Takk! A lot of useful information here. However, the video does not show all the steps in the repair process. What happens (or may happen) with the regulator mechanism on the back side of the pop riveted wall when you remove the motor/control unit? I suspect that my problem is due to a fault in the control unit and was hoping to be able replace the motor/control unit without having to take off the riveted wall.
Hello. I know that the video is out of focus. I was recording it with my phone. At 17:26 I´ll explain that the window is held by two plastic clips that you just push them into place in the holes. The installation of the window is strait forward, it just slots in place and slides down to the mountings and there ju push in the plastic clips.
@@LarsSchonthal Tack för ditt svar, jag hade provat med 4,8*16mm, men för små, och svårt att hitta större i butiker i Frankrike, jag lyckades sätta bultar... Tack så mycket för ditt svar och bra jobbat mycket rent!
Very helpful. Thanks for taking the time to make this video.
Bloody hell that's a lot to get down to, but I might as well get started.
Takk for fin video og kjekt at den er på svensk. glad norbergere
Hej, kul att du gillar den.
Takk! A lot of useful information here. However, the video does not show all the steps in the repair process. What happens (or may happen) with the regulator mechanism on the back side of the pop riveted wall when you remove the motor/control unit? I suspect that my problem is due to a fault in the control unit and was hoping to be able replace the motor/control unit without having to take off the riveted wall.
Bra video. Har fått samma problem själv. Bara beställa ny panel då ☺️
Tack!
Ja, då vet du vad du har att se fram emot. Lycka till. Det är inget svårt jobb, bara att skruva.
Tack! detta var till stor hjälp då jag ska byta ut ksbelhärvan i dörren
Kul att du tycker det. Lycka till!
My skoda octavia wiring problem. Please help me.
Heißt der Octavia in Schweden tatsächlich Oktavia weil die da kein c haben?
Eska kharch kitna ata hai bhai
Tack
Kul att det kunde vara till hjälp för dig.
Good video but the focus on the camera is terrible and the video doesn't show you how to take out and put it in the glass.
Hello. I know that the video is out of focus. I was recording it with my phone. At 17:26 I´ll explain that the window is held by two plastic clips that you just push them into place in the holes. The installation of the window is strait forward, it just slots in place and slides down to the mountings and there ju push in the plastic clips.
tack för videon vilken storlek nitar använde du för att fästa panelen igen tack
Hej, jag har för mig att jag använde mig av en 5mm borr och nitarna var 5 x 15 mm.
mvh.
@@LarsSchonthal Tack för ditt svar, jag hade provat med 4,8*16mm, men för små, och svårt att hitta större i butiker i Frankrike, jag lyckades sätta bultar... Tack så mycket för ditt svar och bra jobbat mycket rent!
Tack för de uppmuntrande orden.
Bra video 👌🏻 Synnerligen idiotiskt att allt ska vara popnitat 😅👌🏻
Jo men tyvärr så är de flesta fabrikat nitade. Finns dock några undantag som sitter med 10mm bult.
Pura thik karne ka
focus