[@akshaysinghchauhan97]

Thanks a lot for uploading such a knowledgeable content it helps a lot to understand minute concepts and perform the experiment perfectly keep up the good work thank you sir!

[@sunilkumarpadi9813]

Thank you sood jee for given lot of concepts for grow up our qa/qc engineers

[@devarajanaik705]

For water absorption test - the immersed sand should be in saturated and surface dry condition.But here the saturated sand is directly fed to oven instead it has to be air dried and conducted cone test to check the surface dry condition of fine aggregate

[@al1saqib]

Ssd weight is already measured at the start of test. It is 500gm.

[@farahmikhail8049]

At the beginning of the test, you stated that the sample in the state of SSD condition, but in the video, sample did not appear in this state....., you must check it first using the cone of humidity to insure the sample in this state.........

[@bhaskarsurya6583]

Without soaking of sand ,how can we take SSD weight sir

[@jesusglopez8430]

Thanks for sharing.

[@Memers248]

How can you determine the water absorption of fine aggragates without submerging the fine aggragates in water for 24 hours???

[@neelpatel1333]

How much time it takes to filter out all the sand @10:48. and what type of filter paper is used? Plz rly

[@neelpatel1333]

@@noname-bm9kb how much time it takes to filter out all the sand??

[@neelpatel1333]

@@noname-bm9kb i have labsman L-101. Is it ok??

[@pramodchawada8567]

Very nice video... thanks sir

[@umairuddinshaikh8579]

D=wt of oven dried sample+self wt of container???

[@destawkifile1456]

thank u very much, but how can i know specific gravity of mineral filler to prepare hot mix asphalt

[@ubaidpathan5083]

Sir you don't take ssd wt.
Instead ssd wieght you had take wt of sample

[@stanleyenaibe4377]

Awesome
Thank You

[@gladyskipchumba7500]

Thanks I learn more in this process

[@bino4102]

Sir, could you please explain how the denominator in the formula is becoming the weight of equal volume of water.

[@rajkumardhara568]

In Water absorption test, which technical basis you will tack this sample in SSD condition before soaking (24hours)??? waiting for your reply sir. Thank u

[@salmankhan-cp6wb]

to exposed into current warm air using hair dryer.for reference see BS 812 Part 2 clause 5.5

[@dirkliam8708]

In bs 812 the sample wash first right?

[@jayavardhans316]

Hiii sir how to prepare 1. 2 and 1. 3 specific gravity of nitric acid please rpl me please

[@sivaraman.s.m5548]

This video uploaded on 2013 you ask questions in 2019 how reply come

[@ashokkumareslavath7822]

Superb explanation I like so much

[@chandrashekarreddy8479]

thanks a lot for your service....

[@babarkhan3242]

thanks teacher ...

[@dirkliam8708]

In BS the sample should wash first?

[@SURESHSNAIR-jk1fe]

Not mandatory, if the sample has fines adhered into it then should be washed

[@civillearner8577]

@@SURESHSNAIR-jk1fe 👍

[@junaidraza9187]

its great but doesnt help about preparing the specimen as mentioned in the code which seems difficult.

[@dejeneayele2878]

am appreciate this video.

[@ImranAhmad-mk9dt]

How to download.

[@devdipkumar7301]

Very good sir 🙏🙏

[@soumyadeepghose3419]

Very Useful 👌👌

[@bangash777khan2]

helped me alot....thank u so much

[@kunalmahajan532]

Thanks

[@anupamanag7300]

Thank you sir

[@govtjops2197]

Free h20 content coal tar?

[@studyinnorwayandeurope2837]

Thank you

[@civilexplorer7038]

Background music destracts

[@rrmtlabcw382]

Dear performance sheet ki clear pic to dikha den

[@kalpanapatil2376]

good one

[@yakmonylang1500]

helped me to lean more

[@eliasomer196]

Last Chech After Immerse Compkete 24 Hours ..You Can Contino After It

[@sudhirkant291]

Pls sir show the observation sheet clearly

[@fernandosajib5891]

thank you so much :*

[@abdikaniabshir4979]

thank you so much

[@BB-pe3rn]

Tq u so much sir

[@ashenafargata2536]

thank u!

[@debabrataparia9127]

ಶ್ರೀರಾಮ್

[@jwalapaudel6729]

useful

[@Leklasical]

If the sample is C is 500 and B is 1500g how come A is 1800g.. Its an hidden error

[@dingdongnote8761]

Bcoz some volume of water of B is displaced by A and its not necesarily A+B=C

[@adamabellakamara2414]

thanks

[@eliasomer196]

Some Problem in This Test is :
Must Immerse The Sample In Water AtLeast 24 Hours To Let Sample to Absorbeed Water

[@AmitKumar-wv6vs]

Agree with you...

[@Rakeshkumar-tm7uh]

Sir Kindly Make video in hindi

[@govtjops2197]

Producure PDF link sent

[@kakafriendsvolleyballclub9449]

C value

[@mostafasaid5550]

ياه لو الواحد يروح يشتغل مع الناس دي

[@brighetnadjib9611]

راك غير تخلط يا الهندي خويا

[@DILIPKUMAR-xn2dn]

I am dj

[@shubhansusharma2110]

Band kro yar tumm padhana कुछ समझ नहीं ara

[@lalithakoruproplu4094]

Thank you sir

[@jpraj7527]

Thank you

[@ashwanipathak338]

Thank you sir