Stanley Μηχανικό Φαλτσοπρίονο (Συναρμολόγηση) / Stanley Mechanical Miter Saw 1-20-800 (Assembly)
HTML-код
- Опубликовано: 13 окт 2024
- Λήψη-Μοντάζ: Σοφουλάκη Ειρήνη. Η λήψη έγινε στο Ρέθυμνο, Κρήτης. 27 Μαϊου 2017. [ Πωλείται στο κατάστημα Electrotools, Γ. Πασαλίδη 56, Καλαμαριά - Θεσσαλονίκη. Τηλ. 2310 451431. www.electrotoo... Email: info@electrotools.gr ]
Camera work-montage: Irene Sofoulaki. Filmed on location: Rethymno City, Crete, Greece. May 27, 2017. [ Sold by ELECTROTOOLS, 56 G. Pasalidi str., Kalamaria, Thessaloniki, Greece. Tel. 2310 451431. www.electrotoo...
Email: info@electrotools.gr ]
Thank you ! !
Thanks for watching! You're welcome!
Precio y en colombia dd la consigo
Very interesting. Thanks for the detailed build instructions. How do you find the accuracy of the device when it comes to cutting picture frames? (Πολύ ενδιαφέρον. Ευχαριστώ για τις λεπτομερείς οδηγίες κατασκευής. Πώς βρίσκετε την ακρίβεια της συσκευής όταν πρόκειται να κόψετε πλαίσια εικόνων;)
Thank you for your comment! The Stanley saw is very accurate and it makes smooth, clean fine cuts. BUT you need to fasten the saw tightly, before you start cutting. You can either screw it or clamp it to your work bench. And you ALSO need to lock your wood before cutting it. The two moveable yellow cam locks are very handy, and I also use two extra clamps to lock the wood. After that, the blade works beautifully from 45 to 90 degrees! I'm very happy with it!
Thanks for your quick reply and feedback. It sounds like I should get one, too. Happy sawing!
Ι highly recommend it! It's cheaper than an electric miter saw, portable, doesn't depend on electric power, and it cuts beautifully! Greetings!
Thank you for the step by step assembly. I notice that there were 2 black circles with screws on it where do those go?
Four (4) metal silver posts hold the blade. Two FRONT silver posts and two REAR silver posts. The two round black pieces are blade stops screws. They adjust the depth of the cuts, they adjust how low the blade can go. You place one at the bottom of the FRONT posts. You place the other one at the bottom of the REAR posts...at opposite ends and diagonally. Send me an email address and I can mail you a photo of them, if you don't understand. It's kind of hard to explain if you can't see it!
Kalispera Irene, have a nice midsummer, seems you have again some project to do , good luck!
greetings Anna from Finland
Kalispera Anna! It's summer in Rethymno...yes, I'm keeping busy with woodworking projects....and filming culture! Lots of cultural events in Rethymno this summer! Stay tuned! Greetings from sunny Rethymno!
Ωραίο review. Μπορώ να ρωτήσω, η βαση και τα πόδια του είναι μέταλλο ή πλαστικό;
Σε ευχαριστώ για το σχόλιο! Τα μαύρα πόδια του είναι από σκληρό πλαστικό. Η ασημί βάση είναι από μέταλλο. Στα πόδια υπάρχουν ειδικές τρύπες για την τοποθέτηση βιδών (εάν επιθυμείς να το έχεις σταθερά βιδωμένο σε πάγκο εργασίας). Ολο το πριόνι είναι εξαιρετικής ποιότητας (δυνατή κατασκευή), δεν μου έχει παρουσιάσει σπάσιμο ή κάποιο άλλο πρόβλημα έως τώρα. Γενικά ότι εργαλείο Stanley έχω χρησιμοποιήσει, είναι άριστης ποιότητας.
@@IRENECRETE Ευχαριστώ για την γρήγορη απάντηση.
Hi, is there a similar tool for cutting lamellar boards, lamellar panels ?
I'm not sure if there is a similar tool for cutting lamellar boards/panels. I would use a circular saw for lamellar boards.
@@IRENECRETE Thank you for answering me, I didn't find anything either, if you happen to find any hand tools to cut the lamellar panels let me know, for now the circular saw is the only solution. A greeting. Hello.
Hello there! I sure will let you know if I find any hand tools, but I think the circular saw is the best possible solution for now. Greetings!
@@IRENECRETE Hello, perfect, thank you for your availability, very kind.
What is the size of the biggest log you can practically and comfortably cut in it?
The maximum height for the blade is: 115mm. A log is round. So, I guess, it can cut any log with a diameter up to 115mm. Anything larger than that won't probably fit.
Made of metal or plastic??
The black legs are made of hard plastic (top quality). All the rest is made of metal (top quality).
Can you do a demo cut of 90 degrees then to 45, and the to 90 again and tell us about the accuracy of the cuts ?
I'm out of town on a business trip and can't make a demo. But I have tried the saw in all angles (90 / 75 / 60 / 45) cutting different planks of wood, and the cuts are accurate. As I have already mentioned in a previous comment, the important thing to remember before cutting wood is 1. Screw/clamp the saw to your workbench 2. Lock the wood securely.
Cool, thanks for the info.
It would be super if you upload a video with the saw in action.
Where do the two pieces at the middle bottom of the screen at 7:46 go?
Four (4) metal silver posts hold the blade. Two FRONT silver posts and two REAR silver posts. The two round black pieces are blade stops screws. They adjust the depth of the cuts, they adjust how low the blade can go. You place one at the bottom of the FRONT posts. You place the other one at the bottom of the REAR posts...at opposite ends and diagonally. Send me an email address and I can mail you a photo of them, if you don't understand. It's kind of hard to explain if you can't see it!
I understand now. Thank you!
The best silent assembly just get now video start talking....
Thank you for your comment! Sometimes silence speaks a thousand words. I'd rather let my camera lens speak for itself...
@@IRENECRETE
Please understand what should be done silently and should be said abt it.
The point of your video is to educate,try educating silently.
Sorry to disappoint you! The point of my video is not to educate anyone. I'm not into educating people. If you're looking for 'educating' videos, perhaps this one is not for you! Have a good weekend! :)