Thanks for replying. I followed your guide but now the WiFi signals are very low. Only captures good signal when I'm 1 meter away. Have you encountered similar to this?
@@AlexanderBestMobile the UFL antenna cable is working good as I know how to test it using multitester. But the daughterboard UFL connector's ground and pin seem to be shorted. Can you test yours if it is shorted too?
@@AlexanderBestMobile how much time and how many degrees u have it on the bed for. - im gonna use an ansai 918B heat bed - im still learning the process . thx m8
Hello ! I have a problem, I followed the tutorial everything works .. however my power button is kept pressed, the phone turns off and on again. The power button is not repositioned like the volume button. Any idea?
@@AlexanderBestMobile i have nothing to tighten? The power button does not react like the volume, there is a little red thing behind the power button, and when it makes contact and pressure on the printed circuit it does not come back on it like the volume button.
Добрый день, спасибо ещё раз за видео, все сделал как надо. Всё включается. Один момент - батарея не хочет заряжаться. 0 процентов и все, телефон выключается. Правда батарея лежала год без заряда. Не подскажите где копать?
Попробуйте ее «разогнать» тобеш зарядить принудительно. Либо жабкой либо ЛБП либо обычным зарядником на 5 в. Плюс к плюсу минус к минусу, так чтоб на ней было хотя б 3,4 В.
Спасибо. Единственное адекватное видео полной разработки.
Fantastic vid that not only shows a comprehensive guide but has party esq music feel to it also!
Cheers
have a fun party)
Extremely useful
Merciiiiiiiiiiiiii !!!!!!!!!!!!
Thanks for sharing. Great to see.
Heyyy Alex your video was amazing...with Red Bull? Jajaja best regard from México
Where you buy the frame and display
Thanks for replying. I followed your guide but now the WiFi signals are very low. Only captures good signal when I'm 1 meter away. Have you encountered similar to this?
Are you connecting the Wi-Fi connector correctly? Did you damage him? they are very fragile
@@AlexanderBestMobile the UFL antenna cable is working good as I know how to test it using multitester. But the daughterboard UFL connector's ground and pin seem to be shorted. Can you test yours if it is shorted too?
It’s a pain power flex cable teardown, I’m afraid I could damage it trying to put a cutter under it....you did so, did you?
Good job, thanks :)
what did you use the heated bed for?
I use it to soften the glue under the battery and under the flex cable
@@AlexanderBestMobile how much time and how many degrees u have it on the bed for. - im gonna use an ansai 918B heat bed - im still learning the process . thx m8
Hello ! I have a problem, I followed the tutorial everything works .. however my power button is kept pressed, the phone turns off and on again. The power button is not repositioned like the volume button. Any idea?
Hikinata hi, try to put something thin under the bolts, or do not tighten the bolts to the end
@@AlexanderBestMobile
i have nothing to tighten? The power button does not react like the volume, there is a little red thing behind the power button, and when it makes contact and pressure on the printed circuit it does not come back on it like the volume button.
Hikinata try to disconnect the flex for buttons from mainboard and plug the charger. Will it only charge or cycle on/off.
@@AlexanderBestMobile
That's what I did .. but it's not cool ... I bought a screen with a frame thinking it would be easy .. but in the end ..
I don’t know that happened to my phone, but there where a lot of Tiny puncture holes
Добрый день, спасибо ещё раз за видео, все сделал как надо. Всё включается. Один момент - батарея не хочет заряжаться. 0 процентов и все, телефон выключается. Правда батарея лежала год без заряда. Не подскажите где копать?
Попробуйте ее «разогнать» тобеш зарядить принудительно. Либо жабкой либо ЛБП либо обычным зарядником на 5 в. Плюс к плюсу минус к минусу, так чтоб на ней было хотя б 3,4 В.
@@AlexanderBestMobile а не, все пошло. Спасибо. Минут 20 подумала и начала заряжаться.
mine its not turning on....
Mera mobile ka screen dameg ho gya aap kuch kar saktai hu
Mera pas mobile hai aap bana sakti ho
Nm