You need to check your STVA system(or delete it) on that bike it's not climbing rpm's like it should... sounds like its suffocating when he was on the throttle
Just finished my r6 build today and i got all the same feelings bruh. 02 and been down for a few years. Goodluck Maxy and give her the love she deserves!
If a cylinder was cutting out, its very noticeable! Cam chain tensioner and valve lash should definitely be checked before riding it further. But man, super impressed and happy to see another Gixxer revived!🤙🏻
It likely isnt taking in enough air JB. Being a naturally aspirated motor, taking in too much air wont be an issue . The mass airflow sensor may need to be cleaned or replaced . It sounds like its bogging down which means not enough air. Hopefully if all cylinders are firing, it's not a compression issue . Then your shit out of luck.
sounds like the same type of sounds and behaviour that i had on my 2004 gixer. I had to replace the fuel injectors and fuel pompe, the fuel pompe absorbed a lot of rust through the years, tanks were not made from aluminium. Check on those 2 first. and check if all cylinders are firing up.
Wonder if he got the right injectors? They make injectors the same size but different fuel flow characteristics. Idk if that bike will be worth $2500...
I’m very happy you got to ride it!! Kinda sounds a tad off but it gets up and goes!! That’s good!! No doubt in my mind you n JB would make it happen that’s the take away!! 😊😊 It’s been a struggle,but the end result will be worth it!! Reveal don’t let that take away from what you’ve accomplished!! I’m proud you did it and everything will be ok!!💜💜😊😊🏍🏍💨💨 Much love Natalie
hey max - nice to see 002 on the street, some fine tuning needed, which can be done, just a suggestion for the tank, take to body shop needs a pro to sand, red putty to get rid of all scratches n edges from tape, and prime, you then put on new finish coats - cant cost much for a shop to get ready & up to prime, my opinion tank was to bad shape for you to get ready under your work conditions - 002 will be a good one - stay safe man
LETS GO!!!! I LOVE watching your series man! Makes me wanna do my own build series but im not half as bike smart as you! LY man "Whattttsss gooddddd JBBBBB"
Sounds like a air leak probably around the intake exhaust or where u valves are but check ur radiator overflow cap. It sounds good but once the whole is fount you will hear and feel the diffence... hope that help shoutout from pa
Carbon fiber top yoke pad or paint the top part again itll freshen that up since everything else is painted and new looking but good job maxy alot of haters doubted u could resto that beast!
The injectors NEED to be snyced if they havent been. Vacuum lines on the TB? Also air intake will be different due to the headlight fairing not being on and having the stock air ducts. Just my guess, but if you havent synced the injectors thats it.
Love watching your videos man. I’m in Tucson to. I love riding unfortunately I was forced to sell my bike a while back and sadly haven’t been able to get another one since. Times have been hard with money lately. And bills are killing me. Watching your videos reminds me of why I love riding and keeps me working hard to get another bike. Keep it up man.
Make sure injectors are clean i had a gsxr 750 and injecotrs were really dirty. Best way to know is to take out the screens on the injectors and put them in and see if it runs better.
You were using the c-clip pliers wrong i think. Its suppose to pull apart when you squeeze together, theres a couple dowel locations on the tool. One that pulls apart, one that pulls together. Its hard to tell if you had it on wrong so if you were doing it right, carry on. If you were doing it wrong, now you know!
Float needle in the carburetor could be stuck see if there's fuel in the bowl of the carburetor. If you have fuel in the bowl of the carburetor then gravity feed the carburetor with fuel and see if it starts. If it starts then you have a fuel pump problem.
Yo Maxy, it's aliiiiiiiiiiiivvveee!!! Started right up and it seems the Gixxer performs well. A little tweaking here and there and she's ready to rock and roll BayyyBeeeeeeee!!! Awesome built Maxy and lots of hard work and dedication involved. Kudos to you and JB! It's been sometime now and you can see the end of the tunnel BayyyBeeeeee!!! Great content as always. Stay safe and healthy brother! PEACE...
BAAYYYYYBEEEEE, what up man. Love the fact that when I come home I can always look forward to one of your vids man. Didn't even know hold existed til a bit ago. Stay safe man and keep it up.
Saw that You ordered Motul Dot 5.1. Don't suggest to use it, had an issue on motorcycle. After some time brake hoses (from reservoirs) were wet, after wiping, next day, wet again! But,of course ,You can try... Have no idea why, switched to Dot 4 now, will see!
Make sure you are running in all 4 cylinders first. Check exhaust pipe temps with a temp gun you should see like 400 Fahrenheit across each one of you see a huge difference Theres your issue. Look for a cold pipe like under 200 when bike is fully warmed up. Yes your secondary throttle valves are computer controlled throttle butterflies and the primary throttle butterflies are the closest to the engine connected to your “wrist”. The secondary are the way the computer controls airflow into the engine to smooth out your throttle response and are servo motor controlled. Make sure they are opening 100 when giving full throttle. I suspect a clogged injector honestly. There are 8. 4 primary for all throttle positions and low demand.and 4 secondary for high rpm and high demand. Primary injectors are closest to the intake valve and secondary injectors are the ones furthest from the intake valve for better atomization. 2 injectors per cylinder. Also make sure the air inlets on the throttle bodies have their hoses hooked up or your sucking unmetered air into the throttle body which leans out the mix.
You might wanna check for manual chain tensioner , common problem on old gsxr people tightening them too tight stretch chain screws up timing and valves .
Top speed seems a bit restricted you think maybe that Yoshi tuner box thingy that you deleted might have something to do with it. Like with the cobb accessports with cars it was never divorced b4 you deleted it so now ur stuckk on low tune.
When I was a kid, my friend had lost his gas cap on his dirt bike. We swapped and I rode his bike and he rode my 3 wheeler and i forgot about the gas cap and popped a wheelie. That was a long ride home after with my junk on fire from gas soaking me. Good times.
I owe gsxr 1000 and that bike is down on power big time !when I crack throttle it break tire loose immediately or strands straight up !! And that the sounds is off some thing definitely wrong it
But this came out like this right? Shouldn't this go up against that? What? Yeah...... Are you sure? But this was like that right? Really? Are you sure? Oh yeah you're right.... 😂😂😂😂 Gotta love Maxy.
What’s good
BAYYYYBEEEEEE
Love the videos. Much love
You don't ride the other that your girl payed for do you even want it
That bike
Maxy... i could see your face just a thing maybe should edit if you can right now and look really close into it...
Jb is always there when you need him, shout out to him.
Kudos to JB! Always patient and smiling. Stay safe and healthy JB! PEACE...
and we want him to still be there in the future, so wear a goddamn helmet @jb !
Wait you talking about jb weld or a person named jb¿??? Am confused 🤣
You need to check your STVA system(or delete it) on that bike it's not climbing rpm's like it should... sounds like its suffocating when he was on the throttle
That's what I was gonna say. Not climbing like it should. Sounds congested.
It doesn’t sound like it’s getting the full power out but it’s 🔥🔥🔥
Just finished my r6 build today and i got all the same feelings bruh. 02 and been down for a few years. Goodluck Maxy and give her the love she deserves!
Frida: *exists*
Maxxy: "you wanna go inside??"
Something is not sounding how it should, it's like a metal grinding when you accelerate.
how about the horrible shake on rpm decel
The whining noise?
@@JohnnyLee8355 The whining noise is regular transmision noise
Yeah. Something isnt right.
I can tell you that.
rod bearings
25:17 you see his face looks younger than I expected ngl.
I was about to comment face leaked lmao
Jad44 in the first version you saw his whole face
Love You Maxy You inspired me to become a biker but without a motorcycle but i want one thank you and keep up the amazing work and videos bro!!!!!!
You guys never bled the brakes ...
Now that's SKETCHY.
You got that right
If a cylinder was cutting out, its very noticeable! Cam chain tensioner and valve lash should definitely be checked before riding it further. But man, super impressed and happy to see another Gixxer revived!🤙🏻
It likely isnt taking in enough air JB. Being a naturally aspirated motor, taking in too much air wont be an issue . The mass airflow sensor may need to be cleaned or replaced . It sounds like its bogging down which means not enough air. Hopefully if all cylinders are firing, it's not a compression issue . Then your shit out of luck.
sounds like the same type of sounds and behaviour that i had on my 2004 gixer.
I had to replace the fuel injectors and fuel pompe, the fuel pompe absorbed a lot of rust through the years, tanks were not made from aluminium.
Check on those 2 first. and check if all cylinders are firing up.
Wonder if he got the right injectors? They make injectors the same size but different fuel flow characteristics. Idk if that bike will be worth $2500...
25:18 max hmm we can see you face!!!
Maxy ur face is still in the video... just letting you know
Still a fire vid tho
wtf where lol
@@MADMAXY 25:17 if u pause right
Lmaoooo
@@MADMAXY 25:15
@@MADMAXY and at 5:29
I’m very happy you got to ride it!! Kinda sounds a tad off but it gets up and goes!! That’s good!! No doubt in my mind you n JB would make it happen that’s the take away!! 😊😊 It’s been a struggle,but the end result will be worth it!! Reveal don’t let that take away from what you’ve accomplished!! I’m proud you did it and everything will be ok!!💜💜😊😊🏍🏍💨💨 Much love Natalie
I'm here in upstate NY and just got my MAXWRIST stickers in the mail from AZ ! Yeah BAYYYYBEEEEEE
Watching you rip around on the GSXR after all that hard work is awesome. Congratulations man. You earned it.
hey max - nice to see 002 on the street, some fine tuning needed, which can be done, just a suggestion for the tank, take to body shop needs a pro to sand, red putty to get rid of all scratches n edges from tape, and prime, you then put on new finish coats - cant cost much for a shop to get ready & up to prime, my opinion tank was to bad shape for you to get ready under your work conditions - 002 will be a good one - stay safe man
Definitely cool seeing it on the road again cause that thing looked like it need to go to a scrap yard when you bought it 🤣.
I’m pissed too for the tank man first it looked crazy dope now it’s decent. 😣
Yeah it’s going to be redone
It’s a pain in the... you have to sand it all down
Next project suzuki hayabusa❤️
FZ32 GAMER that would be so dope
LETS GO!!!! I LOVE watching your series man! Makes me wanna do my own build series but im not half as bike smart as you! LY man "Whattttsss gooddddd JBBBBB"
Sounds like a air leak probably around the intake exhaust or where u valves are but check ur radiator overflow cap. It sounds good but once the whole is fount you will hear and feel the diffence... hope that help shoutout from pa
compression test an valve clearance check ASAP
Never tought to see this day come. Congrats👏👏👏
Carbon fiber top yoke pad or paint the top part again itll freshen that up since everything else is painted and new looking but good job maxy alot of haters doubted u could resto that beast!
The injectors NEED to be snyced if they havent been. Vacuum lines on the TB? Also air intake will be different due to the headlight fairing not being on and having the stock air ducts. Just my guess, but if you havent synced the injectors thats it.
Love watching your videos man. I’m in Tucson to. I love riding unfortunately I was forced to sell my bike a while back and sadly haven’t been able to get another one since. Times have been hard with money lately. And bills are killing me. Watching your videos reminds me of why I love riding and keeps me working hard to get another bike. Keep it up man.
Make sure injectors are clean i had a gsxr 750 and injecotrs were really dirty. Best way to know is to take out the screens on the injectors and put them in and see if it runs better.
FINALLY I HAVE BEEN WAITING SOOO LONG FOR THIS VID
You were using the c-clip pliers wrong i think. Its suppose to pull apart when you squeeze together, theres a couple dowel locations on the tool. One that pulls apart, one that pulls together. Its hard to tell if you had it on wrong so if you were doing it right, carry on. If you were doing it wrong, now you know!
Congratss dudee
CONGRATS BROOOOOOOOOOOOOOO
Float needle in the carburetor could be stuck see if there's fuel in the bowl of the carburetor. If you have fuel in the bowl of the carburetor then gravity feed the carburetor with fuel and see if it starts. If it starts then you have a fuel pump problem.
Congrats on the bike man more work needs to be done but this is a step further then it was keep up the good vids!!
Yo Maxy, it's aliiiiiiiiiiiivvveee!!! Started right up and it seems the Gixxer performs well. A little tweaking here and there and she's ready to rock and roll BayyyBeeeeeeee!!! Awesome built Maxy and lots of hard work and dedication involved. Kudos to you and JB! It's been sometime now and you can see the end of the tunnel BayyyBeeeeee!!! Great content as always. Stay safe and healthy brother! PEACE...
BAAYYYYYBEEEEE, what up man. Love the fact that when I come home I can always look forward to one of your vids man. Didn't even know hold existed til a bit ago. Stay safe man and keep it up.
I have same year and the power is not even half bro. Something's definitely not right. You'll get it tho I have faith in you baaaaabeeee
Oh shyyyytttt let's goooo bayybee
Saw that You ordered Motul Dot 5.1. Don't suggest to use it, had an issue on motorcycle.
After some time brake hoses (from reservoirs) were wet, after wiping, next day, wet again!
But,of course ,You can try...
Have no idea why, switched to Dot 4 now, will see!
Maxy my man you let the face slip out but lovin the videos bro keep it up💯👊🏼
After the bike is complete can you do a video going over the cost to fully repair the bike? Badass series tho
Of course bro
Make sure you are running in all 4 cylinders first. Check exhaust pipe temps with a temp gun you should see like 400 Fahrenheit across each one of you see a huge difference Theres your issue. Look for a cold pipe like under 200 when bike is fully warmed up. Yes your secondary throttle valves are computer controlled throttle butterflies and the primary throttle butterflies are the closest to the engine connected to your “wrist”. The secondary are the way the computer controls airflow into the engine to smooth out your throttle response and are servo motor controlled. Make sure they are opening 100 when giving full throttle. I suspect a clogged injector honestly. There are 8. 4 primary for all throttle positions and low demand.and 4 secondary for high rpm and high demand. Primary injectors are closest to the intake valve and secondary injectors are the ones furthest from the intake valve for better atomization. 2 injectors per cylinder. Also make sure the air inlets on the throttle bodies have their hoses hooked up or your sucking unmetered air into the throttle body which leans out the mix.
So awesome to see it running.
lets goooo baybeeeeeeee
i can watch this shit 24/7
Eagerly waiting to see you Max Pass others in your MAXY BUILD #002. Great job once again ❤🔥
You might wanna check for manual chain tensioner , common problem on old gsxr people tightening them too tight stretch chain screws up timing and valves .
12:45 brake all the way in and not really slowing down 😅
Mr. Swooprah if u mean 22:45 he’s not braking
I just became a member yesterday. Sooo whaaats goood baaaayyybeeeee
A member?
@@MADMAXY he subbed on ur livestream
@@MADMAXY I became a Maxwrist member. I watch you more though.🤙
Unplug ECU for 10 min. And do a reset. Might do somsing.lol
9:55 I know what you’re smokin lol
I found this soo funny
I also think the plastic bag where the fuel cap should be won’t be helping the vacuum it as fuel caps allow some air through
Its alive! Good stuff.
I saw this first! When he uploaded it last night 😅
I waited for that ride so much dudee, love ur project bike series.
You should chek if your valves are ajusted properly cause it not running right should be climbing a lot more in rpms
Needs new NGK Spark plugs boiii
Looks good! You going to put a fairing on the front?
Probably needs to have the injectors synced is my guess.
JB's hands on that bike look straight up like road rash hands. LOL @25:45
Is the same video as yesterday but you arezed your face well done I love you
Love your videos man and Ik you mucked up a little on the last video but it’s all good bro keep strong keep grinding and u look great man ❤️
Yesssssssss I've been waiting
Should try hydro dip some parts get some awesome patters bro easy to do yourself too 🤟
That bike is on fire dude
11:35 they are walking the same
Awesome gsxr is done maxy
I’ve already started on a 250 ninja and a Yamaha 1100
Looks good Baaayyyyyyybeeeeeeeeeee
Finally know what max Wrist face looks like
Very cool....... Maxy and J.B.😎👍
Waz gooodd beeeyybbeeehhhh!!! Its already 1am here guess i wont be sleeping then 😂
Western Aus?
Yo im so hyped!
HAPPY 420 MAXY BABBBYYYY
Been waiting maxy
Finally done it 😘😘😘
try and do a sweeping motion with the spraypaint instead of just side to side
I don't know, it sounded like it's on 3 cyl, not smooth when doing pulls.
Bryan Lei Porsado agreed.
Whaaaaats good babyyyy!!!!!!!!!
oh yeah nice
Sounds great!!
Keep the bike it's going to be the max pass king
What's good baybeeee!!🤯 maxy next build should be a dirt bike like yz 125 or kx 125!!!! 🤙
You do have more than 1/4 tank fuel the rv right?
Top speed seems a bit restricted you think maybe that Yoshi tuner box thingy that you deleted might have something to do with it. Like with the cobb accessports with cars it was never divorced b4 you deleted it so now ur stuckk on low tune.
When I was a kid, my friend had lost his gas cap on his dirt bike. We swapped and I rode his bike and he rode my 3 wheeler and i forgot about the gas cap and popped a wheelie. That was a long ride home after with my junk on fire from gas soaking me. Good times.
I owe gsxr 1000 and that bike is down on power big time !when I crack throttle it break tire loose immediately or strands straight up !! And that the sounds is off some thing definitely wrong it
Maxy would say get a new throttle cable if it snaps could crash (happened to me)
Fairing kits for this bike are cheap on ebay.
Got that face reveal we been waiting for , whazz Good baybeeeey! (Nice tash bro) GSXR looking fresh to death as well keep it up
Maxy is becoming a gsxr boi
Gsxr will look even better if you'll get a full fairing made with all the exact same factory graphics with which it used to come.
Maxy got blazed and tried to be an artist on the tank lol
Hey maxy... will u come to Norway sometime? Love ur videos btw!
Check your charging. Reg rectifier or stator. Will cause poor spark and loss of power
What up Maxy How's the build?
25:17 face revealed 😂🤫
Been waiting to see you kill this beast bro
Question homie I’ll like to buy a bike but I’m a beginner should I start on a R6 or should I go lower bike?
But this came out like this right?
Shouldn't this go up against that?
What?
Yeah......
Are you sure?
But this was like that right?
Really?
Are you sure?
Oh yeah you're right....
😂😂😂😂
Gotta love Maxy.