David here. I've been a Journeyman Electrician for many years. I've worked on a lot of small service calls, and rewired a lot of old houses and mobile homes. But, I've worked on a coal fired power plant, and a lot of big commercial jobs - schools, banks, warehouses, office buildings, a mall, fire stations, Army Reserve Center, etc... The point is, I've seen a lot of people in construction trades - red iron erection, metal studs, concrete, block and brick layers, plumbers, all kinds of roof work, ceiling grid and acoustical tile installers, painters, fire and security alarm specialist, elevator installers, window and door installers, duck work, air conditioning and heating, and a lot of sheet rock installers and mudders, etc... I say all that to say this. It's a rare thing for me to see such great craftmanship as the gentleman in this video. Great job.
I think you are correct for this particular design but take a look at his other videos. Those may not be any easier to pre-assemble. ruclips.net/video/4LG4NiZrctY/видео.html
بسم الله ماشاءالله عليك اخي العزيز والغالي علي قلبي جزاك الله خير الجزاء ورزقك الفردوس الأعلى يارب العالمين تسلم ايدك الحلوين اتمنى لك التوفيق والسداد ومزيد من النجاح ❤❤❤❤❤
This is DOPE! But, I have no idea why you wouldn't build it on the ground and then install it. It would save on materials, time and be way safe and more comfortable.
Very well done, but wouldn't it have been easier to build the hexagons on the ground out of a lighter material and then lift them and attach them one by one?
🌟 Great master and friend ! 👋 Congratulations for this amazing result. 🥇 Precise planning and execution. Manual skills and a lot of muscle power are necessary. 👍🏻 ⭐️ Also a lot of praise to the client. ⭐️ Very nicely decorated. Modern and with great attention to detail ! 👍🏻 Thanks for your fantastic video ! 🚩
90% of this job could have been done down on the floor - much less effort, much better precision (he's done great job anyways but it's hard to imagine a more difficult way of achieving this result)
Super travail ! Ce serait plus simple et plus rapide pour toi d'assembler le maximum d'éléments au sol, puis de les fixer au plafond. Par la suite, tu n'auras que les derniers petites finitions (électricité et enduits) à réaliser au plafond. Bon courage mon ami. Salam from France
@@kapanadze6047 C'est possible, mais j'utilise toutes les méthodes possibles pour que le spectateur puisse prendre plusieurs idées et la méthode dont vous parlez j'ai appliqué dans la dernière vidéo. Vous pouvez le suivre et me donner votre avis
Congratulations on your skill! Better to wear safety glasses especially when drilling. Eyes are very valuable possessions. So you can continue to pursue this noble activity.
Came out nice, but way too many unnecessary steps. Could've pre-fabbed everything on the ground from the framing to the drywall...saved a lot of labor. And doesn't the taper use a mud pan?
Thanks for sharing this. craftsmanship is exceptional and the willing to share the knowledge is beyond ethics. I will be considering a similar design for a home theater ceiling to hide HDMI and speaker wiring that is otherwise impossible to run since my ceiling's beams run parallel to the screen and hence running wires are close to impossible (ground floor of a double story building.) I am considering to extend this by implementing star lights into the recessed pentagons. I will be filming the process and will share it at some point in most probably a :).
David here. I've been a Journeyman Electrician for many years. I've worked on a lot of small service calls, and rewired a lot of old houses and mobile homes. But, I've worked on a coal fired power plant, and a lot of big commercial jobs - schools, banks, warehouses, office buildings, a mall, fire stations, Army Reserve Center, etc... The point is, I've seen a lot of people in construction trades - red iron erection, metal studs, concrete, block and brick layers, plumbers, all kinds of roof work, ceiling grid and acoustical tile installers, painters, fire and security alarm specialist, elevator installers, window and door installers, duck work, air conditioning and heating, and a lot of sheet rock installers and mudders, etc... I say all that to say this. It's a rare thing for me to see such great craftmanship as the gentleman in this video. Great job.
Thank you, my friend David, for these kind words
😊
انت سبب في حبي لهذه المهنة . محترف ماشاء الله تبارك الله. لو اتحيت لي فرصة للعمل معك لن اتردد طائرة من المغرب. تحية خاصة لك يا محترف
شكرا صديقي
what a genius, i would thought you make the ceiling boxes first, save time and neck ace, and just wire in, but beautiful craftmanship
👍🏻
I think you are correct for this particular design but take a look at his other videos. Those may not be any easier to pre-assemble. ruclips.net/video/4LG4NiZrctY/видео.html
والله العظيم انت راجل فنان بمعني الكلمة يسلمو الايادى
تسلم أخي سمير
That ceiling looks amazing. Elegant and futuristic.
😘
الاجمل انو الابعاد كلها متساوية مما ادى الى هذا الشكل المحترف انت محترف
😘
Amazing workmanship. Thank you for sharing this project with us.
Thank you 🙏🏻
God bless you for your wonderful work
🙏🏻
ماشاء الله تبارك الله اللهم بارك. انت العسل يا عسل
Now, that's one hell of a talented brother. Bravo!
Thank you
yeah
I will like to learn from you@@Qossai
@@Hey_me 👍🏻
this is really cool. good creativity and love the usage of simple geometry and tools. fantastic work!
حبيت عملك هد باحترافية عالية جدا مهندس ومايطلعش تصميم مثل هد الله يوفقك
شكرا زينب🙆🏻♂️
From one trades man to another. Amazing job man. I hope the client appreciated that.
😘😘😘
ربي يسعدك ويرزقك من واسع فضله. صدقني تعلمت منك الجبسم
شكرا لك أخي نزار
خلايا نحل... وانت العسل يا قصي....すごい。.....اخوك الياباني.
تحياتي لك يا طيب 😘
اخوك من سوريا
@@احمدعلي-غ5و6خ ❤
بسم الله ماشاءالله عليك اخي العزيز والغالي علي قلبي جزاك الله خير الجزاء ورزقك الفردوس الأعلى يارب العالمين تسلم ايدك الحلوين اتمنى لك التوفيق والسداد ومزيد من النجاح ❤❤❤❤❤
@@MohamedBerdaoui-uc5io بارك الله بك أخي
@@Qossai وفيك يبارك الله اخي العزيز والغالي علي قلبي ❤️
@@MohamedBerdaoui-uc5io 😉☺️
So cool! and the coolest part is that it's made with a gypsum/drywall board!!
😘
عمل متقن و رائع ، و تقديمه بطريقة جيدة ،، شكرا لك وبارك الله في أعمالك.
😘
Preferiría pre ensamblar todo abajo y luego subir, agujerear y armar, creo que sería más rápido y fácil.
👍🏻
Your way, pre-assembled makes much more sense
ربي يعاونكم ويكثر خيركم كأنك اعطيتني صنارة وعلمتني أصيد❤️😘🎯
بالتوفيق أخي عبدالله
Espetáculo. Quando a gente acha que já viu tudo, vem esse artista e faz isso, Top top top.
😘😘😘
انا مو شاغل بهالمصلحة كتير بس عندي فكرة ممكن تساعدك كسرعة بالاداء هي انو يكون اضيب واحد مو قطع يعني بدون تقطيع بتقدر تعمل الشكل يلي بدك ياه وشكرا
شكرا لك
This is DOPE! But, I have no idea why you wouldn't build it on the ground and then install it. It would save on materials, time and be way safe and more comfortable.
Thus, the measurements are more accurate
@@Qossai really? How so? Just so you know, I’m not trolling, I’m legitimately trying to understand.
الله يبارك ، ماشاء الله لا قوة إلا بالله ، زادك الله خيرا و بركة
تسلم أخي عبدالله
I love how he reinforced the drywall with more aluminum. 👍🏾
Thank you
I love the way you are working God bless you
Thank you for praise
@@Qossai welcome
You can, basically, make the whole structure on a table, and then lift it... Good art anyway, but you made this more complex than it is
👍🏻
Try it before u leave the comment lolz !
@@bastianlaw tell me your email, I'll do something like this on my new house and send you a pic.
that's what i will do too [will save lots of energy and time], but still - good job!!!
مبدع كالعادة ماشاءالله تبارك الله
شكرا
Very well done, but wouldn't it have been easier to build the hexagons on the ground out of a lighter material and then lift them and attach them one by one?
❤
فنان بمعنى الكلمة
😘
Woooow It's quite amazing... Great talent 😍✌🏻❤️
😘
فن وأتقان بالعمل ربي يرزقك من أوسع أبواب الرزق
تسلم صديقي الفيصلي بارك الله بك
🌟 Great master and friend ! 👋
Congratulations for this amazing result. 🥇 Precise planning and execution.
Manual skills and a lot of muscle power are necessary. 👍🏻
⭐️ Also a lot of praise to the client. ⭐️ Very nicely decorated. Modern and with great attention to detail ! 👍🏻
Thanks for your fantastic video ! 🚩
Thank you honey❤
ما شاء الله . ربي ينورك و يحفظك و في الجنة يحشرك
شكرا مصطفى
my only question is how did he know where to cut when the line was on the outside of the intersection? Amazing work.
😘
You dint saw he draw the geometry line again before cutting?
@@bastianlaw 👇🏻 ruclips.net/video/lkzPFLRY-Ho/видео.html
90% of this job could have been done down on the floor - much less effort, much better precision (he's done great job anyways but it's hard to imagine a more difficult way of achieving this result)
@@thedukejp thank you
عاشت ايدك اسطه شغل كلش حلو ونظيف ومرتب والاحلى من كلشي الذوق متوقعت اصلا بالعراق هذا الشغل .... ١٠٠٠ ٪
أخي عمر أنا سوري و أقيم في لبنان
Cudeńko..
Wspaniała praca, gratulacje dla wykonawcy...
Dziękuję Ci bardzo
قصي العالمي، تحياتي ليك من مصر
تحياتي لك أخي عمر ولأم الدنيا مصر
Trabalho de excelência!!!
Um abraço de Portugal
😘
Super travail ! Ce serait plus simple et plus rapide pour toi d'assembler le maximum d'éléments au sol, puis de les fixer au plafond. Par la suite, tu n'auras que les derniers petites finitions (électricité et enduits) à réaliser au plafond. Bon courage mon ami. Salam from France
@@kapanadze6047 C'est possible, mais j'utilise toutes les méthodes possibles pour que le spectateur puisse prendre plusieurs idées et la méthode dont vous parlez j'ai appliqué dans la dernière vidéo. Vous pouvez le suivre et me donner votre avis
Good job bro! Hello from France. 😁
Merci😘
@@Qossai 😉😘
Congratulations on your skill! Better to wear safety glasses especially when drilling. Eyes are very valuable possessions. So you can continue to pursue this noble activity.
😘
سلام الله عليك اخي الفاضل الله عطيك صحة عمل رائع جدا أنت في أي مكان وشكرا
انا في لبنان
Precioso, trabajo espectacular. Te felicito!
gracias mi amigo
الله ينور عليك ويفتح عليك كل التقدير والاحترام عاشت ايدك 🎉🎉❤
شكرا اخي حمادة
He worked too much for this simple ceiling design.. you can make so simple in a different way.
Thank you
Came out nice, but way too many unnecessary steps. Could've pre-fabbed everything on the ground from the framing to the drywall...saved a lot of labor. And doesn't the taper use a mud pan?
I made something like that, but first, I made it on a workbench and then a set it on the ceiling. I worked less.
الله يحماك ..فنان ما شاء الله
😘
Wow !! Joli travail 🤩
Belle maîtrise du matériau, c'est très beau à voir, tant sur la réalisation que sur le résultat !!🤗
😊
Schöne Arbeit Gruß aus Deutschland 😉
danke Bruder
Wow! Que trabalho perfeito!
Obrigado😊
beau boulot avec des led de différentes couleurs sur chaque hexagone apres chacun ses gout
❤️😊
Thanks for sharing this. craftsmanship is exceptional and the willing to share the knowledge is beyond ethics. I will be considering a similar design for a home theater ceiling to hide HDMI and speaker wiring that is otherwise impossible to run since my ceiling's beams run parallel to the screen and hence running wires are close to impossible (ground floor of a double story building.) I am considering to extend this by implementing star lights into the recessed pentagons. I will be filming the process and will share it at some point in most probably a :).
I wish you good luck brother
Have you finished your project yet? I would like to see how it came out as I`m considering the same.
Para aqueles que não gostava de aulas de geometria......olha aonde vocês iriam usar....belo trabalho, parabéns
Muito obrigado❤️
Тут на одних саморезах можно разориться
❤
great job , i was liked this job even i was contractor for decor and finishing but these guys another level realty
شكرا عبد الفتاح ❤
Questo è un artista. Ottimo lavoro
grazie amico mio
Que trabajo y detalle tan más hermoso, genio de trabajador. Muy admirable su diseño 🤗🇺🇸
Gracias mi amigo 😊
mim tira uma duvida, você é brasileiro?, tou amando seus videos, quais são essas placas que você esta usando como molde?
Não, eu não sou brasileiro
ما شاء الله تبارك الله شغل ممتاز
تسلم حبيبي
عمل جميل والفكرة رائعة...ولكن هناك ضعف وخطر على سقوط السقف وذلك لعدم تقوية الحديد من الوسط خصوصا...
لا يا أخي بإذن الله هي قوية كفاية
What beautiful work. You are a true artist my friend.
Thank you bro
خت نظاره علي عيونك يامهندس قصي
إن شاء الله . شكرا لك زكي الدين❤️
A master in action.........breathtaking!
Thank you bro
Our culture is different and so does the way we do things. Let just appreciate the beautiful thing.
👍🏻
very nice work..from Malaysia
I love malaysia
this is so amazing.Dope Project man
😘
This amazing art - what thickness plaster boar ar you using?
Thank you
It's 12.5 mm
gorgeous ! what lighting did you put on? thank you !
T 5
Unbelievable job brother
Thank you bro
Amazing craftsmanship...!
Thank you bro
Beau travail ❤decor
Merci ❤️❤️❤️
جميل 👍 يفضل ان تلبس قناع لسلامة الرئه، الصحه اولا.... شكرأ على الفيديو الطيب
شكرا لك على النصيحة أخي
Nice job will planed looking good good for you.
😘
Excelente muy buen trabajo
Saludos cordiales desde Chile 🇨🇱✌️🇨🇱✌️🇨🇱✌️🇨🇱✌️🇨🇱
Gracias 😘
beautiful
smart work brother
Thank you bro
That is solid construction.
I did not under stand
amazing, u are very talented
Thank you
Very very so beautiful.
Thank you
excellent you are creative man
❤ thank you
Classy work, awesome idea, cool job performancе
Thank you honey^_^
قصي فنان الله يسعدك
تسلم حبيبي نزار
Amazing craftsmanship.... Mabrook !!!
Thank you
Thank you for this video.
Weldone guys
😘
BEAU TRAVAIL. BONJOUR DE FRANCE
❤
Ganz gut gemacht, sieht auch sehr schön aus, Bravo
😊
Nice work buddy
😘
Every diligent share👍👍👍
😘
you are a artist!!
😘
Parabéns pelo trabalho irmão e saudações aqui do Brazil!!! Estarei sempre acompanhando seu belíssimo trabalho!!! God bless you!!!
🙏🏻
مشاءالله تبارك الرحمن أبداع
😊
ماشاء الله لا قوة إلا بالله شغلك ممتاز والتصميم رائع جدا موفق بإذن الله
شكرا جزيلا أخي كريم❤
super sharp! nice work!
Thanks
Dios te siga BENDICIENDO con ese talento y la forma de ganarte el sustento diario ,no se de q pais eres .un saludo desde achuca Hidalgo mexico
Gracias mi hermano y mis saludos para ti. Soy un sirio que vive en el Líbano.
Alla yi''awik ou ye7fazak. sheghel 3azim.
Shokran
عاشت ايدك انت من لبنان ممكن اعرف لان انا عراقي وبالتوفيق واربي يرزقك ؟♥️
أنا سوري أقيم في لبنان
@@Qossai بالتوفيق حبيبي كل الود والتقدير
@@Omer_30 ❤
قمة الإبداع والرقي والذوق .. بهنيك
تسلم حبيبي❤
Wow so good job dear
😊
Excelente trabajo. Me podrían decir que tipo de luminaria utilizan en los hexágonos?
LED 3000k
Quand la main de l'homme c'est travailler ils réalisent des choses magnifique bravo!!!!
😘
لو قصيته على الارض وترفعه قطعه واحده وتركبه مع الغطاء النهائي يكون اسهل من العمل على السلم
👍🏻
Wow look amazing guys
Thank you
Sehr gute Arbeit 👍🏻
Danke