Suggestion to make reviews better: Kindly give more time to the owner to speak. kindly don't interrupt while he is answering the questions. keep questions precise.
aneeq is well educated boy with alot of knowledge kuddos to him for doing this much effort on 125cc bike asa ybr owner myself looking forward to trhis mods really love the effort
Turbo bikes are only good for strait roads ,,they are worst in corners ...worst !!!!!!!!!!!!!!!!!!!!!!!!!!!........... The main problem with turbo is their lag and some times when you give acceleration they dont pick up and after in the middle of corner they will pick speed and you will fall off the cliff easy so these bikes are not practical for roads only strait roads where you have to acceleration once upon gear change !!!!!!!!!!!!
Please PakWheels, It is a humble request to you lot to kindly let the person in review to speak rather than the interviewer constantly speaking and cutting the interviewee off. It makes user retention regarding the video less because it gets irritating bit by bit the more the interviewer cuts him off. JazakAllah.
I was waiting for this review and I was curious how he turbocharged a 125 cc engine. Much appreciated and good work rather than adding some over things
بہت اعلی 👏👏👏 Hats off to Aneeq... بالی ببل گم تو بار بار ٹوک کر سنیل منج کی کمی پوری کررہا ہے۔ اور بالی صاحب آپکو اتنا ہی نالج ہے تو آپ بھی ایک پروجیکٹ کرلیں۔ کم از کم جس نے جو بنایا ہے اسے Explain تو کرنے دیں ۔
Absolutely fantastic work! Hey, we're all eager to see your special helmet too. Why you put it in the back - it's such a cool part of your look! Keep up the great work, and remember to drive safe. Looking forward to see more enhancements 😊
I own a 2023 Honda CB150F SE and I have installed a 200cc Big Bore Kit on it and tuned the carb and stuff......I have also been researching for about a few months now to install a turbo on it and I was about to purchase a 660cc turbo. Then after thinking about it I realized that the exhaust pressure will not be sufficient enough to properly spin the turbo's turbine and the bigger problem is the engines stock Connecting Rod, it is meant for 17 HP at stock form, I think I have already damaged mine because the 200cc big bore kit has increased the power quite a bit.
Great work man! I remember when you used to create turbo and car sounds with your mouth in kips academy. Now you managed to put one on your bike. Heavy
Finally, someone did it. I had been dreaming up a CG 125 tutbo for yrars, but never found the time. Awesome effort. Please let Aneeq speak. He is the one who did it 😏
Well done bro keep it up or jo yaha p 125 wale kh rhe h k 115 jati h 120 jati h un k lye etna kahoo ga jitna kam uska weight h or shape us p koi bh bike chali jati h 115 p or ybr bht bhtar bike h cg se or cg is like genrator
excellent effort - going to 120km/h is very fast and good for a local modification !! going at 100km/h locally is also pretty good, fuel average is good
A nice effort. The tubing from turbo to carburettor is plastic and lengthy, which is expanding with boost and not giving enough psi at intake. Intercooler in this side facing setting is useless. The best is to remove Intercooler, add steel bend pipes, and shorten the length. It will give more response.
As you two being engineers, lots of what you are talking about is coming from "what I have heard" knowledge. You haven't talked about how much boost is made in any unit, and at how much RPM. Secondly, despite knowing very little about engines and turbos, the host is interrupting again and again to fit his not-so-accurate knowledge. Thirdly, lots and lots of technical mistakes, e.g. how did you index Jet size while it being custom? Fourth, presenter interrupts when the guy actually starts to give some useful information. However, this is some daring work! 10/10 for the guy who dared to do such work. I am myself a project engineer and working with pakistani fabricators is not an easy task. When some fabricator is expert in what he actually does, he will not understand drawings or numbers, and vice versa.
it needs engine head with stock oil cooler and small turbo and it will be perfect also electric turbo are available too it will decrease the complexity
Well nice work he did it practically to install turbo which no body add But by my way waste of money he can swap engine by 250 or 300cc doch I swap it in Ravi piaggio my bike touch 150kmh easily and back fire also like turbo It cost me 150k brand new engine tyres exust and pipe
Aoa im new here kindly guide kerdain ka agar kise ka pas ache bike how or wo apko apna review da daa to wo ap ko approach kaisa kara ga kindly guide krdeya karan acha sa❤❤
Suggestion to make reviews better:
Kindly give more time to the owner to speak.
kindly don't interrupt while he is answering the questions.
keep questions precise.
Reviewer talks a lot with less worthy talk, which becomes annoying for the viewers
Exactly.. what I thought of. He interrupted so many times. Should have discussed earlier before recording.
aneeq is well educated boy with alot of knowledge kuddos to him for doing this much effort on 125cc bike asa ybr owner myself looking forward to trhis mods really love the effort
❤😊
Turbo bikes are only good for strait roads ,,they are worst in corners ...worst !!!!!!!!!!!!!!!!!!!!!!!!!!!........... The main problem with turbo is their lag and some times when you give acceleration they dont pick up and after in the middle of corner they will pick speed and you will fall off the cliff easy so these bikes are not practical for roads only strait roads where you have to acceleration once upon gear change !!!!!!!!!!!!
Thanks man ❤
@@atifrashid1421bro its a project bike, daily nai chlta
Pakwheels: we're never gonna let the other guy speak 👏🏽
Hahahahaha.. same i felt..
Suneel munj k germs sb ko lag gaye hain 😂
Extremely annoying and insecure host
Pakwheels kay aagay koi bol sakta hai kya ? 😂🤣
I've seen some crazy sh*t in my life, but this is just unbelievable, a hack and slash turbo on a 125cc. Kudos to the young man for his ingenuity!
I wouldn't mind having this bike with just the cosmetic modifications. The color, the stance and longer swing arms makes it look very sporty.
Please PakWheels, It is a humble request to you lot to kindly let the person in review to speak rather than the interviewer constantly speaking and cutting the interviewee off. It makes user retention regarding the video less because it gets irritating bit by bit the more the interviewer cuts him off. JazakAllah.
I was waiting for this review and I was curious how he turbocharged a 125 cc engine. Much appreciated and good work rather than adding some over things
Thank you Pakwheels 🤝
Sir HUGE RESPECT ❤
You seems such a nice guy and you put an amazing effort
ALLAH kamyab kry bhai ko🫡
@@FRANKY854❤❤
@@masemali5738❤❤
🙌
بہت اعلی 👏👏👏
Hats off to Aneeq...
بالی ببل گم تو بار بار ٹوک کر سنیل منج کی کمی پوری کررہا ہے۔ اور بالی صاحب آپکو اتنا ہی نالج ہے تو آپ بھی ایک پروجیکٹ کرلیں۔ کم از کم جس نے جو بنایا ہے اسے Explain تو کرنے دیں ۔
Keep it up Boy, mujhay as a Mechanical Engineer ye review dekh kr maza agaya! Good work Pakwheels for bringing us this unique review.
Thanks man ❤️
Acha yeah batana zarori Tha ky ap mechanical engineer ho😂😂
MashaAllah MashaAllah hats to our boys Allah bless you always
Allah subhanatalla apko khushiyaan hi khushyian ata karay ameen
Ameen ❤
Absolutely fantastic work! Hey, we're all eager to see your special helmet too. Why you put it in the back - it's such a cool part of your look!
Keep up the great work, and remember to drive safe. Looking forward to see more enhancements 😊
❤❤
I own a 2023 Honda CB150F SE and I have installed a 200cc Big Bore Kit on it and tuned the carb and stuff......I have also been researching for about a few months now to install a turbo on it and I was about to purchase a 660cc turbo.
Then after thinking about it I realized that the exhaust pressure will not be sufficient enough to properly spin the turbo's turbine and the bigger problem is the engines stock Connecting Rod, it is meant for 17 HP at stock form, I think I have already damaged mine because the 200cc big bore kit has increased the power quite a bit.
Yaar Kamal Kiya hai is Bhai nay. Allaha pak is ko apnay maqsad may kamyab karay
Great work man! I remember when you used to create turbo and car sounds with your mouth in kips academy. Now you managed to put one on your bike. Heavy
Very talented boy May Allah bless him and Allah succeed him in his plan
Finally, someone did it. I had been dreaming up a CG 125 tutbo for yrars, but never found the time. Awesome effort.
Please let Aneeq speak. He is the one who did it 😏
❤️🫶
Is it possible to turbocharge a cg125
@@gamer-zd6cq not possible i think because ybr have SOHC engine With higher compression Ratio then cg.
@@shahrukhshaikh5558 whats sohc
Aneeq is doing very well may you get successful a lots of prayers for you ❤
Thanks man ❤
I do not like ybr but this one is lit. Especially the colour combination.
AP wan tow faaayy Waly hogy 😅
@@hamza-or3gb ap k ghar waly dant rahe thy apko k aisa comment kro? Wan tow fave wali baat ni ha. Shape ni pasaand.
@@zaidtariq. Isy achi modern looks wali bike Pakistan m locally NH milti .
Good Project modification in ybr 125 ❤❤❤
Well done bro keep it up or jo yaha p 125 wale kh rhe h k 115 jati h 120 jati h un k lye etna kahoo ga jitna kam uska weight h or shape us p koi bh bike chali jati h 115 p or ybr bht bhtar bike h cg se or cg is like genrator
❤
Variable control device is easy to make. Accelerator turn will be the input. To control the rpm of the motor
excellent effort - going to 120km/h is very fast and good for a local modification !! going at 100km/h locally is also pretty good, fuel average is good
impressive man, no words, may you progress more,
ameen.
❤
Mashallah aneeq you deserve this recognition 🤝
Keep it up bro.
Hamesha unique kam krte ho
Such a nice guy
Best YBR in town no doubt
❤
Great work boy. More power to you
A nice effort.
The tubing from turbo to carburettor is plastic and lengthy, which is expanding with boost and not giving enough psi at intake.
Intercooler in this side facing setting is useless.
The best is to remove Intercooler, add steel bend pipes, and shorten the length. It will give more response.
Keep it up brother and wish you best of luck for your future projects
Ok 😂❤
zabardast experiment kr dia hy bhai ne, chaaa gy hnnn
Weldone Modification keep it up.
Best host and photographer ❤
Good efforts , keep it up.
We need to promote the new talent
Best of luck for ur future.
So Beautiful, So Elegent and just looking like a wow 🎉❤🫣
Acknowledged
Great work dear
Plus the intake is a drain pipe😅
Love it
very nice acha project ha good bro
Aneeq bhai thank you for takin my name❤
Awesome work! Considering the guy is not from a well-off background!
Kamaal, yarr. Maza agya dekh k.
I was expecting this review by Haris Awan on Horsepower Pakistan but unfortunately that channel got hacked! 😢
Udhr b he review checkout
@@FRANKY854 brother unka channel hack ho chuka owner ab koi or hy 😕
Haris gyb hai bhot time ka
@@wasich8936 bhai channel hack ho chuka is liye unho ny 2nd channel bnya Horsepower 2.0
@@Zain_Choudaryhorsepower 2.0 haris ka naya channel hai wahan hai review
As you two being engineers, lots of what you are talking about is coming from "what I have heard" knowledge. You haven't talked about how much boost is made in any unit, and at how much RPM. Secondly, despite knowing very little about engines and turbos, the host is interrupting again and again to fit his not-so-accurate knowledge. Thirdly, lots and lots of technical mistakes, e.g. how did you index Jet size while it being custom? Fourth, presenter interrupts when the guy actually starts to give some useful information.
However, this is some daring work! 10/10 for the guy who dared to do such work. I am myself a project engineer and working with pakistani fabricators is not an easy task. When some fabricator is expert in what he actually does, he will not understand drawings or numbers, and vice versa.
it needs engine head with stock oil cooler and small turbo and it will be perfect also electric turbo are available too it will decrease the complexity
What a beautiful machine, cant wait when he ll be touching 150km/h
Very Nice effort
Top speed only 120kmph even after the turbocharger? That's the normal speed for YBR, what was the purpose of the turbocharger?
Bro it can go up to 140 but it requires more 40…50k for modifications
High lift cam
Efi and lots of other things
turbocharger is for acceleration, not top speed. Unless you do some fiddling with pressures.
Welldone keep it up
Good work mate, keep it up.
1/1 Aneeq Mello😍🔥
Well nice work he did it practically to install turbo which no body add
But by my way waste of money he can swap engine by 250 or 300cc doch
I swap it in Ravi piaggio my bike touch 150kmh easily and back fire also like turbo
It cost me 150k brand new engine tyres exust and pipe
cha gya mera bhai 💯❤️
Awww ❤
i think is engine ko 250cc pe alter krlety to bhtr result deta turbo
I love Yamaha Ybr.
Ab is talent ki qadr kr ly koi toh Pakistan ma automotive side py boht kuch ho skta ha
😊😊😊Nice:My favorit Modification👍👍
Good luck boy 👍
I had a ybr 2022 model I used to touch 125kmph, no need for modification
Zabardus appreciated brother
Itne kharche k bad b 120 or honda 125 stock hi is se upper jata ha 😂😂😂😂😂 no hate btw nice effort by this man ❤❤❤❤❤❤❤
Aneeq aka King 👑
Okkk 😂❤
Try to speak less, let the guest talk more and tells his experience.. 🙏
Really appreciated ❤
Review on Super star 200cc💥💥
good effort ❤
❤ good efforts,🎉
Bhot alaw ❤
Finally bro's on Pakwheels😭😂
Appreciated
Honestly I hate ybr,dont know why
Buttttt I start loving this one only❤
Good effort boy.keep it up.
Lot of wishes for you.❤
❤
*it's time to connect LAMBDA Kit, best option for low budget experience*
Good effort but I think an electric turbo with efi gives more better results with much less effort..
Pakwheels let the person speak
Boht kamal yr🔥♥️♥️
This is really good i hope some one will help you in this project and please make yt channel so other can get idea
Inshallah
Spark plugs r uski wire knsi use ki hui?
ماشاءاللہ ❤❤
Mashallah 🎉🎉🎉
Not understand about YBR 125. Anybody explain about price
I've been trying to do this! Everyone refused to work on it and I couldn't find the parts.
Best vbr in town
Next project, water driven engine
Inshallah
@@aneeq_revs Allah kamyab kre. Qk ab Pakistan me raha kuch ni. Sirf be eemani reh gai hy
Nice buddy
Commendable
Keep it up ❤❤❤
What if we add turbo charger on road master 200 ?
Turbo ki oil circulation kesi ki ? Or water circulation
Bhai is sa behtar tha k rev limiter off karwalatay or pz30 install kar deta wasa he 120 pa sakoon sa jati
Awesome
Top speed?
To jo latest model aaa rahay hain kaya woh japanese nahi hain???
bike start kb hoti hia ya abhi start nai hoti
❤️❤️❤️
Bhi wash besan wala pipe lagaya waa h geoo bhiiiii 😂😂😂😂❤❤❤❤❤❤❤😘😘😘😘😘😘😘😘😘
It is great but Still, it can't beat the Kawasaki GTO 125😎
Yar chala ke bhi dikhado Aneeq bhai
Aoa im new here kindly guide kerdain ka agar kise ka pas ache bike how or wo apko apna review da daa to wo ap ko approach kaisa kara ga kindly guide krdeya karan acha sa❤❤
Pakwheels please do us a favour remove this employee forever and you will increase views he is so
disrespecting
I dont think it is making any boost if there is boost then the that inflatable pipe will be blown.
👍👍
Agr ya bhai engine replace kar data turbo engine ka sath to behtar results mil sakta tha