Bring back the shop talk. Would be cool to hear how everybody is liking all their gear and sled mods to give us some input on making our own gear and mod purchases. Like the updates too on what’s all planned for the season.
Watching this after my 2 week rotation in McClean Lake., Sk. Just took off from the airstrip, and in the air omw to Stony Rapids Sk. Gonna relocate my air sensor and delete my headlight on mine. Cheers mate.
Ever thought of keeping the headlights and getting rid of the intakes? I understand it’s so you can use it all still but I would love to do a intake mod and just trim the intake vents off they don’t meet up like they used to 😢
Did a headlight delete to my skidoo expert after I smashed it into a tree and took out the headlights. added a rigid head light and ended up with about 3 times the glove box space once I took out the headlights and carved into that area. Tons of storage now.
Bars are definitely a need at this point for ya...have a 15 m8000 and just did the adjustable post delete and low bar with rsi risers ...much less slop and bs!! Super easy to do. But great video!! 🤘🤘 Keep it up
Could you just ditch the KN filter all together and use the frogzskin's over both intake holes? Especially since my 1100 turbo has a paper filter right before the turbo and I don't ride in the mountains?
Curious to know if you need a different regulator, a dc regulator or something? I tried installed LED headlights and with the AC power they flickered when revving. Also Do you need the air filter? Could you not just install the frogskinz on both holes?
Great video👍 i did the intake on my M1100 turbo a few weekends ago. Picked up the same snow pod you have i think. I cut the hood shroud in between the stock intake holes and ran it in front of the center of the bars. Kinda blocks my gauge cluster but it's normally coved by snow anyways and i really like being able to hear the turbo. I was going to go out the side of the hood but i was too afraid it would get ripped off. Just waiting till i can afford to pick up my new track then try and install it myself. Maybe a vid with pointers and tricks on how to swap a track out is in the works?😝
@@syxxes yeah that's the part that scares me haha. Not much to get the skid out but the drivers are the where the fun begins! I'll let you know how it goes anyways. Thanks for &the reply👍
I’ve been looking at a 2014 arctic cat sno pro fx7000 *Mint condition- Turn key and go *Fitted with push turbo- factory installed setup *New belt/plugs, fresh oil and filter, full tank of supreme, comes with 2 tunnel bags *Power commander fuel management system, POD 300 gauge, ice-scratchers, studded track, head shim, 550cc injectors, boost controller, clutching, APP head stud kit, AEM boost gauge Serious inquiries ONLY!!! Not interested in trades $7950.00 Canadian please tell me what I should know about this or if I should avoid it, pros and cons, and I wonder why no one bought it yet it’s been posted almost a month, I’m seeing plenty of other sleds sell quick, is it the price? Weight? Too fast? Thanks🤘
I’ve had issues in the past with the factory intake covers ripping and creating spots for air to get into the intake on my xf .. with your knowledge of these sleds do you think just putting a frog skin like you put on the right intake run but on both sides would work good enough as intake vents ? Or would it restrict too much air-flow ? (Hope you can make some sense of what I just said lol)
I've seen it done that way. The problem just comes when you start getting into the deep snow and the vents getting covered, but if you don't do mountain riding it might work out.
Hello from Michigan! Hope all is swell! Why are the hood vent screens for a 02 zr 600 efi cc so hard to find new? You’d think some dealers got a pile but nope all used and fked up! Have to make my own!
Hi Matt! Is it possible to run both the oem headlight and a led light off the connector at the same time you reckon?
4 года назад+1
I don't know exactly what bar that is or how much current it draws, it looks like a generic 7inch 18w led bar and that is totaly fine to run with the standard light. One thing you could do is upgrade the halogen to a Good LED bulb. As far as I can find Arctic cat uses a H4 bulb, there are some really good H4 LEDs out there :)
Did you leave the headlights AC power? I had to convert my headlights to DC using the rectifier (I have E-start) to keep my LEDs from flickering like crazy.
@@syxxes ok. i have 2 small led lights mounted on mine. have cut the original top to lower it a bit. and a small led bar on my bar. think i mounted a 100w resistor on it.
It’s the adjustable handlebars. There’s a delete kit you can do that allows you to cut the shaft, install a new bracket and put fixed risers on and it eliminates about 99% of the slop.
Making sure people know "how cool we are" is of the upmost importance!
Nice job!!
Thanks bro!
You won't let whitie go. I look forward to see it in videos as your primary machine 6 years from now.
Bring back the shop talk. Would be cool to hear how everybody is liking all their gear and sled mods to give us some input on making our own gear and mod purchases. Like the updates too on what’s all planned for the season.
We should start a go fund me so Matt can buy a new sled
Watching this after my 2 week rotation in McClean Lake., Sk. Just took off from the airstrip, and in the air omw to Stony Rapids Sk. Gonna relocate my air sensor and delete my headlight on mine. Cheers mate.
Ever thought of keeping the headlights and getting rid of the intakes? I understand it’s so you can use it all still but I would love to do a intake mod and just trim the intake vents off they don’t meet up like they used to 😢
Did a headlight delete to my skidoo expert after I smashed it into a tree and took out the headlights. added a rigid head light and ended up with about 3 times the glove box space once I took out the headlights and carved into that area. Tons of storage now.
What a perfect time to do it!
Looks good boss. Might try this set up on my m8000. Can’t wait for some new content this winter from you guys!
Bars are definitely a need at this point for ya...have a 15 m8000 and just did the adjustable post delete and low bar with rsi risers ...much less slop and bs!! Super easy to do. But great video!! 🤘🤘 Keep it up
I will do that, but not until it needs to be done.
Could you just ditch the KN filter all together and use the frogzskin's over both intake holes? Especially since my 1100 turbo has a paper filter right before the turbo and I don't ride in the mountains?
About damn time Matt... been watching old vids for couple weeks now
Been busy. Sorry 🤣
@@syxxes it’s ok the snow will be here soon.. another 3-4 weeks for me
Curious to know if you need a different regulator, a dc regulator or something? I tried installed LED headlights and with the AC power they flickered when revving. Also Do you need the air filter? Could you not just install the frogskinz on both holes?
Don't you need a resistor since the lights that draw alot more power is gone?
I'm doing this to mine and i'm wondering can i put frogskinz on both holes?
I have the same question!
Yea im wondering why not just frogskin both holes and even add a third if needed?
@@bulkleyoutdoorsi might frog skin both and keep the headlights
I have 2014 M8000 and mounted a ledlight because i have done the deletekit but my ledlightbrake after 10 seconds WHY? Great program👍
Honest question here Howcome you didn’t run a filter on both side of the air intake or is the frog skin also aft as a filter for air intake as well?
Did you go with a flood light or spot light?
Awesome job!!!
Thanks!!
Do you have a video on the Cvthec clutch yet I have the same sled and I'm in desperate need of new clutch
Will this work on an el tigre 600 of same body style
What kinda led light is that? I tried to use a small 12 -24v DC light and it burned out. Do you have an ac light?
Can you put a light bar on and still keep your headlight?
Great video👍 i did the intake on my M1100 turbo a few weekends ago. Picked up the same snow pod you have i think. I cut the hood shroud in between the stock intake holes and ran it in front of the center of the bars. Kinda blocks my gauge cluster but it's normally coved by snow anyways and i really like being able to hear the turbo. I was going to go out the side of the hood but i was too afraid it would get ripped off.
Just waiting till i can afford to pick up my new track then try and install it myself. Maybe a vid with pointers and tricks on how to swap a track out is in the works?😝
Tracks are still pretty easy on those! Just remember how your chain case goes together is the trick!
@@syxxes yeah that's the part that scares me haha. Not much to get the skid out but the drivers are the where the fun begins! I'll let you know how it goes anyways. Thanks for &the reply👍
What is the weight loss?
You'll get a few pounds out of it. I'd get 5-6.
I’ve been looking at a 2014 arctic cat sno pro fx7000 *Mint condition- Turn key and go
*Fitted with push turbo- factory installed setup
*New belt/plugs, fresh oil and filter, full tank of supreme, comes with 2 tunnel bags
*Power commander fuel management system, POD 300 gauge, ice-scratchers, studded track, head shim, 550cc injectors, boost controller, clutching, APP head stud kit, AEM boost gauge
Serious inquiries ONLY!!! Not interested in trades
$7950.00 Canadian please tell me what I should know about this or if I should avoid it, pros and cons, and I wonder why no one bought it yet it’s been posted almost a month, I’m seeing plenty of other sleds sell quick, is it the price? Weight? Too fast? Thanks🤘
Nice work Matt
Thanks! Cheers!
So why not just put frogskinz on both pods?
When the snow gets deep it piles up over the hood, and you want some breathing happening 🤙
Been looking at adding the 16 spindles. Did you just slap the spindles on your stock a-arms or did you change up the arms as well?
The 2016+ spindles don't fit the 2015 A-arms. What I did there is all in this video: ruclips.net/video/OlkUG90m9bo/видео.html
I’ve had issues in the past with the factory intake covers ripping and creating spots for air to get into the intake on my xf .. with your knowledge of these sleds do you think just putting a frog skin like you put on the right intake run but on both sides would work good enough as intake vents ? Or would it restrict too much air-flow ? (Hope you can make some sense of what I just said lol)
I've seen it done that way. The problem just comes when you start getting into the deep snow and the vents getting covered, but if you don't do mountain riding it might work out.
how’s does ur sled pull over so easy mines hard as hell
What light are you using?
Hello from Michigan! Hope all is swell!
Why are the hood vent screens for a 02 zr 600 efi cc so hard to find new? You’d think some dealers got a pile but nope all used and fked up! Have to make my own!
That's a 20 year old sled, so it's not surprising that parts aren't available for it.
This “Old” M8000 makes my M7 feel real bad about herself
As far as M8000s go, it's pretty old!
Could u put a screw clamp/hose clamp on back side of the pipe,
There's more than one way to do it, for sure.
Is the light ac or dc?
Hi Matt!
Is it possible to run both the oem headlight and a led light off the connector at the same time you reckon?
I don't know exactly what bar that is or how much current it draws, it looks like a generic 7inch 18w led bar and that is totaly fine to run with the standard light. One thing you could do is upgrade the halogen to a Good LED bulb. As far as I can find Arctic cat uses a H4 bulb, there are some really good H4 LEDs out there :)
You could. Just have to do some math on the draw depending on your light.
Question: Why not just use frogskinz on both intake holes?
Fö att han hädde ett luftfilter genom huven så den skulle andas bättre, och det är därför filtret har en såndär ”socke” över filtret
Did you leave the headlights AC power? I had to convert my headlights to DC using the rectifier (I have E-start) to keep my LEDs from flickering like crazy.
I didn't. You can do that or you can get an LED with a ballast built in.
Хороший вариант 👍
Where are you in ab?
do you need to have a resistor mounted on the 2016 m8000 when you delete the headlight?
I'm gonna hook it up to DC power soon.
@@syxxes ok. i have 2 small led lights mounted on mine. have cut the original top to lower it a bit. and a small led bar on my bar. think i mounted a 100w resistor on it.
How much you want for your factory right side intake vent cover.? I ripped mine last nite...
I'm gonna be holding onto those for now, sorry!
@@syxxes no stress boss Kijiji came thru.. Someone was parting out a cat paid 5$ for the pair..
What 8s the purpose of a headlight delete
what is the pros of removing the headlights? after the video im asuming to get more air to the motor
Its a weight savings and asthetic thing mostly. I don't think the motor gets a whole lot more air this way.
I think I’m going to do mine but keep the headlights
What is the part number and where did you get that light bar?
It's just a generic light bar from Amazon.
How the f does limiting the intakes amount to more outake/performance?
Who said more power?
Is there any thing holding on the upper rear idlers wheels is it just the retaining clip I'm stumped anyone know if I'm missing something?
Check the parts diagram. Pretty sure it's just a c-clip
@@syxxesthanks bud for the info long time veiwer, new profile tho lost the password to the other one
This time I'm doing it to my sled too
nice!
Your m8 is making my F7 look like crap
Who’s orange sled
Is it the same on a 15 viper?
That will be different.
@@syxxes okey
Not to do with this video. But I have a 15 AC. What is there to do about the handlebar wobble.
It’s the adjustable handlebars. There’s a delete kit you can do that allows you to cut the shaft, install a new bracket and put fixed risers on and it eliminates about 99% of the slop.
You can upgrade the post to a solid post or get an adapter I think from RSI to get rid of the adjustable part.
I can't get into your store.
Will be back up soon! Down for maintenance.
that is sweet
Why couldn’t you just run both frog skinz and forget the filter
You might be able to. Once the snow starts to pile up on the dashboard the pod will be able to breath much better though
Powder coat those spindles black!!!
I ain't spending 200 bucks to make a green part black! 🤣😆
@@syxxes rattle can ;)
Don't think I'm a fan of the relocation headlight kit
Some people aren't.