Align E1-900 & Align T-Rex 700 RC helis

Поделиться
HTML-код
  • Опубликовано: 28 дек 2024

Комментарии • 8

  • @ArcStriker
    @ArcStriker 11 месяцев назад

    Very nice job on the repair, that's a large heli!

    • @edster9221
      @edster9221  11 месяцев назад +1

      Hi ArcStriker.
      It certainly is a beast! They are manufactured for crop spraying, hence the cut outs at canopy sides where 7.5lt fluid containers are located. The spray booms are located below that (why such tall landing gear is required)
      If one has need of this unit for spraying, it comes assembled & tested. Quite awesome to see it in action.

  • @111Vengeance
    @111Vengeance 3 месяца назад

    Is the 900 worth it for more payload?

    • @edster9221
      @edster9221  3 месяца назад

      Hi 111Vengeance.
      According to the factory specs/details, when fully kitted out with the spray equipment + electronics, the max take off weight is 37kg's.
      Mine, with GoPro & FPV system = 12.5 kg's
      I have countdown timer set to 20 mins & fly regularly that duration. Have had 26 mins duration but incurred the power reduction safety mode i.e reduces power by 20% allowing a safe decent & landing (this is set up in the ESC programming)
      Hope this answers your question.

    • @111Vengeance
      @111Vengeance 3 месяца назад

      @@edster9221 Many thanks.
      What's your battery mah?
      And headspeed if you know it.
      Looking to run this on 6s if it's possible

    • @edster9221
      @edster9221  3 месяца назад

      @@111Vengeance
      Oooops, sorry I forgot those "minor" info bits. 16,000Mah x 2 Weight =4 kg's. Recommended HS around the 1400 mark.
      I reckon mine is about 1500??
      I would be "somewhat reluctant" to even consider using 6S.
      4

  • @obd-zi4lq
    @obd-zi4lq 9 месяцев назад

    hello ! i wanted to connect an FTS system to my align 900, should i use With 8-way male/male connectors for
    connection between autopilot and ESC ( if i can do that ? ) , or should i get a CC ESC with wires to solder ? I got the civil protection align version. Can any of this connect to the AP2 or wherever it is to connect them ? Kind regards

    • @edster9221
      @edster9221  9 месяцев назад

      Hi abd
      Apologies on this question, as mine is a "normal" flyer only i.e NO autopilot etc; etc. Stick input at all times (like my olde 700 gasser)