... though I just counted in my head, even though the calculator is right within reach.)
I prefer something that looks like a calendar.... but is actually sliding whiteboard squares. Use it for keeping track of what I'm working on in my autistic mind. I tend to have 4-5 different things I need to work on at the same time and visualizing it makes it easier to prioritize. They slide in case I change my mind or want to reorganize my thoughts 😉
@Keysight Labs I've literally got so many and they're all filled with notes and I've lost a few that have info on some circuits I'm going to teach kids. Over 1000 pages last count.
My work bench has a 59 by your score. Things you missed that I find useful: a light source/magnifier on a pose-able arm, fabric tape for touch screen repairs, masking tape for labels.
@@sammyk7024 My bad! 😬 I figured the window in your kitchen was unlocked because you weren't using the potato sitting on your kitchen counter. Can you help a brother out and let me keep half? I'll even give you the half without bite marks in it! 😎👍
Where did you get an empty room? I have stuff piled up everywhere, and stuff in storage. I can't even get to my "bench" area because of all the "I'll save that (insert non-working electronic device) and I can fix it later when I get a chance" things piled on it.
@Frankie Bleddyn This presentation is targeted at hobbyist audiences. Professionals already know or have most of the equipment they need. While Keysight's products are among the very best, they are extremely hard to justify for the non-professional. There are numerous other products offering a far better value such as Rigol, Uni-T and Sigilent. To get the equivalent functionality of a $300 Rigol from Keysight, you'd spend well over $2K or more. I was hoping this marketing campaign repositioned their products to be more competitive to hobbyists. Since they failed to do so, I am suspicious of this being more of an act of desperation. They are several high-end equipment manufacturers and only so many high-end customers. The market is also becoming increasingly saturated and competitive with tons of products offering tremendous amount of value for the price. Perhaps, Keysight is conducting market research to gauge profitability in the hobbyist space. It would have been cheaper and far more effective if they priced one of their existing scopes to compete with Rigol and the other value brands, instead of trying to scam us with sweepstakes.
@Frankie Bleddyn No, (only when I’m tinkering with QRP HF antennas) but I do have an unhealthy addiction to analouge vintage Rohde & Schwarz gear, leaning slightly toward RF related test and calibration gear. (I used to repair mostly high-end consumer gear at a Panasonic Center for a living.)
79 points! Sort of, and when I say sort of my fire extinguisher and protective glasses are in the kitchen where my 3D printers live right now, keeping my first aid kit company. Can my house be my lab? My house is my lab!
I find lots of good light reduces the need for magnification, though not always entirely. I like having a (cheap) microscope that let's me snap pictures quickly. For de-soldering, I find a "solder sucker" great for the initial blob and I save the wick for the last remnants. A _small_ container to toss the (still good) components I don't need so I don't have to interrupt my flow to return them to the precise location in my parts storage system. I call these my "go-backs" and sort them back into storage whenever I need to so something mindless. Consumables: Heat shrink tubing, replacements for the most common connectors/headers you use, spare batteries for the calipers, lever nuts (e.g., Wago 221 compact series), ferrules, IPA wipes, poster putty, even more spare batteries for the calipers, and breadboard friendly buttons, trimpots, connectors, and an infinite supply of jumper wires in every color. Did I mention spare batteries for the calipers?
56 points. Some things I would add to the list: - Good binocular scope with a reducer. Super helpful when working on smaller SMD parts. Freestanding so it can go over your preheater. - An alcohol dispenser (can get them in the beauty isle) for cleanup, and Kimtech wipes. like this - www.amazon.com/Liquid-Alcohol-Dispenser-Bottle-Labeled/dp/B000MI85FC - Lots of connectors, adapters, etc. - A USB battery pack. You can use it to quickly plug in a USB-powered project, it's portable, and it's guaranteed to be isolated, so can be great for checking if you suspect some sort of group look issue. - Breadboards, breadboard wires for quickly testing out chips - Breadboard SMD adapter boards. You can quickly solder on a chip you want and characterize it before you use it in a design.
That’s a really neat idea with the push dispenser. I’ll have to order one and fill it with some Lysol to disinfect my gloves after opening components received in the mail. Also I really appreciate the link because I wouldn’t have figured out what u meant by alcohol dispenser alone.
@@spencer961 Yeah it's one of my favorite things. As for tissues to go with it, you can use any, but I prefer kimtech tissues since they don't leave little bits of paper dust.
36 for my work "lab". I think the fire extinguisher is the real MVP of my score here, sometimes I still wonder how I get anything fixed! Subjective, but I think dedicated component testers like an LCR, ESR, and transistor tester are invaluble at times. Especially when you're working on different things every day with no schematics and have absolutely no clue what's going on (that's me). Bonus points for a tube tester if you occasionally work on old gear. I use an AVO CT160 at work.
You definitely forgot to mention the LCR meter for capacitance and inductance but that's pretty much built into lots of multimeters. I've got an old analog benchtop one
Really enjoyed this video. Stumbled into it while searching for gear to outfit a new hobbyist bench. Worked with HP in the 70's while in engineering school. Now, just want to have some fun with my grandkids & a good electronics bench/lab seems like something they'll enjoy. Thanks for keeping it enjoyable!
Great video Keysight! A killer video would be around the topic of electronics storage since everyone knows that if you advance in electronics you will eventually have a hard time storing and mostly organizing your (never too much) spare parts/components I think it would be a great video since there is not a lot of information on it online and this is certainly a topic which can be answered with a lot of experience which you guys seem to have a bit of ;) Looking forward to it!
You forgot to to mention an Isolation-Variable transformer. Very important if you need to measure on the mains connected side of things, like an SMPS, or an old hot-chassis-radio.
Just remember that a variac and isolation transformer are separate types of equipment. They can be plugged into each other, but the variac is just an adjustably tapped output off of a single winding.
@@heyallenify They should also be available as a combined unit, if not you can make one yourself, like I did. If you are interested you can see it on my YT channel.
Wow 49 points! Impressive, considering how guetto and space constrained is my 'lab'. Definitely considering getting a fire extinguisher since a while ago.
70 points! From 10-15 to 70 in a year. Looks really good in text, but if I supplied a picture you would see my carton box Fume extractor with two pc fans and a carbon filter, mounted on an old swing lamp arm. 3rd hand solder helping hand made of 10 and 12 mm copper tube, fittings, wing nuts and nylon washers. My three output, DYI PC power 3D printed Bench top Power supply. Got some old used, some broken, quality stuff from a school (the broken stuff just needed new fuses;-)), all other equipment is either 2nd hand or from the 80's something (multimeter, analog oscilloscope, solder station, glue gun). All my plumber gear is now in the shed, my computer lab is now officially my electronics test lab. :-) Thank you for going the extra mile to please your future customers...
Contact cleaners (very useful) IPA/Denatured alcohol 95% or higher Tooth brush, wipes, etc. Plastic polisher (meguiars?) Sandpapers (high grit #) IR thermometer (better yet thermal camera) H2O2 to whiten those old beige electronics What else to add?
I got 50 points! It’s surprising because my desk is about 1.7 meteres from corner to corner on the work bit. Also a calculator is a must have when you need to for example calculate the watt-hours of a battery or calculate the power output or input of a device, this can be done without a calculator but a calculator makes it faster and easier. It also helps when your feeling lazy.
75 points. What is definitely missing on the list is kapton tape. Very useful as electrical insulation when fixing issues especially when fixing issues with SMD components (I sometimes swap the pins on SMD transistors). What I think are also must haves are multiple test leads, banana plug leads, banana to BNC converts, different test clips and probes (I love those small pogo pin SMD probes from Fluke) and crocodile clip leads. And finally: an ESD safe coffee mug :-D
School Lab: 79/79 (+VNAs, SPAs, anechoic chamber etc) :P Home "Lab" as in random stuff I have in my room: 26 (+ maybe 2 bonus points for some ham radio stuff like a RTL-SDR as poor man's SPA, and a SWR meter) Hot take: I'd give negative points for using a wet sponge for soldering, that shit ruins your tips. Brass wool is so much superior.
Great! I think I may have scored 100% on this one! I do use a component tester, LCR meter a lot even though it is only a small cheap one for simple checks (did I read the resistor bands correctly!). I also find it is vital to have a small and very thin set of small spanners for all those components that need tightening, pots, banana plug sockets, etc. And of course a really good source of light and I use a hand lens from time to time too! Oh, I also have a circuit board holder - cheap and really useful and an IC pin straightener as they pins on new chips are always splayed out!
My low budget lab that I have been building for about a year is at about 49 points. I still need a lot of things, but on the bright side I finished my fume extractor just yesterday.
One thing to not forget is an LCR meter. You need a reliable way to measure Inductance and data logging curves on excel might not be time efficient. I use the Tenma 10465 which was around $150 USD. Multiple frequency ranges like 100 Hz to 100 kHz is important! Also ESR meters are nice for in-circuit testing. I still need to get one, but they are pretty cheap.
I have a 40-year old Radio Shack DMM and an even older 2001 Function Generator ... what I need is a O-Scope that will tell me what serial setup it's sensing (e.g. 9600 8N1) right on the screen. IF the signal is close, then the O-Scope should let me know it's slow, varying or fast.
@@hugoflores5806 I wish there would be more open source tools. Sometimes all you got is Win install. I remember me trying a few years ago. I don’t remember the specific piece of sw I tried to run. But I remember the wasted time 😂
And what about isolating transformer (with variac)? It is also important thing if we care about safety, am I right? Why it is missing from the checklist?
Total score 44p (because my amazon oscilloscope doesnt count). However, i have an electronics rated fireextinguisher (because flushing electric fire with conductive materials are a bad idea).
When you don't really trust yourself and just yolo your circuits, a fire extinguisher is your best friend. It saved me a handful of times haha On a side note, who needs a fume extractor when you have an open window and fan blowing on your work? Unless you use lead free solder that is. surprising how I got a 62 considering how ghetto most of my equipment are. That fire Extinguisher is essentially a must have.
I did not keep a real count, but right now I don't remember anything missing from my lab. Although, like somebody else also excused -- my fire extinguishers (2 of them) are in my garage, just next to the kitchen door. Even otherwise, my home is my electronics lab. The main components collection (a carousel) occupies most of the next room, along with some additional instruments and a library book shelf (component data books). My two analog storage scopes and 3 digital ones reside in the living room. There is also an 8-channel digital strip chart recorder, two pulse generators, a stroboscope, two audio analyzers and a Control Systems Analyzer. There are two PCs in the main lab room. The power supplies there consist of one 4-output, one 3-output, one 2-output all on the bench shelf and finally one power supply on my scope cart. The main math devices are a 12" slide rule, and a binary / hex calculator. Plus I always have my smart phone with me, with its HP-15 and HP-67 calculator applications. Did I get any bonus points? I forgot to mention my Universal 1 GHz counter / timer and a GPS lock-in calibrator. And two current probes, one 15 kV scope probe and one 700 V differential probe as well as one 900 MHz active probe. 2 LCR bridges. Oh, two modern spectrum analyzers are at home, while one vintage spectrum analyzer and some more instruments are most of the time in an outside storage facility, but visit occasionally my home lab. More bonus points???
I would really like to get a scope with up to 200Mhz (currently I don't need more). I have 2 dead Nintendo 64s and the clock signal of the machines are at 100Mhz. I'm not sure what to look for but I might be able to figure out what goes wrong with it, why aren't they booting by checking the legs of chips, looking for certain signals.
Logic probes, chip programmers, desoldering tools. dental tools. White rubber erasers. Chip tester. Joystick testers. Components testers. hemostats. Magnifiers, including lighted and swing arm ones. "helping hands" rigs. Breadboards. The list goes on.
Does the little mini fume extractor that's built into my soldering station count? It's just a little hose that comes to a tube right above the iron... which catches some stuff, but not everything. It probably shouldn't get me full credit, though I'm hoping I can get a point or two, at least.
@@DavidLindes The larger the smoke extraction area, the better, as well as the higher the smoke extraction rate, the better. Obviously, the system must have activated carbon filtration. The points are only for evaluation, health is the most important...
i had a hand-held battery operated harmonics generator you could use to do a quick audio circuit diagnosis that was really great. I lost it so I'm thinking of making one, unless someone can recommend one.
49. Any points for equipment built from a kit? Points for modifying it to work better? Any points for equipment over 50 years old still working & in use? Any points for self designed & built equipment? Stuff you missed, microscope, pcb holder thingy, lab notebook, some sort of breadboard.
34 points, the fire extinguisher was a big help to my total! Just getting our home bench started, so maybe not too bad. Need a Rolex to make an ESD strap, donations accepted :)
In addition to what was mentioned, a couple of reference standards and a loop calibrator come in handy, especially for sanity checking test gear, plus analogue scopes are great if you want to learn all the fundamentals of setting up a scope with direct non sub-menu interfaces, infrared non contact thermometers, thermal imager, k-type thermometer, can come in handy for diagnostics, wet and dry vacuum for mess, isopropyl alcohol, thinners, lighter fluids, deionised water and acetone for use in cleaning and solvents, shaker plate, hot plate, angle poised lamp, head torch, jewels loop or magnifier glasses, smartphone for reference and camera use, air compressor, different types of tape including capton, 3M magic tape, copper and aluminium, normal, electrical, duct, adhesives, storage boxes for holding projects while working on others, different microcontrollers, and breadboards, dupont jumper wires, grabbers, LCR meters, spectrum analyser and vna, isolation transformer, helping hands, bench vice, hand operated counter, frequency counter, timer, clock so time doesn't run away, always have someone present when working on something dangerous, it took me nearly 20 years to build my home lab, and there's alot more there than mentioned, but you'll get alot of enjoyment out of the hobby especially with stuff you build and repair yourself, not to mention all the knowledge you'll gain.
for caps and resistors I use smd books. way easier to work with. thanks for the tip on using bottles to store less standard sizes. bags take too much space.
Dear .. in my country, I do not bear the cost of purchasing these devices (the general income equals 10 US dollars per month). I hope to own even old equipment and measuring devices.
You know this equipment is only a dream sheet . Most of us buy only what we can afford. I myself only have very little on this list. The idea is to just enjoy what you have and add when you can.
I have a need for benchtop DMM like: EDU34450A Smart Bench Essentials Digital Multimeter!!! OK, I need more than one, but other people would like also to win! So one will do for now! Thank you Keysight! I'm sure all the people I'll demo this beauty will agree, that Kesight make darn good equipment!!!
Nice Electronics Workbench! I love Keysight! We used MXE EMI receiver on my workplace. I also built mine an Electronics Workbench with centralised PC control test equipments.
I like the humor in this video. Thanks to the scorecared, I scored 66 points. It reminds me I need a fire extinguisher in the lab, not outside of the room :-) The only other thing I miss is a power supply with 3 outputs. The modell from Keysight would perfectly fit on my lab bench.
Adding "benchtop" to the name of anything instantly increases its price by at least $150 (with the exception of benchtop power supplies. They're usually reasonable-ish). My reasons for not having a benchtop multimeter, a benchtop function generator, and a benchtop oscilloscope is more of a lack-of-funds problem than a lack-of-desire problem haha.
3 DMMs ? Do I need to sell the other 27 ? I have them up to 7.5 digits. I miss some things on your list like VNA, SA, RF generator, meg-ohm meter, Slotted-line, calibration gear, meter, opacity meter, spectrometer, component tester, curve tracer, LCR meter, microscope, PCB repair stuff, Frequency counter, programmer..
Should smartphone/pc internet access be on the list for looking stuff up? Also the smartphone is great for taking before photos of things before disassembly. If I borrow the extinguisher from the kitchen, and if I consider an old analog scope as a bench top scope I'm at 63 points, otherwise, I drop to 45. I'd love to win some of this newer gear. I'll be checking in daily for the rest of the contest! Thanks for the great giveaway!
Scored 66/79. Fire extinguisher gave me the highest points. Missing the points because of Grounded setup(-5), Function Generator(-5), Voltage Detection Tool(-1), Hot plate(-1), non bench-top oscilloscope(-2).
A magnifying device depending on how small your work is. A microscope for replacement of parts, a jewelers loupe to read the printing on a component or finding that inadvertent solder bridge. And a small but strong flashlight that puts light exactly where you want it and at the angle you need.
Before this score sheet, I always assumed, that my lab is in worst shape, considering gear.. But no.. Get 74 points!! Even I have 17/24 from other things without score.. 😂 Putt under extra stuff my data logger, insulation tester, component tester, frequency counter etc.. If I can get 1 point for every extra stuff, will get more points.. I have 4 DMM's, all handheld, 2 soldering station and hot air.. But power supply has 5 outputs.. Organizing bins for components was very expensive, but I get cheaper.. 😊 My first oscilloscope was analog, because in these times digital ones was rear, expensive and have a similar screen as analog ones.. And it helped me a lot in repairs and projects.. Best thing - if accident happens, I had schematic to repair it.. 🤣 But it never happened.. Old work horse was very tuff.. Still have it.. 👍
MY TOTAL SCORE IS 46/79 POINTS. Oscilloscope: Tektronix 2232 Analog/Digital from 1989, it's in top condition from ebay... Power supply: A rack mount Agilent 6663B 0-5A / 0-20V modified for benchtop use by adding front binding posts, but it's quite a MONSTER on my tiny bench; I'm happy with it though only payed $150. Handheld DMM: A Fluke 18b+ straight from China, It was inexpensive and it performs quite well for what it is, gotta give it to Fluke. I feel like I should get extra points for my awesome Amscope x4.5 magnification microscope. I don't got a function generator... I hope all you guys from Keysight consider me for a lab upgrade! Would appreciate it for the rest of my life. Thanks for "Keysight University Live From The Lab" It is AWESOME! EDIT: I have little experience using these tools, one day it clicked in my head that I wanted to do electronics, and that notion lead me to buy some equipment piece by piece, one at a time. I plan on going to school for electronics engineering in the near future!
One of my biggest life regrets is missing keysight University. It's easy to make a better smoke remover. 2 noctua fans, dryer hose and some twine. You guys cannot sell that in return for a fellow Nerd down on his luck in need of a logic analyzer (attached to an official keysight lab makeover). Haha. Your content is funny and knowledgeable sir.
What did I miss? You can sign in to download the lab scorecard + win free test gear here: bit.ly/KULive2
I just noticed you guys have "Engineering Essentials" category of oscilloscope. Matching with my channel name. 🤩
You missed the Einstein bobblehead, that's pretty much essential.
A logic analyser and a DC clamp meter.
The event site is down, unfortunately. Hope Yyou guys have noticed?
Yup, the site is down with 502 error :(
I don't have a calculator so I don't know my score
This comment is extremely underrated
Here's one option: books.industrialpress.com/9780831142315/machinerys-handbook-and-calc-pro-2-combo-large-print/ ;)
(Wait, do I get points for having a Machinery's Handbook? I doubt it, because it's not really for the electronics aspects of things... but... I've got one! And the calculator... though I just counted in my head, even though the calculator is right within reach.)
@@DavidLindes that's beautiful, but for that price I'll stay stuck to my abacus
@@sergiomissaglia6380 That was the best Genesis album, in my opinion.
@@DavidLindesI have fourteen different editions of Machinery's Handbook... Four of which I bought new, and I still find the price of them offensive.
You forgot the #1 most critical thing that absolutely must be in every lab: LAB NOTEBOOK.
Ooh I've got a good one, too.
I prefer something that looks like a calendar.... but is actually sliding whiteboard squares. Use it for keeping track of what I'm working on in my autistic mind. I tend to have 4-5 different things I need to work on at the same time and visualizing it makes it easier to prioritize. They slide in case I change my mind or want to reorganize my thoughts 😉
@@KeysightLabs you mean your imitation of psu jitter? Bahahaha
@Keysight Labs I've literally got so many and they're all filled with notes and I've lost a few that have info on some circuits I'm going to teach kids. Over 1000 pages last count.
my bench:
-cheap old multimeter
-bench power supply
-soldering and hot air station
-some random tools
-a pc
-a bunch of trash and work in progress
"An oscilloscope is like a camera for electricity." Great analogy.
38 points ill give myself 1 extra point for owning 3d printer.
You deserve 5 points for that.
@Jonathan Long
5 + 3 for you.
My work bench has a 59 by your score. Things you missed that I find useful: a light source/magnifier on a pose-able arm, fabric tape for touch screen repairs, masking tape for labels.
Score: -1
I have an empty room, a potato, and a half-eaten can of beef stew. 😔
why did you steal my potato? I was making a battery for my flashlight!
@@sammyk7024 My bad! 😬 I figured the window in your kitchen was unlocked because you weren't using the potato sitting on your kitchen counter. Can you help a brother out and let me keep half? I'll even give you the half without bite marks in it! 😎👍
Where did you get an empty room? I have stuff piled up everywhere, and stuff in storage. I can't even get to my "bench" area because of all the "I'll save that (insert non-working electronic device) and I can fix it later when I get a chance" things piled on it.
Correction: "They're really not expensive unless you want to get Keysight."
@Frankie Bleddyn This presentation is targeted at hobbyist audiences. Professionals already know or have most of the equipment they need. While Keysight's products are among the very best, they are extremely hard to justify for the non-professional. There are numerous other products offering a far better value such as Rigol, Uni-T and Sigilent. To get the equivalent functionality of a $300 Rigol from Keysight, you'd spend well over $2K or more.
I was hoping this marketing campaign repositioned their products to be more competitive to hobbyists. Since they failed to do so, I am suspicious of this being more of an act of desperation. They are several high-end equipment manufacturers and only so many high-end customers. The market is also becoming increasingly saturated and competitive with tons of products offering tremendous amount of value for the price. Perhaps, Keysight is conducting market research to gauge profitability in the hobbyist space. It would have been cheaper and far more effective if they priced one of their existing scopes to compete with Rigol and the other value brands, instead of trying to scam us with sweepstakes.
You think Keysight is expensive?
“If only you knew Bob, if only you knew.”
@Frankie Bleddyn No, (only when I’m tinkering with QRP HF antennas) but I do have an unhealthy addiction to analouge vintage Rohde & Schwarz gear, leaning slightly toward RF related test and calibration gear.
(I used to repair mostly high-end consumer gear at a Panasonic Center for a living.)
Always love a company that has a sense of humor. It tends to mean that the company has a human touch, meaning, QUALITY!
you forgot the jerry rig reflow oven hacked out of a toaster oven and an arduino
I prefer a sand-filled pan
light? seriously, you need good light.
1-10 points for light; self scored.
The need of good light is very underrated, I noticed last time I was trying to either read the component serial number or soldering something.
I come from the ElectroBoom channel ✌🏽
79 points! Sort of, and when I say sort of my fire extinguisher and protective glasses are in the kitchen where my 3D printers live right now, keeping my first aid kit company. Can my house be my lab? My house is my lab!
I find lots of good light reduces the need for magnification, though not always entirely.
I like having a (cheap) microscope that let's me snap pictures quickly.
For de-soldering, I find a "solder sucker" great for the initial blob and I save the wick for the last remnants.
A _small_ container to toss the (still good) components I don't need so I don't have to interrupt my flow to return them to the precise location in my parts storage system. I call these my "go-backs" and sort them back into storage whenever I need to so something mindless.
Consumables: Heat shrink tubing, replacements for the most common connectors/headers you use, spare batteries for the calipers, lever nuts (e.g., Wago 221 compact series), ferrules, IPA wipes, poster putty, even more spare batteries for the calipers, and breadboard friendly buttons, trimpots, connectors, and an infinite supply of jumper wires in every color. Did I mention spare batteries for the calipers?
56 points. Some things I would add to the list:
- Good binocular scope with a reducer. Super helpful when working on smaller SMD parts. Freestanding so it can go over your preheater.
- An alcohol dispenser (can get them in the beauty isle) for cleanup, and Kimtech wipes. like this - www.amazon.com/Liquid-Alcohol-Dispenser-Bottle-Labeled/dp/B000MI85FC
- Lots of connectors, adapters, etc.
- A USB battery pack. You can use it to quickly plug in a USB-powered project, it's portable, and it's guaranteed to be isolated, so can be great for checking if you suspect some sort of group look issue.
- Breadboards, breadboard wires for quickly testing out chips
- Breadboard SMD adapter boards. You can quickly solder on a chip you want and characterize it before you use it in a design.
That’s a really neat idea with the push dispenser. I’ll have to order one and fill it with some Lysol to disinfect my gloves after opening components received in the mail. Also I really appreciate the link because I wouldn’t have figured out what u meant by alcohol dispenser alone.
@@spencer961 Yeah it's one of my favorite things. As for tissues to go with it, you can use any, but I prefer kimtech tissues since they don't leave little bits of paper dust.
Thanks for that, do you have any more tips?
@@Cristi4n_Ariel those are the main ones. Anything in particular you're curious about?
36 for my work "lab". I think the fire extinguisher is the real MVP of my score here, sometimes I still wonder how I get anything fixed!
Subjective, but I think dedicated component testers like an LCR, ESR, and transistor tester are invaluble at times. Especially when you're working on different things every day with no schematics and have absolutely no clue what's going on (that's me).
Bonus points for a tube tester if you occasionally work on old gear. I use an AVO CT160 at work.
I got 36 for my setup. A good light is also a pretty important item to have. Also a place to store papers and also make notes.
You definitely forgot to mention the LCR meter for capacitance and inductance but that's pretty much built into lots of multimeters. I've got an old analog benchtop one
I just got my first LCR meter after doing this stuff for 20 years... Boy oh boy are they nice to have
Really enjoyed this video. Stumbled into it while searching for gear to outfit a new hobbyist bench. Worked with HP in the 70's while in engineering school. Now, just want to have some fun with my grandkids & a good electronics bench/lab seems like something they'll enjoy. Thanks for keeping it enjoyable!
Great video Keysight! A killer video would be around the topic of electronics storage since everyone knows that if you advance in electronics you will eventually have a hard time storing and mostly organizing your (never too much) spare parts/components
I think it would be a great video since there is not a lot of information on it online and this is certainly a topic which can be answered with a lot of experience which you guys seem to have a bit of ;)
Looking forward to it!
Great idea!
electronic load, usb amp/voltage monitor and microscope(digital). These have become VERY important to me when testing many things.
You forgot to to mention an Isolation-Variable transformer. Very important if you need to measure on the mains connected side of things, like an SMPS, or an old hot-chassis-radio.
Ooo good one!
Just remember that a variac and isolation transformer are separate types of equipment.
They can be plugged into each other, but the variac is just an adjustably tapped output off of a single winding.
@@heyallenify They should also be available as a combined unit, if not you can make one yourself, like I did. If you are interested you can see it on my YT channel.
5:14 Dose ATX PSU as lab PSU with 3.3 5 and 12 V counts ?
Wow 49 points! Impressive, considering how guetto and space constrained is my 'lab'.
Definitely considering getting a fire extinguisher since a while ago.
70 points! From 10-15 to 70 in a year. Looks really good in text, but if I supplied a picture you would see my carton box Fume extractor with two pc fans and a carbon filter, mounted on an old swing lamp arm. 3rd hand solder helping hand made of 10 and 12 mm copper tube, fittings, wing nuts and nylon washers. My three output, DYI PC power 3D printed Bench top Power supply. Got some old used, some broken, quality stuff from a school (the broken stuff just needed new fuses;-)), all other equipment is either 2nd hand or from the 80's something (multimeter, analog oscilloscope, solder station, glue gun). All my plumber gear is now in the shed, my computer lab is now officially my electronics test lab. :-) Thank you for going the extra mile to please your future customers...
Contact cleaners (very useful)
IPA/Denatured alcohol 95% or higher
Tooth brush, wipes, etc.
Plastic polisher (meguiars?)
Sandpapers (high grit #)
IR thermometer (better yet thermal camera)
H2O2 to whiten those old beige electronics
What else to add?
This is a great list!
53 points. Silmple elektronics tools (hand dmm x2, soldering iron), basic electronic components , hand tools (electic, manual), hobby machine park (mini lathe, milling machine, 3d printer) , automotive tools (AFR meter, car diagnoscops).
Nice this video is exactly what i need for setting up my own bench
and who else audibly gasped when the bench multi meter was going to hit the ground :-)
I got 50 points! It’s surprising because my desk is about 1.7 meteres from corner to corner on the work bit.
Also a calculator is a must have when you need to for example calculate the watt-hours of a battery or calculate the power output or input of a device, this can be done without a calculator but a calculator makes it faster and easier. It also helps when your feeling lazy.
I got 52 points (but I sure could use those extra 18 points you guys are giving away!!!)
Just entered my bench, good luck to everyone, Thanks Keysight!
75 points. What is definitely missing on the list is kapton tape. Very useful as electrical insulation when fixing issues especially when fixing issues with SMD components (I sometimes swap the pins on SMD transistors). What I think are also must haves are multiple test leads, banana plug leads, banana to BNC converts, different test clips and probes (I love those small pogo pin SMD probes from Fluke) and crocodile clip leads.
And finally: an ESD safe coffee mug :-D
That's a good one!
School Lab: 79/79 (+VNAs, SPAs, anechoic chamber etc) :P
Home "Lab" as in random stuff I have in my room: 26 (+ maybe 2 bonus points for some ham radio stuff like a RTL-SDR as poor man's SPA, and a SWR meter)
Hot take: I'd give negative points for using a wet sponge for soldering, that shit ruins your tips. Brass wool is so much superior.
Wet sponge would be just great if using a non regulated soldering iron
True. Plus, say goodbye to any heat that tip might have built up and stabilized on.
Great! I think I may have scored 100% on this one! I do use a component tester, LCR meter a lot even though it is only a small cheap one for simple checks (did I read the resistor bands correctly!). I also find it is vital to have a small and very thin set of small spanners for all those components that need tightening, pots, banana plug sockets, etc. And of course a really good source of light and I use a hand lens from time to time too! Oh, I also have a circuit board holder - cheap and really useful and an IC pin straightener as they pins on new chips are always splayed out!
Thanks @Keysight Labs for this event!!!
My low budget lab that I have been building for about a year is at about 49 points. I still need a lot of things, but on the bright side I finished my fume extractor just yesterday.
One thing to not forget is an LCR meter. You need a reliable way to measure Inductance and data logging curves on excel might not be time efficient. I use the Tenma 10465 which was around $150 USD. Multiple frequency ranges like 100 Hz to 100 kHz is important!
Also ESR meters are nice for in-circuit testing. I still need to get one, but they are pretty cheap.
Can you tell me the name of that cute power supply? (the small one with the green display)
I have a 40-year old Radio Shack DMM and an even older 2001 Function Generator ... what I need is a O-Scope that will tell me what serial setup it's sensing (e.g. 9600 8N1) right on the screen. IF the signal is close, then the O-Scope should let me know it's slow, varying or fast.
I'm a Mac person. Learned pretty quick, you can't do electronics even on (my) hobbyist level without Win computer 😀
you could try to compile linux tools
@@hugoflores5806 I wish there would be more open source tools. Sometimes all you got is Win install.
I remember me trying a few years ago. I don’t remember the specific piece of sw I tried to run. But I remember the wasted time 😂
Saftee - 24p
Dmm- 3p
Misc. - 14p
Self rating - 3p
______________
44p
My graduate thesis would be lot easier to test with an oscilloscope :)
And what about isolating transformer (with variac)? It is also important thing if we care about safety, am I right? Why it is missing from the checklist?
Is their fume safe flux?
I don't have a vice, but I use a wooden laundry clamps lol to hold the PCB
and my score 24 btw
Same difference..
Total score 44p (because my amazon oscilloscope doesnt count). However, i have an electronics rated fireextinguisher (because flushing electric fire with conductive materials are a bad idea).
When you don't really trust yourself and just yolo your circuits, a fire extinguisher is your best friend. It saved me a handful of times haha
On a side note, who needs a fume extractor when you have an open window and fan blowing on your work? Unless you use lead free solder that is.
surprising how I got a 62 considering how ghetto most of my equipment are. That fire Extinguisher is essentially a must have.
The freezer spray is an ESD nightmare. Don't use it unless you're prepared to nuke your chip.
Noted, makes sense
Good to know, I shot the unobtainable ADC in my scope with a freezer spray during fault finding...
I did not keep a real count, but right now I don't remember anything missing from my lab. Although, like somebody else also excused -- my fire extinguishers (2 of them) are in my garage, just next to the kitchen door. Even otherwise, my home is my electronics lab. The main components collection (a carousel) occupies most of the next room, along with some additional instruments and a library book shelf (component data books). My two analog storage scopes and 3 digital ones reside in the living room. There is also an 8-channel digital strip chart recorder, two pulse generators, a stroboscope, two audio analyzers and a Control Systems Analyzer. There are two PCs in the main lab room. The power supplies there consist of one 4-output, one 3-output, one 2-output all on the bench shelf and finally one power supply on my scope cart. The main math devices are a 12" slide rule, and a binary / hex calculator. Plus I always have my smart phone with me, with its HP-15 and HP-67 calculator applications. Did I get any bonus points? I forgot to mention my Universal 1 GHz counter / timer and a GPS lock-in calibrator. And two current probes, one 15 kV scope probe and one 700 V differential probe as well as one 900 MHz active probe. 2 LCR bridges. Oh, two modern spectrum analyzers are at home, while one vintage spectrum analyzer and some more instruments are most of the time in an outside storage facility, but visit occasionally my home lab. More bonus points???
the website crash... on the event MARCH 15.. can't get it error 505
I would really like to get a scope with up to 200Mhz (currently I don't need more). I have 2 dead Nintendo 64s and the clock signal of the machines are at 100Mhz. I'm not sure what to look for but I might be able to figure out what goes wrong with it, why aren't they booting by checking the legs of chips, looking for certain signals.
And I thought I was smart using those "integral wash bottles" for wetting the sponge...guess I wasn't the only one who had that idea.
61 pts. But you really need an electronic load. And near field probes.
Logic probes, chip programmers, desoldering tools. dental tools. White rubber erasers. Chip tester. Joystick testers. Components testers. hemostats. Magnifiers, including lighted and swing arm ones. "helping hands" rigs. Breadboards. The list goes on.
Hey, I'm using a fume extractor! I have 60 points.
Does the little mini fume extractor that's built into my soldering station count? It's just a little hose that comes to a tube right above the iron... which catches some stuff, but not everything. It probably shouldn't get me full credit, though I'm hoping I can get a point or two, at least.
@@DavidLindes The larger the smoke extraction area, the better, as well as the higher the smoke extraction rate, the better. Obviously, the system must have activated carbon filtration. The points are only for evaluation, health is the most important...
Very timely! I plan on learning about electronics and how to build my own circuits, so I highly appreciate this, win or not!
i had a hand-held battery operated harmonics generator you could use to do a quick audio circuit diagnosis that was really great. I lost it so I'm thinking of making one, unless someone can recommend one.
@Keysight Labs Sorry but the link in the description doesn't link to the scorecard
Fixing it up, sorry! So many people joining the server went down.
@@KeysightLabs Thank you :) Getting DDoS from too many fans is like a badge of Honor
i was waiting for such a video .. tks a lot 🌷👍
Glad you guys are back
49.
Any points for equipment built from a kit? Points for modifying it to work better?
Any points for equipment over 50 years old still working & in use?
Any points for self designed & built equipment?
Stuff you missed, microscope, pcb holder thingy, lab notebook, some sort of breadboard.
Listen to this man, can't fault this, and he's entertaining without hideous annoyance
Great video, thank you!!
Does having a dead 3325B count as having a function gen?
34 points, the fire extinguisher was a big help to my total! Just getting our home bench started, so maybe not too bad. Need a Rolex to make an ESD strap, donations accepted :)
So I also have a oscilloscope isolator, tip tinning, though sadly my desktop dmm is from then 80s.... but I do have two analog oscilloscopes!!!
In addition to what was mentioned, a couple of reference standards and a loop calibrator come in handy, especially for sanity checking test gear, plus analogue scopes are great if you want to learn all the fundamentals of setting up a scope with direct non sub-menu interfaces, infrared non contact thermometers, thermal imager, k-type thermometer, can come in handy for diagnostics, wet and dry vacuum for mess, isopropyl alcohol, thinners, lighter fluids, deionised water and acetone for use in cleaning and solvents, shaker plate, hot plate, angle poised lamp, head torch, jewels loop or magnifier glasses, smartphone for reference and camera use, air compressor, different types of tape including capton, 3M magic tape, copper and aluminium, normal, electrical, duct, adhesives, storage boxes for holding projects while working on others, different microcontrollers, and breadboards, dupont jumper wires, grabbers, LCR meters, spectrum analyser and vna, isolation transformer, helping hands, bench vice, hand operated counter, frequency counter, timer, clock so time doesn't run away, always have someone present when working on something dangerous, it took me nearly 20 years to build my home lab, and there's alot more there than mentioned, but you'll get alot of enjoyment out of the hobby especially with stuff you build and repair yourself, not to mention all the knowledge you'll gain.
Make a video of you lab. Sounds like you have a lot of experience.
for caps and resistors I use smd books. way easier to work with. thanks for the tip on using bottles to store less standard sizes. bags take too much space.
38 looks like I'm doing ok. Even if I had to make my own bench supply. Lol
so A.D.D. I love it...makes me feel like like there's hope for those of us so easily distracted..lol
Dear .. in my country, I do not bear the cost of purchasing these devices (the general income equals 10 US dollars per month). I hope to own even old equipment and measuring devices.
You know this equipment is only a dream sheet . Most of us buy only what we can afford. I myself only have very little on this list. The idea is to just enjoy what you have and add when you can.
I have a need for benchtop DMM like: EDU34450A Smart Bench Essentials Digital Multimeter!!! OK, I need more than one, but other people would like also to win! So one will do for now! Thank you Keysight! I'm sure all the people I'll demo this beauty will agree, that Kesight make darn good equipment!!!
Nice Electronics Workbench! I love Keysight! We used MXE EMI receiver on my workplace. I also built mine an Electronics Workbench with centralised PC control test equipments.
More safety items: Metal bucket with sand
I like the humor in this video. Thanks to the scorecared, I scored 66 points. It reminds me I need a fire extinguisher in the lab, not outside of the room :-)
The only other thing I miss is a power supply with 3 outputs. The modell from Keysight would perfectly fit on my lab bench.
i got 19 points
and analog oscilloscopes are cool.
Adding "benchtop" to the name of anything instantly increases its price by at least $150 (with the exception of benchtop power supplies. They're usually reasonable-ish). My reasons for not having a benchtop multimeter, a benchtop function generator, and a benchtop oscilloscope is more of a lack-of-funds problem than a lack-of-desire problem haha.
I've got a benchtop dollar bill for sale for the low cost of $151
@@KeysightLabs Hahaha touche' good sir, touche'
Thanks for the series!
60 for me. Mine is mostly set up for RF, so a spectrum analyzer, return loss bridge, service monitor, etc. are a must.
I did leave out the RF stuff, I'm toying with the idea of a pt.2 that's RF focused.
I just wish I could afford some Keysight equipment! 😀
clamp is also a nice tool. but i use multi arm soldering hand which is cheap .it is multi purpose item.
I'm trying to build an electronics lab in my big rig any ideas
Nice video education video for practitioners and technicians. Luv it ❤️
Is there a way to just get a price on an item with out giving up so much information?
Ive watched about 20 vids avout setups of labs and I've not seen people talk about havong ultrasonic cleaners. They are an awesome tool to have!
Good one!
@@KeysightLabs for me its "the precious" of my work space xD
3 DMMs ? Do I need to sell the other 27 ? I have them up to 7.5 digits. I miss some things on your list like VNA, SA, RF generator, meg-ohm meter, Slotted-line, calibration gear, meter, opacity meter, spectrometer, component tester, curve tracer, LCR meter, microscope, PCB repair stuff, Frequency counter, programmer..
DMM Democracies have no population limits.
Thanks Daniel
Should smartphone/pc internet access be on the list for looking stuff up? Also the smartphone is great for taking before photos of things before disassembly. If I borrow the extinguisher from the kitchen, and if I consider an old analog scope as a bench top scope I'm at 63 points, otherwise, I drop to 45. I'd love to win some of this newer gear. I'll be checking in daily for the rest of the contest! Thanks for the great giveaway!
I have a score of 44
42
My lab is the awser to the universe i guess.
An analog scope to start is BEST because it teaches you what is HIDDEN by the digital version.
Scored 66/79. Fire extinguisher gave me the highest points. Missing the points because of Grounded setup(-5), Function Generator(-5), Voltage Detection Tool(-1), Hot plate(-1), non bench-top oscilloscope(-2).
A magnifying device depending on how small your work is. A microscope for replacement of parts, a jewelers loupe to read the printing on a component or finding that inadvertent solder bridge. And a small but strong flashlight that puts light exactly where you want it and at the angle you need.
Binocular microscope with relatively low magnification and a ring light works a charm
66 for my lab, moved from 40-ish to 66 in few months, still have to work on it. Nice video btw
Nice! And thanks!
Before this score sheet, I always assumed, that my lab is in worst shape, considering gear.. But no.. Get 74 points!! Even I have 17/24 from other things without score.. 😂
Putt under extra stuff my data logger, insulation tester, component tester, frequency counter etc.. If I can get 1 point for every extra stuff, will get more points.. I have 4 DMM's, all handheld, 2 soldering station and hot air.. But power supply has 5 outputs.. Organizing bins for components was very expensive, but I get cheaper.. 😊
My first oscilloscope was analog, because in these times digital ones was rear, expensive and have a similar screen as analog ones.. And it helped me a lot in repairs and projects.. Best thing - if accident happens, I had schematic to repair it.. 🤣 But it never happened.. Old work horse was very tuff.. Still have it.. 👍
This was actually good; he was right about one thing though. Nobody else on RUclips mentioned anything about a fire extinguisher or first aid kit.
Definitely a must-have for me!
@@KeysightLabs Definitely, LOL!
The neon sign looks cool, but where is your Nixie tube from Dalibor Farný?
A very cool video that includes all the important tools and assistance for electrical engineers and inventors ⚡
And the idea of giveaway
It's Very nice idea.
MY TOTAL SCORE IS 46/79 POINTS. Oscilloscope: Tektronix 2232 Analog/Digital from 1989, it's in top condition from ebay... Power supply: A rack mount Agilent 6663B 0-5A / 0-20V modified for benchtop use by adding front binding posts, but it's quite a MONSTER on my tiny bench; I'm happy with it though only payed $150. Handheld DMM: A Fluke 18b+ straight from China, It was inexpensive and it performs quite well for what it is, gotta give it to Fluke. I feel like I should get extra points for my awesome Amscope x4.5 magnification microscope. I don't got a function generator... I hope all you guys from Keysight consider me for a lab upgrade! Would appreciate it for the rest of my life. Thanks for "Keysight University Live From The Lab" It is AWESOME!
EDIT: I have little experience using these tools, one day it clicked in my head that I wanted to do electronics, and that notion lead me to buy some equipment piece by piece, one at a time. I plan on going to school for electronics engineering in the near future!
One of my biggest life regrets is missing keysight University. It's easy to make a better smoke remover. 2 noctua fans, dryer hose and some twine. You guys cannot sell that in return for a fellow Nerd down on his luck in need of a logic analyzer (attached to an official keysight lab makeover). Haha. Your content is funny and knowledgeable sir.