The float housing has two water floats and a temperature sensor. The floats control the amount of water that flows into the water tray and when the machine cycles into harvest.
Good video ! Have not seen one of these yet. any good ? What ice machine would you recommend for a 22" wide ice dispenser. 15 year old iceomatic at end of its life. evap grid all loose. 3 min harvest. won't release. time to replace machine. ice 0520HA3 there right now.
@@IceMachine411 thanks. you got a model u would recommend ? Manitowoc 22" wide to go on top of a dispenser ? Half cube. self contained. air cooled. 400-500 lb / day. 115 volt.
I know this isn’t the answer you want and I apologize in advance. I’m pretty inexperienced in matching dispensers and ice machines. I recently dealt with a mismatch between a Scotsman nugget machine and Pepsi dispenser. I would hate to lead you down the wrong path. The dispenser manufacturers can tell you which ice machines are best for each dispenser. Although I believe you’re on the right track. I don’t see why a 22 inch ice machine won’t match a 22 inch wide dispenser. There may be a bin adaptor that’s required in order for the ice machine to sit properly. There may also be a requirement for some sort of bin level control to keep the ice level lower than it would normally be. Additionally, I might be wrong, best to contact the manufacturer. 😉 Hope this helps. 🤞
Very good video.. Thank u for show us all the parts and how to install them.
You’re welcome.
Great video as always. Good Job and Nice Work. Thank you for sharing. May I ask, What is float housing and what is does ?
The float housing has two water floats and a temperature sensor. The floats control the amount of water that flows into the water tray and when the machine cycles into harvest.
Nice job 👍👍👍
💪🛠️
My unit freezes but won’t go into harvest Could a bad prob be the reason why it won’t go into harvest , low float light never comes on
Sounds like you’ve figured it out. The low water float is what sends the machine into harvest.
Good video ! Have not seen one of these yet. any good ? What ice machine would you recommend for a 22" wide ice dispenser. 15 year old iceomatic at end of its life. evap grid all loose. 3 min harvest. won't release. time to replace machine. ice 0520HA3 there right now.
Not the biggest fan of them. I’d recommend a Manitowoc.
@@IceMachine411 thanks. you got a model u would recommend ? Manitowoc 22" wide to go on top of a dispenser ? Half cube. self contained. air cooled. 400-500 lb / day. 115 volt.
@@IceMachine411 Manitowoc IYT0420A Indigo NXT Ice Machine, Air-Cooled, Half Dice, 460 lbs. Production, 115V, 22". i'm looking at this one. sound about right ?
I know this isn’t the answer you want and I apologize in advance. I’m pretty inexperienced in matching dispensers and ice machines. I recently dealt with a mismatch between a Scotsman nugget machine and Pepsi dispenser. I would hate to lead you down the wrong path. The dispenser manufacturers can tell you which ice machines are best for each dispenser.
Although I believe you’re on the right track. I don’t see why a 22 inch ice machine won’t match a 22 inch wide dispenser. There may be a bin adaptor that’s required in order for the ice machine to sit properly. There may also be a requirement for some sort of bin level control to keep the ice level lower than it would normally be. Additionally, I might be wrong, best to contact the manufacturer. 😉
Hope this helps. 🤞
Ice machine master tech
Hardly. I’m just a dude that works on ice machines.
Hi sir ..pc broad can modify to relay ??
I’m not sure. 🤔
bro can you help me about ice o matic. the unit is very fast to getting hot gas and the evaporator not making ice what possible cause the problem
I would need way more information than that to help you out.
I'll try to remove one harness of floating switch they built the ice but not harvesting