BEstDEAL베딜 네 다이슨에 확인해 봤더니 “Hello there, we are unable to provide information on how to repair internal componentry to unauthorized repairers.”라고 하는 걸 보니 고치는 법이 있기는 있는 것 같아요. 개인이 알아내기는 거의 불가능해 보입니다. twitter.com/askdyson/status/1098104930735439872?s=21
다이슨에 물어봤더니 리셋하는 법이 없다네요. I ask Dyson how to reset the faulty BMS of a V6 battery. Here is the answer from Dyson. “We do apologize, but the battery does not have a reset. If the battery does flash more than 12 times you would need a battery replacment.” Thank you Dyson -_- twitter.com/drkimfixnsolve/status/1098088999783026689?s=21
Here is the original email I sent to Dyson for your information. Any hint will be helpful. - Hi, Dyson. I purchased a Dyson V6 Motorhead 2016, and the original battery has been red light flashing since summer of 2018. Recently I tried to DIY the faulty battery and finally ended up the below picture. twitter.com/drkimfixnsolve/status/1103835577793818625?s=21 The battery output is about 20 V, but the terminal is about 15 V after the power is on. Clearly, the BMS is locked by some reasons. The lock is in hardware or software? Is there anyway I can reset the BMS through hardware or software? Otherwise I may try to put a replacement BMS from a third party, as your OEM BMS is not accessible to me at all. Please advise me. Best regards DrKimFixnSolve
Mr.Noono Ab : Thank you for watching my channel. Do you know which is thermistor? I couldn’t see any burn. Maybe internal burn? A hint is the circuit out voltage, which is 5 V lower than the battery out voltage about 20 V. Any advice?
Mr.Noono Ab: Thank you. No problem on our communication. We can even use the mighty google translator. I know thermistor will check the temperature, but where is it? That’s my question. I will keep digging out.
![HOW TO - Dyson V10 animal motor repair guide [strip down]](http://i.ytimg.com/vi/EUjumj-waSs/mqdefault.jpg)
최종적으로 수리에 성공했습니다. drkimfixnsolve.tistory.com/27 글을 참조해 주세요.
저도 같은 증상으로 여기저기 검색결과 레드불은 회로이상 이라네요
충전지 전압차나 이런저런문제로 회로 를 수리해야된다는데 성공하시는 영상보고싶네요
네, 좀 더 공부가 필요한 상황입니다. 저도 꼭 성공하고 싶습니다.
안타깝게도 bms 교체하셔야 합니다 이 문제로 2년전에 고쳐본다고 별짓 다해봤습니다
@@DrKimFixnSolve bms에서.위험.신호 감지 후 락을.걸어 버린것입니다 회로는 회생 불가입니다 고생하실까봐 댓글 남깁니다
BEstDEAL베딜 네 다이슨에 확인해 봤더니 “Hello there, we are unable to provide information on how to repair internal componentry to unauthorized repairers.”라고 하는 걸 보니 고치는 법이 있기는 있는 것 같아요. 개인이 알아내기는 거의 불가능해 보입니다. twitter.com/askdyson/status/1098104930735439872?s=21
@@ChannelXM 락걸린 pcb는 새배터리로 교체해도 사용불가인가요?
제 v8 다이슨은 배터리가 아예 불이 안들어오네요. 전압측정하니 24.6볼트 잘나오는데...
그럼 배터리 문제가 아니고.. 접속이나 모터 문제 아닌가요?
@@DrKimFixnSolve 모터에 가기전 단자에 대본거라서 모터문제는 아닌거같아요..락걸린듯 ㅠ
그럼 pcb교체하셔야 할 듯 하네요.
저도 납땜을 다시 했지만, 영 불이 안들어오네요 갑자기 왜 그런지...락 푸는 법? 혹시 아실까요?
다이슨 청소기 사는사람들 바보 밧데리 등등 아주 조악하게 조립 밧데리 분해 했다가 푸라스틱 조가리 잃어 버렸는데 as 문의 했더니 통째로 사라네요 그거 백원도 안할껀데
다이슨 배터리 정책은 약간 불합리한 것 같네요.
왜 뜯은건지^^
고치려고 그랬죠^^
다이슨에 물어봤더니 리셋하는 법이 없다네요. I ask Dyson how to reset the faulty BMS of a V6 battery. Here is the answer from Dyson. “We do apologize, but the battery does not have a reset. If the battery does flash more than 12 times you would need a battery replacment.” Thank you Dyson -_- twitter.com/drkimfixnsolve/status/1098088999783026689?s=21
돋보기김선생 Fix n Solve Typical answer from a company
Here is the original email I sent to Dyson for your information. Any hint will be helpful.
-
Hi, Dyson.
I purchased a Dyson V6 Motorhead 2016, and the original battery has been red light flashing since summer of 2018. Recently I tried to DIY the faulty battery and finally ended up the below picture.
twitter.com/drkimfixnsolve/status/1103835577793818625?s=21
The battery output is about 20 V, but the terminal is about 15 V after the power is on. Clearly, the BMS is locked by some reasons. The lock is in hardware or software? Is there anyway I can reset the BMS through hardware or software?
Otherwise I may try to put a replacement BMS from a third party, as your OEM BMS is not accessible to me at all.
Please advise me.
Best regards
DrKimFixnSolve
May be thermistor burn
Mr.Noono Ab : Thank you for watching my channel. Do you know which is thermistor? I couldn’t see any burn. Maybe internal burn? A hint is the circuit out voltage, which is 5 V lower than the battery out voltage about 20 V. Any advice?
Anyway I will keep working. Stay tuned.
Thermistor check battery temperature
(It back PCB).
Sorry ,I’m no good English language.
Mr.Noono Ab: Thank you. No problem on our communication. We can even use the mighty google translator. I know thermistor will check the temperature, but where is it? That’s my question. I will keep digging out.
Below circuit board