It's perfect and I like it except, you should have put the connections on the bottom, the inlet. Now all the hair, crap, crud has to go through the pump first and can get tangled in there before getting filtered. I have a solar panel sitting around but, I like yours. Where did you get it?
Zdravim, nemoze dojst k poskodeniu motora virivky ak ma dana filtracia vyssi vykon? Napr. chod na sucho? Nebolo by napr. vhodnejsie pripojit vstup a vystup do motora virivky cez Tkus a pripojit tak filtraciu? Vdaka
Hallo, du hast 2 ähnliche Videos, einmal verwendest du T-Stücke, einmal Winkel Stücke, welche Variante ist besser? Muss die Lay-Z-Spa Pumpe bei Verwendung der Winkel nicht das Wasser durch den Sandfilter ziehen, wenn nur diese eingeschalten ist oder verwendest du diese nur, wenn auch der Sandfilter aktiv ist?
Este koli zime odporucan urobit 3 ventily do H. Aby si mohol zavriet vonkajsi okruh a ohrievanie by neslo v zime cez solar. ENG: I recommend a little tune up in the form of three valves into H shape, to not let the water go out to solar system in the winter.
Hey, Great idea; looks like your spa is indoors too; so this is a great idea; one comment if you are using chlorine tablets they will react with the metal (its why all spa components tend to be plastic); also does the sand filter have any UV for sanitisation?
you can use chlorine because everything is plastic and if you don't want to use chlorine, try to watch this video with uvc lamp ruclips.net/video/TmSipLUOInM/видео.html
@@kukomio Hi Many thanks for your reply; however the couplings that the pipes push onto are brass it’s why I made that particular comment. Ps Thanks for the link to the UV Video I will watch it 🙏
dobry den zajima me vas solar u nas je pod nazvem slim 3000 ale u navodu pisou ze filtrace musí mit vykon 4m3 parametry jsou stejne jako ten vas ale filtrace prostar 2 ma vykon 2m3 za hod. nejsou nejake problémy s ohřevem jinak to je super dekuji za odpoved
Nice work. Any reason you're filtering the water after heating? I was looking to do this on my pool , running the 2 in line pumps , but with cold intake to pump /filter ( 2100 l/he flow rate) then out to the lay z spa pump/ heater ( 1300 l/hr flow rate) intake then out into the pool. Did you try this way around?
Thank you for your question. Yes i found my mistake and i changed it last year like this -cold water from pool (bottom connection) to : 1. sand filter pump 2. solar heater 3. lay-z spa pump/heater (when you press the electric heater, then hot water goes straight to lay-z spa /pool) 4. from pump/heater directly to pool (top connection)
@@kukomio thanks for your reply. That was how I intended to set it up. Did you have any flow rate issues Lay-z-spa 1325 litres /hour your filter pump 2000/ hr. Or pump height problems. I'm hoping it'll be ok like that on a 12ft swim!ming pool. Thanks again.
@@kukomio Thanks for your help. I have just set it up to test with a 20l storage box of water and it is working just as you said it would. Use either pump or both together. Thanks again.
hi, are you using a circulation pump from sand filtration or a pump from a heating unit? I would like both units to work independently of each other according to the timer setting on the sand filter, will it work?
Hi Radek, with this connection, both pumps work independently of each other, the water is filtered through sand filtration. I also use a timer for external filtration. When both pumps are running, there will be a fast water flow and faster filtration.
Hi ,I used a standart polypropylene elbow 3/4" BSP threads. Elbow POLY 3/4" Female x 3/4" Male www.malcleanse.co.uk/34-female-x-34-male-elbow-poly-bsp-8021201-p-981.html Elbow POLY 3/4" Female x 3/4" Female www.malcleanse.co.uk/34-female-elbow-poly-bsp-8019201-p-975.html
Zdravím, taktéto zapojenie nepoškodzuje motor vírviky ? Myslím napríklad kvôli tlaku, teda či pri vypnutom ohreve na motore vírivky nedochádza k pretlaku cez motor vírivky.
Myslím že nie .Používam to už viac ako rok a zatiaľ nebol žiaden problém .Keď vo vírivke dáte preč sivé sitko odkiaľ prichádza prefiltrovaná voda a dáte tam redukciu www.kdgarden.sk/vsuvka-redukovana-34-x-12-plast-products-217-16.aspx?productcathegory=324 tak pri zapnutých oboch čerpadlách to mate ako vodnú masážnu trysku. Ak budete robiť tuto variantu tak treba pripojiť externú filtráciu do spodného pripojenia ,nie do vrchného ako je vo videu.
filtrace ma prumer 32 vy tam mate trubky na vodu asi 1" nebo jaky prumer myslite když to je takhle zapojene je mozne pouzit i elektricky ohrev nebo pouzit druhé zapojeni jak mate pripojeni jenom filtrace a solr vradit za filtraci na privod do vířivky dekuji
dobry den u solaru supreme na ty vsuvky do panelu kam patri o-krouzek ta vsuvka ma na jedne strane takove vybrani tak jestli do toho nebo s druhé strany kde je plocha dekuji za odpoved
I don't use threading tape .I used Sealing cord, Henke Loctite 55 . plumbing4home.com/loctite-55-pipe-sealing-thread-cord-for-water-and-gas-leak-fix-size-150m/
U mňa zatiaľ všetko funguje správne, výhodou je to, že môžeš používať ktoré čerpadlo chceš, ako aj obe naraz. Voda je v každom prípade filtrovaná cez piesok, čo zvyšuje kvalitu a čistotu vody.
That's almost exactly what I have in mind for a DIY solar heater - using the egg's filter motor to drive the water through it.
It's perfect and I like it except, you should have put the connections on the bottom, the inlet. Now all the hair, crap, crud has to go through the pump first and can get tangled in there before getting filtered. I have a solar panel sitting around but, I like yours. Where did you get it?
Zdravim, nemoze dojst k poskodeniu motora virivky ak ma dana filtracia vyssi vykon? Napr. chod na sucho? Nebolo by napr. vhodnejsie pripojit vstup a vystup do motora virivky cez Tkus a pripojit tak filtraciu? Vdaka
Hallo, du hast 2 ähnliche Videos, einmal verwendest du T-Stücke, einmal Winkel Stücke, welche Variante ist besser? Muss die Lay-Z-Spa Pumpe bei Verwendung der Winkel nicht das Wasser durch den Sandfilter ziehen, wenn nur diese eingeschalten ist oder verwendest du diese nur, wenn auch der Sandfilter aktiv ist?
hello. Please tell me adapter list. I want to set up spa and inter sand filter. Please help me.
Does this work for lazy spa miami?
That was helpful!
Did this make a big improvement?
Este koli zime odporucan urobit 3 ventily do H. Aby si mohol zavriet vonkajsi okruh a ohrievanie by neslo v zime cez solar. ENG: I recommend a little tune up in the form of three valves into H shape, to not let the water go out to solar system in the winter.
Hey, Great idea; looks like your spa is indoors too; so this is a great idea; one comment if you are using chlorine tablets they will react with the metal (its why all spa components tend to be plastic); also does the sand filter have any UV for sanitisation?
you can use chlorine because everything is plastic and if you don't want to use chlorine, try to watch this video with uvc lamp ruclips.net/video/TmSipLUOInM/видео.html
@@kukomio Hi Many thanks for your reply; however the couplings that the pipes push onto are brass it’s why I made that particular comment. Ps Thanks for the link to the UV Video I will watch it 🙏
Zdravím, tak jak to běhalo? Našel jsem, že ta filtrace je určena do 35 stupnu vody, nepovolilo to někde při vetší teplotě?
dobry den zajima me vas solar u nas je pod nazvem slim 3000 ale u navodu pisou ze filtrace musí mit vykon 4m3 parametry jsou stejne jako ten vas ale filtrace prostar 2 ma vykon 2m3 za hod. nejsou nejake problémy s ohřevem jinak to je super dekuji za odpoved
Wo kann man Die t Stücke kaufen
dobry den ještě me zajima jaka je vzdalenost filtrace od vířivky a vzdalenost solaru od filtrace je s tim nejaky problém dekuji
Nice work. Any reason you're filtering the water after heating? I was looking to do this on my pool , running the 2 in line pumps , but with cold intake to pump /filter ( 2100 l/he flow rate) then out to the lay z spa pump/ heater ( 1300 l/hr flow rate) intake then out into the pool. Did you try this way around?
Thank you for your question.
Yes i found my mistake and i changed it last year like this
-cold water from pool (bottom connection) to :
1. sand filter pump
2. solar heater
3. lay-z spa pump/heater
(when you press the electric heater, then hot water goes straight to lay-z spa /pool)
4. from pump/heater directly to pool (top connection)
@@kukomio thanks for your reply. That was how I intended to set it up. Did you have any flow rate issues Lay-z-spa 1325 litres /hour your filter pump 2000/ hr. Or pump height problems. I'm hoping it'll be ok like that on a 12ft swim!ming pool. Thanks again.
I had no problems. Both pumps work perfectly.
Pump you can use which one you want or both together.
@@kukomio Thanks for your help. I have just set it up to test with a 20l storage box of water and it is working just as you said it would. Use either pump or both together. Thanks again.
@@kukomio thanks again all working with the pool as you said it would. 30°c pool on a 25° day cheers.
hi, are you using a circulation pump from sand filtration or a pump from a heating unit? I would like both units to work independently of each other according to the timer setting on the sand filter, will it work?
Hi Radek, with this connection, both pumps work independently of each other, the water is filtered through sand filtration. I also use a timer for external filtration. When both pumps are running, there will be a fast water flow and faster filtration.
@@kukomio thanks
I wonder what will happen when i connect 3000l/h sand pump into this system. Layz pump wil be damaged?
What type of fittings did you use for the external pipework, are they standard 3/4 BSP threads?
Hi ,I used a standart polypropylene elbow 3/4" BSP threads.
Elbow POLY 3/4" Female x 3/4" Male
www.malcleanse.co.uk/34-female-x-34-male-elbow-poly-bsp-8021201-p-981.html
Elbow POLY 3/4" Female x 3/4" Female
www.malcleanse.co.uk/34-female-elbow-poly-bsp-8019201-p-975.html
ještě jeden dotaz ten horni vyvod z vířivky je privod od solaru můžete detailne posat zapojeni dekuji
Zdravím, taktéto zapojenie nepoškodzuje motor vírviky ? Myslím napríklad kvôli tlaku, teda či pri vypnutom ohreve na motore vírivky nedochádza k pretlaku cez motor vírivky.
Myslím že nie .Používam to už viac ako rok a zatiaľ nebol žiaden problém .Keď vo vírivke dáte preč sivé sitko odkiaľ prichádza prefiltrovaná voda a dáte tam redukciu www.kdgarden.sk/vsuvka-redukovana-34-x-12-plast-products-217-16.aspx?productcathegory=324 tak pri zapnutých oboch čerpadlách to mate ako vodnú masážnu trysku. Ak budete robiť tuto variantu tak treba pripojiť externú filtráciu do spodného pripojenia ,nie do vrchného ako je vo videu.
filtrace ma prumer 32 vy tam mate trubky na vodu asi 1" nebo jaky prumer myslite když to je takhle zapojene je mozne pouzit i elektricky ohrev nebo pouzit druhé zapojeni jak mate pripojeni jenom filtrace a solr vradit za filtraci na privod do vířivky dekuji
dobry den u solaru supreme na ty vsuvky do panelu kam patri o-krouzek ta vsuvka ma na jedne strane takove vybrani tak jestli do toho nebo s druhé strany kde je plocha dekuji za odpoved
10 sec in i'm thinking this should be good, until see how he used the threading tape.
I don't use threading tape .I used Sealing cord, Henke Loctite 55 .
plumbing4home.com/loctite-55-pipe-sealing-thread-cord-for-water-and-gas-leak-fix-size-150m/
Zdravim zvýšenie tlaku za pomoci filtrácie nepoškodili časom hlavný motor vírivky?
U mňa zatiaľ všetko funguje správne, výhodou je to, že môžeš používať ktoré čerpadlo chceš, ako aj obe naraz. Voda je v každom prípade filtrovaná cez piesok, čo zvyšuje kvalitu a čistotu vody.
@@kukomio very good.
@@kukomio hi what size fittings did you use?
prosim kontakt na kukomio alarob001@gmail.com