Thanks for the video and showing the cooling method. However it costed me some time to find out, how to manage the firmware upgrade, as you didn't show the full process properly - and obscured the simply procedure. In my case, the first USB-Stick didn't work, as its capacity (32 GB) supposedly was too large. After I dug out and tried a 1GB (FAT32, 4K blocks) Stick, the upgrade worked. So: 1. Format a 1GB USB stick (FAT32, 4096 Bytes/Block), copy upgrade_loader.pkg to it and plug it into the board with power cable disconnected. 2. Apply the cooler spray to both chips. 3. Power the board up to standby. If it automatically turns on, alter the settings in the menu to go to standby on power on and try again (with step 2). 4. Press on the remote control and then . A more rapidly blinking LED indicates that the flashing is going on (about 50sec in my case). After that it alters to slow blinking and the TV can be turned on via RC and has the updated firmware on it.
Thank you very much! Though I'd already got the Core Update from Vestel site, I didn't know I had to press and hold the OK button: you gave me the right hint. No need to freeze the EEPROM chips in my case.
It's amazing I just upload to the usb stick only the core upload from vestels main page and after the upgrade everything was ok!The main problem was no sound no backlighting no vcc main voltage to the tcon board all voltages from power board ok and all voltages from the dc to dc converters of the main board ok. The broblem was that the main proccessor could't boot up to give the control commands for all the peripheral devices like backlight on-off Panel vcc on-off etc. The Tv set Was a Greek brand TURBOX TXV4010 with main board 17mb82s and panel VES400UNDS-02-B. Thank you for everything
Kosta pos to eftiakses? vazo to upgrade loader.pkg sto flasaki kai den vriskei to update, me poion tropo to ekanes? exo mia turbox 32ara pou kano tama gia na anapsei
23"' local brand with same PSU and Main Board as on video.Very helpful. Initially believed it is a faulty / shorted power supply since a sizzling altered frequency like noise came from PSU. I did all steps as shown in video and made the happy repairer's dance at the end :).Make sure when extracting the master file from the zipped folder that you place it as a single file not folder on the usb stick.Thumbs up and Thank you to MrReeceyburger123
do you have a link to the core files please , i have a isis 39227FHDDLED tv that is constantly restarting , do you think this would cure it ? it has the 17mb82s board
+kolafoskolafos Πρέπει να έχω το ίδιο πρόβλημα με εσένα...έχουμε αγοράσει και εμείς Turbo-X...δεν νομίζω όμως ότι έχω καταλάβει ακριβώς τι πρέπει να κάνω...μήπως μπορείς να με βοηθήσεις;
+Mara Honey Πρεπει να μπεις στην σελιδα www.vesteldriver.com/TV_MB82_CORE_UPDATE.html και να πατησεις εκει που λεει YAZILIM INDIR, μετα πατας στο καθετο βελακι για να κατεβασεις το αρχειο που χρειαζεσαι, το οποιο ειναι σε μορφη .rar (δηλαδη θα χρειαστει να το αποσυμπιεσεις) μεσα στο ραρ υπαρχει ενας φακελος και μεσα στο φακελο το αρχειο της αναβαθμισης με το ονομα upgrade_loader.pkg, τωρα παιρνεις ενα στικακι το κανεις φορματ για να ειναι τελειως αδειο και βαζεις μονο αυτο το αρχειο μεσα, στη συνεχεια το βαζεις στην θυρα usb της τηλεορασης την αναβεις και καθως αναβοσβηνει το λεντακι της κρατας πατημενο το ΟΚ στο τηλεκοντρολ μεχρι το λεντακι να ξεκινησει να αναβοσβηνει πιο γρηγορα και περιμενεις να κανει την αναβαθμιση (αν το προβλημα σου ηταν το Firmware μολις τελειωσει θα μπορεις να την ανοιξεις... αλλιως καπου αλλου βρισκετε το προβλημα) ((ΟΛΑ ΑΥΤΑ ΤΑ ΚΑΝΕΙΣ ΜΟΝΟ ΑΝ ΕΧΕΙΣ ΤΗΝ ΙΔΙΑ ΠΛΑΚΕΤΑ 17ΜΒ82))
Αρχικα δεν τι μοντελο ειναι η τηλεοραση σου(το γραφει λογικα πισω σε μια ετικετα) για να δεις τι πλακετα εχεις πρεπει να ξεβιδωσεις το πισω μερος της τηλεορασης και να διαβασεις το μοντελο της... αν εχεις διαφορετικο μοντελο της ιδιας εταιριας ισως να υπαρχει το αρχειο αναβαθμισης και να ακολουθησεις την ιδια διαδικασια...
I did manage to get one of these TVs (different brand but similar board) to load the upgrade file off of the USB drive exactly how you did (even without freezing the EEPROM chips), however it only worked once, meaning that after I switched it off with the remote, I couldn't get it to turn on a second time - it had gone back to flashing the led again. Even if I put in the USB drive again and do the whole procedure over, when the led stops blinking rapidly, the set doesn't come on like it did the first time - it just blinks slowly forever. What did I do wrong ? Was I supposed to factory-reset it ? I'm actually kinda pissed because I almost had it >_> Switch to badcaps if you think you can help me (haven't created a thread yet, but I assume you know who I am :)) )
I have a logik l24hedw15 with a 17MB82S, the tv goes goes into it's loading screen (the Logik logo), but then it goes back into standby and back into the load screen once more, rinse and repeat. Any ideas? I put the core update on a usb drive but it just does the same thing again. Thanks for any help.
So, I managed to find the update .pkg file, put it in an USB FAT32 formated drive, and do the "power ON while OK button pressed" and.... Doesn't work. Just boot up the TV normaly without any changes. Any help ?
Hello! i have the same problem with MB82, and in 10:25-...in this video, you are on Vestel driver website, and you have the TABLE with TV models, i cant get this TABLE, can you help me?
I've got a TV with the exact same boards, the only difference is that mine's not doing ANYTHING - it's like totally dead. Funny thing is that the power supply seems to be working fine: 12v, 5v Stand-by and even 24v for the LEDs are all present, but other than that, nothing else - not even the LED wants to flash (yes, the LED itself is good - i tried it :)) ). Is the main board dead just like that, without even a blinking LED ? :| When I try powering it on, the voltage for the backlight doesn't shoot up to 100 something volts either (it stays at 24), so I'm pretty sure the main board's not turning on the power supply. Any thoughts ? Cheers.
Don't bother - I doubt we're even on the same continent :)) It belongs to a client, so I couldn't have given it away anyway and even if they somehow agreed to let me have it, I would've kept it for spare parts myself. Cheers :D
All of the links you clicked in this video to get the firmware related to your Google Drive. Meaning you have saved them on your Google Drive, and you weren't downloading them directly from a specific Vestel (or other) website. Can you provide the source URL's for the firmware updates? I have noticed that many have already requested this information, but you haven't responded to their requests.
Hey, nice video. I found it while looking for the firmware for my tv, mine is branded telefunken but the boards and panel are the same. Did you succeed in dumping the firmware after you fixed yours? Mine won't boot even if I freeze the ics.If you have it can you upload it somewhere and share it?
+Video Riparatore Hey, I didn't dump the firmware sorry, have you tried freezing the Ic's then loading the mboot ? Also are your voltages correct these TV's flash the Led if a voltage fails. I had a Techwood that wouldn't turn on and flashed the stby Led was due to no 24v/shorted diode on Psu.
Hi,I have a digihome 32180SMHDLED with the same problem17MB95S-1 main boardf/w 23172047chassis ves315wnds-01Could you tell me where I could get this file.Great videos very informative.kind regardsPatrick.
Hi thanks for the comment, there is no such file for 17mb95. Luckily I have the firmware for it but I bet that its not the firmware at fault on your Tv. Check this ebay repair kit out it fixes flashing Led on 17mb95:www.ebay.co.uk/itm/VESTEL-17MB95-ALL-VERSIONS-A-V-BOARD-1-PART-REPAIR-KIT-PLEASE-READ-ADVERT-/331854615227?hash=item4d441392bb:g:vZsAAOSw6oBXEj5gAlso here is the firmware for your set might fix it temporally but you should buy the ebay repair kit to sort the issue properly:www.badcaps.net/forum/showthread.php?t=52483
Hi,I had another look at my tv.I noticed when you plug in the tv the standby light flashes as normal maybe 6-7 times then does it again,and then the light goes off as if the tv has switched on but there is no picture/sound,It's as though it's trying to start but cannot.Any ideas?ThanksPatrick.
That webpage no longer exist, you can download the firmware from here: elektrotanya.com/vestel_17mb82-2_v.0.8.4_core_update_firmware.zip/download.html#dl
Hi , found the file thank you, cured it (could figure the language out on that site found it through one of your replies on badcaps (i'm also a member)
Thanks for the video and showing the cooling method. However it costed me some time to find out, how to manage the firmware upgrade, as you didn't show the full process properly - and obscured the simply procedure.
In my case, the first USB-Stick didn't work, as its capacity (32 GB) supposedly was too large. After I dug out and tried a 1GB (FAT32, 4K blocks) Stick, the upgrade worked. So:
1. Format a 1GB USB stick (FAT32, 4096 Bytes/Block), copy upgrade_loader.pkg to it and plug it into the board with power cable disconnected.
2. Apply the cooler spray to both chips.
3. Power the board up to standby. If it automatically turns on, alter the settings in the menu to go to standby on power on and try again (with step 2).
4. Press on the remote control and then . A more rapidly blinking LED indicates that the flashing is going on (about 50sec in my case). After that it alters to slow blinking and the TV can be turned on via RC and has the updated firmware on it.
Thank you very much! Though I'd already got the Core Update from Vestel site, I didn't know I had to press and hold the OK button: you gave me the right hint. No need to freeze the EEPROM chips in my case.
It's amazing I just upload to the usb stick only the core upload from vestels main page and after the upgrade everything was ok!The main problem was no sound no backlighting no vcc main voltage to the tcon board all voltages from power board ok and all voltages from the dc to dc converters of the main board ok. The broblem was that the main proccessor could't boot up to give the control commands for all the peripheral devices like backlight on-off Panel vcc on-off etc. The Tv set Was a Greek brand TURBOX TXV4010 with main board 17mb82s and panel VES400UNDS-02-B. Thank you for everything
Yeah common issue on these is a shorted Cpu due to over heating.
Kosta pos to eftiakses? vazo to upgrade loader.pkg sto flasaki kai den vriskei to update, me poion tropo to ekanes? exo mia turbox 32ara pou kano tama gia na anapsei
@@gianniskotsou7350 theos
Μηπως τελικα το εφτιαξες αδερφε; @@gianniskotsou7350
23"' local brand with same PSU and Main Board as on video.Very helpful. Initially believed it is a faulty / shorted power supply since a sizzling altered frequency like noise came from PSU. I did all steps as shown in video and made the happy repairer's dance at the end :).Make sure when extracting the master file from the zipped folder that you place it as a single file not folder on the usb stick.Thumbs up and Thank you to MrReeceyburger123
+Hitar Petar Awesome, glad to help. Thanks for the feedback :)
do you have a link to the core files please , i have a isis 39227FHDDLED tv that is constantly restarting , do you think this would cure it ? it has the 17mb82s board
I had the same problem with a Turbo-X tv here in greece... i update the core as u discribe and its booting again!!! Thank u very much!
No worries glad to help you :)
+kolafoskolafos Πρέπει να έχω το ίδιο πρόβλημα με εσένα...έχουμε αγοράσει και εμείς Turbo-X...δεν νομίζω όμως ότι έχω καταλάβει ακριβώς τι πρέπει να κάνω...μήπως μπορείς να με βοηθήσεις;
+Mara Honey Πρεπει να μπεις στην σελιδα www.vesteldriver.com/TV_MB82_CORE_UPDATE.html
και να πατησεις εκει που λεει YAZILIM INDIR, μετα πατας στο καθετο βελακι για να κατεβασεις το αρχειο που χρειαζεσαι, το οποιο ειναι σε μορφη .rar (δηλαδη θα χρειαστει να το αποσυμπιεσεις) μεσα στο ραρ υπαρχει ενας φακελος και μεσα στο φακελο το αρχειο της αναβαθμισης με το ονομα upgrade_loader.pkg, τωρα παιρνεις ενα στικακι το κανεις φορματ για να ειναι τελειως αδειο και βαζεις μονο αυτο το αρχειο μεσα, στη συνεχεια το βαζεις στην θυρα usb της τηλεορασης την αναβεις και καθως αναβοσβηνει το λεντακι της κρατας πατημενο το ΟΚ στο τηλεκοντρολ μεχρι το λεντακι να ξεκινησει να αναβοσβηνει πιο γρηγορα και περιμενεις να κανει την αναβαθμιση (αν το προβλημα σου ηταν το Firmware μολις τελειωσει θα μπορεις να την ανοιξεις... αλλιως καπου αλλου βρισκετε το προβλημα) ((ΟΛΑ ΑΥΤΑ ΤΑ ΚΑΝΕΙΣ ΜΟΝΟ ΑΝ ΕΧΕΙΣ ΤΗΝ ΙΔΙΑ ΠΛΑΚΕΤΑ 17ΜΒ82))
Πως βλέπω τι πλακέτα έχω και αν έχω διαφορετική μπορώ να ακολουθήσω παρόμοια διαδικασία; Σε ευχαριστώ πολύ για την απάντηση σου.
Αρχικα δεν τι μοντελο ειναι η τηλεοραση σου(το γραφει λογικα πισω σε μια ετικετα) για να δεις τι πλακετα εχεις πρεπει να ξεβιδωσεις το πισω μερος της τηλεορασης και να διαβασεις το μοντελο της... αν εχεις διαφορετικο μοντελο της ιδιας εταιριας ισως να υπαρχει το αρχειο αναβαθμισης και να ακολουθησεις την ιδια διαδικασια...
What was going on at the start??
You was trying to copy software from the tv to the formatted usb drive ?? Why ??
To get the mboot file??
I did manage to get one of these TVs (different brand but similar board) to load the upgrade file off of the USB drive exactly how you did (even without freezing the EEPROM chips), however it only worked once, meaning that after I switched it off with the remote, I couldn't get it to turn on a second time - it had gone back to flashing the led again. Even if I put in the USB drive again and do the whole procedure over, when the led stops blinking rapidly, the set doesn't come on like it did the first time - it just blinks slowly forever. What did I do wrong ? Was I supposed to factory-reset it ? I'm actually kinda pissed because I almost had it >_> Switch to badcaps if you think you can help me (haven't created a thread yet, but I assume you know who I am :)) )
Can you explain why freezing helps it boot? What is the chance of it going wrong again after flashing?
I have a logik l24hedw15 with a 17MB82S, the tv goes goes into it's loading screen (the Logik logo), but then it goes back into standby and back into the load screen once more, rinse and repeat. Any ideas? I put the core update on a usb drive but it just does the same thing again.
Thanks for any help.
I have TV with the same board, would this firmware work on my TV? My TV is Made by Vestel.
So, I managed to find the update .pkg file, put it in an USB FAT32 formated drive, and do the "power ON while OK button pressed" and.... Doesn't work. Just boot up the TV normaly without any changes.
Any help ?
17MB82 core dump is available on the internet.
@MrReeceyburger123 Hi, can you tell me where I can find LCD Panel for this sort of TV? it's ves315wndl-02 and I broke mine while repairing backlight
Hi there! i have the same problem and i cant find the core update from vestels page..i have VES315WNDB-02 and 17MB82S. any help??
i press the OK button and it doesn't flashing faster the light to go to update mode. any suggestion?
Is it possible to access the menu and install firmware without a remote? Great video.
Nope 🥲
Worked a treat for about an hour then it wouldn't turn back on again? Overheating?
gOOD. works very well. thank you
Hi could you help me with acquiring firmware for LUXOR LUX0140001b/01 I have the original main with all numbers visible on board and screen
Panel VES400UNES-05-B 23159595 VEL_LCM VES400UNES-05-B_WODBEF 40125 62
MAINBOARD 17MB59S-1 V.1 211212 23148596 03443 V314h L11 AS 509 FATMA Y
I cant find any sorry.
That should read 17MB95S-1
Hello!
i have the same problem with MB82, and in 10:25-...in this video, you are on Vestel driver website, and you have the TABLE with TV models, i cant get this TABLE, can you help me?
+Владлен Полежаев Hello the firmware core update used in the video works on ALL 17MB82 boards mate :)
please tell me the Turkish site from which you downloaded the firmware.
I've got a TV with the exact same boards, the only difference is that mine's not doing ANYTHING - it's like totally dead. Funny thing is that the power supply seems to be working fine: 12v, 5v Stand-by and even 24v for the LEDs are all present, but other than that, nothing else - not even the LED wants to flash (yes, the LED itself is good - i tried it :)) ). Is the main board dead just like that, without even a blinking LED ? :| When I try powering it on, the voltage for the backlight doesn't shoot up to 100 something volts either (it stays at 24), so I'm pretty sure the main board's not turning on the power supply. Any thoughts ? Cheers.
Its the cpu that's died, they get very hot and short it my guess never been able to fix one like that sorry. Replace the mb.
Yeah thought so....it's not mine anyway, so it's most likely going in the trash :))
Ahh don't trash it, think of the environment !
Where about are you I might possibly be interested in it ?
Don't bother - I doubt we're even on the same continent :)) It belongs to a client, so I couldn't have given it away anyway and even if they somehow agreed to let me have it, I would've kept it for spare parts myself. Cheers :D
All of the links you clicked in this video to get the firmware related to your Google Drive.
Meaning you have saved them on your Google Drive, and you weren't downloading them directly from a specific Vestel (or other) website.
Can you provide the source URL's for the firmware updates?
I have noticed that many have already requested this information, but you haven't responded to their requests.
Vestel driver site gone ?
hi i cannot access that vestel site and finding it impossible to find that file anywhere could you give me any help please ?
Is this vestel site gone ?
Hey, nice video. I found it while looking for the firmware for my tv, mine is branded telefunken but the boards and panel are the same. Did you succeed in dumping the firmware after you fixed yours? Mine won't boot even if I freeze the ics.If you have it can you upload it somewhere and share it?
+Video Riparatore Hey, I didn't dump the firmware sorry, have you tried freezing the Ic's then loading the mboot ? Also are your voltages correct these TV's flash the Led if a voltage fails. I had a Techwood that wouldn't turn on and flashed the stby Led was due to no 24v/shorted diode on Psu.
Where I can find the boot folder ? I lock everywhere
Check google for 17mb82 core update.
can you point my in the right direction for software LUX0150001B/01 ?
17MB95S-1 170912 LUX0150001B/01
Hi,I have a digihome 32180SMHDLED with the same problem17MB95S-1 main boardf/w 23172047chassis ves315wnds-01Could you tell me where I could get this file.Great videos very informative.kind regardsPatrick.
Hi thanks for the comment, there is no such file for 17mb95. Luckily I have the firmware for it but I bet that its not the firmware at fault on your Tv. Check this ebay repair kit out it fixes flashing Led on 17mb95:www.ebay.co.uk/itm/VESTEL-17MB95-ALL-VERSIONS-A-V-BOARD-1-PART-REPAIR-KIT-PLEASE-READ-ADVERT-/331854615227?hash=item4d441392bb:g:vZsAAOSw6oBXEj5gAlso here is the firmware for your set might fix it temporally but you should buy the ebay repair kit to sort the issue properly:www.badcaps.net/forum/showthread.php?t=52483
Open both links and try it out on your Tv. Hopefully you can sort it.
Fantastic mate,Thanks for your speedy reply.As you say these vestel TV's are a joke,it's as though they are built to fail.Many thanks.Patrick.
Hi,I had another look at my tv.I noticed when you plug in the tv the standby light flashes as normal maybe 6-7 times then does it again,and then the light goes off as if the tv has switched on but there is no picture/sound,It's as though it's trying to start but cannot.Any ideas?ThanksPatrick.
You should check this out mate, sounds like a failed led to me:ruclips.net/video/RxwdC7V5Ue0/видео.html
Ma chi ti ha insegnato a filmare? a vedere sto video mi é venuta la nausea, oltre a non inquadrare quello che facevi hai tremato tutto il tempo!
I'm going to throw up.. hold firm the camera please!
bitmorse good
OMG! Why you made those sounds. I'm sick. I like your video, but...
toni nica too much cocain up my nose
MIRC
Salah Electro Mercedes ???
That webpage no longer exist, you can download the firmware from here:
elektrotanya.com/vestel_17mb82-2_v.0.8.4_core_update_firmware.zip/download.html#dl
Thank you ☺️
do you have a link to the core files please , i have a isis 39227FHDDLED tv that is constantly restarting , do you think this would cure it ?
Yes this video will cure that, please watch it to find out where t get the core files. Let me know how it goes.
Hi , found the file thank you, cured it (could figure the language out on that site found it through one of your replies on badcaps (i'm also a member)
Nice work, now remember turn down the backlights if not the Leds in the screen will fail next ! Also whats your badcaps name ?
first thing i always do now is backlights down , discovered that once to my cost, badcaps ""piccy"" not as active as you though
Haha ok mate cool.