Arduino Uno Icloud BYPASS using Usb Host shield 2.0 Error Upload Fix
HTML-код
- Опубликовано: 19 авг 2020
- This error fixes upload error on USB Host Shield Specially when you brought New One for Bypassing icloud on A5 devices.
error include: avrdude: stk500_getsync(): not in sync error message
📢 Help me Reach 3k subscribers and be sure to like my video, comment below if you have any question hit the notification bell 🔔 and also accepting Donations Thank you
📣suggestions are highly appreciated Хобби
Thank you very much sir, its working
no problems boss.. palike and subscribe narin bossing 👍👍
thanks men you saved my day
Jay Bolonias no problem hit like and subscribe also🙂
thank you so much man :) thank you thank you thank you
welcome my friend.. dont forget to like and subscribe
I LOVE YOU SO MUCH ❤❤
Nice !! Thanks
no problem.. like and subscribe thank you
Thank you so much, man!!! The leds work just fine, the three flashes and the final static one, but... When I go to Sliver, it doesn't do anything. I have an Ipad 2,1, and yeah, I set it up to 8940.
You have missed something, did the upload successfull? if not try my windows version of setting up arduino here the link ruclips.net/video/OWsDGVf7krc/видео.html
@@ahchannel2014 drive.google.com/file/d/112k5X1HZxN_PJJk_capqa4_ZUlqdqhfT/view?usp=sharing I made this video with the arduino working, seems that's properly working.... And I watch your video, this one I record, I can only setup it on windows, the other one I can upload to the board either on mac or windows. The only different thing I did, is that I used a bash terminal with the windows subsystem for linux... LMAO
Hey, good news, it worked!!! I just needed to try alternate RD instead standard RD and it send the ramdisk right away. Do you know if there's a way to jailbreak this device (considering it's actual condition, of course)???
@@blaykxgreat you fix the issue,, did you try 3utools to jailbreak?
@@ahchannel2014 yep, I try it... But it give me an error in the very start.
Спасибо вам огромное
english?
@@ahchannel2014 help me bypass icloud on ipad 3
ipad 3 with simcard?
@@ahchannel2014 ipad 3 wi-fi
same process just download my files and latest sliver
Спасибо спасибо спасибо
Hi can you help me out mine upload well but it wont blink wen trying to enter pawend dfu
did you update your device to latest ios? if not you must update first
Kailangan po talagang hinangin yung part na yon? :((((
Bro I succeeded uploaded code to the board ❤️ thanks for that. But iPad mini isn’t enter pwned dfu mode I tried so many times but can’t can u help me soon please
ok did you restore your device first before you bypass. update to latest ios first
@@ahchannel2014 yes I restored it worked bro after so many times thanks❤️😘
@@nilashkafernando2837 welcome like and subscribe bro... thanks
👍👍👍👍👍
Yeah I’m having the same issue, it just says checkm8 started and nothing else can’t enter pwndfu
I don't have this problem. But I will make this small addition of tin ........ . But how did you go about the path? I put it in the library but is it the only one that doesn't go? Solutions? Thank you very much.
maybe u missed something watch my video carefully
@@ahchannel2014 Um .... . But what are you referring to? Of course I watched to the end of the video. Ok enable the usb port!!! Then in my case compiling the code but it crashes because of a problem (usb.h). I updated the library but it still doesn't detect it. Where did you 'paste the file usb.h ?
@@pierpa_76pierpaolo does your usb host shield has output supply? did you solder need to bridge those two
@@ahchannel2014 Yes yes everything is ok with the VBUS power supply !!! But the problem is on the software and not on the hardware.
@@pierpa_76pierpaolo did you figure it out?
Have tried it all over but still blinks after soldering the 3 but i discovered the orange colour starts blinking after soldering the 3.3v
press reset button, if problem persist you might have a factory defect board
@@ahchannel2014 it stopped blinking after servicing the usb host shield but still can't upload, though am not using red led cause I don't have it. Can't that cause it?
@@dukeaaron8201 even if you dont have led, it may work just count 20 seconds before you unplug the device.
@@ahchannel2014 My USB host shield does not upload successfully even after bridging the 3 points,but when i insert a flash or wifi usb to the host shield it uploads successful but i dont it doesnt enter pwnd mode and i do not know if the uploaded sketches really uploaded successfully cause its weird it only uploads whenever i insert a wifi usb to the usb host shield
@@dukeaaron8201 reinsert usb host shield or clean contacts pins
What was the tool that was use to heat it up ?
soldering iron
excuse me boss, I want to ask, I want to bypass my ipad mini 1 using Arduino Uno, at the step when I uploaded the synakuk checkm8 was successful, after that I unplug the Arduino from the laptop, after I unplug it I put my ipad into dfu mode, and I left it I continue to input the laptop into the host shield port on Arduino, after that I plug Arduino into my Mac ... but there is no LED light blinking or turning on ... what's the cause?
Check my new video windows version for arduino, and ipad mini 1 bypass, check if the code you use for ipad mini 1 is 8942? if the upload successfull just count 20 seconds before you unplug the usb cable.. mine too, red led light not work but bypass works for me and dont forget to like and subscibe my friend😊
It does not work for me, I have an ATmega328 processor but that option does not appear in the programmer bro :c
you have usb host shield connected? if yes just solder 3 joints like the video does
@@ahchannel2014 I already soldered the 3 pins , the usb host shield is connected and installed correctly
@@chillscapesound check if usb output has power plug it to your phone or any usb device or of you have tester measure the voltage on it, sometimes 3 or 5 volts are not present even if you solder the missing joints.
Thanks bro ! You're best
@@chillscapesound no problem bro
How can I bypass icloud on ipad 2,2 with sim card sir?
2 ways to bypass, hardware method and software method.
@@ahchannel2014 The method with arduido uno?😅
@@coltalb007 do you have arduino already or planning to buy one?
@@ahchannel2014 I have one but i don't know hot to use it. I have usb hostshield to, but is brocken from factory. I fount i neet tot solder 3 things on it...
@@coltalb007 i have video tutorials on my channel, yes you need to bridge supply to make it work. If you have macbook high sierra better
When i plug my ipad its directly boot how can i fix
you should put your device into dfu mode my friend
or you may watch my tutorial here ruclips.net/video/OWsDGVf7krc/видео.html
Yes first dfu mode then i plug to aurdino
After 10 sec its auto boot to apple logo
I also try 5 ipads same issue
please help. no lights on arduino uno at all..
Did you buy the original? Or the smd type
@@ahchannel2014 Not original. SMD
Soldered the 3 contacts but still not working.
@@taitimoproductions4801 smd type has different drivers
@@taitimoproductions4801 check drivers if installed correctly