Neato D7 Side Brush Repair: Cat broke it!
HTML-код
- Опубликовано: 16 окт 2024
- Our cat helped break our Neato D7 by riding on it and playing with the side brush.
This is a walkthrough of how fix a Neato D7 side brush by replacing the original o-ring which quickly wears out.
O-Ring Replacement
amzn.to/3aAnur5
Star T-Handle Hex Key: Primary driver needed to take apart the Neato
amzn.to/3dy4LhQ
Neato D7
amzn.to/2M6Y2jo
___________________________
My Equipment:
Gimbal
amzn.to/2OmhUjp
Microphones:
amzn.to/3jxrCuB
amzn.to/2LAhRQ0
Mounts and Stands:
amzn.to/3cVlg7o
amzn.to/36UOgrI
Wow bro, this was short, sweet and to the point. Thanks to your video, our vacuum brush is operational again. Greetings from the America of Europe (Switzerland)!
Thanks for the video, wouldn't have been able to do this repair without it. Love your cat too.
Awesome! Glad to hear it!
I would note it’s helpful to take a cotton swab with alcohol and clean the rubber debris from the pulleys.
Ah yeah that is a good idea. I've been having this one run in my workshop for a while and I might take it apart and see how cleaning that does
Thank you, I did this and now it runs like new, great video!
Awesome glad it helped
Thank you! I followed the instructions and now Betsy's side brush works again.
Awesome I am glad it helped.
Hi, great video. How much is the diameter of the o ring?
very helpful video 👍 with exchanging the belt on my D6
Thank you. Very helpful. Greetings from Germany. 😊
Soooo helpful! My hero!
Hello, thank you for the video. I managed to replace the O-ring and the cleaner is working.
2 rubber rektangulär rubbers size:10x7x5 mm fell out when disassembled, Cannot find any place for them!?
Anyway, the machine seem to be working without them.
Do you or somebody else have any idea where to put them?
Same here, but I had only 1 rubber left. And 2 screws😂. It works, though. I guess they are a cushion for the bumper. Did you find out where they go?
No I did not in spite of asking the Neato Customer care. Answer: "To be honest, we at customer care have never open the robot so far so we cannot tell you." OK, remains to contact a servicenter..."🙄😡
@@LOSADM02
Hello , i changed it for the second time , the first time it worked but this time the brush is not working ? Any ideas ? It could be the motor ?
Thank you for the video. I noticed that my D7 would fire up normally, but when the motor for the side brush kicked in, there was a horrible grinding noise. Followed your video to be able to access the motor, thinking that it may be covered in dust and hair. It wasn't that bad, but replaced the O ring as it looked a bit slack. Also cleaned out the gears (black box) attached to the wheel motor. However, it is still making that horrible grinding noise. Do you think the side brush motor might need changing?
I would recommend checking to verify the sound is coming from the side bush first and not the main brush or something else. You should be able to lift it up, hold the wheels down and cover the sensors to activate the bot and see if you can verify where the sound is coming from
Great video but guess what I did broke the dang ribbon cable connector. Any tips on a replacement? The ribbon is fine just the plastic connector.
Oh man sorry to hear that. Ribbon cables are always my worst fear when taking apart electronics. My guess is that they likely use a standard ribbon cable so there should be information printed on the cable that could lead you to a replacement. If you find a part number or something you could try Amazon. Or you might be able to get spares from their website or eBay
Much appreciated.
Hi. i changed, but its not working. Any idea?
Amazing video! Easy to follow. Thank you!!!
You're very welcome!
Thanks very much...problem solved 😀
Glad it helped
so what do i do if i did break the ribbon wire connector
Do you have any photos of the placement/positioning of the side brush sensor? It popped up when I wasn't looking and I didn't pay close enough attention to it beforehand to know exactly where it's installed. It looks like at 4:13 you lifted this out and looked at it, but I don't see where/when it was replaced and unfortunately it looks like your hand covered where it came from in the shot. Thanks!
Let me know if you still need it I could look thorough the extra footage or take it apart again
I fixed the o ring on my d5 the same way (it was definitely broken), but the sidebrush is still not spinning, what to do now?
Start the vacuum and lift the front slightly placing your hand near the side brush. Do you feel any movement from the brush?
If there is some movement there might be something impeding the movement when it was put back together.
I know some people have had to replace the motor. If all else fails you can buy a motor from Amazon and return it if it still doesn't work.
amzn.to/3wRNBSP
thank you, I'd like the video but it is at 69 now so, will keep like that, nice!
you are my god ha ha thank you!!!!!
Haha I hope the video was helpful
I had a screw missing but I swear I did the two on the motor and the one on the board so I’m confused lol
Lol, same happened to me. Then I realized there are three screws holding the motor in place.
Now I know that these small rectangular rubbers are actually not for chockabsorbing!
They are protecting the wires as you can see in this link: ruclips.net/video/OqgD7zuyLuA/видео.html" at 9minutes in to the movie!