HTML-код
- Опубликовано: 7 сен 2024
- Remember to subscribe !
I review the new Siglent SDS1104X-E, a 4 channel scope which has optional AWG, WIFI, and 16 channel MSO functionality.
This new scope has a bode plot feature, which can be used across 3 channels to detect the amplitude and phase relationships compared to the reference signal from the 25MHz AWG (the SAG1021).
I press lots of buttons to check out the included the features.
Measurement & Analysis Instruments: goo.gl/gPxTxT
Give this a Thumbs Up if you like it share the video with your friends, it helps to grow the channel.
To donate money to the channel please use one of the methods below, cheers !
Patreon: / thedefpom
PayPal Donations: www.paypal.com...
Test equipment appeal: • #84 Appeal For New or ... #ifixstuff #thedefpom #electronicsrepair
TheDefpom Merchandise: teespring.com/...
==========================================
Some Of My Electronics Tools (video and purchase links)
==========================================
Boonton
------
4220.
8210: defs.link/?u=e...
Fluke
------
8842A:
45: defs.link/?u=e...
343A: defs.link/?u=1...
5200A: defs.link/?u=a...
540B: defs.link/?u=0...
893A.
A90.
HP/Agilent/Keysight
------
4261A: defs.link/?u=0...
5005A.
5342A 18GHz: defs.link/?u=5...
6181B: defs.link/?u=b...
8012B: defs.link/?u=c...
8648B: defs.link/?u=d...
8901B: defs.link/?u=5...
DSOX1102G: defs.link/?u=a... defs.link/?u=1...
E3646A: defs.link/?u=1...
Marconi
------
2022D.
2955.
TF2103: defs.link/?u=6...
Rohde & Schwarz
------
SMY: defs.link/?u=9...
CMU200: defs.link/?u=8...
Polarad SPN: defs.link/?u=2...
Siglent
------
SDM3065X: defs.link/?u=1... defs.link/?u=1...
SDS2102 (hacked to 340MHz): defs.link/?u=1... defs.link/?u=1...
SPL-1008.
SDP1168X: defs.link/?u=1... defs.link/?u=1...
SDL1020X-E: defs.link/?u=a...
Other Equipment
------
KSGER T12 Soldering Iron: defs.link/?u=6... defs.link/?u=5c...
Quick 861DW: defs.link/?u=1... defs.link/?u=a...
S-993A: defs.link/?u=0... defs.link/?u=e...
EEVBlog BM235: defs.link/?u=1...
YR1030 Battery ESR: defs.link/?u=c...
Heathkit IT-12 Signal Tracer.
Racal Dana 1992: defs.link/?u=8...
Bird 43: defs.link/?u=4...
Sinadder 3: defs.link/?u=2...
Audio Control SA-3050A RTA: defs.link/?u=a...
Korad KA3305D: defs.link/?u=6...
PDVS2mini: defs.link/?u=8...
Valhalla 2703: defs.link/?u=0...
Feeltech FY6800: defs.link/?u=8... defs.link/?u=34...
Eakins Microscope: defs.link/?u=b... defs.link/?u=2...
Mustool G600: defs.link/?u=b... defs.link/?u=3...
Handheld Equipment
------
Uni-T UT210E: defs.link/?u=3... defs.link/?u=e...
DER DE-5000: defs.link/?u=0... defs.link/?u=1...
MK-328: defs.link/?u=0... defs.link/?u=7...
MESR-100: defs.link/?u=0... defs.link/?u=0...
ESR Meter: defs.link/?u=0...
HOPI: defs.link/?u=7...
PeakMeter PM6252: defs.link/?u=5...
HS1010: defs.link/?u=1...
Thermal Camera: defs.link/?u=2... defs.link/?u=4...
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
I just bought one, based partly on your review. Thank you for posting it!
So what do you think about it after 4 months ? :)
@@aneeshprasobhan It is overkill for me needs, but really easy and fun to use. Easily my best investment into electronics as a hobby.
@@StephenHermer thanks for the reply. I'm also planning to buy one next month. Hope the prices wont increase then :)
Nice man! I've got the 1204X-E myself so I got a better understanding of the features.
Thanks!
I've just ordered the same identical scope online, that's why I'm watching your video, getting to know it.
Ooops 50.0001MHz
I suppose the one is not 1 Hz, but 100Hz.
1 Hz would be 50.000001 MHz, but I suppose the scope will not show 1Hz precision on 50MHz signal.
Thanks for the review.
300 and 400 MHz, most probably you need to get adequate probes.
Maybe the probes capacitance values are distorting the waveform.
cant we turn off the f. beeps?
lex Tr3 - yes there is a setting option to turn off key beeps.
I have SDS1104X-U. I am uncertain if the peak to peak measurements (have a siglent signal gen also) as when I put in say 500Hz 400mV pk-pk signal it reads pretty far off. I have probe set to 1x, and the weird part, the division scale graticule I can read and calculate V/division and it seems to be more to trust, but it doesn’t agree with the measurement output. Also, is there a way (without hooking up a pc) to have two or three channels at the same time display say voltage pk-pk so I can check gain easily? I suspect not. Seems like I have to choose one, then do the same on the other but never both at the same time. Any help appreciated. Is the problem with impedances on the reading of values?
It will be based on a 50 Ohm system, so to get the correct reading you need to allow for that, so if it’s 400mV p-p at 50 Ohms the scope input also needs to be set to 50 Ohms, I don’t think that scope has a selectable input impedance, so the way to do that is to use a through terminator (if you are using a bnc cable to connect, rather than a probe) Also if you use x1 on the probe you limit the probe and scope bandwidth considerably, usually to around 6MHz or so, and can load down the circuit under test, avoid using 1x if you can.
@@TheDefpom wow! Thanks for the quick response. I’m seeing in the manual (not sure it covers my model) possibility to set the output impedance of the signal generator. The signals are so small, and I’m always confused on this, X 1 setting on probe is self explanatory, but the 10x setting…magnifies or is it that it takes 10 X the signal to show same vertical as the 1x
? Thanks so much for the reply!
@@shader26 x10 means it divides by 10 so you have to multiply by 10, or set the scope input to be 10:1
@@TheDefpom thanks. Again. It’s very basic, but it always threw me with the X… so when I also set the scope to be configured that I am using a x10 probe, I will just have to change V/div much lower as it’s a small signal.
Thanks for sharing the video. In addition to the sine wave to test bandwidth, how about using a square wave for a more realistic test?
Kermit Frog - I don’t have anything that can generate a square wave above 10MHz. I was checking for useable sensitivity which goes well beyond that.
Is that only my opinion or this oscilloscope is lagging so much? I don't remember that problem in DS1054Z for example.
So 4 years on do you still use this scope and how has it faired? I am in the market for a scope for amongst other things the serial decode (SPI and I2C). Have you used it for this and how do you rate it? Finally how do you rate the long term reliability and support of the Siglent scopes? Thank you
The review unit isn't the one I own, but I did end up buying one later and I have been very happy with it, great feature set for the money, the decoding is especially useful, I actually own 3 Siglent scopes.
#e4kdh089 bought one 2 weeks ago, also partly thanks to your review. Very happy :)
Hi Afrikaner, Im from Brazil and I would like to get a sds1104x-e as well. How is it after 4 months? have u noticed some bug or something like that?
@@wesleykrause5795, I'm happy. I'm a novice hobby enthusiast. It was a huge upgrade from a DS0212 pocket scope.
I considered a Rigol-1054Z, and Owon-4 ch scope but got this and now very satisfied.
@@vegtersbaas thanks for the answer! I'm looking into a Keysight dsox1204A and this one, I'm still not sure which one I should get, they both look good and full of resources.
doese this scope provide current measure mode? i have this scope but, can not found current per div set up
Yes, I think most scopes allow you to switch the measurement type. Press the channel button you want to switch to "A", go to the second page using the button below the screen, then press the left most button to switch the "Unit" between V and A.
@@TheDefpom thank you for your answer! i found it
Is the sds2104x plus worthwhile upgrade?
I have been very happy with my 2104 x plus.
did you find out if the non siglent wifi dongle worked?
yes it did.
Did you try the 200MHz hack?
LutzSchafer - not my scope, it was on loan for review.
@@TheDefpom
I looked for hack info for this scope and could not find it.
@@RESISTAGE I found instructions here. I might try it when I receive my scope this weekend.
www.eevblog.com/forum/testgear/unlocking-siglent-sds1104x-e-step-by-step/
you mean a differential probe ? :)
Kees Hessels - yes, yes I do.
Sorry to say, but this is one bad review video. Not prepared the script/agenda... most of the time trying to find pieces around or talking about pretty obvious stuff, e.g. how to connect USB etc.. or how your home wifi is configured?! ... or not sure how a this and that feature works... what is the review then about?! The valuable content could probably be summarised in 10-15 mins.. Don't mean to offend, more like positive critic... Simply get organised better when shooting a video, provide useful content only, or do better editing, cut out unnecessary stuff... Just a humble opinion.
Goran Radivojevic - I already cut out 35 minutes of footage, and I did research scope features etc, I own a Siglent scope but it has a different button layout so it kept making me lose my way as buttons weren’t where I am used to them being.
Goran Radivojevic Yea, kind of a stream of consciousness review
I got the same impression. Not organized, clearly fumbling through things in an ad-hoc manner. I quit after 4:45 - looked at the progress bar as thought, "Nah mate, not 58 minutes of this." No disrespect, but when I go looking at technical equipment reviews, I kinda expect a little more organization.
@@Reddgum I made it to 9:00 before I thought to myself "What the hell am I watching right now". This is not a review, it's just some random mumbles and thoughts.
Not a clear presentation of the scope's abilities. Fragmented. Of course, I'm American and have to deal with the accent.
I am Spanish and I DO deal with the accent of any native english speaker. ;)
@@franciscojavier4270 , Good for you. We all try so hard to understand everyone.
You don’t speak English ? 😂 He just understands trailer park . Should have equated everything to beers and possums 🍻
The popups are annoying, FYI
tablatronix - thanks for the feedback, I was trying something out, I won’t do that again.
TheDefpom you can keep it but its distracting the way it is now, noticed it last few vids, maybe smaller on the side less colors shrug.
tablatronix - oh you mean the text I put in, to remind people to subscribe etc... I thought you meant the white banners that advertise other videos, as I just started to put more of those in. Ok I will look at the text pop ups to see if I can make them interfere less, but they do need to grab attention in order to work (my subscriber rate increased as soon as I started using it, so they do work to remind people)
TheDefpom Yeah the brown giant text