The Case max GPU is 335mm anf the EVGA GeForce RTX 3070 FTW3 Ultra is 242mm and its a pretty huge Card given it has 3 fans so the PC Case has decent space
Got this case few day ago for 70 bucks really good case and the fan that come with it also work great and silently, but 2 cons are no front USB-C and the fan doesn't ARGB.
I really liked this case, has decent options and rgb lighting 🌈😎 On the cons side I just wish it had a usb type c conector on front panel and all the usb conectors at left side because it would be really convenient for easy access at these ports 🆗 Thanks very much for sharing this video! 💖 *Greetings from Costa Rica!* 🌴
This case is awesome, the fans suck and fall apart easy so be careful. The wires pull out so easy. I fit 3x140mm in the front, a 4090 FE and a 240mm radiator at the top. It's so cool literally
So how would I get the RGB on the fans working? Would I need to connect the molex cables to the PSU or do I need to do something more? Haven’t bought anything yet, just making sure with some prepping.
Have u figured this out? I’m stuck on this as well. Got everything else done but I’m not sure if the molex cable connects to the psu and as well as the tiny 4 pin that’s with the molex??
@@zelrius8714 hi I havnt got this case so I don’t really know what’s going on on your end. But I think that the molex cable which I think is a female 4 pin does connect to the PSU yes. But not 100% sure
Seems like a decent Budget Case but I would avoid it simply because not enough Drive mounting points. Also after building one Micro ATX Build I have had enough of small cases. Excellent video as always. Also it doesn't look half bad for a Budget Case either. 😉
I agree, not enough space, but I said it in the video that it's meant for simpler builds not something that you or me would be using 🤣 Also thanks man 👍
@@camotech1314 Dude I have 4 NVMe Drives 1 SSD and 2 HDD's in my Current System And I plan to add another 2 NVMe Drives and 2 more SSD's. So for someone like me as I said "Not enough Drive Mounts" And also as LevelUP said this is not something people like He or I would build in either.
I agree I need more storage space always. I got 4 NVME drives on board, 2 ssds and 2 HDDs in my PC. 2 external NVME drives in Sabrent enclosure via TypeC and I need more 😂
Hello, how do I install the gpu on the side?? This case has a slider thing and I have no clue what screw goes in either. Also confused on the molex cable in the back, can I just plug it into my psu(which I have) and then what about the other small cable with the molex that’s 4 pin, where do I connect that to? Or does it not need to connect to anything ?
good vid. so im interested in this case. but i dont understand how you plug the molex adapter thing up to the psu or motherboard? if i knew it would work for sure id probably go ahead and buy it
Im like 2 years late and doubt you will respond but how do the fans work. Is it just like a molex input from the psu and that's it or does anything go into the motherboard?
I recently ordered this case, but now since I'll be using a psu with different colour wires I'll use an extension cable. I liked the idea of putting the cables down the HDD bay. But where else can I put the hdd?
Sir plz reply ..i have an issue...i ordered a whole pc setup and this cabinet..my mobo is dead on arrival ..so i couldnot check the cabinet..and thn i tried paper clip trick..by shorting the green and black of 24pin..but only rgb light of the fan are working .not the fans ...so are the fan connected with the mobo..or fan are bad.. Plz reply
@@yuhaan7555 it's simple just connect the molex cable to the PSU molex and connect the reset wire to the reset switch (cabinet). Fans should run and and you should be able to change the colour using the led button on case. Don't connect them mobo. It's usless. The fans are better off set at maximum it gives good cooling
Morning,Afternoon, or evening,, at the 2:30 mark mines didn’t come with that power plug it only have to smaller 4pin plug. Is it a certain name for the extension cause I don’t see it on Amazon
So I have just ordered this case in white and I’ve heard a lot of people having problems with the included case fans, my psu I’ve got has got a molex so will I be okay using the stock fans? Or will it be a case of getting new fans
im pretty late to this video but the LED button on the top resets my pc instead of changing the LED. I cant find any other way to plug the wire in to get it to change the led. now my case LED is stuck at green and i cant change it :(
Remove wires from reset connector/pins 😁 and connect them to the RGB controller, then the button will be LED... You wired it like that, just undo it and all is good
I have a small gpu and it sags. There are no screws that hold it and the component that moves which I guess is supposed to hold it in place does a poor job.
Just pull from the bottom and it goes off, I don't know how I forgot about this 🤦♂️ But I can't remember if the cables are stuck to the panel or not, the ones for buttons and ports on top...
so in order for me to have rgb and fan controll via software i need to ditch those fans because they're molex? and get a 3 pin fans and connect them to the mobo aswel ?
@@0010plays There are several modes, there is the smooth one and there is also that skippy one as well, just cycle through them with the included button on the case 👍
Its not a good deal with those molex fans, they are very loud and can't change rgb with software or buttons. It would of been way better to have one in take and 1 out take 3 pins without rgb.
Wait so the included fans ARGB cannot be controlled by the motherboard? Oh God I just bought this, still in the box. Got to get that confirmed before I use it 🙊
Correct. The connector is proprietary. Accordingly the molex connector is the only way to connect the fans to power. And the rgb can only be controlled by the hijacked reset switch on the front io. I built in this case and for me it's great for what I paid for it IMHO but I'm not into a lot of rgb. And the sound to me isn't loud at all. But to each their own. If to you, you place a high amount of value of rgb control and speed control of the case fans to enable more silent operation then I'd probably consider a different case. Hope this helps.
@@shadylite how or where do I connect those ?? The molex and the small 4pin one with it ?? And what about the reset switch? Building in this case as a new builder and I’m so confused
@@zelrius8714 if it's your first build don't overcomplicate it to start. Just attach the molex and use the rgb controller that's built into the case. Later, if you want to control the rgb with your motherboard software, you'll have to remove the antec fans and replace them with standard RGB or aRGB fans and run the power to your motherboard and the RGB too your motherboard separately. For now, keep it simple. Just use the molex until you learn more. And honestly you may be happy with it just as it is.
@@LevelUPGamingTech Kada sam kupio nx 410 tražio sam klipove da vidim šta ljudi misle i kako ga sastavljaju i našao sam na tvoj video. I iste sekunde kao da sam osetio kroz blago izgovor reci da je ovo nas čovek. :) I zato svaka čast na klipu i samo nastavi tako.
Fucking just came here to try and find out HOW TO HOOK UP THE FRONT USB PORTS TO THE MOTHERBOARD… can’t find a video on that cause fuck me right, google keeps bringing me bullshit 10 minute videos like this one
The thing that is so easy to do, plus it is the same with every case and every motherboard, and yet you blame other people for your own "bullshit" calling osmeone eleses work bullshit, not cool man!
@@LevelUPGamingTech Exactly my point, easiest to do yet the most elusive to find. Every video to come up via google, is a copy & paste of this exact bullshit content & I’m just here to call it for what it is. You can be mad at it me being upset with it, or you can recognize exactly what I’m talking about.
@@LevelUPGamingTech The only way, what I’m saying conflicts with your video, is the lack of “universal” basic information. Which also applies to the multitude of other videos with the same content. Look perhaps you think I’m blaming you. I’m not, I’m struggling with the basics & every video including yours just skipped over it. And that’s what I find bullshit. That’s all.
Yo! This is VERY good review. Got most the info I need in 5mins.
Thanks dude 😎
The Case max GPU is 335mm anf the EVGA GeForce RTX 3070 FTW3 Ultra is 242mm and its a pretty huge Card given it has 3 fans so the PC Case has decent space
thanks for the review man. building in this soon!
Got this case few day ago for 70 bucks really good case and the fan that come with it also work great and silently, but 2 cons are no front USB-C and the fan doesn't ARGB.
LOL WHAT you turn on rgb using button next to power ON /OFF button and voilaaa
I really liked this case, has decent options and rgb lighting 🌈😎
On the cons side I just wish it had a usb type c conector on front panel and all the usb conectors at left side because it would be really convenient for easy access at these ports 🆗
Thanks very much for sharing this video! 💖
*Greetings from Costa Rica!* 🌴
Well you can't always have it all 😁
Thanks bro ✌️
This case is awesome, the fans suck and fall apart easy so be careful. The wires pull out so easy. I fit 3x140mm in the front, a 4090 FE and a 240mm radiator at the top. It's so cool literally
Hello, nice build you have congratulations, can you tell me your opinion on the case so far ?
Wait a Rtx 4090 can fit??
So how would I get the RGB on the fans working? Would I need to connect the molex cables to the PSU or do I need to do something more? Haven’t bought anything yet, just making sure with some prepping.
Molex for power nothing else
@@LevelUPGamingTech so how do I get the RGB working?
Have u figured this out? I’m stuck on this as well. Got everything else done but I’m not sure if the molex cable connects to the psu and as well as the tiny 4 pin that’s with the molex??
@@zelrius8714 hi I havnt got this case so I don’t really know what’s going on on your end. But I think that the molex cable which I think is a female 4 pin does connect to the PSU yes. But not 100% sure
so a nzxt 510 with front mesh..nice
Not quite, this one is smaller, I mean it has less depth than NZXT 😊
Seems like a decent Budget Case but I would avoid it simply because not enough Drive mounting points. Also after building one Micro ATX Build I have had enough of small cases. Excellent video as always. Also it doesn't look half bad for a Budget Case either. 😉
I agree, not enough space, but I said it in the video that it's meant for simpler builds not something that you or me would be using 🤣 Also thanks man 👍
Why, just switch to NVMe. They're cheap enough now, less heat and noise then SATA.
@@camotech1314 Dude I have 4 NVMe Drives 1 SSD and 2 HDD's in my Current System And I plan to add another 2 NVMe Drives and 2 more SSD's. So for someone like me as I said "Not enough Drive Mounts" And also as LevelUP said this is not something people like He or I would build in either.
I agree I need more storage space always. I got 4 NVME drives on board, 2 ssds and 2 HDDs in my PC. 2 external NVME drives in Sabrent enclosure via TypeC and I need more 😂
Hello, how do I install the gpu on the side?? This case has a slider thing and I have no clue what screw goes in either. Also confused on the molex cable in the back, can I just plug it into my psu(which I have) and then what about the other small cable with the molex that’s 4 pin, where do I connect that to? Or does it not need to connect to anything ?
No vertical GPU mount in this case
good vid. so im interested in this case. but i dont understand how you plug the molex adapter thing up to the psu or motherboard? if i knew it would work for sure id probably go ahead and buy it
Straight from the PSU and that's it, PSUs still come with molex cables, if modular at least one cable will have molex 👍
Hey man I need help here my case did not come with molex connector is there any one way to power the fans
What’s the components you used on this build? Please tell me everything with full details if you don’t mind 🙏🙏🙏
This case appears to be a less expensive version of the Lian Li LANCOOL 205 Mesh C case.
Hello sir, I need your help on choosing a PC case, antec nx410 or abkoncore c550m , my mobo is micro ATX b560m ds3h v2
Im like 2 years late and doubt you will respond but how do the fans work. Is it just like a molex input from the psu and that's it or does anything go into the motherboard?
Molex for the power and I think there was one cable to the board to control the speed or read the speed, honestly can't remember now 😁
Hey, should I choose a Sharkoon RGB HEX midi or this one? I'm not sure yet.
The new Antec NX200M is really good case!
Oh yes, newer models are so well designed 👍
I recently ordered this case, but now since I'll be using a psu with different colour wires I'll use an extension cable. I liked the idea of putting the cables down the HDD bay. But where else can I put the hdd?
You can still put 1 hdd down there and hide all the cables 👍 I mean without removing the cage
does it have fan controller?? in its box??
Sir plz reply ..i have an issue...i ordered a whole pc setup and this cabinet..my mobo is dead on arrival ..so i couldnot check the cabinet..and thn i tried paper clip trick..by shorting the green and black of 24pin..but only rgb light of the fan are working .not the fans ...so are the fan connected with the mobo..or fan are bad..
Plz reply
They are connected to the board then if that happened... RGB side of things is powered by Sata
@@LevelUPGamingTech the rgb light lf the fan are working..but the fan are not running...so which cable i need to connect..can u help me out plz
@@yuhaan7555 it's simple just connect the molex cable to the PSU molex and connect the reset wire to the reset switch (cabinet). Fans should run and and you should be able to change the colour using the led button on case.
Don't connect them mobo. It's usless. The fans are better off set at maximum it gives good cooling
at 2:46 there are cables on the bottom right that are stuck, how did you get those out?
There are no stuck cables they were just loose 👍
Morning,Afternoon, or evening,, at the 2:30 mark mines didn’t come with that power plug it only have to smaller 4pin plug. Is it a certain name for the extension cause I don’t see it on Amazon
Maybe they changed it to PWM then, if it's the smaller one. Like an updated version of the case came out 😀
@@LevelUPGamingTech appreciate it.. I joined you all's discord server
Welcome aboard 😀
@@LevelUPGamingTech thank you and i got all my fan lights up and going
Same here what did you end up doing?
this case's fans have cables that my mobo doesn't have ports for, and they dont seem to be on any mobo, it wont let my pc boot either :/
What's the cable? I have the white version of this case and my mobo had all of the ports. Only issue I had was that the RGB quit working.
@@geritisdale-brock7247 I fixed the issue, no clue what's missing, but it works fine and rgb does too
@@bigwoke5956How did you figure out the fan situation, I am having the same problem with my motherboard not having ports
So I have just ordered this case in white and I’ve heard a lot of people having problems with the included case fans, my psu I’ve got has got a molex so will I be okay using the stock fans? Or will it be a case of getting new fans
I mean I've seen people with no issues at all Exept that kolex apparently sucks but it's fine.
@@PopBunny8899 ye all good got it and built the pc and all fans look amazing😁
How can I connect that fans…? Molexto psu and the other cable where? I need to buy a cable to connect to motherboard?
How is the case going?
@@SergioRodriguez-ih5uu have u figured it out? I think the molex connects to the psu with another connector from the psu
im pretty late to this video but the LED button on the top resets my pc instead of changing the LED. I cant find any other way to plug the wire in to get it to change the led. now my case LED is stuck at green and i cant change it :(
Remove wires from reset connector/pins 😁 and connect them to the RGB controller, then the button will be LED... You wired it like that, just undo it and all is good
@@LevelUPGamingTechplease give a tutorial 🙏
Nice review. Alot people said theyr molex came broken on arrival. Are molex easy to break?
They should not exist anymore 😂 But not that easy to break, just flimsy too much...
Antec make some nice cases, I got a NX200M!😸
Will a dell ipcfl-vm motherboard be able to go into this case? And does that motherboard support a gold 700w power supply for this case swap im doing?
Board will fit and PSU fits as well 👍
@@LevelUPGamingTech thanks!
I have a small gpu and it sags. There are no screws that hold it and the component that moves which I guess is supposed to hold it in place does a poor job.
Will an rtx3070ti fit? it's 320mm long and the case's specs say it can fit gpu's up to 335mm.
Just wanted to make sure tho ;)
It will I did I stall MSI RX 5700XT which is 332mm 👍
@@LevelUPGamingTech damn nice, it should also make the gpu look bigger i guess
Thanks for the reply btw
Should I ditch the included fans and just use the 3 corsair fans I bought?
I would recommend that you do that 😉
Can we take of the front mesh panel to clean it? If yes, how?
Just pull from the bottom and it goes off, I don't know how I forgot about this 🤦♂️ But I can't remember if the cables are stuck to the panel or not, the ones for buttons and ports on top...
was it easy to take off and put back on?
would a 3070ti zotac trinity be able to fit?
I have a problem with the case, i can screw my motherboard in it.. its a B550 pro x v2 so normaly it needs to fit but the screws dont fit idk why :/
There are two types of screws in the pack, smaller and bigger thread sizes, try each one and see...
Are fans adressable with mobo?
Yess. Im controlling it with rgb fusion 2.0
Just bought it today
Yeap
so in order for me to have rgb and fan controll via software i need to ditch those fans because they're molex? and get a 3 pin fans and connect them to the mobo aswel ?
Exactly that 😁
Will this fit a 3070?
Yes it will, it fits my 2080Ti which is like massive tri slot card, and it fits with 1cm leftover 😂
How did you get the rgb to run smoothly like that
It's all connected on the included controller if I remember correctly, just connect all the cables and boom done 😂
@@LevelUPGamingTech for me the rgb doesn't go smoothly through the colors
@@0010plays There are several modes, there is the smooth one and there is also that skippy one as well, just cycle through them with the included button on the case 👍
@@LevelUPGamingTech I don't have the smooth one fsr
@@LevelUPGamingTech did yours come with a physical rgb controller because mine didn't
Hey I have this case and I am super confused with the fan connectors can someone help me
Mine dont have molex connector😢
guys should I buy this case ???
@@1183CARLOSwhat’s did u end up doing?
en este case puede entrar una micro atx? (m-atx) como a68e33 v2?
It accepts ATX and smaller ones like mATX or ITX as well 👍
How are the fans, are they loud?
Bearable 😁 they are OK, nothing more nothing less... I would suggest to get something better
@@LevelUPGamingTech Ou no det vud kost mi mach mor. :D In det kejs aj majt go for DF700 Flux.
Ju du vot ju vont den. DF700 iz definitli ej betr kejs 😂 😂
Nah man not much.
Can you recommend a case for 16gb ram 3060ti Intel i5 11400f and 1tb ssd and can you make it cheap
Or will it work
Any case will work, you haven't mentioned which motherboard as this will decide on the case size, based on the motherboard form factor 👍
@@LevelUPGamingTech it's the ASRock b560 pro 4ddr4b lga 1200
Also changed to a rtx 3050
Its not a good deal with those molex fans, they are very loud and can't change rgb with software or buttons. It would of been way better to have one in take and 1 out take 3 pins without rgb.
Yup I said that, molex in 2021, idk what were they thinking 😂
Wait so the included fans ARGB cannot be controlled by the motherboard? Oh God I just bought this, still in the box. Got to get that confirmed before I use it 🙊
Correct. The connector is proprietary. Accordingly the molex connector is the only way to connect the fans to power. And the rgb can only be controlled by the hijacked reset switch on the front io. I built in this case and for me it's great for what I paid for it IMHO but I'm not into a lot of rgb. And the sound to me isn't loud at all. But to each their own. If to you, you place a high amount of value of rgb control and speed control of the case fans to enable more silent operation then I'd probably consider a different case. Hope this helps.
@@shadylite how or where do I connect those ?? The molex and the small 4pin one with it ?? And what about the reset switch? Building in this case as a new builder and I’m so confused
@@zelrius8714 if it's your first build don't overcomplicate it to start. Just attach the molex and use the rgb controller that's built into the case. Later, if you want to control the rgb with your motherboard software, you'll have to remove the antec fans and replace them with standard RGB or aRGB fans and run the power to your motherboard and the RGB too your motherboard separately. For now, keep it simple. Just use the molex until you learn more. And honestly you may be happy with it just as it is.
@Antec we need a NX201 a nx200 with 410 front mesh and put io at the side #antec #antecNX200M
Can a 6800xt and 240mm Aio fit in this case
240 AIO yes, cards up to 320-330mm if I remember, I know I said it somewhere in the video 😁
a 4070 and ryzen 9 build is able to fit in that
was making sure a 4070 could fit sweet🙏
Nice to know
Can it support micro atx?
Yes it can 🙌
@@LevelUPGamingTech will it fit rtx 3060 ti too?
@@Joshtech911 I don't see why not 😉
noice
Smort 😂
@@LevelUPGamingTech stronk
Can i put 2 hdd 3.5 inch
Yes one in the cage one on top of the cage
@@LevelUPGamingTech why not in hdd bay
HDD cage = HDD bay 🙂
You are from Serbia or some Balkans country :)
Hahah correct on both 😂
@@LevelUPGamingTech Kada sam kupio nx 410 tražio sam klipove da vidim šta ljudi misle i kako ga sastavljaju i našao sam na tvoj video. I iste sekunde kao da sam osetio kroz blago izgovor reci da je ovo nas čovek. :) I zato svaka čast na klipu i samo nastavi tako.
@@Filippo_1717 Hvala hvala 😉
Fucking just came here to try and find out HOW TO HOOK UP THE FRONT USB PORTS TO THE MOTHERBOARD… can’t find a video on that cause fuck me right, google keeps bringing me bullshit 10 minute videos like this one
The thing that is so easy to do, plus it is the same with every case and every motherboard, and yet you blame other people for your own "bullshit" calling osmeone eleses work bullshit, not cool man!
@@LevelUPGamingTech Exactly my point, easiest to do yet the most elusive to find. Every video to come up via google, is a copy & paste of this exact bullshit content & I’m just here to call it for what it is. You can be mad at it me being upset with it, or you can recognize exactly what I’m talking about.
You are still upset with something that is UNIVERSAL and has nothing to do with my video and this case in particular, just happens you have it
@@LevelUPGamingTech The only way, what I’m saying conflicts with your video, is the lack of “universal” basic information. Which also applies to the multitude of other videos with the same content. Look perhaps you think I’m blaming you. I’m not, I’m struggling with the basics & every video including yours just skipped over it. And that’s what I find bullshit. That’s all.
@@Kurrizmahhjust built a pc with this case. Lmk if you haven’t figured it out, would be happy to help cause I also had trouble finding this info!
Will it fit a 4090?
Gigabyte GeForce RTX 4090 or MSI RTX 4090 Ventus 3X OC will fit.
Most other cards are too big...
@@HelloHelloHell-o if a 4090 can fit, every other card can fit no? isn't the 4090 the biggest GPU out there?
@@johndank2209 Every brand has a different size