This thing looks amazing. I love the wheel and tire stance, the roof rack delete, and the blackout takes it over the top! I've always loved the FX's and this one just puts icing on the cake for me! Beautiful work!!! 🤩👍🏽👌🏾,✌🏽❤✊🏽
I have the front and rear GTR wheels on my 17 QX70 with 265 and 295, respectively. Put 25mm spacers on the front to match the overall offset with the rears. Looks exactly like your video shows. Almost need to reduce the front spacers by 5mm and add 5mm to the rear. Overall LOVE the wheels and tires on the vehicle.
This looks super fire man, I'm not a black on black fan I got a 08 ex35 but man those wheels and that type or black and condition of this compliments each other extremely well!!
Beautiful, I have the same model and am looking for tires so impeccable timing for this upload. Would love more info on removing the roof rack and blacking out the rest of trim. 😎🖤
Ha me too. i got mine Thursday. I been looking at rims and chrome deletions all day. The only thing I need to find is the black grille. Are those 18 inch rims?
@@EdBwoyAny update on the roof rack / blackout trim / chrome delete? Just got my 2013 FX37 and 2014 QX50 and have been swimming in your videos. Appreciate all the content!
Its criminal they didnt make it as G/M/Q50 series wagon with this styling, but lower tk the ground and on smaller wheels(18/19). Add a stick to that V8 and would be just perfect. I still dont get it why the styling of it neer made it to other Infiniti models. G37 got those ugly grilles and very characterless headlights in 2008+ models. FX 2nd just looks amazing and always will, just a shame nothing else inherited the look in full. Q50 probably being the closest it ever got but even then not quite.
I really like the chrome delete since it makes it look more modern. I think a 10.5 wheel with an offset off +35 would fit better in the front if not lowering IMO.
Man i still haven't figured out my coolant issue on my Fx35, tried everything... New Fans, New radiator, new thermostat, new cap, new coolant temp sensor. I'm not losing nay coolant, it just wont go back into the radiator.... so i have to siphone it from the reservoir to the radiator, its annoying.
Front looks like 21" FX oem wheel with 20mm spacer with 265/45/21 and the rear looks like oem wheels with 25mm spacers. At present, I have my OEM 21" wheels and I am looking for tire size 285/40/21 X4 for my FX50 with 15mm spacer in front and 20mm spacers at the rear.
Is that just with GTR OEM wheels no spacers I want that look like the BMW X5 or did u add spacers as well thanks for the video I have Fx35 2012 all black on black as well
Just GTR wheels with no spacers. But he used the rear wheels, which are 10.5 inches wide. If you're interested, I have some GTR wheels for sale and I might be able to get you a full set of rears
For my 2015 QX50 I’m thinking I wanna do F- 19x9.5 35 & R - 19x10.5 30 in the back but not sure I don’t want poke like this one had in the front or rubbing ! And if I need spacers I can always had little , what you think ?
Your desired specs are close to the Nissan 370 *Nismo* OEM specs. Thing is, that's kinda wide and I believe it will poke out considerably. What is your current wheel setup? I wonder if a setup like my 370z *Sport* rears would work out for you. ruclips.net/video/4FmZ9nVwtik/видео.html
@@EdBwoy I will check out that video you linked , right now they’re the stock 19s that the 2015 Qx50 came with - part - 43001BU4A - 5 spoke style ! you think even with that low of a offset it would still poke in the back ? the reason I’m considering 9.5 In fronts it incase I need to adjust with spacers of some sort and I was thinking in the back it would be okay for 10.5 ! appreciate the feedback I’m looking at the ESR RF2 btw if you don’t mind checking them out and what they offer they’re on eBay as well with different offsets , let me know I could go 9.5 all around as a square setup just thought that back being thicker would look a lot nicer thanks bro !
@@vciq what I would suggest is buying a few different spacers and trying them with your wheels, to get your current wheels to sit exactly where you want them. Then with the spacer sizes written down for the front and rear, you can now calculate what to go with for your replacement wheels. I can help you with the sizing a little better once we have that info.
You actually could! Some people do that already, but the fitment is very close to the stock FX50 wheels. It's all about the look you're going for: 1. Some like the very aggressive look of all rears 2. Some don't mind staggered 3. Some even go for all fronts, keeping similar tires for wheel rotation 4. Some people just want 20-inch wheels for better tire choices and don't care if they are staggered or not
Hey guys. A lot of guys go with a 295 on them in this case. Is that 10.5" still good with the 295 in your opinion. If lowering on H&R ~1.3" front do you think there would be any issues with those 10.5? If someone goes with standard gtr wheels front and rear any issues with staggered tire sizes? Also you guys know exactly what fuse to pull to make it rwd only? Thanks
With tires, it's up to you and the look you want. If you want even more meat on your wheels, then get wider tires. I don't see any issues with running a staggered tire size but you just have to calculate the numbers properly to make sure the rolling diameter isn't too far off. For example, use 265 on the 9.5 wheels, and 295 on the rear with the 10.5
I would go to the forums to see if anyone has tried it. I think 285 will work but unsure if it will work with H&R lowering. The wheel wells are pretty huge but with wider wheels AND tires and lowering... All bets are off!
My Instagram friend has been doing stance for 15yrs... Usually wheels get bigger and the profile series goes down ... Perhaps if you did 295 40 20 on staggered set up?
I have a set of the 10-spoke wheels in perfect shape. I would like $1,650 which will cover shipping if you are in the US. ruclips.net/video/EWhsNiD2y9Y/видео.html
K&N drop in filters , full exhaust and tune. There's literally no other options out there. Do the exhaust right and you should be at 420hp with a good tuner.
20 x 10.5, offset 25
265/50/20
This thing looks amazing. I love the wheel and tire stance, the roof rack delete, and the blackout takes it over the top! I've always loved the FX's and this one just puts icing on the cake for me! Beautiful work!!! 🤩👍🏽👌🏾,✌🏽❤✊🏽
265 50 20 is stock size for gen 1 FX35 FX45. 275 also fits.
I have the front and rear GTR wheels on my 17 QX70 with 265 and 295, respectively. Put 25mm spacers on the front to match the overall offset with the rears. Looks exactly like your video shows. Almost need to reduce the front spacers by 5mm and add 5mm to the rear. Overall LOVE the wheels and tires on the vehicle.
Please post some video (or pictures) for us to see!
This looks super fire man, I'm not a black on black fan I got a 08 ex35 but man those wheels and that type or black and condition of this compliments each other extremely well!!
I generally avoid owning black cars if I can, but this one executed the look perfectly. I had to try it myself
How does it ride and handle does rub wen turning
Beautiful, I have the same model and am looking for tires so impeccable timing for this upload. Would love more info on removing the roof rack and blacking out the rest of trim. 😎🖤
R22 👍
Ha me too. i got mine Thursday. I been looking at rims and chrome deletions all day. The only thing I need to find is the black grille. Are those 18 inch rims?
When I catch up with the owner next time, I hope we'll have some time to cover the other modifications he has on his FX.
@@twillz63 the GTR wheels are 20 inches in diameter
@@EdBwoyAny update on the roof rack / blackout trim / chrome delete? Just got my 2013 FX37 and 2014 QX50 and have been swimming in your videos. Appreciate all the content!
Its criminal they didnt make it as G/M/Q50 series wagon with this styling, but lower tk the ground and on smaller wheels(18/19). Add a stick to that V8 and would be just perfect.
I still dont get it why the styling of it neer made it to other Infiniti models. G37 got those ugly grilles and very characterless headlights in 2008+ models. FX 2nd just looks amazing and always will, just a shame nothing else inherited the look in full. Q50 probably being the closest it ever got but even then not quite.
I really like the chrome delete since it makes it look more modern. I think a 10.5 wheel with an offset off +35 would fit better in the front if not lowering IMO.
It will be on coilovers soon. Just have to find the time.
@@Ring.Gap419Where did you get the window visors? I bought the wrong ones for mine.
This car is Gorgeous how old is this vehicle
2010
@@Ring.Gap419 it’s gorgeous
I got gtr wheels..what tires u recomend for 2016 lexus rx350.same bolt pattern
Nice, just happen i did the same setting too, with GTR wheels on my QX70, prefect fitting & the wheels are from Rays way lighter than stock Enkei. 👍
Nice! Did you go with staggered wheels or all the same size?
Is the front drivers side wheel a different color than the rest? Check the vid 1:22 - 1:32
The front 2 wheels are dark grey. The rears are black. I'm planning to have them all powder coated black chrome.
Man i still haven't figured out my coolant issue on my Fx35, tried everything... New Fans, New radiator, new thermostat, new cap, new coolant temp sensor. I'm not losing nay coolant, it just wont go back into the radiator.... so i have to siphone it from the reservoir to the radiator, its annoying.
Same. A few ppl have mentioned that it could be the water pump.
@@bonafide_forever mind was a headgasget and water pump, changed it all now working perfectly fine. No issues!
@@DTUFINOPhotography wow!! Thanks for letting me know.
Front looks like 21" FX oem wheel with 20mm spacer with 265/45/21 and the rear looks like oem wheels with 25mm spacers. At present, I have my OEM 21" wheels and I am looking for tire size 285/40/21 X4 for my FX50 with 15mm spacer in front and 20mm spacers at the rear.
Yeah, pretty close on the numbers.
What look or size did you end up settling on?
That car looks so sexy...it still hurts me that its no longer in production☹
Yea it looks amazing without the roof racks
What type of tint on rear lights is it?
Number plate “Bratva” 😄 Hello from Russia ⚡️
Hahaha. I'm going to ask him the story behind the plate. I did not know it had any special meaning until I saw your comment and googled it
@@EdBwoy it's like a “brotherhood” 🤝
How much did it cost to take off the rails I have the same car but 2017
They look beefy and aggressive 💪🏼💪🏼
I have made videos with spacers and all, but it's a different thing to see it in person. You appreciate the look differently
@@EdBwoy I think it would look better on a muddy grey body with an upgraded roof rack for the excursion look
I went with 315/35r20 out back and 275/40r20 up front. Love the wide stance
Can you do a close-up of the roof rack delete? I want to know what he used to cover those holes.
Just use vinyl wrap. I had carbon fiber on it but decided to remove it and now it will be plain gloss black vinyl. It works great.
Is that just with GTR OEM wheels no spacers I want that look like the BMW X5 or did u add spacers as well thanks for the video I have Fx35 2012 all black on black as well
Just GTR wheels with no spacers. But he used the rear wheels, which are 10.5 inches wide.
If you're interested, I have some GTR wheels for sale and I might be able to get you a full set of rears
What size tires are those
For my 2015 QX50 I’m thinking I wanna do F- 19x9.5 35 & R - 19x10.5 30 in the back but not sure I don’t want poke like this one had in the front or rubbing ! And if I need spacers I can always had little , what you think ?
Your desired specs are close to the Nissan 370 *Nismo* OEM specs. Thing is, that's kinda wide and I believe it will poke out considerably.
What is your current wheel setup?
I wonder if a setup like my 370z *Sport* rears would work out for you. ruclips.net/video/4FmZ9nVwtik/видео.html
@@EdBwoy I will check out that video you linked , right now they’re the stock 19s that the 2015 Qx50 came with - part - 43001BU4A - 5 spoke style ! you think even with that low of a offset it would still poke in the back ? the reason I’m considering 9.5 In fronts it incase I need to adjust with spacers of some sort and I was thinking in the back it would be okay for 10.5 ! appreciate the feedback I’m looking at the ESR RF2 btw if you don’t mind checking them out and what they offer they’re on eBay as well with different offsets , let me know I could go 9.5 all around as a square setup just thought that back being thicker would look a lot nicer thanks bro !
@@vciq what I would suggest is buying a few different spacers and trying them with your wheels, to get your current wheels to sit exactly where you want them.
Then with the spacer sizes written down for the front and rear, you can now calculate what to go with for your replacement wheels. I can help you with the sizing a little better once we have that info.
If you are looking to do this somewhat soon, you're welcome to send me an email and I can explain better. edbwoy@gmail.com
Wait... I just realized the GTR comes with staggered wheels and it's AWD. why can't we run staggered wheels on the FX50?
You actually could! Some people do that already, but the fitment is very close to the stock FX50 wheels.
It's all about the look you're going for:
1. Some like the very aggressive look of all rears
2. Some don't mind staggered
3. Some even go for all fronts, keeping similar tires for wheel rotation
4. Some people just want 20-inch wheels for better tire choices and don't care if they are staggered or not
this looks so good
Hey guys. A lot of guys go with a 295 on them in this case. Is that 10.5" still good with the 295 in your opinion. If lowering on H&R ~1.3" front do you think there would be any issues with those 10.5? If someone goes with standard gtr wheels front and rear any issues with staggered tire sizes? Also you guys know exactly what fuse to pull to make it rwd only? Thanks
For RWD, it's called the ETS fuse - ruclips.net/video/yCJT9HpC1oM/видео.html
With tires, it's up to you and the look you want. If you want even more meat on your wheels, then get wider tires.
I don't see any issues with running a staggered tire size but you just have to calculate the numbers properly to make sure the rolling diameter isn't too far off.
For example, use 265 on the 9.5 wheels, and 295 on the rear with the 10.5
I would go to the forums to see if anyone has tried it. I think 285 will work but unsure if it will work with H&R lowering. The wheel wells are pretty huge but with wider wheels AND tires and lowering... All bets are off!
My Instagram friend has been doing stance for 15yrs... Usually wheels get bigger and the profile series goes down ... Perhaps if you did 295 40 20 on staggered set up?
@@EdBwoy Thanks! Would it give more power to the rear wheels? No ETS Full VDC off?
How much for a set 4 rears ray style
I have a set of the 10-spoke wheels in perfect shape. I would like $1,650 which will cover shipping if you are in the US.
ruclips.net/video/EWhsNiD2y9Y/видео.html
Does anyone have any tips for more power for the car?
K&N drop in filters , full exhaust and tune. There's literally no other options out there. Do the exhaust right and you should be at 420hp with a good tuner.
Do you sell this car?
This one is someone else's car and he still has it
Looks badass
Agreed!
How would it look with a gtr motor.
Lol, it would probably look the same, but be a super sleeper.
Thanks for the vid!
🔥
S51 need only 21's or 22's wheels. 20's too little for this 2nd Gen. It's look like Mitsubishi Delica.
🤣🤣🤣 21 inch wheels can be a pain sometimes
Some of them came with 18ninch wheels
Agreed I have the sport 21s and im buying 20s.
At his is beautiful man
Anyone that puts BRATVA on they’re plate definitely isn’t Bratva.
Did you buy the L?????????
A little late on catching up, but we know the answer to this now, haha
@@EdBwoy ❤️ 💙 💜 😆 🤣 😂 😹
Братва приехала сразу видно
BRATVA
❤❤❤❤❤
👍👍👍❤️❤️❤️
JUST DON'T PUT H & R LOWEINGS SPRINGS --- ON - I DID SMALL (1") DROP ON MY 2013 FX37 & IT RIDES LIKE F SHIT! JUST WAISTED $2K! DONT DO IT!
Did you replace the shocks too?
Hah)) BRATVA..)
Someone else mentioned that so I had to find out what it means, haha!
not nice
Get the Fx50s or sport wheels …. Those GTR wheels look like last gen fx wheels 🤮
Doesn't mean they are bad just because they look like something else. But there are a lot of advantages to switching from 21 inch wheels