@@elc1006 You have to move the rod to the upward position then push it down. It takes a good bit of force but the rod will go down allowing you to lock it in place.
@ 9:58 What does “down at this time” mean?? I don’t know how you have the table oriented. I ended up having them face down relative to the way the table should face, and I put it in wrong, with the plugs facing the wrong way. Now I have to disassemble the entire base of the table. “Down at this time.” 🙄 Why not say something more specific?
Hey there. I found it impossible to unscrew the nut at the left lifter (D) and board (7) because when I tried to unscrew the nut, the nut holder rotated alongside the nut, making it impossible to screw/unscrew. I tried to pinch the nut holder (the joint where the nut was screwed in) to avoid rotation but my bare fingers (plus some tools) couldn't really stabilize the joint. Any suggestions?
maybe a simple powerdrill would help get them in place? there's an 8V black and decker model that I use that might be of help, you can get it thru my affiliate link here: amzn.to/4cZbg8v
Hey bro. This is the best how to video I have ever seen. Excellent work.
awesome to hear, thank you, and will keep it up
Thanks for making the video! THIS was waaaaaaay easier to understand than the directions that came with the table.
My pleasure and glad you found it helpful! Thanks for commenting
Searched for this video because the instructions weren’t clear enough and I mixed up the levers, really appreciate this!
Happy to help!
OMG, this was a really good step by step very easy to follow, thank you. Happy holidays and New Year.
hey my pleasure to help and happy holidays! thanks for commenting
i just ordered one on temu : )
@@kashphiazaman9732That's where I got mine from! Make sure to save this video.
@@breckwarren6142 yeah done with assembling : )
I’m so glad this video is up because the instructions on the manual aren’t clear enough. Great job you’ve done!
My pleasure to help! Thanks for commenting 🙏🙏 enjoy the responses when people see u open it for the first time 😁
Thank you so much I just put together mine and your video was very informative
@@HeySoina hey ur welcome and thanks for commenting!
@@nicholasdemskiproductreviews❤❤❤
Video really helped, thank you !
hey my pleasure to help out! thanks for commenting and happy holidays!
Thank you this video really helped 🤙🏾
Glad to hear it!
Thank you you really helped me out
happy to help! thanks for commenting
GREAT VIDEO TUTORIAL!! THANKS
My pleasure to help!
I’m stuck from
10:12 to 12:58, the longer board doesn’t match with the wooden pins. When it goes in, it comes right back out.
Like it pops off and doesn’t settle? Have to tried weighing it down with some books or something? And then try carrying on until it’s bolted in place…
Having trouble putting the rod back in the bolt like you did @7:21. It won’t move when I try to push it
That’s what she said
Did you ever find a solution? I’m having the same issue.
@@kjones02did you figure it out? Mine is stuck
@@elc1006 You have to move the rod to the upward position then push it down. It takes a good bit of force but the rod will go down allowing you to lock it in place.
@@kjones02the “little bit of push” was deceiving lol. Thanks man
thanks nick!
hey it's my pleasure to help!
@ 9:58 What does “down at this time” mean?? I don’t know how you have the table oriented. I ended up having them face down relative to the way the table should face, and I put it in wrong, with the plugs facing the wrong way. Now I have to disassemble the entire base of the table. “Down at this time.” 🙄 Why not say something more specific?
if you go back maybe a minute or two into the video youll be able to see the orientation of how im building it and it should make more sense
Hey there. I found it impossible to unscrew the nut at the left lifter (D) and board (7) because when I tried to unscrew the nut, the nut holder rotated alongside the nut, making it impossible to screw/unscrew. I tried to pinch the nut holder (the joint where the nut was screwed in) to avoid rotation but my bare fingers (plus some tools) couldn't really stabilize the joint. Any suggestions?
It’s really hard for me to know what to do and offer help without seeing it for myself sorry 🙏
The screw holes for the lifters were too shallow and I'm not able to screw them firmly with a manual screw driver, any suggestions?
maybe a simple powerdrill would help get them in place? there's an 8V black and decker model that I use that might be of help, you can get it thru my affiliate link here: amzn.to/4cZbg8v
My only issue now is closing the raised table lol😊
is it not closing?
@nicholasdemskiproductreviews i was able to figure it out i had to be slow and steady instead of closing it quickly lol.
Oh yeah! And watch those fingers lol. I like to grab the table top by each side in the middle and slowly raise and lower the two arms together
Hey the damping rod is not going back in the hole. I have pushed it with all my strength
I’m having the same problem
Did you figure this out
I can't understand the levers.