Bushwhacker is a great product. I have a 46 and, if I were made of money, I'd get a 36 also. You can't go wrong with Griffiin. Great people and products.
Great performance from Bushwacker 36 on 5.56, 7.62x39 and 9mm. My 36 is a few months old and ready for a cleaning. The ratchet end cap is "stuck"so I oiled it with the hope that it frees-up.
I grease the booster with slip2k and wipe off, brisel brush, and re apply lightly every 200 rounds. Baffles/tube I brush and clean every 1k rounds. Works for me really well for many thousands of rounds now.
So far I’ve got the Optimus Gen1 and Bushwacker 46 gen2 the original Optimus end cap was a two piece i kinda like it more only cause the ratchet locking one tends to bind on me really bad makes it a bear to get it off.
Bought an Explorr 22T a couple months back. I see that the gen 2 Eco Flow baffles look a bit different depending on the caliber/host. Any information you can share on them as implemented in the Explorr?
@@ja0298 I totally get that. I definitely noticed it and was like "what are they doing with that music?" Figured it must be a bit of a joke but who knows!
I've looked through your videos a few times now, and I don't know if I overlooked it or not. But do you guys have a video of the qd blast shield gen 2 version? I've seen several of them where folks are looking at them on the work bench. But nothing with rounds going down range. It would be nice to see something.
Currently, we do not have a video like what you're requesting. Hopefully in the future we'll be able to provide a wider variety of product videos but at the moment, we do not have the staffing to do so. The QD Blast shield is not going to suppress the blast but more so direct it forward, for a more pleasant shooting environment for bystanders in the immediate vicinity.
I'm building an 8.6 bolt action rifle. I purchased a Bushwacker 36 that is presently in ATF Jail. My question, is Cherry Bomb Quickie Fast-Attach muzzle brake compatible with the Bushwacker 36?
@@BMorgan021953 we definitely don't offer any muzzle devices in that pitch. Your best bet would be a thread adapter that converts that pitch to something more common
Negative. We'd recommend an ultrasonic cleaner and using a wire brush on the thread interface and inside of the tube body. Only the baffles in the ultrasonic
Why do SO many channels feel the need to have some sort of background music. It's more like background noise and quite annoying when trying to listen to someone talk...Please Stop!
Bushwhacker is a great product. I have a 46 and, if I were made of money, I'd get a 36 also. You can't go wrong with Griffiin. Great people and products.
Great performance from Bushwacker 36 on 5.56, 7.62x39 and 9mm. My 36 is a few months old and ready for a cleaning. The ratchet end cap is "stuck"so I oiled it with the hope that it frees-up.
I grease the booster with slip2k and wipe off, brisel brush, and re apply lightly every 200 rounds. Baffles/tube I brush and clean every 1k rounds. Works for me really well for many thousands of rounds now.
"beverage entry tool" LOL
So far I’ve got the Optimus Gen1 and Bushwacker 46 gen2 the original Optimus end cap was a two piece i kinda like it more only cause the ratchet locking one tends to bind on me really bad makes it a bear to get it off.
What baffles are these? They dont look like the regular eco flow. There like a tri-clip design.
is the bushwhacker 36 safe to use on an 8.6 blackout with a 10” barrel?
Bought an Explorr 22T a couple months back. I see that the gen 2 Eco Flow baffles look a bit different depending on the caliber/host. Any information you can share on them as implemented in the Explorr?
Where’s the dual lok video? That thing is gonna be a hit! Looks like an air tool fitting
it looks like they have an introduction to it on their most previous bushwhacker 36 video, right at the very end
Music is a little loud
Music was a little annoying.
It made me laugh
@@jnichols959 cool. It was slightly distracting to me.
@@ja0298 I totally get that. I definitely noticed it and was like "what are they doing with that music?" Figured it must be a bit of a joke but who knows!
I've looked through your videos a few times now, and I don't know if I overlooked it or not. But do you guys have a video of the qd blast shield gen 2 version?
I've seen several of them where folks are looking at them on the work bench. But nothing with rounds going down range.
It would be nice to see something.
Currently, we do not have a video like what you're requesting. Hopefully in the future we'll be able to provide a wider variety of product videos but at the moment, we do not have the staffing to do so. The QD Blast shield is not going to suppress the blast but more so direct it forward, for a more pleasant shooting environment for bystanders in the immediate vicinity.
I'm building an 8.6 bolt action rifle. I purchased a Bushwacker 36 that is presently in ATF Jail.
My question, is Cherry Bomb Quickie Fast-Attach muzzle brake compatible with the Bushwacker 36?
not to my knowledge. Looks like it just works with the Thunder Chicken & Trash Panda from the literature I'm finding
@Griffin Armament do you have a muzzle brake for an 8.6 Blackout?
@@BMorgan021953 what's the barrel thread pitch?
@@GriffinArmamentOfficial M18x1.5 for a 16" Faxon 8.6 Blackout Barrel
@@BMorgan021953 we definitely don't offer any muzzle devices in that pitch. Your best bet would be a thread adapter that converts that pitch to something more common
Can you clean it with stainless steel media and Dawn soap?
Negative. We'd recommend an ultrasonic cleaner and using a wire brush on the thread interface and inside of the tube body. Only the baffles in the ultrasonic
@@GriffinArmamentOfficial haven't got mine yet but good to know ahead!
The bushwacker 36 is full
Auto rated?
Yes it is
Why do SO many channels feel the need to have some sort of background music. It's more like background noise and quite annoying when trying to listen to someone talk...Please Stop!