How to Fix PULSE OXIMETER MODULE | MAX30100/102

[@shashank6642]

"Thank you it worked successfully." I have saved lot of time, thank you so much for uploading the video. Keep uploading more videos.

[@EDISON_SCIENCE_CORNER]

😊

[@vijiljoy5125]

great bro ...!
i was searching for this vdo 🙃👍

[@EDISON_SCIENCE_CORNER]

Stay connected

[@awts_8116]

Hi, how did you connect the 4.7k resistor to the metal thing on the pcb? did you use any special type of wire

[@EDISON_SCIENCE_CORNER]

Copper wire

[@awts_8116]

@@EDISON_SCIENCE_CORNER thanks

[@awts_8116]

@@EDISON_SCIENCE_CORNER would this work for the black version of max30102?

[@EDISON_SCIENCE_CORNER]

@awts_8116 yes

[@eswarelectronics4205]

Good job want a full tutorial of how to make oxometer with result on display

[@EDISON_SCIENCE_CORNER]

Yes

[@Sieu_Joestar]

Do you have any solution for my GY-MAX30100 sensor sir?
its show "Initializing MAX30100..FAILED: I2C error
" when i use the example "tester" on the MAX30100.lib

[@EDISON_SCIENCE_CORNER]

This means your board is not detected. Either it is damaged or a bad connection

[@Sieu_Joestar]

@@EDISON_SCIENCE_CORNER and how to fix it sir?😭

[@sijahak6012]

Great tip I'm about to start a project ☺️

[@EDISON_SCIENCE_CORNER]

👌👌😽

[@ahmadzeghari3793]

hi friend you showed me that it can be a problem with the sensor producing i have a similar problem but with max30102 black can you help me solve the problem

[@EDISON_SCIENCE_CORNER]

Do the same

[@maulet3839]

thank you so much bro

[@EDISON_SCIENCE_CORNER]

Welcome 🥳

[@arjuns9392]

Can i use it without soldering

[@EDISON_SCIENCE_CORNER]

Yes

[@Electro_shastra]

Bro i did it but not get solution

[@EDISON_SCIENCE_CORNER]

Have you done the same like this

[@Electro_shastra]

@@EDISON_SCIENCE_CORNER
Bro problem solved
I have max30102 but i done the programing for max30100 thats why problem arrises
Thanks bro

[@EDISON_SCIENCE_CORNER]

Great

[@aaravinthan001]

​@@Electro_shastra iam also same problem how u resolve

[@andresemiliogonzalezpaez1472]

Hello! Does this fix work the same on the MAX30102?

[@EDISON_SCIENCE_CORNER]

Yes

[@greenatlas4031]

Sir i did it same but it not working

[@EDISON_SCIENCE_CORNER]

Try again

[@greenatlas4031]

Sir is this necessary to connect scl and sdl pin to on the led of max 30100

[@adrianhp6549]

I'm using a max30102 sensor, is it necessary to solder its pines to make it work?

[@EDISON_SCIENCE_CORNER]

Check it without modification. If not working please follow this hack

[@aaravinthan001]

Bro iam also using but when I connecting oximeter is not working

[@MINUZPLUZ]

Useful tips 👍

[@EDISON_SCIENCE_CORNER]

🐬

[@Channelnvs]

I've done the same but the led is not glowing, how to fix

[@EDISON_SCIENCE_CORNER]

Which library are you using

[@Channelnvs]

@@EDISON_SCIENCE_CORNER max30100_milan

[@EDISON_SCIENCE_CORNER]

That will not work use the max30100

[@Channelnvs]

@@EDISON_SCIENCE_CORNER but heart rate is showing

[@EDISON_SCIENCE_CORNER]

You cant get correct values without the led

[@shourjyajitmaiti2490]

Everything is fine but led is not glowing sometimes it is glowing when I connect USB and is stop glowing when I am putting my finger ...plzz help

[@EDISON_SCIENCE_CORNER]

Might be connection problem

[@Kamalamai2054]

led not glowing but shows the i2c adress

[@EDISON_SCIENCE_CORNER]

Then check the code

[@shourjyajitmaiti2490]

@@EDISON_SCIENCE_CORNER same slbro sometimes when I am putting the usb cable it is glowing ....did u solve it bro...plzz reply

[@atharvmh1861]

Code ?

[@EDISON_SCIENCE_CORNER]

Use example code

[@carlos516]

muy dificil, valí vrg

[@EDISON_SCIENCE_CORNER]

Means

[@ranscody353]

i need the code

[@EDISON_SCIENCE_CORNER]

Go to example

[@creatvitylight224]

Most of the time this type of error r frustrated..

[@EDISON_SCIENCE_CORNER]

🤗

[@jecentjosephki1969]

First

[@EDISON_SCIENCE_CORNER]

🌻

[@tokioshiguerra]

code code code lol

[@EDISON_SCIENCE_CORNER]

Just use the example code

[@akshayraj8699]

Max30102 press key problem

[@EDISON_SCIENCE_CORNER]

What?

[@akshayraj8699]

Code for blood oxygen
[ Serial.println(F("Attach sensor to finger with rubber band. Press any key to start conversion")); while (Serial.available() == 0) ; //wait until user presses a key Serial.read(); ]
I pressed all the available keys, but it is not converting.

[@akshayraj8699]

@@EDISON_SCIENCE_CORNER
have a another doubt,
if I connect MAX30100 with another sensor in arduino board, the heart rate goes zero and spo2 showing references values..clearly pulseoximeter is not working. But if I connect pulseoximeter with arduino, heart rate and spo2 values are showing and the pulseoximeter is working. Do you know what is the issue ? ( when I connect another sensor, max30100 is not working. )

[@EDISON_SCIENCE_CORNER]

Which device is that

[@akshayraj8699]

@@EDISON_SCIENCE_CORNER
PC + arduino uno r3 + Max30102.
Can u please give the solution for the press key issue?
,
I have a another issue with max30100, what I mentioned above, how can I solve ?